Release 3.2 kernel issue tracking thread


notaz said:
carport888 said:
Is there any way to bring gamepad/game controller support to the new kernel?
Click to expand...
They should be supported, can you post dmesg output? Also, how are you testing/using the pads?
Click to expand...

I'm not sure how to post dmesg output...how do I do this?


I am testing by scanning for devices within PCSX ReARMed, PicoDrive, and qjoypad. In the old kernel, all three of these programs detect and function with no problem, but in the new kernel none of these programs detect any gamepad present.
 
Here it is:

dan-openpandora:~$ dmesg


[ 0.000000] Linux version 3.2.17 (notaz@pixelinis) (gcc version 4.3.3 (Sourcery G++ Lite 2009q1-203) ) #649 Thu May 24 02:31:09 EEST 2012


[ 0.000000] CPU: ARMv7 Processor [411fc083] revision 3 (ARMv7), cr=10c5387d


[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT nonaliasing instruction cache


[ 0.000000] Machine: Pandora Handheld Console


[ 0.000000] Reserving 8388608 bytes SDRAM for VRAM


[ 0.000000] Memory policy: ECC disabled, Data cache writeback


[ 0.000000] On node 0 totalpages: 127488


[ 0.000000] free_area_init_node: node 0, pgdat c04aa558, node_mem_map c04d0000


[ 0.000000] Normal zone: 1024 pages used for memmap


[ 0.000000] Normal zone: 0 pages reserved


[ 0.000000] Normal zone: 126464 pages, LIFO batch:31


[ 0.000000] OMAP3430/3530 ES3.1 (l2cache iva sgx neon isp )


[ 0.000000] Clocking rate (Crystal/Core/MPU): 26.0/332/500 MHz


[ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768


[ 0.000000] pcpu-alloc: [0] 0


[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 126464


[ 0.000000] Kernel command line: ubi.mtd=4 ubi.mtd=3 root=ubi0:rootfs rootfstype=ubifs rw rootflags=bulk_read vram=6272K omapfb.vram=0:3000K mmc_core.removable=0 quiet


[ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)


[ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)


[ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)


[ 0.000000] Memory: 498MB = 498MB total


[ 0.000000] Memory: 500492k/500492k available, 23796k reserved, 0K highmem


[ 0.000000] Virtual kernel memory layout:


[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)


[ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)


[ 0.000000] vmalloc : 0xe0800000 - 0xf8000000 ( 376 MB)


[ 0.000000] lowmem : 0xc0000000 - 0xe0000000 ( 512 MB)


[ 0.000000] modules : 0xbf000000 - 0xc0000000 ( 16 MB)


[ 0.000000] .text : 0xc0008000 - 0xc043fcbc (4320 kB)


[ 0.000000] .init : 0xc0440000 - 0xc0470000 ( 192 kB)


[ 0.000000] .data : 0xc0470000 - 0xc04aac00 ( 235 kB)


[ 0.000000] .bss : 0xc04aac24 - 0xc04cfa24 ( 148 kB)


[ 0.000000] SLUB: Genslabs=11, HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1


[ 0.000000] NR_IRQS:410


[ 0.000000] IRQ: Found an INTC at 0xfa200000 (revision 4.0) with 96 interrupts


[ 0.000000] Total of 96 interrupts on 1 active controller


[ 0.000000] OMAP clockevent source: GPTIMER1 at 32768 Hz


[ 0.000000] sched_clock: 32 bits at 32kHz, resolution 30517ns, wraps every 131071999ms


[ 0.000000] Console: colour dummy device 80x30


[ 0.000000] console [tty0] enabled


[ 0.000244] Calibrating delay loop... 497.82 BogoMIPS (lpj=1941504)


[ 0.039093] pid_max: default: 32768 minimum: 301


[ 0.039489] Mount-cache hash table entries: 512


[ 0.040039] Initializing cgroup subsys devices


[ 0.040100] CPU: Testing write buffer coherency: ok


[ 0.040374] hw perfevents: enabled with ARMv7 Cortex-A8 PMU driver, 5 counters available


[ 0.041412] devtmpfs: initialized


[ 0.059661] print_constraints: dummy:


[ 0.060180] NET: Registered protocol family 16


[ 0.060638] GPMC revision 5.0


[ 0.064941] OMAP GPIO hardware version 2.5


[ 0.069641] omap_mux_init: Add partition: #1: core, flags: 0


[ 0.078063] Reprogramming SDRC clock to 332000000 Hz


[ 0.081176] hw-breakpoint: debug architecture 0x4 unsupported.


[ 0.090820] omap-mcbsp.2: alias fck already exists


[ 0.091278] omap-mcbsp.3: alias fck already exists


[ 0.093231] OMAP DMA hardware revision 4.0


[ 0.115661] bio: create slab <bio-0> at 0


[ 0.117370] print_constraints: vwlan: 1800 mV


[ 0.119537] SCSI subsystem initialized


[ 0.122924] usbcore: registered new interface driver usbfs


[ 0.123260] usbcore: registered new interface driver hub


[ 0.123596] usbcore: registered new device driver usb


[ 0.125549] omap_i2c omap_i2c.1: bus 1 rev1.3.12 at 2600 kHz


[ 0.129547] twl4030: PIH (irq 7) chaining IRQs 368..375


[ 0.129669] twl4030: power (irq 373) chaining IRQs 376..383


[ 0.130401] twl4030: gpio (irq 368) chaining IRQs 384..401


[ 0.131011] _omap_mux_init_gpio: Could not set gpio192


[ 0.132415] _omap_mux_init_gpio: Could not set gpio193


[ 0.135955] print_constraints: VUSB1V5: 1500 mV normal standby


[ 0.136810] print_constraints: VUSB1V8: 1800 mV normal standby


[ 0.137695] print_constraints: VUSB3V1: 3100 mV normal standby


[ 0.139648] twl4030_usb twl4030_usb: Initialized TWL4030 USB module


[ 0.141510] print_constraints: vdd_mpu_iva: 600 <--> 1450 mV normal


[ 0.142364] print_constraints: vdd_core: 600 <--> 1450 mV normal


[ 0.143371] print_constraints: VMMC1: 1850 <--> 3150 mV at 3150 mV normal standby


[ 0.144317] print_constraints: VDAC: 1800 mV normal standby


[ 0.145233] print_constraints: VAUX2: 1800 mV normal standby


[ 0.146179] print_constraints: VPLL2: 1800 mV normal standby


[ 0.147155] print_constraints: VMMC2: 1850 <--> 3150 mV at 3150 mV normal standby


[ 0.148101] print_constraints: VSIM: 2800 mV normal standby


[ 0.149078] print_constraints: VAUX1: 3000 mV normal standby


[ 0.149963] print_constraints: VAUX4: 2800 mV normal standby


[ 0.150634] omap_i2c omap_i2c.3: bus 3 rev1.3.12 at 100 kHz


[ 0.154113] Advanced Linux Sound Architecture Driver Version 1.0.24.


[ 0.155212] Switching to clocksource 32k_counter


[ 0.187103] musb-hdrc: version 6.0, ?dma?, otg (peripheral+host)


[ 0.192504] musb-hdrc: ConfigData=0xde (UTMI-8, dyn FIFOs, bulk combine, bulk split, HB-ISO Rx, HB-ISO Tx, SoftConn)


[ 0.192535] musb-hdrc: MHDRC RTL version 1.400


[ 0.192535] musb-hdrc: setup fifo_mode 4


[ 0.192565] musb-hdrc: 28/31 max ep, 16384/16384 memory


[ 0.193267] musb-hdrc musb-hdrc: USB OTG mode controller at fa0ab000 using DMA, IRQ 92


[ 0.194213] NET: Registered protocol family 2


[ 0.194519] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)


[ 0.194946] TCP established hash table entries: 16384 (order: 5, 131072 bytes)


[ 0.195495] TCP bind hash table entries: 16384 (order: 4, 65536 bytes)


[ 0.195831] TCP: Hash tables configured (established 16384 bind 16384)


[ 0.195861] TCP reno registered


[ 0.195861] UDP hash table entries: 256 (order: 0, 4096 bytes)


[ 0.195922] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)


[ 0.196289] NET: Registered protocol family 1


[ 0.196594] NetWinder Floating Point Emulator V0.97 (double precision)


[ 0.199035] omap_dsp_init: 600000 bytes @ 9f200000


[ 0.239471] VFS: Disk quotas dquot_6.5.2


[ 0.240020] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)


[ 0.243469] msgmni has been set to 977


[ 0.246063] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)


[ 0.246093] io scheduler noop registered


[ 0.246124] io scheduler deadline registered


[ 0.246185] io scheduler cfq registered (default)


[ 0.261016] OMAP DSS rev 2.0


[ 0.264526] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled


[ 0.267456] omap_uart.0: ttyO0 at MMIO 0x4806a000 (irq = 72) is a OMAP UART0


[ 0.268035] omap_uart.1: ttyO1 at MMIO 0x4806c000 (irq = 73) is a OMAP UART1


[ 0.268585] omap_uart.2: ttyO2 at MMIO 0x49020000 (irq = 74) is a OMAP UART2


[ 0.285217] brd: module loaded


[ 0.293853] loop: module loaded


[ 0.293914] OMAP overclocker loaded.


[ 0.297027] omap2-nand driver initializing


[ 0.297210] NAND device: Manufacturer ID: 0x2c, Chip ID: 0xbc (Micron NAND 512MiB 1,8V 16-bit)


[ 0.297821] Creating 5 MTD partitions on "omap2-nand.0":


[ 0.297851] 0x000000000000-0x000000080000 : "xloader"


[ 0.298889] 0x000000080000-0x000000260000 : "uboot"


[ 0.300079] 0x000000260000-0x000000280000 : "uboot-env"


[ 0.300903] 0x000000280000-0x000000c80000 : "boot"


[ 0.303558] 0x000000c80000-0x000020000000 : "rootfs"


[ 0.396087] UBI: attaching mtd4 to ubi0


[ 0.396118] UBI: physical eraseblock size: 131072 bytes (128 KiB)


[ 0.396148] UBI: logical eraseblock size: 129024 bytes


[ 0.396148] UBI: smallest flash I/O unit: 2048


[ 0.396179] UBI: sub-page size: 512


[ 0.396179] UBI: VID header offset: 512 (aligned 512)


[ 0.396209] UBI: data offset: 2048


[ 1.494720] UBI: max. sequence number: 3049


[ 1.511077] UBI: attached mtd4 to ubi0


[ 1.511108] UBI: MTD device name: "rootfs"


[ 1.511138] UBI: MTD device size: 499 MiB


[ 1.511138] UBI: number of good PEBs: 3996


[ 1.511169] UBI: number of bad PEBs: 0


[ 1.511169] UBI: number of corrupted PEBs: 0


[ 1.511169] UBI: max. allowed volumes: 128


[ 1.511199] UBI: wear-leveling threshold: 4096


[ 1.511199] UBI: number of internal volumes: 1


[ 1.511230] UBI: number of user volumes: 1


[ 1.511230] UBI: available PEBs: 0


[ 1.511260] UBI: total number of reserved PEBs: 3996


[ 1.511260] UBI: number of PEBs reserved for bad PEB handling: 39


[ 1.511291] UBI: max/mean erase counter: 66/16


[ 1.511291] UBI: image sequence number: 2021296816


[ 1.511352] UBI: attaching mtd3 to ubi1


[ 1.511352] UBI: physical eraseblock size: 131072 bytes (128 KiB)


[ 1.511383] UBI: logical eraseblock size: 129024 bytes


[ 1.511383] UBI: smallest flash I/O unit: 2048


[ 1.511413] UBI: sub-page size: 512


[ 1.511413] UBI: VID header offset: 512 (aligned 512)


[ 1.511444] UBI: data offset: 2048


[ 1.511718] UBI: background thread "ubi_bgt0d" started, PID 553


[ 1.533782] UBI: max. sequence number: 2838


[ 1.542510] UBI: attached mtd3 to ubi1


[ 1.542510] UBI: MTD device name: "boot"


[ 1.542541] UBI: MTD device size: 10 MiB


[ 1.542541] UBI: number of good PEBs: 80


[ 1.542572] UBI: number of bad PEBs: 0


[ 1.542572] UBI: number of corrupted PEBs: 0


[ 1.542602] UBI: max. allowed volumes: 128


[ 1.542602] UBI: wear-leveling threshold: 4096


[ 1.542633] UBI: number of internal volumes: 1


[ 1.542633] UBI: number of user volumes: 1


[ 1.542633] UBI: available PEBs: 0


[ 1.542663] UBI: total number of reserved PEBs: 80


[ 1.542663] UBI: number of PEBs reserved for bad PEB handling: 2


[ 1.542694] UBI: max/mean erase counter: 47/34


[ 1.542694] UBI: image sequence number: 121715841


[ 1.542968] UBI: background thread "ubi_bgt1d" started, PID 556


[ 1.543090] usbcore: registered new interface driver libusual


[ 1.543975] mousedev: PS/2 mouse device common for all mice


[ 1.544708] input: keypad as /devices/platform/omap_i2c.1/i2c-1/1-004a/twl4030_keypad/input/input0


[ 1.548126] input: power-button as /devices/platform/omap_i2c.1/i2c-1/1-0049/twl4030_pwrbutton/input/input1


[ 1.549591] input: nub0 as /devices/platform/omap_i2c.3/i2c-3/3-0066/input/input2


[ 1.551269] input: nub1 as /devices/platform/omap_i2c.3/i2c-3/3-0067/input/input3


[ 1.556304] twl_rtc twl_rtc: rtc core: registered twl_rtc as rtc0


[ 1.557159] i2c /dev entries driver


[ 1.562255] bq27x00-battery 3-0055: support ver. 1.2.0 enabled


[ 1.586608] OMAP Watchdog Timer Rev 0x31: initial timeout 60 sec


[ 1.587158] twl4030_wdt twl4030_wdt: Failed to register misc device


[ 1.587219] twl4030_wdt: probe of twl4030_wdt failed with error -16


[ 1.587860] voltdm_scale: No voltage scale API registered for vdd_mpu_iva


[ 1.587890] platform mpu.0: omap_target: unable to scale voltage up.


[ 1.588348] cpuidle: using governor ladder


[ 1.588348] cpuidle: using governor menu


[ 1.815887] Registered led device: pandora::sd1


[ 1.816223] Registered led device: pandora::sd2


[ 1.816558] Registered led device: pandora::bluetooth


[ 1.816833] Registered led device: pandora::wifi


[ 1.818145] Registered led device: pandora::keypad_bl


[ 1.819244] Registered led device: pandora::power


[ 1.821655] Registered led device: pandora::charger


[ 1.823028] usbcore: registered new interface driver usbhid


[ 1.823028] usbhid: USB HID core driver


[ 1.825622] OMAP3 Pandora SoC init


[ 1.896820] asoc: twl4030-hifi <-> omap-mcbsp-dai.1 mapping ok


[ 1.898345] asoc: twl4030-hifi <-> omap-mcbsp-dai.3 mapping ok


[ 1.901245] ALSA device list:


[ 1.901275] #0: omap3pandora


[ 1.901458] TCP cubic registered


[ 1.901489] NET: Registered protocol family 17


[ 1.901550] NET: Registered protocol family 15


[ 1.901550] Registering the dns_resolver key type


[ 1.901641] VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 1


[ 1.901672] ThumbEE CPU extension supported.


[ 1.901702] Registering SWP/SWPB emulation handler


[ 1.908935] clock: disabling unused clocks to save power


[ 1.940826] Console: switching to colour frame buffer device 100x30


[ 2.126861] regulator_init_complete: VAUX4: incomplete constraints, leaving on


[ 2.129913] input: gpio-keys as /devices/platform/gpio-keys/input/input4


[ 2.131683] twl_rtc twl_rtc: setting system clock to 2012-07-18 10:32:18 UTC (1342607538)


[ 2.145660] mmc0: host does not support reading read-only switch. assuming write-enable.


[ 2.149414] mmc0: new high speed SDHC card at address e624


[ 2.150451] mmcblk0: mmc0:e624 SU32G 29.7 GiB


[ 2.155883] mmcblk0: p1


[ 2.229064] UBIFS: mounted UBI device 0, volume 0, name "rootfs"


[ 2.229095] UBIFS: file system size: 508612608 bytes (496692 KiB, 485 MiB, 3942 LEBs)


[ 2.229095] UBIFS: journal size: 9033728 bytes (8822 KiB, 8 MiB, 71 LEBs)


[ 2.229125] UBIFS: media format: w4/r0 (latest is w4/r0)


[ 2.229125] UBIFS: default compressor: lzo


[ 2.229156] UBIFS: reserved for root: 0 bytes (0 KiB)


[ 2.230072] VFS: Mounted root (ubifs filesystem) on device 0:13.


[ 2.230682] devtmpfs: mounted


[ 2.231231] Freeing init memory: 192K


[ 2.437286] mmc1: host does not support reading read-only switch. assuming write-enable.


[ 2.441925] mmc1: new high speed SDHC card at address e624


[ 2.445495] mmcblk1: mmc1:e624 SD32G 29.7 GiB


[ 2.459625] mmcblk1: p1


[ 2.561401] mmc2: card claims to support voltages below the defined range. These will be ignored.


[ 2.562713] mmc2: new SDIO card at address 0001


[ 3.285858] udev: starting version 151


[ 3.286560] udevd (709): /proc/709/oom_adj is deprecated, please use /proc/709/oom_score_adj instead.


[ 5.679901] alignment: ignoring faults is unsafe on this CPU. Defaulting to fixup mode.


[ 9.424194] ads7846 spi1.0: touchscreen, irq 254


[ 9.425231] input: touchscreen as /devices/platform/omap2_mcspi.1/spi_master/spi1/spi1.0/input/input5


[ 10.541015] fuse init (API version 7.17)


[ 11.782592] NET: Registered protocol family 10


[ 12.821685] FAT-fs (mmcblk0): bogus number of reserved sectors


[ 12.821716] FAT-fs (mmcblk0): Can't find a valid FAT filesystem


[ 12.922088] FAT-fs (mmcblk1): bogus number of reserved sectors


[ 12.922119] FAT-fs (mmcblk1): Can't find a valid FAT filesystem


[ 13.120941] zram: module is from the staging directory, the quality is unknown, you have been warned.


[ 13.139739] zram: num_devices not specified. Using default: 1


[ 13.139770] zram: Creating 1 devices ...


[ 13.809570] UBIFS: mounted UBI device 1, volume 0, name "boot"


[ 13.809600] UBIFS: file system size: 8386560 bytes (8190 KiB, 7 MiB, 65 LEBs)


[ 13.809600] UBIFS: journal size: 1032193 bytes (1008 KiB, 0 MiB, 6 LEBs)


[ 13.809631] UBIFS: media format: w4/r0 (latest is w4/r0)


[ 13.809661] UBIFS: default compressor: lzo


[ 13.809661] UBIFS: reserved for root: 396117 bytes (386 KiB)


[ 14.281097] FAT-fs (mmcblk0): bogus number of reserved sectors


[ 14.281127] FAT-fs (mmcblk0): Can't find a valid FAT filesystem


[ 14.380249] FAT-fs (mmcblk1): bogus number of reserved sectors


[ 14.380279] FAT-fs (mmcblk1): Can't find a valid FAT filesystem


[ 14.956176] zram: disk size not provided. You can use disksize_kb module param to specify size.


[ 14.956176] Using default: (25% of RAM).


[ 14.958282] FAT-fs (zram0): bogus number of reserved sectors


[ 14.958312] FAT-fs (zram0): Can't find a valid FAT filesystem


[ 15.672149] FAT-fs (zram0): bogus number of reserved sectors


[ 15.672180] FAT-fs (zram0): Can't find a valid FAT filesystem


[ 15.686706] platform mpu.0: max OPP set to 3


[ 15.755462] input: nub0 as /devices/platform/omap_i2c.3/i2c-3/3-0066/input/input6


[ 15.846282] input: nub1 as /devices/platform/omap_i2c.3/i2c-3/3-0067/input/input7


[ 15.982238] Adding 125164k swap on /dev/zram0. Priority:5 extents:1 across:125164k SS


[ 20.681488] SGX clock rate 110 MHz


[ 21.654937] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver


[ 22.702209] ehci-omap ehci-omap.0: OMAP-EHCI Host Controller


[ 22.702423] ehci-omap ehci-omap.0: new USB bus registered, assigned bus number 1


[ 22.702606] ehci-omap ehci-omap.0: irq 77, io mem 0x48064800


[ 22.717895] ehci-omap ehci-omap.0: USB 2.0 started, EHCI 1.00


[ 22.718048] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002


[ 22.718078] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1


[ 22.718078] usb usb1: Product: OMAP-EHCI Host Controller


[ 22.718109] usb usb1: Manufacturer: Linux 3.2.17 ehci_hcd


[ 22.718109] usb usb1: SerialNumber: ehci-omap.0


[ 22.721679] hub 1-0:1.0: USB hub found


[ 22.721740] hub 1-0:1.0: 3 ports detected


[ 23.534210] gadget: using random self ethernet address


[ 23.534240] gadget: using random host ethernet address


[ 23.539215] usb0: MAC c6:5d:e6:6c:31:40


[ 23.539215] usb0: HOST MAC 32:ab:88:e3:97:88


[ 23.550933] gadget: CDC Composite Gadget, version: King Kamehameha Day 2008


[ 23.550994] gadget: g_cdc ready


[ 23.566558] musb-hdrc musb-hdrc: MUSB HDRC host driver


[ 23.566650] musb-hdrc musb-hdrc: new USB bus registered, assigned bus number 2


[ 23.566802] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002


[ 23.566833] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1


[ 23.566833] usb usb2: Product: MUSB HDRC host driver


[ 23.566864] usb usb2: Manufacturer: Linux 3.2.17 musb-hcd


[ 23.566864] usb usb2: SerialNumber: musb-hdrc


[ 23.570068] hub 2-0:1.0: USB hub found


[ 23.570129] hub 2-0:1.0: 1 port detected


[ 38.557586] Bluetooth: Core ver 2.16


[ 38.559417] NET: Registered protocol family 31


[ 38.559448] Bluetooth: HCI device and connection manager initialized


[ 38.559478] Bluetooth: HCI socket layer initialized


[ 38.559478] Bluetooth: L2CAP socket layer initialized


[ 38.582031] Bluetooth: SCO socket layer initialized


[ 45.366119] UBI: scrubbed PEB 2938 (LEB 0:2785), data moved to PEB 378


[ 786.965911] keyboard: can't emulate rawmode for keycode 139


[ 787.093322] keyboard: can't emulate rawmode for keycode 139


[ 799.052917] squashfs: version 4.0 (2009/01/31) Phillip Lougher


[ 799.289978] aufs 3.2-20120109


[ 799.342376] aufs test_add:261:mount[2212]: uid/gid/perm /mnt/pnd/picodrive.notaz.1.80 1000/1000/0755, 0/0/0777


[ 864.856079] keyboard: can't emulate rawmode for keycode 139


[ 865.050476] keyboard: can't emulate rawmode for keycode 139


[ 877.800140] aufs test_add:261:mount[2447]: uid/gid/perm /mnt/pnd/snes9x.skeezix.alpha 1000/100/0755, 0/0/0777


[ 950.401000] keyboard: can't emulate rawmode for keycode 139


[ 950.618041] keyboard: can't emulate rawmode for keycode 139


[ 965.953857] aufs test_add:261:mount[2682]: uid/gid/perm /mnt/pnd/nesemu 1000/100/0777, 0/0/0777


[ 1012.548522] musb-hdrc musb-hdrc: remove, state 4


[ 1012.548614] usb usb2: USB disconnect, device number 1


[ 1012.560760] musb-hdrc musb-hdrc: USB bus 2 deregistered


[ 1012.603149] ehci-omap ehci-omap.0: remove, state 4


[ 1012.603210] usb usb1: USB disconnect, device number 1


[ 1012.637512] ehci-omap ehci-omap.0: USB bus 1 deregistered


[ 1013.784973] PM: Syncing filesystems ... done.


[ 1013.812683] Freezing user space processes ... (elapsed 0.02 seconds) done.


[ 1013.835479] Freezing remaining freezable tasks ... (elapsed 0.02 seconds) done.


[ 1013.859313] Suspending console(s) (use no_console_suspend to debug)


[ 1014.048034] PM: suspend of devices complete after 188.172 msecs


[ 1014.048614] PM: late suspend of devices complete after 0.579 msecs


[ 1746.052551] Successfully put all powerdomains to target state


[ 1746.053314] PM: early resume of devices complete after 0.579 msecs


[ 1746.912902] PM: resume of devices complete after 859.375 msecs


[ 1746.913574] Restarting tasks ... done.


[ 1747.216430] g_cdc: Unknown parameter `ehci_hcd'


[ 1750.914276] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver


[ 1751.932647] ehci-omap ehci-omap.0: OMAP-EHCI Host Controller


[ 1751.932861] ehci-omap ehci-omap.0: new USB bus registered, assigned bus number 1


[ 1751.933044] ehci-omap ehci-omap.0: irq 77, io mem 0x48064800


[ 1751.948455] ehci-omap ehci-omap.0: USB 2.0 started, EHCI 1.00


[ 1751.948608] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002


[ 1751.948638] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1


[ 1751.948669] usb usb1: Product: OMAP-EHCI Host Controller


[ 1751.948669] usb usb1: Manufacturer: Linux 3.2.17 ehci_hcd


[ 1751.948699] usb usb1: SerialNumber: ehci-omap.0


[ 1751.951934] hub 1-0:1.0: USB hub found


[ 1751.951995] hub 1-0:1.0: 3 ports detected


[ 1761.604888] usb 1-2: new high-speed USB device number 2 using ehci-omap


[ 1761.764099] usb 1-2: New USB device found, idVendor=05e3, idProduct=0608


[ 1761.764129] usb 1-2: New USB device strings: Mfr=0, Product=1, SerialNumber=0


[ 1761.764129] usb 1-2: Product: USB2.0 Hub


[ 1761.767486] hub 1-2:1.0: USB hub found


[ 1761.767852] hub 1-2:1.0: 4 ports detected


[ 1762.058563] usb 1-2.1: new high-speed USB device number 3 using ehci-omap


[ 1762.178100] usb 1-2.1: New USB device found, idVendor=05e3, idProduct=0608


[ 1762.178131] usb 1-2.1: New USB device strings: Mfr=0, Product=1, SerialNumber=0


[ 1762.178131] usb 1-2.1: Product: USB2.0 Hub


[ 1762.181396] hub 1-2.1:1.0: USB hub found


[ 1762.181732] hub 1-2.1:1.0: 4 ports detected


[ 1762.472625] usb 1-2.1.4: new low-speed USB device number 4 using ehci-omap


[ 1762.595581] usb 1-2.1.4: New USB device found, idVendor=099a, idProduct=7202


[ 1762.595611] usb 1-2.1.4: New USB device strings: Mfr=0, Product=2, SerialNumber=0


[ 1762.595611] usb 1-2.1.4: Product: Wireless Keyboard/Mouse


[ 1762.605834] input: Wireless Keyboard/Mouse as /devices/platform/usbhs-omap.0/ehci-omap.0/usb1/1-2/1-2.1/1-2.1.4/1-2.1.4:1.0/input/input8


[ 1762.606536] generic-usb 0003:099A:7202.0001: input: USB HID v1.11 Keyboard [Wireless Keyboard/Mouse] on usb-ehci-omap.0-2.1.4/input0


[ 1762.623779] input: Wireless Keyboard/Mouse as /devices/platform/usbhs-omap.0/ehci-omap.0/usb1/1-2/1-2.1/1-2.1.4/1-2.1.4:1.1/input/input9


[ 1762.624877] generic-usb 0003:099A:7202.0002: input: USB HID v1.11 Mouse [Wireless Keyboard/Mouse] on usb-ehci-omap.0-2.1.4/input1


[ 1791.761840] usb 1-2.3: new full-speed USB device number 5 using ehci-omap


[ 1791.883941] usb 1-2.3: New USB device found, idVendor=046d, idProduct=c22f


[ 1791.883972] usb 1-2.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0


[ 1791.883972] usb 1-2.3: Product: Logitech Cordless RumblePad 2


[ 1791.884002] usb 1-2.3: Manufacturer: Logitech


[ 1791.891662] generic-usb 0003:046D:C22F.0003: claimed by neither input, hiddev nor hidraw


[ 1791.901092] generic-usb 0003:046D:C22F.0004: claimed by neither input, hiddev nor hidraw


[ 1792.800781] usb 1-2.3: USB disconnect, device number 5


[ 1793.081542] usb 1-2.3: new full-speed USB device number 6 using ehci-omap


[ 1793.201660] usb 1-2.3: New USB device found, idVendor=046d, idProduct=c219


[ 1793.201660] usb 1-2.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0


[ 1793.201690] usb 1-2.3: Product: Logitech Cordless RumblePad 2


[ 1793.201721] usb 1-2.3: Manufacturer: Logitech


[ 1804.537384] aufs test_add:261:mount[3058]: uid/gid/perm /mnt/pnd/qjoypad 1000/1000/0775, 0/0/0777


[ 1804.967681] UBI: scrubbed PEB 3404 (LEB 0:1922), data moved to PEB 378


[ 1805.045440] UBI: scrubbed PEB 2278 (LEB 0:1815), data moved to PEB 3404


[ 1805.243255] UBI: scrubbed PEB 2461 (LEB 0:1816), data moved to PEB 2278


[ 1805.507659] UBI: scrubbed PEB 3410 (LEB 0:1925), data moved to PEB 2461


[ 1917.711029] aufs test_add:261:mount[3339]: uid/gid/perm /mnt/pnd/picodrive.notaz.1.80 1000/1000/0755, 0/0/0777


[ 1953.565521] usb 1-2.3: USB disconnect, device number 6


[ 2075.987792] aufs test_add:261:mount[3586]: uid/gid/perm /mnt/pnd/op_wifi 1000/1000/0755, 0/0/0777


[ 2077.548461] cfg80211: Calling CRDA to update world regulatory domain


[ 2078.192382] wl1251: using dedicated interrupt line


[ 2078.284881] ieee80211 phy0: Selected rate control algorithm 'pid'


[ 2078.293426] wl1251: loaded


[ 2078.294036] wl1251: initialized


[ 2080.995361] wl1251: 154 tx blocks at 0x3b788, 35 rx blocks at 0x3a780


[ 2081.011383] wl1251: firmware booted (Rev 6.0.4.235)


[ 2081.153167] ADDRCONF(NETDEV_UP): wlan0: link is not ready


[ 2108.224243] wlan0: deauthenticating from 00:0b:86:e9:89:c2 by local choice (reason=3)


[ 2108.300079] wlan0: authenticate with 00:0b:86:e9:89:c2 (try 1)


[ 2108.306304] wlan0: authenticated


[ 2108.393798] wlan0: associate with 00:0b:86:e9:89:c2 (try 1)


[ 2108.410980] wlan0: RX AssocResp from 00:0b:86:e9:89:c2 (capab=0x421 status=0 aid=1)


[ 2108.411010] wlan0: associated


[ 2108.535430] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready


[ 2111.270538] ISO 9660 Extensions: RRIP_1991A


[ 2111.426422] aufs test_add:261:mount[4001]: uid/gid/perm /mnt/pnd/hdonk_firefox_001 500/501/0755, 0/0/0777


[ 2118.651458] wlan0: no IPv6 routers present


[ 2118.747070] wlan0: deauthenticating from 00:0b:86:e9:89:c2 by local choice (reason=3)


[ 2118.932159] wlan0: authenticate with 00:0b:86:e5:e1:c2 (try 1)


[ 2118.935119] wlan0: deauthenticating from 00:0b:86:e5:e1:c2 by local choice (reason=3)


[ 2119.003204] wlan0: authenticate with 00:0b:86:e6:6c:c2 (try 1)


[ 2119.005889] wlan0: authenticated


[ 2119.081390] wlan0: associate with 00:0b:86:e6:6c:c2 (try 1)


[ 2119.092193] wlan0: RX AssocResp from 00:0b:86:e6:6c:c2 (capab=0x421 status=0 aid=1)


[ 2119.092224] wlan0: associated


[ 2158.730651] wlan0: deauthenticating from 00:0b:86:e6:6c:c2 by local choice (reason=3)


[ 2158.761962] cfg80211: Calling CRDA to update world regulatory domain


[ 2158.936614] wlan0: authenticate with 00:0b:86:e9:89:c2 (try 1)


[ 2158.939239] wlan0: deauthenticating from 00:0b:86:e9:89:c2 by local choice (reason=3)


[ 2159.061248] wlan0: deauthenticating from 00:0b:86:e5:e1:c2 by local choice (reason=3)


[ 2159.151672] wlan0: authenticate with 00:0b:86:e6:6c:c2 (try 1)


[ 2159.156646] wlan0: authenticated


[ 2159.269226] wlan0: associate with 00:0b:86:e6:6c:c2 (try 1)


[ 2159.286651] wlan0: RX AssocResp from 00:0b:86:e6:6c:c2 (capab=0x421 status=0 aid=1)


[ 2159.286682] wlan0: associated


[ 2205.559936] aufs test_add:261:mount[4312]: uid/gid/perm /mnt/pnd/kblayout 1000/1000/0777, 0/0/0777


[ 2218.652557] wlan0: deauthenticating from 00:0b:86:e6:6c:c2 by local choice (reason=3)


[ 2218.843719] wlan0: authenticate with 00:0b:86:e9:89:c2 (try 1)


[ 2218.846160] wlan0: deauthenticating from 00:0b:86:e9:89:c2 by local choice (reason=3)


[ 2218.958862] wlan0: deauthenticating from 00:0b:86:e9:a0:22 by local choice (reason=3)


[ 2219.090179] wlan0: authenticate with 00:0b:86:e6:60:02 (try 1)


[ 2219.090362] wlan0: deauthenticating from 00:0b:86:e6:60:02 by local choice (reason=3)


[ 2219.151672] wlan0: authenticate with 00:0b:86:e6:6c:c2 (try 1)


[ 2219.154876] wlan0: authenticated


[ 2219.261230] wlan0: associate with 00:0b:86:e6:6c:c2 (try 1)


[ 2219.278808] wlan0: RX AssocResp from 00:0b:86:e6:6c:c2 (capab=0x421 status=0 aid=1)


[ 2219.278839] wlan0: associated


[ 2231.109527] aufs test_add:261:mount[4516]: uid/gid/perm /mnt/pnd/pndmanager 1000/100/0755, 0/0/0777


[ 2298.675598] wlan0: deauthenticating from 00:0b:86:e6:6c:c2 by local choice (reason=3)


[ 2298.677001] cfg80211: Calling CRDA to update world regulatory domain


[ 2309.467315] wlan0: deauthenticating from 00:0b:86:e5:e1:c2 by local choice (reason=3)


[ 2309.550598] wlan0: authenticate with 00:0b:86:e6:60:02 (try 1)


[ 2309.553680] wlan0: authenticated


[ 2309.628234] wlan0: associate with 00:0b:86:e6:60:02 (try 1)


[ 2309.639495] wlan0: RX AssocResp from 00:0b:86:e6:60:02 (capab=0x421 status=0 aid=1)


[ 2309.639526] wlan0: associated


[ 2471.962554] keyboard: can't emulate rawmode for keycode 139


[ 2472.086517] keyboard: can't emulate rawmode for keycode 139


[ 2482.707183] ISO 9660 Extensions: RRIP_1991A


[ 2482.991149] aufs test_add:261:mount[4758]: uid/gid/perm /mnt/pnd/hdonk_firefox_001 500/501/0755, 0/0/0777


[ 2758.722839] wlan0: deauthenticating from 00:0b:86:e6:60:02 by local choice (reason=3)


[ 2758.754577] cfg80211: Calling CRDA to update world regulatory domain


[ 2758.935180] wlan0: authenticate with 00:0b:86:e9:a0:22 (try 1)


[ 2758.938354] wlan0: deauthenticating from 00:0b:86:e9:a0:22 by local choice (reason=3)


[ 2759.044830] wlan0: deauthenticating from 00:0b:86:e6:60:02 by local choice (reason=3)


[ 2759.159454] wlan0: authenticate with 00:0b:86:e6:6c:c2 (try 1)


[ 2759.164093] wlan0: authenticated


[ 2759.269226] wlan0: associate with 00:0b:86:e6:6c:c2 (try 1)


[ 2759.290466] wlan0: RX AssocResp from 00:0b:86:e6:6c:c2 (capab=0x421 status=0 aid=1)


[ 2759.290496] wlan0: associated


[ 2836.214813] usb 1-2.3: new low-speed USB device number 7 using ehci-omap


[ 2836.348327] usb 1-2.3: New USB device found, idVendor=045e, idProduct=071f


[ 2836.348358] usb 1-2.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0


[ 2836.348388] usb 1-2.3: Product: Microsoft�� 2.4GHz Transceiver V2.0


[ 2836.348419] usb 1-2.3: Manufacturer: Microsoft


[ 2836.385864] input: Microsoft Microsoft�� 2.4GHz Transceiver V2.0 as /devices/platform/usbhs-omap.0/ehci-omap.0/usb1/1-2/1-2.3/1-2.3:1.0/input/input10


[ 2836.386901] generic-usb 0003:045E:071F.0006: input: USB HID v1.11 Mouse [Microsoft Microsoft�� 2.4GHz Transceiver V2.0] on usb-ehci-omap.0-2.3/input0


[ 2998.582427] wlan0: deauthenticating from 00:0b:86:e6:6c:c2 by local choice (reason=3)


[ 2998.598388] cfg80211: Calling CRDA to update world regulatory domain


[ 3009.441131] wlan0: authenticate with 00:0b:86:e6:60:02 (try 1)


[ 3009.444122] wlan0: authenticated


[ 3009.518859] wlan0: associate with 00:0b:86:e6:60:02 (try 1)


[ 3009.532806] wlan0: RX AssocResp from 00:0b:86:e6:60:02 (capab=0x421 status=0 aid=1)


[ 3009.532806] wlan0: associated


[ 3638.553894] aufs test_add:261:mount[5035]: uid/gid/perm /mnt/pnd/pndmanager 1000/100/0755, 0/0/0777


[ 3838.667907] wlan0: deauthenticating from 00:0b:86:e6:60:02 by local choice (reason=3)


[ 3838.824188] wlan0: authenticate with 00:0b:86:e9:a0:22 (try 1)


[ 3838.827178] wlan0: deauthenticating from 00:0b:86:e9:a0:22 by local choice (reason=3)


[ 3838.944061] wlan0: deauthenticating from 00:0b:86:e6:60:02 by local choice (reason=3)


[ 3839.026672] wlan0: authenticate with 00:0b:86:e5:e1:c2 (try 1)


[ 3839.030609] wlan0: authenticated


[ 3839.136077] wlan0: associate with 00:0b:86:e5:e1:c2 (try 1)


[ 3839.155548] wlan0: RX AssocResp from 00:0b:86:e5:e1:c2 (capab=0x421 status=0 aid=1)


[ 3839.155578] wlan0: associated


[ 4336.590026] usb 1-2.1.2: new full-speed USB device number 8 using ehci-omap


[ 4336.711242] usb 1-2.1.2: New USB device found, idVendor=046d, idProduct=c22f


[ 4336.711273] usb 1-2.1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0


[ 4336.711303] usb 1-2.1.2: Product: Logitech Cordless RumblePad 2


[ 4336.711303] usb 1-2.1.2: Manufacturer: Logitech


[ 4336.718994] generic-usb 0003:046D:C22F.0007: claimed by neither input, hiddev nor hidraw


[ 4336.728820] generic-usb 0003:046D:C22F.0008: claimed by neither input, hiddev nor hidraw


[ 4339.932922] usb 1-2.1.2: USB disconnect, device number 8


[ 4340.230682] usb 1-2.1.2: new full-speed USB device number 9 using ehci-omap


[ 4340.352020] usb 1-2.1.2: New USB device found, idVendor=046d, idProduct=c219


[ 4340.352050] usb 1-2.1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0


[ 4340.352050] usb 1-2.1.2: Product: Logitech Cordless RumblePad 2


[ 4340.352081] usb 1-2.1.2: Manufacturer: Logitech


...and this is the error message I get with qjoypad:

No joystick devices are currently available to configure.


Please plug in a gaming device and select "Update Joystick Devices" from the popup menu.


No matter what I try, I can't get it to recognize the controller. I am plugged in through a 7-Port high-speed USB hub.
 
Last edited by a moderator:
carport888 said:
[ 4336.711303] usb 1-2.1.2: Product: Logitech Cordless RumblePad 2


[ 4336.711303] usb 1-2.1.2: Manufacturer: Logitech


[ 4336.718994] generic-usb 0003:046D:C22F.0007: claimed by neither input, hiddev nor hidraw


[ 4336.728820] generic-usb 0003:046D:C22F.0008: claimed by neither input, hiddev nor hidraw
Click to expand...
Hmh, no driver is interested in your controller, does it work on recent Linux PC distro?


Could you run "lsmod" after booting the old kernel?
 
Here is "lsmod":

dan-openpandora:~$ lsmod


Module Size Used by


board_omap3pandora_wifi 1920 0


wl1251_sdio 5380 0


wl1251 57984 1 wl1251_sdio


lib80211_crypt_ccmp 5760 0


lib80211_crypt_wep 3840 0


lib80211_crypt_tkip 9280 0


lib80211 6656 3 lib80211_crypt_ccmp,lib80211_crypt_wep,lib80211_crypt_tkip


arc4 1792 2


pcbc 3712 0


ecb 2880 2


compat_firmware_class 9032 1 wl1251


mac80211 179372 1 wl1251


cfg80211 147476 2 wl1251,mac80211


compat 7168 2 mac80211,cfg80211


rfkill_backport 20084 1 cfg80211


g_cdc 27988 0


bufferclass_ti 6036 0


omaplfb 9408 0


pvrsrvkm 128296 2 bufferclass_ti,omaplfb


snd_seq 50656 0


snd_seq_device 7500 1 snd_seq


ipv6 239592 10


fuse 49244 2


ads7846 9792 0


hwmon 2516 1 ads7846


dan-openpandora:~$


Not sure if it would help, but I also ran another dmesg while in the old kernel...

dan-openpandora:~$ dmesg


device: pandora::wifi


[ 9.141143] Registered led device: pandora::keypad_bl


[ 9.141326] Registered led device: pandora::power


[ 9.141662] Registered led device: pandora::charger


[ 9.141906] usbcore: registered new interface driver usbhid


[ 9.141937] usbhid: v2.6:USB HID core driver


[ 9.142120] Advanced Linux Sound Architecture Driver Version 1.0.17.


[ 9.142364] ASoC version 0.13.2


[ 9.142486] OMAP3 Pandora SoC init


[ 9.142669] TWL4030 Audio Codec init


[ 9.144195] asoc: twl4030 <-> omap-mcbsp-dai-0 mapping ok


[ 9.145690] asoc: twl4030 <-> omap-mcbsp-dai-1 mapping ok


[ 9.153076] ALSA device list:


[ 9.153076] #0: omap3pandora (twl4030)


[ 9.153350] TCP cubic registered


[ 9.153381] NET: Registered protocol family 17


[ 9.153411] NET: Registered protocol family 15


[ 9.153472] Bluetooth: L2CAP ver 2.11


[ 9.153472] Bluetooth: L2CAP socket layer initialized


[ 9.153503] Bluetooth: SCO (Voice Link) ver 0.6


[ 9.153503] Bluetooth: SCO socket layer initialized


[ 9.153686] Bluetooth: RFCOMM socket layer initialized


[ 9.153747] Bluetooth: RFCOMM TTY layer initialized


[ 9.153778] Bluetooth: RFCOMM ver 1.10


[ 9.153778] Bluetooth: BNEP (Ethernet Emulation) ver 1.3


[ 9.153808] Bluetooth: HIDP (Human Interface Emulation) ver 1.2


[ 9.153808] ThumbEE CPU extension supported.


[ 9.153839] Disabling unused clock "sr2_fck"


[ 9.153839] Disabling unused clock "sr1_fck"


[ 9.153869] Disabling unused clock "mcbsp_fck"


[ 9.153869] Disabling unused clock "mcbsp_fck"


[ 9.153900] Disabling unused clock "mcbsp_fck"


[ 9.153900] Disabling unused clock "mcbsp_ick"


[ 9.153930] Disabling unused clock "mcbsp_ick"


[ 9.153930] Disabling unused clock "mcbsp_ick"


[ 9.153961] Disabling unused clock "gpt2_ick"


[ 9.153961] Disabling unused clock "gpt3_ick"


[ 9.153991] Disabling unused clock "gpt4_ick"


[ 9.153991] Disabling unused clock "gpt5_ick"


[ 9.153991] Disabling unused clock "gpt6_ick"


[ 9.154022] Disabling unused clock "gpt7_ick"


[ 9.154022] Disabling unused clock "gpt8_ick"


[ 9.154052] Disabling unused clock "gpt9_ick"


[ 9.154052] Disabling unused clock "wdt3_ick"


[ 9.154083] Disabling unused clock "wdt3_fck"


[ 9.154083] Disabling unused clock "gpio2_dbck"


[ 9.154113] Disabling unused clock "gpio3_dbck"


[ 9.154113] Disabling unused clock "gpio5_dbck"


[ 9.154144] Disabling unused clock "gpt9_fck"


[ 9.154144] Disabling unused clock "gpt8_fck"


[ 9.154144] Disabling unused clock "gpt7_fck"


[ 9.154174] Disabling unused clock "gpt6_fck"


[ 9.154174] Disabling unused clock "gpt5_fck"


[ 9.154205] Disabling unused clock "gpt4_fck"


[ 9.154235] Disabling unused clock "gpt3_fck"


[ 9.154235] Disabling unused clock "gpt2_fck"


[ 9.154266] Disabling unused clock "gpt1_ick"


[ 9.154266] Disabling unused clock "wdt1_ick"


[ 9.154296] Disabling unused clock "wdt2_ick"


[ 9.154296] Disabling unused clock "wdt2_fck"


[ 9.154327] Disabling unused clock "gpio1_dbck"


[ 9.154327] Disabling unused clock "gpt1_fck"


[ 9.154357] Disabling unused clock "cam_ick"


[ 9.154357] Disabling unused clock "cam_mclk"


[ 9.154357] Disabling unused clock "des1_ick"


[ 9.154388] Disabling unused clock "sha11_ick"


[ 9.154388] Disabling unused clock "rng_ick"


[ 9.154418] Disabling unused clock "aes1_ick"


[ 9.154418] Disabling unused clock "ssi_ick"


[ 9.154449] Disabling unused clock "mailboxes_ick"


[ 9.154449] Disabling unused clock "mcbsp_ick"


[ 9.154449] Disabling unused clock "mcbsp_ick"


[ 9.154479] Disabling unused clock "gpt10_ick"


[ 9.154479] Disabling unused clock "gpt11_ick"


[ 9.154541] Disabling unused clock "uart2_ick"


[ 9.154571] Disabling unused clock "i2c_ick"


[ 9.154571] Disabling unused clock "hdq_ick"


[ 9.154602] Disabling unused clock "mspro_ick"


[ 9.154602] Disabling unused clock "des2_ick"


[ 9.154602] Disabling unused clock "sha12_ick"


[ 9.154632] Disabling unused clock "aes2_ick"


[ 9.154632] Disabling unused clock "icr_ick"


[ 9.154663] Disabling unused clock "pka_ick"


[ 9.154663] Disabling unused clock "ssi_ssr_fck"


[ 9.154693] Disabling unused clock "hdq_fck"


[ 9.154693] Disabling unused clock "uart2_fck"


[ 9.154724] Disabling unused clock "mcbsp_fck"


[ 9.154724] Disabling unused clock "mcbsp_fck"


[ 9.154724] Disabling unused clock "i2c_fck"


[ 9.154754] Disabling unused clock "mspro_fck"


[ 9.154754] Disabling unused clock "gpt11_fck"


[ 9.154785] Disabling unused clock "gpt10_fck"


[ 9.154785] Disabling unused clock "iva2_ck"


[ 9.154815] Disabling unused clock "dpll4_m6x2_ck"


[ 9.154815] Disabling unused clock "dpll4_m5x2_ck"


[ 9.154846] Disabling unused clock "dpll3_m3x2_ck"


[ 9.154846] Disabling unused clock "sys_clkout1"


[ 9.154876] VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 1


[ 9.185882] Console: switching to colour frame buffer device 100x30


[ 9.367614] twl4030_rtc twl4030_rtc: setting system clock to 2012-07-18 13:26:24 UTC (1342617984)


[ 9.430786] mmc0: host does not support reading read-only switch. assuming write-enable.


[ 9.430816] mmc0: new high speed SDHC card at address e624


[ 9.431335] mmcblk0: mmc0:e624 SU32G 31166976KiB


[ 9.431610] mmcblk0: p1


[ 9.468566] UBIFS: mounted UBI device 0, volume 0, name "rootfs"


[ 9.468597] UBIFS: file system size: 508612608 bytes (496692 KiB, 485 MiB, 3942 LEBs)


[ 9.468627] UBIFS: journal size: 9033728 bytes (8822 KiB, 8 MiB, 71 LEBs)


[ 9.468627] UBIFS: media format: w4/r0 (latest is w4/r0)


[ 9.468658] UBIFS: default compressor: lzo


[ 9.468658] UBIFS: reserved for root: 0 bytes (0 KiB)


[ 9.470001] VFS: Mounted root (ubifs filesystem).


[ 9.470184] Freeing init memory: 140K


[ 9.784545] mmc1: host does not support reading read-only switch. assuming write-enable.


[ 9.784576] mmc1: new high speed SDHC card at address e624


[ 9.785034] mmcblk1: mmc1:e624 SD32G 31166976KiB


[ 9.785339] mmcblk1: p1


[ 20.110504] ads7846 spi1.0: touchscreen, irq 254


[ 20.110565] ads7846 spi1.0: using vsync trigger


[ 20.111175] input: touchscreen as /devices/platform/omap2_mcspi.1/spi1.0/input/input5


[ 23.366729] FAT: bogus number of reserved sectors


[ 23.366760] VFS: Can't find a valid FAT filesystem on dev mmcblk1.


[ 23.540924] FAT: bogus number of reserved sectors


[ 23.540954] VFS: Can't find a valid FAT filesystem on dev mmcblk0.


[ 23.886199] FAT: bogus number of reserved sectors


[ 23.886230] VFS: Can't find a valid FAT filesystem on dev mmcblk1.


[ 23.936401] FAT: bogus number of reserved sectors


[ 23.936431] VFS: Can't find a valid FAT filesystem on dev mmcblk0.


[ 24.926727] fuse init (API version 7.9)


[ 25.144500] NET: Registered protocol family 10


[ 25.769195] UBIFS: mounted UBI device 1, volume 0, name "boot"


[ 25.769195] UBIFS: file system size: 8386560 bytes (8190 KiB, 7 MiB, 65 LEBs)


[ 25.769226] UBIFS: journal size: 1032193 bytes (1008 KiB, 0 MiB, 6 LEBs)


[ 25.769256] UBIFS: media format: w4/r0 (latest is w4/r0)


[ 25.769256] UBIFS: default compressor: lzo


[ 25.769287] UBIFS: reserved for root: 396117 bytes (386 KiB)


[ 26.662322] dpll1_ck rate: 600000000


[ 26.662384] arm_fck rate: 600000000


[ 26.662414] PLL_MPU rate: 600000000


[ 26.709808] input: nub0 as /devices/platform/i2c_omap.3/i2c-adapter/i2c-3/3-0066/input/input6


[ 26.951995] input: nub1 as /devices/platform/i2c_omap.3/i2c-adapter/i2c-3/3-0067/input/input7


[ 32.248046] g_cdc gadget: using random self ethernet address


[ 32.248077] g_cdc gadget: using random host ethernet address


[ 32.248870] usb0: MAC 82:8a:13:4a:b0:c6


[ 32.248901] usb0: HOST MAC 92:fa:43:15:98:be


[ 32.249206] g_cdc gadget: CDC Composite Gadget, version: King Kamehameha Day 2008


[ 32.249237] g_cdc gadget: g_cdc ready


[ 32.249237] musb_hdrc musb_hdrc: MUSB HDRC host driver


[ 32.249389] musb_hdrc musb_hdrc: new USB bus registered, assigned bus number 2


[ 32.249816] usb usb2: configuration #1 chosen from 1 choice


[ 32.249969] hub 2-0:1.0: USB hub found


[ 32.250000] hub 2-0:1.0: 1 port detected


[ 32.358489] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002


[ 32.358520] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1


[ 32.358520] usb usb2: Product: MUSB HDRC host driver


[ 32.358551] usb usb2: Manufacturer: Linux 2.6.27.57-omap1 musb-hcd


[ 32.358551] usb usb2: SerialNumber: musb_hdrc


[ 53.192077] UBI: scrubbed PEB 2989 (LEB 0:2802), data moved to PEB 374


[ 114.037353] usb 1-2: new high speed USB device using ehci-omap and address 2


[ 114.195678] usb 1-2: configuration #1 chosen from 1 choice


[ 114.209655] hub 1-2:1.0: USB hub found


[ 114.210144] hub 1-2:1.0: 4 ports detected


[ 114.444458] usb 1-2: New USB device found, idVendor=05e3, idProduct=0608


[ 114.444458] usb 1-2: New USB device strings: Mfr=0, Product=1, SerialNumber=0


[ 114.444488] usb 1-2: Product: USB2.0 Hub


[ 114.545532] usb 1-2.1: new high speed USB device using ehci-omap and address 3


[ 114.664550] usb 1-2.1: configuration #1 chosen from 1 choice


[ 114.678558] hub 1-2.1:1.0: USB hub found


[ 114.679046] hub 1-2.1:1.0: 4 ports detected


[ 114.897613] usb 1-2.1: New USB device found, idVendor=05e3, idProduct=0608


[ 114.897644] usb 1-2.1: New USB device strings: Mfr=0, Product=1, SerialNumber=0


[ 114.897644] usb 1-2.1: Product: USB2.0 Hub


[ 114.998748] usb 1-2.3: new low speed USB device using ehci-omap and address 4


[ 115.131683] usb 1-2.3: configuration #1 chosen from 1 choice


[ 115.186828] input: Microsoft Microsoft� 2.4GHz Transceiver V2.0 as /devices/platform/ehci-omap.0/usb1/1-2/1-2.3/1-2.3:1.0/input/input8


[ 115.249786] input: USB HID v1.11 Mouse [Microsoft Microsoft� 2.4GHz Transceiver V2.0] on usb-ehci-omap.0-2.3


[ 115.250427] usb 1-2.3: New USB device found, idVendor=045e, idProduct=071f


[ 115.250457] usb 1-2.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0


[ 115.250457] usb 1-2.3: Product: Microsoft� 2.4GHz Transceiver V2.0


[ 115.250488] usb 1-2.3: Manufacturer: Microsoft


[ 115.350372] usb 1-2.1.2: new full speed USB device using ehci-omap and address 5


[ 115.486816] usb 1-2.1.2: configuration #1 chosen from 1 choice


[ 115.506286] HID device claimed by neither input, hiddev nor hidraw


[ 115.516174] HID device claimed by neither input, hiddev nor hidraw


[ 115.517089] usb 1-2.1.2: New USB device found, idVendor=046d, idProduct=c22f


[ 115.517089] usb 1-2.1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0


[ 115.517120] usb 1-2.1.2: Product: Logitech Cordless RumblePad 2


[ 115.517120] usb 1-2.1.2: Manufacturer: Logitech


[ 115.615997] usb 1-2.1.4: new low speed USB device using ehci-omap and address 6


[ 115.738677] usb 1-2.1.4: configuration #1 chosen from 1 choice


[ 115.759765] input: Wireless Keyboard/Mouse as /devices/platform/ehci-omap.0/usb1/1-2/1-2.1/1-2.1.4/1-2.1.4:1.0/input/input9


[ 115.819793] input: USB HID v1.11 Keyboard [Wireless Keyboard/Mouse] on usb-ehci-omap.0-2.1.4


[ 115.835418] input: Wireless Keyboard/Mouse as /devices/platform/ehci-omap.0/usb1/1-2/1-2.1/1-2.1.4/1-2.1.4:1.1/input/input10


[ 115.937377] input: USB HID v1.11 Mouse [Wireless Keyboard/Mouse] on usb-ehci-omap.0-2.1.4


[ 115.938018] usb 1-2.1.4: New USB device found, idVendor=099a, idProduct=7202


[ 115.938018] usb 1-2.1.4: New USB device strings: Mfr=0, Product=2, SerialNumber=0


[ 115.938049] usb 1-2.1.4: Product: Wireless Keyboard/Mouse


[ 120.896453] usb 1-2.1.2: USB disconnect, address 5


[ 121.186553] usb 1-2.1.2: new full speed USB device using ehci-omap and address 7


[ 121.307403] usb 1-2.1.2: configuration #1 chosen from 1 choice


[ 121.315704] usb 1-2.1.2: New USB device found, idVendor=046d, idProduct=c21f


[ 121.315734] usb 1-2.1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3


[ 121.315734] usb 1-2.1.2: Product: Wireless Gamepad F710


[ 121.315765] usb 1-2.1.2: Manufacturer: Logitech


[ 121.315765] usb 1-2.1.2: SerialNumber: 1CF090D0


[ 124.224090] usb 1-2.1.2: USB disconnect, address 7


[ 124.529937] usb 1-2.1.2: new full speed USB device using ehci-omap and address 8


[ 124.650787] usb 1-2.1.2: configuration #1 chosen from 1 choice


[ 124.666198] input: Logitech Logitech Cordless RumblePad 2 as /devices/platform/ehci-omap.0/usb1/1-2/1-2.1/1-2.1.2/1-2.1.2:1.0/input/input11


[ 124.748931] input: USB HID v1.11 Gamepad [Logitech Logitech Cordless RumblePad 2] on usb-ehci-omap.0-2.1.2


[ 124.749816] usb 1-2.1.2: New USB device found, idVendor=046d, idProduct=c219


[ 124.749816] usb 1-2.1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0


[ 124.749847] usb 1-2.1.2: Product: Logitech Cordless RumblePad 2


[ 124.749847] usb 1-2.1.2: Manufacturer: Logitech


[ 128.221832] aufs test_add:243:mount[1570]: uid/gid/perm /mnt/pnd/qjoypad 1000/1000/0775, 0/0/0777


[ 129.254638] UBI: scrubbed PEB 3039 (LEB 0:1853), data moved to PEB 368


[ 179.196258] aufs test_add:243:mount[1708]: uid/gid/perm /mnt/pnd/op_wifi 1000/1000/0755, 0/0/0777


[ 179.734649] Generic kernel compatibility enabled based on linux-next next-20100113


[ 179.983032] cfg80211: Calling CRDA to update world regulatory domain


[ 181.226440] lib80211: common routines for IEEE802.11 drivers


[ 181.226470] lib80211_crypt: registered algorithm 'NULL'


[ 181.281585] lib80211_crypt: registered algorithm 'TKIP'


[ 181.324279] lib80211_crypt: registered algorithm 'WEP'


[ 181.362762] lib80211_crypt: registered algorithm 'CCMP'


[ 181.533843] Pandora WiFi: Probe started


[ 181.560882] Sending insert event for MMC3...


[ 181.560913] Pandora WiFi: Probe done


[ 181.617462] mmc2: card claims to support voltages below the defined range. These will be ignored.


[ 181.617492] mmc2: SDIO card claims to support the incompletely defined 'low voltage range'. This will be ignored.


[ 181.618957] mmc2: new SDIO card at address 0001


[ 181.726196] wl1251: using dedicated interrupt line


[ 182.188262] phy0: Selected rate control algorithm 'minstrel'


[ 182.189056] wl1251: loaded


[ 182.189056] wl1251: initialized


[ 183.740509] sdio_reset_comm():


[ 183.756500] wl1251_sdio mmc2:0001:1: firmware: requesting wl1251-fw.bin


[ 184.701507] wl1251: 154 tx blocks at 0x3b788, 35 rx blocks at 0x3a780


[ 184.718841] wl1251: firmware booted (Rev 6.0.4.235)


[ 184.756134] phy0: device now idle


[ 184.866333] ADDRCONF(NETDEV_UP): wlan0: link is not ready


[ 184.872741] wl1251: rare event: 00001000


[ 200.226043] phy0: device no longer idle - scanning


[ 201.092254] phy0: device now idle


[ 201.112792] phy0: device no longer idle - scanning


[ 201.122650] wl1251: rare event: 00001000


[ 201.959350] phy0: device now idle


[ 201.961822] phy0: device no longer idle - scanning


[ 202.046173] wlan0: deauthenticating from c70355ac by local choice (reason=3)


[ 202.050720] wl1251: rare event: 00001000


[ 202.113708] wlan0: authenticate with c711e6e8 (try 1)


[ 202.120117] wlan0: authenticated


[ 202.120147] phy0: device now idle


[ 202.120605] wlan0: associate with c711ee68 (try 1)


[ 202.120666] phy0: device no longer idle - working


[ 202.164367] wl1251: rare event: 00001000


[ 202.170623] wlan0: RX AssocResp from c712c81a (capab=0x421 status=0 aid=1)


[ 202.170654] wlan0: associated


[ 202.170684] phy0: Allocated STA c70e69e8


[ 202.173553] phy0: Inserted STA c70e69e8


[ 202.251373] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready


[ 212.529571] wlan0: no IPv6 routers present


[ 269.948394] aufs test_add:243:mount[2218]: uid/gid/perm /mnt/pnd/midori 1000/1001/0777, 0/0/0777


dan-openpandora:~$
 
Did you try to connect the gamepad to a hub first, then plugging the hub in?
 
Notaz: WizardStan told me to post this here (from a thread I posted in the Support forum)


----


I've got one of the 256MB units... and am running the Super Zaxxon firmware.


If I "shutdown" the unit, how long should the battery last?


I shut it down on Sunday, and plugged it in today.... it booted it upon plug in and showed 75% battery life...


but the internal clock/date was a day and a half behind (they were set correctly before I shut it down).


Any ideas?


thanks,


Christopher.


----


No, it shouldn't. It also shouldn't be losing 25% in just a few days. I haven't done extensive tests with 3.2, but I remember leaving my Pandora off for exactly 10 days and extrapolating that out to approximately 3 months when I first got mine. The clock also kept perfect time during those days.


To be sure, open a terminal and type first "date" and then "hwclock". The first command displays the software clock, the second displays the hardware clock. They should be the same. Or they should be different by timezone, I forget, I keep messing with my clocks. If the hardware clock is correct and just the software clock is wrong, then we need to file a bug report. If the hardware clock is wrong, then there is something even more peculiar going on. -- WizardStan


-----


Just did that right now: (10:35pm EST)


date


Thu Jul 19 22:35:14 EDT 2012


hwclock


Fri Jul 20 02:35:18 2012 0.000000 seconds


--- Christopher


------


The hardware clock is fine. The software clock was not brought to sync when it booted up. Very odd. It used to. Post this into the 3.2 kernel thread in the beta forum, see if Notaz has any idea what's up. When I get a chance I'll check it myself to confirm.-- Wizardstan


----
 
No, this was my mistake. I was tired and not completely paying attention when I was trying to help. Both those clocks are fine as they are. There does seem to be something odd going on with the clock, but I'll have to wait a couple days to figure it out.
 
Last edited by a moderator:
I found two "problems":

  • I've created a tool that lets users create pnds consisting of dos games bundled with a dosbox build. The pnds aren't mountable with the new kernel (error msg: "wrong fs type, bad option, bad superblock on /dev/loop0, missing codepage or ...", dmesg says "SQUASHFS error, unable to read id index table"), but work fine with the old kernel
  • I tried to create a Ad-Hoc Network with Xfces Network Manager frontend (a simple one with no security). After the dialog box closed itself, Network Manager tries to connect to it and freezes the system after 4 or 5 seconds (reset needed). With the old kernel Network Manager tries to connect to it two times and fails then, but the system doesn't freeze
 
You couldn't possibly add the gspca_ov534 module? It's for the Playstation Eye USB webcam. The gspca_main module seems to be in the firmware already. Would be awesome to use my webcam with the Pandora :D
 
Last edited by a moderator:
thatgui said:
I found two "problems":

  • I've created a tool that lets users create pnds consisting of dos games bundled with a dosbox build. The pnds aren't mountable with the new kernel (error msg: "wrong fs type, bad option, bad superblock on /dev/loop0, missing codepage or ...", dmesg says "SQUASHFS error, unable to read id index table"), but works fine with the old kernel
Click to expand...
I know, not nice bumping my own aches, but notaz where there any package updates regarding mount / squashfs (or anything else that could be related) in the last 3-4 months ?. I currently trying to get this problem sorted out, I'm also in contact with one of the guys that wrote the library I'm using
 
Well the kernel part has obviously changed since it got some development in mainline tree. How are those PNDs created exactly, mksquashfs? Maybe it's using some older file format that got dropped in the new kernels, and updating creation tools would help? Do you have some sample pnd files with that problem?
 
notaz said:
Do you have some sample pnd files with that problem?
Click to expand...
I'm currently "on the road" only accompanied by my Pandora, so I can't provide a special sample right now. But you can look in here and create your own sample, or look at the attachment of this post to get one.


Thanks for looking into this.


Edit: The squashfs container ist created with a .Net library (.Net Discutils)
 
Last edited by a moderator:
May i ask to enable the Siano SMS1xxx smsmdtv module plz ?


And also the af9033 dvb_usb_af9035


It's for DVB.
 
Last edited by a moderator:
You must log in or register to reply here.

Similar threads

EvilDragon
Release SuperZaxxon - Beta 2 released
6 7 8
Replies
148
Views
23K
skeezix
skeezix
notaz
Kernel update to 3.2.57
2 3 4
Replies
76
Views
15K
rSl
rSl
EvilDragon
Release SuperZaxxon - Beta 5 released
12 13 14
Replies
270
Views
48K
WizardStan
WizardStan
EvilDragon
Release SuperZaxxon - Beta 3 released
14 15 16
Replies
307
Views
40K
PowerGod
PowerGod
EvilDragon
Release SuperZaxxon v1.51 released!
2 3 4
Replies
79
Views
15K
klapse
klapse
Back
Top