Bosbeetle
Terminally lost
So it's pretty safe to say that mine's done. (250-350)
Ran Out Of Boards?
- Thread starter korky
- Start date
cappuchok
Member
Ordered from Craig.kingoddball said:
Last edited by a moderator:
neogramps
Member
I think they have been stockpiling all last week and waiting for any other niggles to arise from the first few so that they can make sure that everything is getting caught at assembly.
At the moment i reckon only about 100-150 have been shipped, but Craig has said hundreds will be going out this week, so there will be a lot of happy people (myself included) this week.
At the moment i reckon only about 100-150 have been shipped, but Craig has said hundreds will be going out this week, so there will be a lot of happy people (myself included) this week.
gruso
thunderbox
Here it comes.
http://pandorapress.net/2010/05/31/the-weekend-in-review/comment-page-1/#comment-14102
http://pandorapress.net/2010/05/31/the-weekend-in-review/comment-page-1/#comment-14102
quadomatic
DingooWiki Admin
MooTheKow said:
Many were finished this past weekend, which was a long weekend that they wouldn't have been able to ship during.
Last edited by a moderator:
sebt3
homebrew player (P. & C.)
cappuchok said:
Bosbeetle said:
MooTheKow said:
I'm in the 200-300 range from craigx and still no "shipping confirmation email".
so I'm the #4 in this thread waiting for this email.
Last edited by a moderator:
Bosbeetle
Terminally lost
sebt3 said:
And the 4 of us probably get it around the same time
patience is a virtue
Last edited by a moderator:
Aninhumer
Guy with scary face.
cappuchok said:
Bosbeetle said:
MooTheKow said:
Don't forget they're doing extensive quality control checking now.sebt3 said:
Craig only said they'd finished them, not that they'd all been tested.
Last edited by a moderator:
Aninhumer said:
You see i worried about this
this means several units could have minor yet very annoying flaws
They would probably be too demotivated (and even then it bad to take so many apart again)
to put the working parts into the other pandoras, so one or two pandoras have all the minor flaws
right that wasnt as clear as i was wanting
anyway hes on the floor im not
Last edited by a moderator:
Aninhumer
Guy with scary face.
There have been very few unfixable flaws so far.emcp said:
The only one is that a small number of them have been found to have one broken nub, and Craig was even saying those can probably be fixed when they have time later.
Last edited by a moderator:
urjaman
"I Know. We're going for a ride."
People should try to read the thread before posting in it.DroneB Dev said:
They had 700 in UK, 800 more populated (no location specified), somebody assumed in UK. Looks like they were in Texas....
EDIT: I checked the link (duh). ED said in the blog about as above. Craig posted that they have parts for 1500. I didnt see that one coming...
Last edited by a moderator:
They never had 1500
i reading the posts which mentioned 1500 and the following comments made by people, they got it totally incorrect
they had 700, there were abouts 1500 boards made (i believe) but werent shipped
that means the rest are shipping thursday/friday (according to craigs twitter)
also i know there been very few unfixable flaws
but what i was, was the ones which are fixable are going to have to be dissembled again to be fixed
You know the way it is with things, when theyve been assembled its best to leave it that way
anyway no biggy (i wasnt moaning)
i reading the posts which mentioned 1500 and the following comments made by people, they got it totally incorrect
they had 700, there were abouts 1500 boards made (i believe) but werent shipped
that means the rest are shipping thursday/friday (according to craigs twitter)
also i know there been very few unfixable flaws
but what i was, was the ones which are fixable are going to have to be dissembled again to be fixed
You know the way it is with things, when theyve been assembled its best to leave it that way
anyway no biggy (i wasnt moaning)
Caine
Hardcore Member
No, apparently the last 800 of the 1500 units hadn't shipped yet. I understood that those arrive end of this week (Thu/Fri). The 700 units finished are the ones that required the resistor patch.
<edit>Hmmm...ninjas...</edit>
I'm seriously worried about the time it will take for the cases to finish and the lack of news on production of the boards suggests that this isn't processing at such a rapid pace either.
As speculation is rampant again, a small roadmap update of the team would be highly appreciated.
- Have the rest of the cases been ordered? (Would happen this week)
- What is the promised delivery date? (Add 2-4 weeks to get the actual one)
- How is board production processing?
- Estimated time remaining for assembly based on prior experiences under assumption that parts arrive in time (they won't)
- How are the 700 units which have now shipped divided amongst the various shops. (When can customers of ED expect units?)
- What exactly happened to the TV-out cable? (I understood it was an earthquake related delay)
- What defects have you encountered so far and how are you addressing these?
Some answers to this are floating around the board, but it would be good to have a formal and combined answer which we can refer to.
Thanks for all the work so far. Don't forget to take some rest.
<edit>Hmmm...ninjas...</edit>
I'm seriously worried about the time it will take for the cases to finish and the lack of news on production of the boards suggests that this isn't processing at such a rapid pace either.
As speculation is rampant again, a small roadmap update of the team would be highly appreciated.
- Have the rest of the cases been ordered? (Would happen this week)
- What is the promised delivery date? (Add 2-4 weeks to get the actual one)
- How is board production processing?
- Estimated time remaining for assembly based on prior experiences under assumption that parts arrive in time (they won't)
- How are the 700 units which have now shipped divided amongst the various shops. (When can customers of ED expect units?)
- What exactly happened to the TV-out cable? (I understood it was an earthquake related delay)
- What defects have you encountered so far and how are you addressing these?
Some answers to this are floating around the board, but it would be good to have a formal and combined answer which we can refer to.
Thanks for all the work so far. Don't forget to take some rest.
Monk
Caveman Ninja
Decided against it
droneb
Well-Known Member
- Joined
- Aug 28, 2009
- Messages
- 1,072
urjaman said:
people should understand that this board now has more speculation than trolls.
also understand that Cx one liners are bound to any miss interpretation
and that there is no official word so im not the only one that made that mistake
its been the same Sh*t with the Tv out cables and the PSUs and other extra stuff
so save your "People should try to read the thread before posting in it." for people that
really dont read before posting like some other noob in some other thread.
Last edited by a moderator:
gruso
thunderbox
Oh lawdy.Gruso said:
Last edited by a moderator:
