SuperZaxxon v1.54 RC released

[Askarus]

Is everything required for DisplayLink included now?

 

[Linux-SWAT]

I think so. Kernel driver + X driver.

 

[leathco]

How do i look that up? Im a bit new to Pandora...

Sent from my HTCEVOV4G using Tapatalk 2

 

[Linux-SWAT]

http://pandorawiki.org/Firmware

 

[Loonie]

I'm not quite sure about the SGX side of it; this is the updated kernel that can run the newer SGX drivers and still requires the SGX driver installer PND, right?

 

[notaz]

Yeah, .pnd contains all the binary blobs, they take a lot of space and can't be all included in NAND at once.

 

[Linux-SWAT]

Maybe add the link to the SGX .pnd in post #1 ?

 

[Loonie]

Yeah, .pnd contains all the binary blobs, they take a lot of space and can't be all included in NAND at once.

That does indeed make sense.

All seems good with this update so far.

 

[Linux-SWAT]

Something went wrong on my CC.

After the reboot, i lost the keyboard, then i rebooted, and the boot progress bar stayed under "powered". Not led were on.

Pandora button + power switch, i got a black screen.

One more hard reboot and all seems ok now.

 

[Linux-SWAT]

Also, the charge led works badly, as usual.

The Xfce battery monitor is a better indicator :/. Maybe it would be better to use the same routine as it ?

---EDIT:

Still on my CC, the power button doesn't work. Can't put in low power.

---EDIT2:

I can't even shutdown the unit when holding it.

---EDIT3:

Rebooted the unit again while AC on, same hang with the progress bar staying under "powered".

 

[notaz]

Try removing the battery for 5 minutes, sounds like the power chip went insane so you need to reset it.

 

[Linux-SWAT]

I reflashed. Seems ok now.

 

[budweiser]

Also, the charge led works badly, as usual.

The Xfce battery monitor is a better indicator :/. Maybe it would be better to use the same routine as it ?

---EDIT:

Still on my CC, the power button doesn't work. Can't put in low power.

Works fine for me on cc unit

---EDIT2:

I can't even shutdown the unit when holding it.

This also works fine for me

---EDIT3:

Rebooted the unit again while AC on, same hang with the progress bar staying under "powered".

 

[Zero3K]

My USB Wifi Dongle (which is has the rtl8192cu chipset) doesn't work anymore when I upgraded to it. Also, the charging LED didn't come one when my Pandora was turned on via an AC Adapter.

 

[BAFelton]

Tried SGX Drivers 4.03.00.02, works fine with AVP.

 

[notaz]

My USB Wifi Dongle (which is has the rtl8192cu chipset) doesn't work anymore when I upgraded to it. Also, the charging LED didn't come one when my Pandora was turned on via an AC Adapter.

Strange, the driver is still there. What's in your /etc/modprobe.conf ?

 

[Shaokahn]

Thanks for the Pandora OS Update

Updated on my GHz Pandora successfully, previously i have had SuperZaxxon v1.53 with the Kernel Update for the SGX Driver PND.

For accessing the Internet and updating the OS i've used the WiFi Dongle from ED's Shop : https://www.dragonbox.de/en/accessories/35-caanoo-wifi-dongle-schwarz-1.html .

After rebooting the OS i've avtivated the USB Host and the WiFi Dongle doesn't work anymore . It is not recognising by the Network Icon and only Shows me

"No network connection"  :mellow:

Here's a dmesg Output from the Terminal:

Spoiler

pandora:~$ dmesg

[    0.000000] Linux version 3.2.39 (notaz@pixelinis) (gcc version 4.5.2 (Sourcery G++ Lite 2011.03-41) ) #833 Tue Mar 12 23:57:02 EET 2013
[    0.000000] CPU: ARMv7 Processor [413fc082] revision 2 (ARMv7), cr=10c5387d
[    0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[    0.000000] Machine: Pandora Handheld Console
[    0.000000] cma: CMA: reserved 16 MiB at 9e800000
[    0.000000] Memory policy: ECC disabled, Data cache writeback
[    0.000000] On node 0 totalpages: 129536
[    0.000000] free_area_init_node: node 0, pgdat c05b014c, node_mem_map c05e2000
[    0.000000]   Normal zone: 1024 pages used for memmap
[    0.000000]   Normal zone: 0 pages reserved
[    0.000000]   Normal zone: 128512 pages, LIFO batch:31
[    0.000000] OMAP3630 ES1.2 (l2cache iva sgx neon isp 192mhz_clk )
[    0.000000] Clocking rate (Crystal/Core/MPU): 26.0/400/600 MHz
[    0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
[    0.000000] pcpu-alloc: [0] 0
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 128512
[    0.000000] Kernel command line: ubi.mtd=4 ubi.mtd=3 root=ubi0:rootfs rootfstype=ubifs rw rootflags=bulk_read vram=6272K omapfb.vram=0:3000K mmc_core.removable=0 quiet
[    0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
[    0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.000000] Memory: 506MB = 506MB total
[    0.000000] Memory: 491172k/491172k available, 33116k reserved, 0K highmem
[    0.000000] Virtual kernel memory layout:
[    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
[    0.000000]     fixmap  : 0xfff00000 - 0xfffe0000   ( 896 kB)
[    0.000000]     vmalloc : 0xe0800000 - 0xf8000000   ( 376 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xe0000000   ( 512 MB)
[    0.000000]     modules : 0xbf000000 - 0xc0000000   (  16 MB)
[    0.000000]       .text : 0xc0008000 - 0xc0541640   (5350 kB)
[    0.000000]       .init : 0xc0542000 - 0xc0573000   ( 196 kB)
[    0.000000]       .data : 0xc0574000 - 0xc05b08c0   ( 243 kB)
[    0.000000]        .bss : 0xc05b08e4 - 0xc05e1ae0   ( 197 kB)
[    0.000000] SLUB: Genslabs=11, HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[    0.000000] NR_IRQS:410
[    0.000000] IRQ: Found an INTC at 0xfa200000 (revision 4.0) with 96 interrupts
[    0.000000] Total of 96 interrupts on 1 active controller
[    0.000000] OMAP clockevent source: GPTIMER1 at 32768 Hz
[    0.000000] sched_clock: 32 bits at 32kHz, resolution 30517ns, wraps every 131071999ms
[    0.000000] Console: colour dummy device 80x30
[    0.000000] console [tty0] enabled
[    0.000152] Calibrating delay loop... 597.64 BogoMIPS (lpj=2334720)
[    0.039093] pid_max: default: 32768 minimum: 301
[    0.039337] Mount-cache hash table entries: 512
[    0.039733] Initializing cgroup subsys devices
[    0.039794] CPU: Testing write buffer coherency: ok
[    0.039978] hw perfevents: enabled with ARMv7 Cortex-A8 PMU driver, 5 counters available
[    0.040069] Setting up static identity map for 0x803e4578 - 0x803e45d0
[    0.040679] devtmpfs: initialized
[    0.051696] print_constraints: dummy:
[    0.052947] NET: Registered protocol family 16
[    0.054656] DMA: preallocated 256 KiB pool for atomic coherent allocations
[    0.055053] GPMC revision 5.0
[    0.058044] OMAP GPIO hardware version 2.5
[    0.061248] omap_mux_init: Add partition: #1: core, flags: 0
[    0.067565] Reprogramming SDRC clock to 400000000 Hz
[    0.069702] hw-breakpoint: debug architecture 0x4 unsupported.
[    0.076446]  omap-mcbsp.2: alias fck already exists
[    0.076751]  omap-mcbsp.3: alias fck already exists
[    0.078186] OMAP DMA hardware revision 5.0
[    0.093017] bio: create slab <bio-0> at 0
[    0.094177] print_constraints: vwlan: 1800 mV
[    0.095672] SCSI subsystem initialized
[    0.097961] usbcore: registered new interface driver usbfs
[    0.098175] usbcore: registered new interface driver hub
[    0.098419] usbcore: registered new device driver usb
[    0.109466] omap_i2c omap_i2c.1: bus 1 rev1.4.0 at 2600 kHz
[    0.112609] twl4030: PIH (irq 7) chaining IRQs 368..375
[    0.112701] twl4030: power (irq 373) chaining IRQs 376..383
[    0.113250] twl4030: gpio (irq 368) chaining IRQs 384..401
[    0.113677] _omap_mux_init_gpio: Could not set gpio192
[    0.114776] _omap_mux_init_gpio: Could not set gpio193
[    0.117340] print_constraints: VUSB1V5: 1500 mV normal standby
[    0.117980] print_constraints: VUSB1V8: 1800 mV normal standby
[    0.118530] print_constraints: VUSB3V1: 3100 mV normal standby
[    0.120086] twl4030_usb twl4030_usb: Initialized TWL4030 USB module
[    0.121398] print_constraints: vdd_mpu_iva: 600 <--> 1450 mV normal
[    0.121978] print_constraints: vdd_core: 600 <--> 1450 mV normal
[    0.122650] print_constraints: VMMC1: 1850 <--> 3150 mV at 3150 mV normal standby
[    0.123352] print_constraints: VDAC: 1800 mV normal standby
[    0.123992] print_constraints: VAUX2: 1800 mV normal standby
[    0.124664] print_constraints: VPLL2: 1800 mV normal standby
[    0.125396] print_constraints: VMMC2: 1850 <--> 3150 mV at 3150 mV normal standby
[    0.126037] print_constraints: VSIM: 2800 mV normal standby
[    0.126647] print_constraints: VAUX1: 3000 mV normal standby
[    0.127288] print_constraints: VAUX4: 3000 mV normal standby
[    0.140716] omap_i2c omap_i2c.3: bus 3 rev1.4.0 at 100 kHz
[    0.142883] omap-iommu omap-iommu.0: isp registered
[    0.143463] Advanced Linux Sound Architecture Driver Version 1.0.24.
[    0.144256] Switching to clocksource 32k_counter
[    0.165679] musb-hdrc: version 6.0, ?dma?, otg (peripheral+host)
[    0.171020] musb-hdrc: ConfigData=0xde (UTMI-8, dyn FIFOs, bulk combine, bulk split, HB-ISO Rx, HB-ISO Tx, SoftConn)
[    0.171051] musb-hdrc: MHDRC RTL version 1.800
[    0.171081] musb-hdrc: setup fifo_mode 4
[    0.171081] musb-hdrc: 28/31 max ep, 16384/16384 memory
[    0.171569] musb-hdrc musb-hdrc: USB OTG mode controller at fa0ab000 using DMA, IRQ 92
[    0.172332] NET: Registered protocol family 2
[    0.172485] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
[    0.172760] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
[    0.173126] TCP bind hash table entries: 16384 (order: 4, 65536 bytes)
[    0.173339] TCP: Hash tables configured (established 16384 bind 16384)
[    0.173339] TCP reno registered
[    0.173339] UDP hash table entries: 256 (order: 0, 4096 bytes)
[    0.173370] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[    0.173614] NET: Registered protocol family 1
[    0.173858] NetWinder Floating Point Emulator V0.97 (double precision)
[    0.175537] omap_dsp_init: 600000 bytes @ 9fa00000
[    0.179321] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    0.194427] VFS: Disk quotas dquot_6.5.2
[    0.194915] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    0.199707] msgmni has been set to 991
[    0.201477] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[    0.201507] io scheduler noop registered
[    0.201507] io scheduler deadline registered
[    0.201568] io scheduler cfq registered (default)
[    0.216369] OMAP DSS rev 2.0
[    0.219451] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    0.221466] omap_uart.0: ttyO0 at MMIO 0x4806a000 (irq = 72) is a OMAP UART0
[    0.221862] omap_uart.1: ttyO1 at MMIO 0x4806c000 (irq = 73) is a OMAP UART1
[    0.222259] omap_uart.2: ttyO2 at MMIO 0x49020000 (irq = 74) is a OMAP UART2
[    0.222747] omap_uart.3: ttyO3 at MMIO 0x49042000 (irq = 80) is a OMAP UART3
[    0.234283] brd: module loaded
[    0.240020] loop: module loaded
[    0.240051] OMAP overclocker loaded.
[    0.242156] omap2-nand driver initializing
[    0.242309] NAND device: Manufacturer ID: 0x2c, Chip ID: 0xbc (Micron NAND 512MiB 1,8V 16-bit)
[    0.242706] Creating 5 MTD partitions on "omap2-nand.0":
[    0.242736] 0x000000000000-0x000000080000 : "xloader"
[    0.243438] 0x000000080000-0x000000260000 : "uboot"
[    0.244323] 0x000000260000-0x000000280000 : "uboot-env"
[    0.244964] 0x000000280000-0x000000c80000 : "boot"
[    0.247375] 0x000000c80000-0x000020000000 : "rootfs"
[    0.337860] UBI: attaching mtd4 to ubi0
[    1.312530] UBI: scanning is finished
[    1.326721] UBI: attached mtd4 (name "rootfs", size 499 MiB) to ubi0
[    1.326751] UBI: PEB size: 131072 bytes (128 KiB), LEB size: 129024 bytes
[    1.326751] UBI: min./max. I/O unit sizes: 2048/2048, sub-page size 512
[    1.326782] UBI: VID header offset: 512 (aligned 512), data offset: 2048
[    1.326782] UBI: good PEBs: 3996, bad PEBs: 0, corrupted PEBs: 0
[    1.326812] UBI: user volume: 1, internal volumes: 1, max. volumes count: 128
[    1.326812] UBI: max/mean erase counter: 15/2, WL threshold: 4096, image sequence number: 872408449
[    1.326843] UBI: available PEBs: 0, total reserved PEBs: 3996, PEBs reserved for bad PEB handling: 39
[    1.326873] UBI: attaching mtd3 to ubi1
[    1.327270] UBI: background thread "ubi_bgt0d" started, PID 571
[    1.346984] UBI: scanning is finished
[    1.353790] UBI: attached mtd3 (name "boot", size 10 MiB) to ubi1
[    1.353790] UBI: PEB size: 131072 bytes (128 KiB), LEB size: 129024 bytes
[    1.353820] UBI: min./max. I/O unit sizes: 2048/2048, sub-page size 512
[    1.353820] UBI: VID header offset: 512 (aligned 512), data offset: 2048
[    1.353851] UBI: good PEBs: 80, bad PEBs: 0, corrupted PEBs: 0
[    1.353851] UBI: user volume: 1, internal volumes: 1, max. volumes count: 128
[    1.353881] UBI: max/mean erase counter: 18/7, WL threshold: 4096, image sequence number: 1151958563
[    1.353881] UBI: available PEBs: 0, total reserved PEBs: 80, PEBs reserved for bad PEB handling: 2
[    1.354064] UBI: background thread "ubi_bgt1d" started, PID 576
[    1.354156] usbcore: registered new interface driver libusual
[    1.354797] mousedev: PS/2 mouse device common for all mice
[    1.355438] input: keypad as /devices/platform/omap_i2c.1/i2c-1/1-004a/twl4030_keypad/input/input0
[    1.359741] input: power-button as /devices/platform/omap_i2c.1/i2c-1/1-0049/twl4030_pwrbutton/input/input1
[    1.361145] input: nub0 as /devices/platform/omap_i2c.3/i2c-3/3-0066/input/input2
[    1.362396] input: nub1 as /devices/platform/omap_i2c.3/i2c-3/3-0067/input/input3
[    1.368591] twl_rtc twl_rtc: rtc core: registered twl_rtc as rtc0
[    1.369659] i2c /dev entries driver
[    1.374053] bq27x00-battery 3-0055: support ver. 1.2.0 enabled
[    1.397735] OMAP Watchdog Timer Rev 0x31: initial timeout 60 sec
[    1.398132] twl4030_wdt twl4030_wdt: Failed to register misc device
[    1.398193] twl4030_wdt: probe of twl4030_wdt failed with error -16
[    1.398773] cpuidle: using governor ladder
[    1.398803] cpuidle: using governor menu
[    1.624298] Registered led device: pandora::sd1
[    1.624542] Registered led device: pandora::sd2
[    1.624786] Registered led device: pandora::bluetooth
[    1.625030] Registered led device: pandora::wifi
[    1.626434] Registered led device: pandora::keypad_bl
[    1.627471] Registered led device: pandora:ower
[    1.630187] Registered led device: pandora::charger
[    1.631378] usbcore: registered new interface driver usbhid
[    1.631408] usbhid: USB HID core driver
[    1.633483] OMAP3 Pandora SoC init
[    1.716674] asoc: twl4030-hifi <-> omap-mcbsp-dai.1 mapping ok
[    1.718139] asoc: twl4030-hifi <-> omap-mcbsp-dai.3 mapping ok
[    1.720428] ALSA device list:
[    1.720428]   #0: omap3pandora
[    1.720581] TCP cubic registered
[    1.720611] NET: Registered protocol family 17
[    1.720672] NET: Registered protocol family 15
[    1.720703] Registering the dns_resolver key type
[    1.720733] VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 3
[    1.720764] ThumbEE CPU extension supported.
[    1.720794] Registering SWP/SWPB emulation handler
[    1.727264] clock: disabling unused clocks to save power
[    1.728424] registered taskstats version 1
[    1.743347] Console: switching to colour frame buffer device 100x30
[    1.920349] regulator_init_complete: VAUX2: incomplete constraints, leaving on
[    1.922882] input: gpio-keys as /devices/platform/gpio-keys/input/input4
[    1.924346] twl_rtc twl_rtc: setting system clock to 2013-03-15 20:28:44 UTC (1363379324)
[    1.926055] UBIFS: background thread "ubifs_bgt0_0" started, PID 671
[    2.004760] UBIFS: mounted UBI device 0, volume 0, name "rootfs"(null)
[    2.004791] UBIFS: LEB size: 129024 bytes (126 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
[    2.004821] UBIFS: FS size: 508612608 bytes (485 MiB, 3942 LEBs), journal size 9033728 bytes (8 MiB, 71 LEBs)
[    2.004821] UBIFS: reserved for root: 0 bytes (0 KiB)
[    2.004852] UBIFS: media format: w4/r0 (latest is w4/r0), UUID 7F3FDFE9-E261-4537-ABCD-B44E834867BF, small LPT model
[    2.005706] VFS: Mounted root (ubifs filesystem) on device 0:14.
[    2.006469] devtmpfs: mounted
[    2.006774] Freeing init memory: 196K
[    2.277435] mmc0: host does not support reading read-only switch. assuming write-enable.
[    2.279571] mmc0: new high speed SDHC card at address b368
[    2.282745] mmcblk0: mmc0:b368 SDC   30.2 GiB
[    2.284942]  mmcblk0: p1
[    2.954193] udev: starting version 151
[    2.954803] udevd (722): /proc/722/oom_adj is deprecated, please use /proc/722/oom_score_adj instead.
[    3.133850] mmc1: host does not support reading read-only switch. assuming write-enable.
[    3.135955] mmc1: new high speed SDXC card at address 0007
[    3.155426] mmcblk1: mmc1:0007 SD64G 59.7 GiB
[    3.159271]  mmcblk1: p1
[    4.723297] alignment: ignoring faults is unsafe on this CPU.  Defaulting to fixup mode.
[    6.521972] mmc2: card claims to support voltages below the defined range. These will be ignored.
[    6.532989] mmc2: new SDIO card at address 0001
[    8.535644] ads7846 spi1.0: touchscreen, irq 254
[    8.536499] input: touchscreen as /devices/platform/omap2_mcspi.1/spi_master/spi1/spi1.0/input/input5
[    9.062713] fuse init (API version 7.17)
[   10.410064] NET: Registered protocol family 10
[   11.708862] FAT-fs (mmcblk0): bogus number of reserved sectors
[   11.708862] FAT-fs (mmcblk0): Can't find a valid FAT filesystem
[   11.888488] zram: module is from the staging directory, the quality is unknown, you have been warned.
[   11.890563] zram: num_devices not specified. Using default: 1
[   11.890594] zram: Creating 1 devices ...
[   11.908325] FAT-fs (mmcblk1): invalid media value (0x00)
[   11.908355] FAT-fs (mmcblk1): Can't find a valid FAT filesystem
[   12.348144] UBIFS: background thread "ubifs_bgt1_0" started, PID 1360
[   12.511840] UBIFS: mounted UBI device 1, volume 0, name "boot"(null)
[   12.511871] UBIFS: LEB size: 129024 bytes (126 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
[   12.511901] UBIFS: FS size: 8386560 bytes (7 MiB, 65 LEBs), journal size 1032193 bytes (0 MiB, 6 LEBs)
[   12.511901] UBIFS: reserved for root: 396117 bytes (386 KiB)
[   12.511932] UBIFS: media format: w4/r0 (latest is w4/r0), UUID A0F267F8-F401-4A2F-8786-75532D72FAC9, small LPT model
[   13.297149] FAT-fs (mmcblk0): bogus number of reserved sectors
[   13.297180] FAT-fs (mmcblk0): Can't find a valid FAT filesystem
[   13.449188] FAT-fs (mmcblk1): invalid media value (0x00)
[   13.449218] FAT-fs (mmcblk1): Can't find a valid FAT filesystem
[   13.838775] zram: disk size not provided. You can use disksize_kb module param to specify size.
[   13.838775] Using default: (25% of RAM).
[   13.839141] FAT-fs (zram0): bogus number of reserved sectors
[   13.839172] FAT-fs (zram0): Can't find a valid FAT filesystem
[   14.464721] platform mpu.0: max OPP set to 4
[   14.480712] FAT-fs (zram0): bogus number of reserved sectors
[   14.480743] FAT-fs (zram0): Can't find a valid FAT filesystem
[   14.740356] input: nub0 as /devices/platform/omap_i2c.3/i2c-3/3-0066/input/input6
[   14.796813] input: nub1 as /devices/platform/omap_i2c.3/i2c-3/3-0067/input/input7
[   14.942962] Adding 126932k swap on /dev/zram0.  Priority:5 extents:1 across:126932k SS
[   17.733001] SGX clock rate: 200000000
[   37.567199] Bluetooth: Core ver 2.16
[   37.568603] NET: Registered protocol family 31
[   37.568634] Bluetooth: HCI device and connection manager initialized
[   37.568634] Bluetooth: HCI socket layer initialized
[   37.568634] Bluetooth: L2CAP socket layer initialized
[   37.569641] Bluetooth: SCO socket layer initialized
[   47.719543] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[   48.730316] ehci-omap ehci-omap.0: OMAP-EHCI Host Controller
[   48.730346] sched: RT throttling activated
[   48.730773] ehci-omap ehci-omap.0: new USB bus registered, assigned bus number 1
[   48.731781] ehci-omap ehci-omap.0: irq 77, io mem 0x48064800
[   48.746307] ehci-omap ehci-omap.0: USB 2.0 started, EHCI 1.00
[   48.746398] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[   48.746398] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[   48.746429] usb usb1: Product: OMAP-EHCI Host Controller
[   48.746429] usb usb1: Manufacturer: Linux 3.2.39 ehci_hcd
[   48.746429] usb usb1: SerialNumber: ehci-omap.0
[   48.748382] hub 1-0:1.0: USB hub found
[   48.748413] hub 1-0:1.0: 3 ports detected
[   93.011871] usb 1-2: new high-speed USB device number 2 using ehci-omap
[   93.171356] usb 1-2: New USB device found, idVendor=0bda, idProduct=8176
[   93.171356] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[   93.171356] usb 1-2: Manufacturer: RR
[   93.171356] usb 1-2: SerialNumber: 00e04c000001
[  327.473266] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[  327.623809] aufs 3.2-20120109
[  327.625091] aufs test_add:261:mount[2127]: uid/gid/perm /mnt/pnd/op_wifi 1000/1000/0755, 0/0/0777
[  328.789001] cfg80211: Calling CRDA to update world regulatory domain
[  329.294067] wl1251: using dedicated interrupt line
[  329.386993] ieee80211 phy0: Selected rate control algorithm 'pid'
[  329.387542] wl1251: loaded
[  329.387908] wl1251: initialized
[  330.520233] wl1251: 154 tx blocks at 0x3b788, 35 rx blocks at 0x3a780
[  330.521179] wl1251: firmware booted (Rev 6.0.4.235)
[  330.601837] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[  341.876770] wlan0: deauthenticating from 30:85:a9:6b:92:98 by local choice (reason=3)
[  342.035614] wlan0: authenticate with 30:85:a9:6b:92:98 (try 1)
[  342.039672] wlan0: authenticated
[  342.039764] wlan0: associate with 30:85:a9:6b:92:98 (try 1)
[  342.043182] wlan0: RX AssocResp from 30:85:a9:6b:92:98 (capab=0x411 status=0 aid=2)
[  342.043182] wlan0: associated
[  342.091888] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[  352.957122] wlan0: no IPv6 routers present
[  419.487152] ISO 9660 Extensions: RRIP_1991A
[  419.786773] aufs test_add:261:mount[2469]: uid/gid/perm /mnt/pnd/hdonk_firefox_001 500/501/0755, 0/0/0777
[  642.129302] aufs test_add:261:mount[2718]: uid/gid/perm /mnt/pnd/op_wifi 1000/1000/0755, 0/0/0777
[  642.374603] wlan0: deauthenticating from 30:85:a9:6b:92:98 by local choice (reason=3)
[  642.389190] cfg80211: Calling CRDA to update world regulatory domain
[  642.391601] wl1251: down
[  642.618347] wl1251: unloaded
[  652.791351] ehci-omap ehci-omap.0: remove, state 1
[  652.791381] usb usb1: USB disconnect, device number 1
[  652.791381] usb 1-2: USB disconnect, device number 2
[  652.821197] ehci-omap ehci-omap.0: USB bus 1 deregistered
[  669.482482] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[  670.503753] ehci-omap ehci-omap.0: OMAP-EHCI Host Controller
[  670.504180] ehci-omap ehci-omap.0: new USB bus registered, assigned bus number 1
[  670.508300] ehci-omap ehci-omap.0: irq 77, io mem 0x48064800
[  670.519775] ehci-omap ehci-omap.0: USB 2.0 started, EHCI 1.00
[  670.519866] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[  670.519866] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[  670.519866] usb usb1: Product: OMAP-EHCI Host Controller
[  670.519897] usb usb1: Manufacturer: Linux 3.2.39 ehci_hcd
[  670.519897] usb usb1: SerialNumber: ehci-omap.0
[  670.522064] hub 1-0:1.0: USB hub found
[  670.522094] hub 1-0:1.0: 3 ports detected
[  670.847778] usb 1-2: new high-speed USB device number 2 using ehci-omap
[  671.007202] usb 1-2: New USB device found, idVendor=0bda, idProduct=8176
[  671.007202] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  671.007202] usb 1-2: Manufacturer: RR
[  671.007232] usb 1-2: SerialNumber: 00e04c000001
[  759.504852] ehci-omap ehci-omap.0: remove, state 1
[  759.504882] usb usb1: USB disconnect, device number 1
[  759.504882] usb 1-2: USB disconnect, device number 2
[  759.534423] ehci-omap ehci-omap.0: USB bus 1 deregistered
[  796.138946] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[  797.152191] ehci-omap ehci-omap.0: OMAP-EHCI Host Controller
[  797.153198] ehci-omap ehci-omap.0: new USB bus registered, assigned bus number 1
[  797.156158] ehci-omap ehci-omap.0: irq 77, io mem 0x48064800
[  797.168457] ehci-omap ehci-omap.0: USB 2.0 started, EHCI 1.00
[  797.168579] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[  797.168579] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[  797.168579] usb usb1: Product: OMAP-EHCI Host Controller
[  797.168609] usb usb1: Manufacturer: Linux 3.2.39 ehci_hcd
[  797.168609] usb usb1: SerialNumber: ehci-omap.0
[  797.176361] hub 1-0:1.0: USB hub found
[  797.176391] hub 1-0:1.0: 3 ports detected
[  820.996246] usb 1-2: new high-speed USB device number 2 using ehci-omap
[  821.155212] usb 1-2: New USB device found, idVendor=0bda, idProduct=8176
[  821.155242] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  821.155242] usb 1-2: Manufacturer: RR
[  821.155242] usb 1-2: SerialNumber: 00e04c000001
[  922.588806] ehci-omap ehci-omap.0: remove, state 1
[  922.588836] usb usb1: USB disconnect, device number 1
[  922.588867] usb 1-2: USB disconnect, device number 2
[  922.617919] ehci-omap ehci-omap.0: USB bus 1 deregistered
[ 1258.677703] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1259.691253] ehci-omap ehci-omap.0: OMAP-EHCI Host Controller
[ 1259.691711] ehci-omap ehci-omap.0: new USB bus registered, assigned bus number 1
[ 1259.695617] ehci-omap ehci-omap.0: irq 77, io mem 0x48064800
[ 1259.707122] ehci-omap ehci-omap.0: USB 2.0 started, EHCI 1.00
[ 1259.707214] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 1259.707214] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1259.707214] usb usb1: Product: OMAP-EHCI Host Controller
[ 1259.707244] usb usb1: Manufacturer: Linux 3.2.39 ehci_hcd
[ 1259.707244] usb usb1: SerialNumber: ehci-omap.0
[ 1259.709320] hub 1-0:1.0: USB hub found
[ 1259.709350] hub 1-0:1.0: 3 ports detected
[ 1260.035369] usb 1-2: new high-speed USB device number 2 using ehci-omap
[ 1260.195007] usb 1-2: New USB device found, idVendor=0bda, idProduct=8176
[ 1260.195007] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 1260.195007] usb 1-2: Manufacturer: RR
[ 1260.195037] usb 1-2: SerialNumber: 00e04c000001
[ 1400.127166] ehci-omap ehci-omap.0: remove, state 1
[ 1400.127197] usb usb1: USB disconnect, device number 1
[ 1400.127227] usb 1-2: USB disconnect, device number 2
[ 1400.155883] ehci-omap ehci-omap.0: USB bus 1 deregistered
[ 1448.142883] aufs test_add:261:mount[3128]: uid/gid/perm /mnt/pnd/op_wifi 1000/1000/0755, 0/0/0777
[ 1448.622985] wl1251: using dedicated interrupt line
[ 1448.715148] ieee80211 phy1: Selected rate control algorithm 'pid'
[ 1448.715667] wl1251: loaded
[ 1448.716003] wl1251: initialized
[ 1450.020202] wl1251: 154 tx blocks at 0x3b788, 35 rx blocks at 0x3a780
[ 1450.021148] wl1251: firmware booted (Rev 6.0.4.235)
[ 1450.086212] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 1461.361053] wlan0: deauthenticating from 30:85:a9:6b:92:98 by local choice (reason=3)
[ 1461.465301] wlan0: authenticate with 30:85:a9:6b:92:98 (try 1)
[ 1461.469818] wlan0: authenticated
[ 1461.469909] wlan0: associate with 30:85:a9:6b:92:98 (try 1)
[ 1461.473510] wlan0: RX AssocResp from 30:85:a9:6b:92:98 (capab=0x411 status=0 aid=2)
[ 1461.473541] wlan0: associated
[ 1461.513763] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 1472.457122] wlan0: no IPv6 routers present
[ 1474.062011] aufs test_add:261:mount[3420]: uid/gid/perm /mnt/pnd/op_wifi 1000/1000/0755, 0/0/0777
[ 1474.441802] wl1251: WARNING join timeout
[ 1474.441833] wlan0: deauthenticating from 30:85:a9:6b:92:98 by local choice (reason=3)
[ 1474.458435] cfg80211: Calling CRDA to update world regulatory domain
[ 1474.460723] wl1251: down
[ 1474.682495] wl1251: unloaded
[ 1478.627807] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1479.644378] ehci-omap ehci-omap.0: OMAP-EHCI Host Controller
[ 1479.644744] ehci-omap ehci-omap.0: new USB bus registered, assigned bus number 1
[ 1479.649291] ehci-omap ehci-omap.0: irq 77, io mem 0x48064800
[ 1479.660369] ehci-omap ehci-omap.0: USB 2.0 started, EHCI 1.00
[ 1479.660461] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 1479.660461] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1479.660491] usb usb1: Product: OMAP-EHCI Host Controller
[ 1479.660491] usb usb1: Manufacturer: Linux 3.2.39 ehci_hcd
[ 1479.660491] usb usb1: SerialNumber: ehci-omap.0
[ 1479.662567] hub 1-0:1.0: USB hub found
[ 1479.662597] hub 1-0:1.0: 3 ports detected
[ 1479.988494] usb 1-2: new high-speed USB device number 2 using ehci-omap
[ 1480.147338] usb 1-2: New USB device found, idVendor=0bda, idProduct=8176
[ 1480.147338] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 1480.147338] usb 1-2: Manufacturer: RR
[ 1480.147338] usb 1-2: SerialNumber: 00e04c000001
pandora:~$

And a lsusb Output from the Terminal:

Spoiler

pandora:~$ lsusb

Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 002: ID 0bda:8176 Realtek Semiconductor Corp.
pandora:~$

Maybe it's a bug or something , i've pluged the Dongle in and out , and shut down the Pandora OS but nothing helped to get it working .

I'm using the internal WiFi for browsing and downloading small Files , and the WiFi Dongle for larger Files or Networking with shared Folders over Gigolo,

because of the amazing download Speed of 4-5 MB/s   .

Hopefully this can be fixed .

Greeting , Shao

Edit:

For the OS Update i'd used the "Upgrade Pandora OS" from the start Menu .

The File  /etc/modprobe.conf Shows me the following text inside :

blacklist wl1251_sdio

blacklist rtl8192cu

 

[Zero3K]

My USB Wifi Dongle (which is has the rtl8192cu chipset) doesn't work anymore when I upgraded to it. Also, the charging LED didn't come one when my Pandora was turned on via an AC Adapter.

Strange, the driver is still there. What's in your /etc/modprobe.conf ?

It has the following:

blacklist wl1251_sdio
blacklist rtl8192cu
 

 

[mcobit]

Tried to remove the blacklist rtl18192cu line and rebooted?

 

[urjaman]

That is the same modprobe.conf as pre-1.54RC (I have not tested this yet, just noting).