benniboi
Still Fresh
My Legend 2Gb SD card works just fine after the upgrade
Last edited by a moderator:
Firmware 1.2.0
- Thread starter mittens
- Start date
My Legend 2Gb SD card works just fine after the upgrade
donny662
Member
I just upgraded with an A-Data 1GB card, and both the kernel and patch work perfectly. My SD still works also. I upgraded while using my Energizer 2500mah NiMH batteries, which had medium power. Last upgrade I accidently didn't switch my batteries, which were on low power, yet the upgrade still worked fine. Still, halfway through that upgrade I remembered they were low on power; it scared the crap out of me until the upgrade was successful.
I love the updated pic viewer; I have all of the Calvin and Hobbes comic strips, and they weren't at all readable until now.
I love the updated pic viewer; I have all of the Calvin and Hobbes comic strips, and they weren't at all readable until now.
daclassicgamingmaster
It Is Your Birthday.
Updated and everything seems wonderful. the 4 way menu selection is beyond helpful, and the new photo viewer kicks ass. Great update IMHO
I updated with one of those AData MyFlash 512mb sd cards and had the default skin and whatnot, everything works just dandy...I can finally read my garfield, online comic, and manga collection on the go...
Sweet...I just tested some avi's that used to have out of sink sound and it's in sink now...Looney Tunes Golden Collection here I come...
Sweet...I just tested some avi's that used to have out of sink sound and it's in sink now...Looney Tunes Golden Collection here I come...
PSyMastR
\m/O__O\m/
Well, see I told you it would be alright.people (and by people I mean a single person) kept trying to get me to update without even reading a thread. Those people (and by people I mean PSYMASTR) ARE DUMBASSES
Im glad i didnt upgrade yet. Not that it would be too difficult to downgrade, but im happy with the recent 1.1.0 release, so thats where ill stay until a decent upgrade comes along. Shouldn\'t be long
EDIT: I forgot to post I updated fine.
Last edited by a moderator:
mooseknuckle2000
Member
c'mon drmd tv-out support
chaos engineer
tit for tat
do not worry. Upgrade worked fine here, and I am still able to use my 2GB SanDisk Ultra II SD card.
(your signature looks like a phallus)
Last edited by a moderator:
aitorpc
Still Fresh
Don`t upgrade to 1.2.0 please, I have lost the support of my SD card 1GB Kingston in 1.2.0. Wait until this problem be fixed!!
Finn
Still Fresh
Somebody said that A-data 1GB works fine after upgrade so i did the same.Upgraded mine and now i enjoy 4-way navigation and my ADATA 1GB is working fine 
reallynotnick
The smartest newb
Last edited by a moderator:
Eolair
I am become death, the destroyer of worlds
Cool, I have A-data 1GB. Maybe I should upgrade thenSomebody said that A-data 1GB works fine after upgrade so i did the same.Upgraded mine and now i enjoy 4-way navigation and my ADATA 1GB is working fine
Edit: Upgraded, everything's fine. ADATA 1GB definately works
Last edited by a moderator:
Squidge
Certified Guru
http://gp2x.co.kr/support/support_notice_v...&page=1&part=00
Firmware 1.2.1 is coming soon, probably best to be patient, people
Firmware 1.2.1 is coming soon, probably best to be patient, people
Eolair
I am become death, the destroyer of worlds
You should've posted that before I upgraded. Now I have to do it againhttp://gp2x.co.kr/support/support_notice_v...age=1∂=00
Firmware 1.2.1 is coming soon, probably best to be patient, people
Last edited by a moderator:
dennis20014
Member
Yea I wouldn't recommend upgrading, as much complaints I'm not going too
PSyMastR
\m/O__O\m/
I upgraded, and its fine...
thetictacaddict
Still Fresh
I upgraded with a 1GB Integral card (didn't that work fine for others?). The firmware upgrade seemed to work, but it would no longer recognize either of my 1GB cards (Integral and Kingston), so I downgraded to 1.1.0 which works fine. (I never applied the 1.2.0 patch because I couldn't see it.)
Upgrade worked fine, and I was blessed today it seems as all 3 of my SD cards that I normally use work. (SanDisk 1GB, Ultra II 1 GB and pqi MMC 1GB)
Wanting to test photos straight from my camera though turned up a card that doesn't work, Kingston 512MB. Looks like more then just the 1GB Kingstons don't work. It was formatted as FAT, but formatted as FAT32 rendered no better results.
Since that card doesn't really matter to me, I'm sticking with the new firmward, the new picture viewer is quite nice... Hitting Y pulls up a icon driven menu for picture functions. (Undocumented I think)
As for the normal menus my only complaint is you still can't hit X to go back from the SD card menu to the main menu. I love the 4 directional joystick movement, not sure about the wrap around on the main. Oh they also fixed the problem with double jumping, when you go to a menu item it stays there, doesn't skip past to the next one.
If they can fix that SD bug and add X to exit SD/NAND selection, the next patch will be spot on.
Wanting to test photos straight from my camera though turned up a card that doesn't work, Kingston 512MB. Looks like more then just the 1GB Kingstons don't work. It was formatted as FAT, but formatted as FAT32 rendered no better results.
Since that card doesn't really matter to me, I'm sticking with the new firmward, the new picture viewer is quite nice... Hitting Y pulls up a icon driven menu for picture functions. (Undocumented I think)
As for the normal menus my only complaint is you still can't hit X to go back from the SD card menu to the main menu. I love the 4 directional joystick movement, not sure about the wrap around on the main. Oh they also fixed the problem with double jumping, when you go to a menu item it stays there, doesn't skip past to the next one.
If they can fix that SD bug and add X to exit SD/NAND selection, the next patch will be spot on.
C
codeninja
Guest
http://gp2x.co.kr/support/support_notice_v...&page=1&part=00
Firmware 1.2.1 is coming soon, probably best to be patient, people
They'll release it by Monday, and it's a specific fix for Toshiba-made SD cards. I don't know what SD cards are manufactured by Toshiba, though.
Last edited by a moderator:
halo9
Member
Just for the record, after some deliberation (I don't yet have a suitable AC/DC adapter) I reinstalled the supplied GP2X skin and decided to upgrade my firmware to 1.2.0.
All seems to have gone smoothly with my freshly FAT32 formatted 1Gb Sandisk SD card and two freshly charged Ni-MH 2.3Ah Uniross rechargeables. The batteries still report as full after the process.
Phew..
All seems to have gone smoothly with my freshly FAT32 formatted 1Gb Sandisk SD card and two freshly charged Ni-MH 2.3Ah Uniross rechargeables. The batteries still report as full after the process.
Phew..
