Release Pandora Image Viewer

[Hồng Thất Công]

Yes, the image shows correctly on the Pandora screen.  It's just the TV-Out is messed up.  Here's the dmesg (looks like it's what you suspected):

Spoiler

shenmue1:~$ dmesg
[    0.000000] Linux version 3.2.52 (notaz@pixelinis) (gcc version 4.5.2 (Sourcery G++ Lite 2011.03-41) ) #935 Sun Nov 3 02:24:45 EET 2013
[    0.000000] CPU: ARMv7 Processor [413fc082] revision 2 (ARMv7), cr=10c5387d
[    0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[    0.000000] Machine: Pandora Handheld Console
[    0.000000] cma: CMA: reserved 4 MiB at 86000000
[    0.000000] Initialized persistent memory from 80fe0000-80ffffff
[    0.000000] cma: CMA: reserved 64 MiB at 9c000000
[    0.000000] Memory policy: ECC disabled, Data cache writeback
[    0.000000] On node 0 totalpages: 131072
[    0.000000] free_area_init_node: node 0, pgdat c05b6a04, node_mem_map c05e9000
[    0.000000]   Normal zone: 1024 pages used for memmap
[    0.000000]   Normal zone: 0 pages reserved
[    0.000000]   Normal zone: 130048 pages, LIFO batch:31
[    0.000000] OMAP3630 ES1.2 (l2cache iva sgx neon isp 192mhz_clk )
[    0.000000] Clocking rate (Crystal/Core/MPU): 26.0/400/600 MHz
[    0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
[    0.000000] pcpu-alloc: [0] 0
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 130048
[    0.000000] Kernel command line: ubi.mtd=4 ubi.mtd=3 root=ubi0:rootfs rootfstype=ubifs rw rootflags=bulk_read vram=6272K omapfb.vram=0:3000K mmc_core.removable=0 quiet
[    0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
[    0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.000000] Memory: 512MB = 512MB total
[    0.000000] Memory: 443804k/443804k available, 80484k reserved, 0K highmem
[    0.000000] Virtual kernel memory layout:
[    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
[    0.000000]     fixmap  : 0xfff00000 - 0xfffe0000   ( 896 kB)
[    0.000000]     vmalloc : 0xe0800000 - 0xff000000   ( 488 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xe0000000   ( 512 MB)
[    0.000000]     modules : 0xbf000000 - 0xc0000000   (  16 MB)
[    0.000000]       .text : 0xc0008000 - 0xc0547ac8   (5375 kB)
[    0.000000]       .init : 0xc0548000 - 0xc057a000   ( 200 kB)
[    0.000000]       .data : 0xc057a000 - 0xc05b7180   ( 245 kB)
[    0.000000]        .bss : 0xc05b71a4 - 0xc05e8460   ( 197 kB)
[    0.000000] SLUB: Genslabs=11, HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[    0.000000] NR_IRQS:410
[    0.000000] IRQ: Found an INTC at 0xfa200000 (revision 4.0) with 96 interrupts
[    0.000000] Total of 96 interrupts on 1 active controller
[    0.000000] OMAP clockevent source: GPTIMER1 at 32768 Hz
[    0.000000] sched_clock: 32 bits at 32kHz, resolution 30517ns, wraps every 131071999ms
[    0.000000] Console: colour dummy device 80x30
[    0.000000] console [tty0] enabled
[    0.000183] Calibrating delay loop... 597.64 BogoMIPS (lpj=2334720)
[    0.039123] pid_max: default: 32768 minimum: 301
[    0.039367] Mount-cache hash table entries: 512
[    0.039764] Initializing cgroup subsys devices
[    0.039825] CPU: Testing write buffer coherency: ok
[    0.040039] hw perfevents: enabled with ARMv7 Cortex-A8 PMU driver, 5 counters available
[    0.040130] Setting up static identity map for 0x803e9ee8 - 0x803e9f40
[    0.040740] devtmpfs: initialized
[    0.060699] print_constraints: dummy:
[    0.064819] NET: Registered protocol family 16
[    0.066650] DMA: preallocated 256 KiB pool for atomic coherent allocations
[    0.067077] GPMC revision 5.0
[    0.070159] OMAP GPIO hardware version 2.5
[    0.073455] omap_mux_init: Add partition: #1: core, flags: 0
[    0.080322] Reprogramming SDRC clock to 400000000 Hz
[    0.082580] hw-breakpoint: debug architecture 0x4 unsupported.
[    0.089599]  omap-mcbsp.2: alias fck already exists
[    0.089935]  omap-mcbsp.3: alias fck already exists
[    0.091369] OMAP DMA hardware revision 5.0
[    0.106506] bio: create slab <bio-0> at 0
[    0.107666] print_constraints: vwlan: 1800 mV
[    0.109191] SCSI subsystem initialized
[    0.111572] usbcore: registered new interface driver usbfs
[    0.111816] usbcore: registered new interface driver hub
[    0.112060] usbcore: registered new device driver usb
[    0.125122] omap_i2c omap_i2c.1: bus 1 rev1.4.0 at 2600 kHz
[    0.128265] twl4030: PIH (irq 7) chaining IRQs 368..375
[    0.128356] twl4030: power (irq 373) chaining IRQs 376..383
[    0.128906] twl4030: gpio (irq 368) chaining IRQs 384..401
[    0.129333] _omap_mux_init_gpio: Could not set gpio192
[    0.130432] _omap_mux_init_gpio: Could not set gpio193
[    0.133056] print_constraints: VUSB1V5: 1500 mV normal standby
[    0.133666] print_constraints: VUSB1V8: 1800 mV normal standby
[    0.134307] print_constraints: VUSB3V1: 3100 mV normal standby
[    0.195434] twl4030_usb twl4030_usb: Initialized TWL4030 USB module
[    0.196746] print_constraints: vdd_mpu_iva: 600 <--> 1450 mV normal
[    0.197357] print_constraints: vdd_core: 600 <--> 1450 mV normal
[    0.198059] print_constraints: VMMC1: 1850 <--> 3150 mV at 3150 mV normal standby
[    0.198730] print_constraints: VDAC: 1800 mV normal standby
[    0.199401] print_constraints: VAUX2: 1800 mV normal standby
[    0.200073] print_constraints: VPLL2: 1800 mV normal standby
[    0.200775] print_constraints: VMMC2: 1850 <--> 3150 mV at 1850 mV normal standby
[    0.201416] print_constraints: VSIM: 2800 mV normal standby
[    0.202056] print_constraints: VAUX1: 3000 mV normal standby
[    0.202667] print_constraints: VAUX4: 3000 mV normal standby
[    0.211059] omap_i2c omap_i2c.3: bus 3 rev1.4.0 at 100 kHz
[    0.213195] omap-iommu omap-iommu.0: isp registered
[    0.213836] Advanced Linux Sound Architecture Driver Version 1.0.24.
[    0.214660] Switching to clocksource 32k_counter
[    0.236511] musb-hdrc: version 6.0, ?dma?, otg (peripheral+host)
[    0.241851] musb-hdrc: ConfigData=0xde (UTMI-8, dyn FIFOs, bulk combine, bulk split, HB-ISO Rx, HB-ISO Tx, SoftConn)
[    0.241882] musb-hdrc: MHDRC RTL version 1.800
[    0.241912] musb-hdrc: setup fifo_mode 4
[    0.241912] musb-hdrc: 28/31 max ep, 16384/16384 memory
[    0.242401] musb-hdrc musb-hdrc: USB OTG mode controller at fa0ab000 using DMA, IRQ 92
[    0.243164] NET: Registered protocol family 2
[    0.243347] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
[    0.243621] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
[    0.243988] TCP bind hash table entries: 16384 (order: 4, 65536 bytes)
[    0.244171] TCP: Hash tables configured (established 16384 bind 16384)
[    0.244201] TCP reno registered
[    0.244201] UDP hash table entries: 256 (order: 0, 4096 bytes)
[    0.244232] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[    0.244476] NET: Registered protocol family 1
[    0.244689] NetWinder Floating Point Emulator V0.97 (double precision)
[    0.250366] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    0.265686] VFS: Disk quotas dquot_6.5.2
[    0.266113] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    0.270965] msgmni has been set to 1002
[    0.272827] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[    0.272827] io scheduler noop registered
[    0.272857] io scheduler deadline registered
[    0.272888] io scheduler cfq registered (default)
[    0.287780] OMAP DSS rev 2.0
[    0.291015] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    0.293151] omap_uart.0: ttyO0 at MMIO 0x4806a000 (irq = 72) is a OMAP UART0
[    0.293609] omap_uart.1: ttyO1 at MMIO 0x4806c000 (irq = 73) is a OMAP UART1
[    0.294006] omap_uart.2: ttyO2 at MMIO 0x49020000 (irq = 74) is a OMAP UART2
[    0.294403] omap_uart.3: ttyO3 at MMIO 0x49042000 (irq = 80) is a OMAP UART3
[    0.306060] brd: module loaded
[    0.311889] loop: module loaded
[    0.312286] platform iva.0: IVA freq set to 660MHz
[    0.312347] OMAP overclocker loaded.
[    0.314544] omap2-nand driver initializing
[    0.314697] NAND device: Manufacturer ID: 0x2c, Chip ID: 0xbc (Micron NAND 512MiB 1,8V 16-bit)
[    0.315093] Creating 5 MTD partitions on "omap2-nand.0":
[    0.315124] 0x000000000000-0x000000080000 : "xloader"
[    0.315917] 0x000000080000-0x000000260000 : "uboot"
[    0.316925] 0x000000260000-0x000000280000 : "uboot-env"
[    0.317535] 0x000000280000-0x000000c80000 : "boot"
[    0.319824] 0x000000c80000-0x000020000000 : "rootfs"
[    0.406249] UBI: attaching mtd4 to ubi0
[    1.380676] UBI: scanning is finished
[    1.394805] UBI: attached mtd4 (name "rootfs", size 499 MiB) to ubi0
[    1.394836] UBI: PEB size: 131072 bytes (128 KiB), LEB size: 129024 bytes
[    1.394836] UBI: min./max. I/O unit sizes: 2048/2048, sub-page size 512
[    1.394866] UBI: VID header offset: 512 (aligned 512), data offset: 2048
[    1.394866] UBI: good PEBs: 3996, bad PEBs: 0, corrupted PEBs: 0
[    1.394866] UBI: user volume: 1, internal volumes: 1, max. volumes count: 128
[    1.394897] UBI: max/mean erase counter: 14/1, WL threshold: 4096, image sequence number: 1905894375
[    1.394927] UBI: available PEBs: 0, total reserved PEBs: 3996, PEBs reserved for bad PEB handling: 39
[    1.394958] UBI: attaching mtd3 to ubi1
[    1.395355] UBI: background thread "ubi_bgt0d" started, PID 573
[    1.415069] UBI: scanning is finished
[    1.421905] UBI: attached mtd3 (name "boot", size 10 MiB) to ubi1
[    1.421936] UBI: PEB size: 131072 bytes (128 KiB), LEB size: 129024 bytes
[    1.421936] UBI: min./max. I/O unit sizes: 2048/2048, sub-page size 512
[    1.421936] UBI: VID header offset: 512 (aligned 512), data offset: 2048
[    1.421966] UBI: good PEBs: 80, bad PEBs: 0, corrupted PEBs: 0
[    1.421966] UBI: user volume: 1, internal volumes: 1, max. volumes count: 128
[    1.421997] UBI: max/mean erase counter: 3/0, WL threshold: 4096, image sequence number: 1464726420
[    1.421997] UBI: available PEBs: 0, total reserved PEBs: 80, PEBs reserved for bad PEB handling: 2
[    1.422210] UBI: background thread "ubi_bgt1d" started, PID 578
[    1.422302] usbcore: registered new interface driver libusual
[    1.422973] mousedev: PS/2 mouse device common for all mice
[    1.423553] input: keypad as /devices/platform/omap_i2c.1/i2c-1/1-004a/twl4030_keypad/input/input0
[    1.427917] input: power-button as /devices/platform/omap_i2c.1/i2c-1/1-0049/twl4030_pwrbutton/input/input1
[    1.429168] input: nub0 as /devices/platform/omap_i2c.3/i2c-3/3-0066/input/input2
[    1.430419] input: nub1 as /devices/platform/omap_i2c.3/i2c-3/3-0067/input/input3
[    1.436431] twl_rtc twl_rtc: rtc core: registered twl_rtc as rtc0
[    1.437499] i2c /dev entries driver
[    1.441741] bq27x00-battery 3-0055: support ver. 1.2.0 enabled
[    1.465057] OMAP Watchdog Timer Rev 0x31: initial timeout 60 sec
[    1.465515] twl4030_wdt twl4030_wdt: Failed to register misc device
[    1.465576] twl4030_wdt: probe of twl4030_wdt failed with error -16
[    1.466033] voltdm_scale: No voltage scale API registered for vdd_mpu_iva
[    1.466064] platform mpu.0: omap_target: unable to scale voltage up.
[    1.466461] cpuidle: using governor ladder
[    1.466461] cpuidle: using governor menu
[    1.692474] Registered led device: pandora::sd1
[    1.692626] Registered led device: pandora::sd2
[    1.692779] Registered led device: pandora::bluetooth
[    1.692932] Registered led device: pandora::wifi
[    1.694122] Registered led device: pandora::keypad_bl
[    1.695251] Registered led device: pandora:ower
[    1.698089] Registered led device: pandora::charger
[    1.698974] usbcore: registered new interface driver usbhid
[    1.698974] usbhid: USB HID core driver
[    1.699096] persistent_ram: found existing buffer, size 1508, start 1508
[    1.703521] console [ram-1] enabled
[    1.705261] OMAP3 Pandora SoC init
[    1.790924] asoc: twl4030-hifi <-> omap-mcbsp-dai.1 mapping ok
[    1.791992] asoc: twl4030-hifi <-> omap-mcbsp-dai.3 mapping ok
[    1.793731] ALSA device list:
[    1.793731]   #0: omap3pandora
[    1.793884] TCP cubic registered
[    1.793884] NET: Registered protocol family 17
[    1.793914] NET: Registered protocol family 15
[    1.793945] Registering the dns_resolver key type
[    1.793975] VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 3
[    1.794006] ThumbEE CPU extension supported.
[    1.794036] Registering SWP/SWPB emulation handler
[    1.799377] clock: disabling unused clocks to save power
[    1.800292] registered taskstats version 1
[    1.810577] Console: switching to colour frame buffer device 100x30
[    1.992767] input: gpio-keys as /devices/platform/gpio-keys/input/input4
[    1.993988] twl_rtc twl_rtc: setting system clock to 2013-12-09 15:54:25 UTC (1386604465)
[    1.995300] UBIFS: background thread "ubifs_bgt0_0" started, PID 674
[    2.069000] UBIFS: mounted UBI device 0, volume 0, name "rootfs"(null)
[    2.069030] UBIFS: LEB size: 129024 bytes (126 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
[    2.069030] UBIFS: FS size: 508612608 bytes (485 MiB, 3942 LEBs), journal size 9033728 bytes (8 MiB, 71 LEBs)
[    2.069030] UBIFS: reserved for root: 0 bytes (0 KiB)
[    2.069061] UBIFS: media format: w4/r0 (latest is w4/r0), UUID F1E94A2E-C008-4498-9283-56EF7DF72DC0, small LPT model
[    2.071319] VFS: Mounted root (ubifs filesystem) on device 0:14.
[    2.073303] devtmpfs: mounted
[    2.073516] Freeing init memory: 200K
[    2.327789] mmc0: host does not support reading read-only switch. assuming write-enable.
[    2.329803] mmc0: new high speed SDXC card at address b368
[    2.335235] mmcblk0: mmc0:b368 SD64G 59.6 GiB
[    2.336791]  mmcblk0: p1
[    2.438537] mmc2: card claims to support voltages below the defined range. These will be ignored.
[    2.439697] mmc2: new SDIO card at address 0001
[    2.800476] udevd (729): /proc/729/oom_adj is deprecated, please use /proc/729/oom_score_adj instead.
[    4.871307] ads7846 spi1.0: touchscreen, irq 254
[    4.871948] input: touchscreen as /devices/platform/omap2_mcspi.1/spi_master/spi1/spi1.0/input/input5
[    5.073944] FAT-fs (mmcblk0): invalid media value (0x00)
[    5.074035] FAT-fs (mmcblk0): Can't find a valid FAT filesystem
[    5.233367] FAT-fs (mmcblk0): invalid media value (0x00)
[    5.233459] FAT-fs (mmcblk0): Can't find a valid FAT filesystem
[    5.473968] EXT4-fs (mmcblk0p1): Unrecognized mount option "umask=0" or missing value
[    5.509826] EXT4-fs (mmcblk0p1): warning: mounting fs with errors, running e2fsck is recommended
[    5.531158] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null)
[    5.580108] alignment: ignoring faults is unsafe on this CPU.  Defaulting to fixup mode.
[    5.782806] fuse init (API version 7.17)
[    5.877716] NET: Registered protocol family 10
[    5.992523] zram: module is from the staging directory, the quality is unknown, you have been warned.
[    5.994049] zram: num_devices not specified. Using default: 1
[    5.994049] zram: Creating 1 devices ...
[    6.122558] UBIFS: background thread "ubifs_bgt1_0" started, PID 1348
[    6.186676] UBIFS: mounted UBI device 1, volume 0, name "boot"(null)
[    6.186676] UBIFS: LEB size: 129024 bytes (126 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
[    6.186706] UBIFS: FS size: 8386560 bytes (7 MiB, 65 LEBs), journal size 1032193 bytes (0 MiB, 6 LEBs)
[    6.186706] UBIFS: reserved for root: 396117 bytes (386 KiB)
[    6.186737] UBIFS: media format: w4/r0 (latest is w4/r0), UUID C26FACB6-DF94-48B6-8502-44BD96BD2C56, small LPT model
[    6.375244] zram: disk size not provided. You can use disksize_kb module param to specify size.
[    6.375244] Using default: (25% of RAM).
[    6.375610] FAT-fs (zram0): bogus number of reserved sectors
[    6.375762] FAT-fs (zram0): Can't find a valid FAT filesystem
[    6.383422] Buffer I/O error on device zram0, logical block 32101
[    6.383544] Buffer I/O error on device zram0, logical block 32101
[    6.383697] Buffer I/O error on device zram0, logical block 32101
[    6.383789] Buffer I/O error on device zram0, logical block 32101
[    6.383911] Buffer I/O error on device zram0, logical block 32101
[    6.384002] Buffer I/O error on device zram0, logical block 32101
[    6.384155] Buffer I/O error on device zram0, logical block 32101
[    6.384338] Buffer I/O error on device zram0, logical block 32101
[    6.384490] Buffer I/O error on device zram0, logical block 32101
[    6.384643] Buffer I/O error on device zram0, logical block 32101
[    8.485076] platform mpu.0: max MPU OPP set to 4
[    8.694305] input: nub0 as /devices/platform/omap_i2c.3/i2c-3/3-0066/input/input6
[    8.744720] input: nub1 as /devices/platform/omap_i2c.3/i2c-3/3-0067/input/input7
[    8.812347] Adding 128404k swap on /dev/zram0.  Priority:5 extents:1 across:128404k SS
[    9.478515] SGX clock rate: 200000000
[   10.277130]  gadget: using random self ethernet address
[   10.277160]  gadget: using random host ethernet address
[   10.280090] usb0: MAC 42:1a:2e:ce:42:79
[   10.280090] usb0: HOST MAC 8e:2c:3b:ee:47:4b
[   10.293060]  gadget: CDC Composite Gadget, version: King Kamehameha Day 2008
[   10.293090]  gadget: g_cdc ready
[   10.306762] musb-hdrc musb-hdrc: MUSB HDRC host driver
[   10.306854] musb-hdrc musb-hdrc: new USB bus registered, assigned bus number 1
[   10.306976] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[   10.306976] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[   10.306976] usb usb1: Product: MUSB HDRC host driver
[   10.307006] usb usb1: Manufacturer: Linux 3.2.52 musb-hcd
[   10.307006] usb usb1: SerialNumber: musb-hdrc
[   10.308929] hub 1-0:1.0: USB hub found
[   10.308959] hub 1-0:1.0: 1 port detected
[   10.642883] cfg80211: Calling CRDA to update world regulatory domain
[   10.870391] wl1251: using dedicated interrupt line
[   10.957336] ieee80211 phy0: Selected rate control algorithm 'pid'
[   10.957885] wl1251: loaded
[   10.958190] wl1251: initialized
[   12.121124] wl1251: 154 tx blocks at 0x3b788, 35 rx blocks at 0x3a780
[   12.121215] wl1251: firmware booted (Rev 6.0.4.235)
[   12.200164] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[  143.785125] omapfb omapfb: setup_plane failed
[  156.360443] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[  156.523498] aufs 3.2-20120109
[  156.540679] aufs test_add:261:mount[2995]: uid/gid/perm /mnt/pnd/piv 1000/0/0755, 0/0/0777
[  159.904510] EXT4-fs error (device mmcblk0p1): ext4_mb_generate_buddy:739: group 418, 3589 clusters in bitmap, 3591 in gd
[  160.287261] input: nub0 as /devices/platform/omap_i2c.3/i2c-3/3-0066/input/input8
[  160.295440] input: nub1 as /devices/platform/omap_i2c.3/i2c-3/3-0067/input/input9
[  160.780303] omapfb omapfb: setup_plane failed
[  161.208831] omapfb omapfb: setup_plane failed
[  161.567565] EXT4-fs error (device mmcblk0p1): ext4_mb_generate_buddy:739: group 29, 5885 clusters in bitmap, 6024 in gd
[  167.875640] omapfb omapfb: setup_plane failed
[  170.352325] omapfb omapfb: setup_plane failed
[  171.543273] omapfb omapfb: setup_plane failed
[  172.934448] omapfb omapfb: setup_plane failed
[  174.759368] omapfb omapfb: setup_plane failed
[  175.683258] omapfb omapfb: setup_plane failed
[  176.640655] omapfb omapfb: setup_plane failed
[  177.698150] omapfb omapfb: setup_plane failed
[  180.390747] omapfb omapfb: setup_plane failed
[  183.333465] omapfb omapfb: setup_plane failed
[  185.208587] omapfb omapfb: setup_plane failed
[  186.516357] omapfb omapfb: setup_plane failed
[  187.273468] omapfb omapfb: setup_plane failed
[  188.514312] omapfb omapfb: setup_plane failed
[  190.506134] omapfb omapfb: setup_plane failed
[  191.913879] omapfb omapfb: setup_plane failed
[  192.637725] omapfb omapfb: setup_plane failed
[  193.695281] omapfb omapfb: setup_plane failed
[  195.753753] omapfb omapfb: setup_plane failed
[  196.644439] omapfb omapfb: setup_plane failed
[  197.701843] omapfb omapfb: setup_plane failed
[  200.711364] omapfb omapfb: setup_plane failed
[  201.583251] omapdss DISPC error: SYNC_LOST on channel tv, restarting the output with video overlays disabled
[  201.735046] omapfb omapfb: setup_plane failed
[  201.763031] omapdss DISPC error: SYNC_LOST on channel tv, restarting the output with video overlays disabled
[  201.988311] omapdss DISPC error: SYNC_LOST on channel tv, restarting the output with video overlays disabled
[  205.510498] omapdss DISPC error: FIFO UNDERFLOW on vid2, disabling the overlay
[  205.575500] omapdss DISPC error: FIFO UNDERFLOW on vid2, disabling the overlay
[  205.625701] omapdss DISPC error: SYNC_LOST on channel tv, restarting the output with video overlays disabled
[  205.751098] omapfb omapfb: setup_plane failed
[  205.808624] omapdss DISPC error: FIFO UNDERFLOW on vid2, disabling the overlay
[  205.858703] omapdss DISPC error: SYNC_LOST on channel tv, restarting the output with video overlays disabled
[  207.288787] omapdss DISPC error: FIFO UNDERFLOW on vid2, disabling the overlay
[  207.338836] omapdss DISPC error: SYNC_LOST on channel tv, restarting the output with video overlays disabled
[  207.467773] omapfb omapfb: setup_plane failed
[  207.527374] omapdss DISPC error: FIFO UNDERFLOW on vid2, disabling the overlay
[  207.577362] omapdss DISPC error: SYNC_LOST on channel tv, restarting the output with video overlays disabled
[  208.204742] omapdss DISPC error: FIFO UNDERFLOW on vid2, disabling the overlay
[  208.257507] omapdss DISPC error: SYNC_LOST on channel tv, restarting the output with video overlays disabled
[  208.403228] omapfb omapfb: setup_plane failed
[  208.541076] omapdss DISPC error: FIFO UNDERFLOW on vid2, disabling the overlay
[  208.600280] omapdss DISPC error: SYNC_LOST on channel tv, restarting the output with video overlays disabled
[  210.143402] omapdss DISPC error: FIFO UNDERFLOW on vid2, disabling the overlay
[  210.195831] omapdss DISPC error: SYNC_LOST on channel tv, restarting the output with video overlays disabled
[  213.738769] omapdss DISPC error: FIFO UNDERFLOW on vid2, disabling the overlay
[  213.790863] omapdss DISPC error: SYNC_LOST on channel tv, restarting the output with video overlays disabled
[  213.935455] omapfb omapfb: setup_plane failed
[  214.076629] omapdss DISPC error: FIFO UNDERFLOW on vid2, disabling the overlay
[  214.146667] omapdss DISPC error: SYNC_LOST on channel tv, restarting the output with video overlays disabled
[  215.628692] omapdss DISPC error: FIFO UNDERFLOW on vid2, disabling the overlay
[  215.681701] omapdss DISPC error: SYNC_LOST on channel tv, restarting the output with video overlays disabled
[  215.858856] omapfb omapfb: setup_plane failed
[  215.894439] omapdss DISPC error: FIFO UNDERFLOW on vid2, disabling the overlay
[  216.295043] omapdss DISPC error: FIFO UNDERFLOW on vid2, disabling the overlay
[  216.347076] omapdss DISPC error: SYNC_LOST on channel tv, restarting the output with video overlays disabled
[  216.501281] omapfb omapfb: setup_plane failed
[  216.639373] omapdss DISPC error: FIFO UNDERFLOW on vid2, disabling the overlay
[  216.708618] omapdss DISPC error: SYNC_LOST on channel tv, restarting the output with video overlays disabled
[  217.073730] omapdss DISPC error: FIFO UNDERFLOW on vid2, disabling the overlay
[  217.125518] omapdss DISPC error: SYNC_LOST on channel tv, restarting the output with video overlays disabled
[  217.268280] omapfb omapfb: setup_plane failed
[  217.410430] omapdss DISPC error: FIFO UNDERFLOW on vid2, disabling the overlay
[  217.478027] omapdss DISPC error: SYNC_LOST on channel tv, restarting the output with video overlays disabled
[  217.878051] omapdss DISPC error: FIFO UNDERFLOW on vid2, disabling the overlay
[  217.930419] omapdss DISPC error: SYNC_LOST on channel tv, restarting the output with video overlays disabled
[  218.083953] omapfb omapfb: setup_plane failed
[  218.226104] omapdss DISPC error: FIFO UNDERFLOW on vid2, disabling the overlay
[  218.304107] omapdss DISPC error: SYNC_LOST on channel tv, restarting the output with video overlays disabled
[  218.810607] omapdss DISPC error: FIFO UNDERFLOW on vid2, disabling the overlay
[  218.863220] omapdss DISPC error: SYNC_LOST on channel tv, restarting the output with video overlays disabled
[  219.545989] omapdss DISPC error: FIFO UNDERFLOW on vid2, disabling the overlay
[  219.598022] omapdss DISPC error: SYNC_LOST on channel tv, restarting the output with video overlays disabled
[  219.750946] omapfb omapfb: setup_plane failed
[  219.889190] omapdss DISPC error: FIFO UNDERFLOW on vid2, disabling the overlay
[  219.956024] omapdss DISPC error: SYNC_LOST on channel tv, restarting the output with video overlays disabled
[  220.323516] omapdss DISPC error: FIFO UNDERFLOW on vid2, disabling the overlay
[  220.376037] omapdss DISPC error: SYNC_LOST on channel tv, restarting the output with video overlays disabled
[  220.518310] omapfb omapfb: setup_plane failed
[  220.660949] omapdss DISPC error: FIFO UNDERFLOW on vid2, disabling the overlay
[  220.711120] omapdss DISPC error: SYNC_LOST on channel tv, restarting the output with video overlays disabled
[  223.481079] omapdss DISPC error: FIFO UNDERFLOW on vid2, disabling the overlay
[  223.581481] omapdss DISPC error: SYNC_LOST on channel tv, restarting the output with video overlays disabled
[  223.758636] input: nub0 as /devices/platform/omap_i2c.3/i2c-3/3-0066/input/input10
[  223.764648] input: nub1 as /devices/platform/omap_i2c.3/i2c-3/3-0067/input/input11
[  224.084625] omapdss DISPC error: FIFO UNDERFLOW on vid2, disabling the overlay
[  224.134735] omapdss DISPC error: SYNC_LOST on channel tv, restarting the output with video overlays disabled
[  224.389984] omapdss DISPC error: SYNC_LOST on channel tv, restarting the output with video overlays disabled
[  230.063140] omapdss DISPC error: FIFO UNDERFLOW on vid2, disabling the overlay
[  230.273620] omapdss DISPC error: SYNC_LOST on channel tv, restarting the output with video overlays disabled
[  236.168273] omapdss DISPC error: SYNC_LOST on channel lcd, restarting the output with video overlays disabled
[  241.248748] omapdss DISPC error: FIFO UNDERFLOW on vid2, disabling the overlay
[  249.465850] omapdss DISPC error: SYNC_LOST on channel lcd, restarting the output with video overlays disabled
shenmue1:~$

 

[_wb_]

Not much I can do about that, except to avoid the problem by adding a "tv out mode" that has a lower max resolution in order to keep omapdss happy.

Maybe notaz can do something to solve the actual problem? That is, if it can be solved.

 

[Hồng Thất Công]

OK Thanks.  No big deal.

 

[_wb_]

PIV is featured on PandoraLive! Thanks for the nice article, ekianjo!

http://pandoralive.info/?p=2249

 

[PowerGod]

I have one folder full of pictures, and a SUBfolder in it full of thumbnails, and I wasn't able to see the pictures from PIV !! It was always opening the subfolder with thumbnails...

Is there a workaround for this ?

When I open PIV I press OK in the main folder, but seems like the subfolder is automatically selected

 

[_wb_]

You're selecting a folder, so maybe go one level up and make sure the folder you want to view is highlighted (without going into it).

 

[PowerGod]

The problem is that the subfolder is already highlighted when the I enter the main folder, and all the pictures are not selectable, so how can I "deselect" the subfolder ?

EDIT: Found out, CTRL+Click deselected it

 

[PowerGod]

Is there a size limit for pictures ? I have a segmentation fault with 6/8 MB images

EDIT: run_vp line 31

EDIT: I just can't understand what's the problem with that time function... I'm fiddling with the pictures and the script to find the cause

EDIT: if I comment that line, I always got a "No files selected" in the logs, and no errors...

EDIT: even opening one of those images directly from thunar doesn open it and gives that segmentation fault

EDIT: excluded all the others possibilities, file names and all, it's the image itself that crashes the viewer

 

[_wb_]

Is there a size limit for pictures ? I have a segmentation fault with 6/8 MB images


EDIT: run_vp line 31


EDIT: I just can't understand what's the problem with that time function... I'm fiddling with the pictures and the script to find the cause


EDIT: if I comment that line, I always got a "No files selected" in the logs, and no errors...


EDIT: even opening one of those images directly from thunar doesn open it and gives that segmentation fault


EDIT: excluded all the others possibilities, file names and all, it's the image itself that crashes the viewer

What kind of image is it? Format? Resolution? There is no size limit, and I've opened much bigger images without problems.

Can you send me the image?

 

[PowerGod]

Here one of the images, I have an entire collection and no one is opening, I opened with The Gimp but except for the fact that's a big image I didn't see strange values

 

[_wb_]

That's a weird JPEG, it seems to have transparency?

Anyway, I can reproduce the bug, so I hope I can find out how to fix it...

 

[_wb_]

OK, turned out it is a JPEG file that uses not the usual 3-channel RGB, but it uses a 4-channel CMYK color space. I never encountered such exotic JPEG files before, but it seems it is legit . My viewer on my laptop for some reason displayed it as if it had an alpha channel (the black areas were transparent), probably because it got confused too.

I cannot find a way to fast-load such CMYK jpeg files, but instead of just crashing, I'll make sure that it gets loaded through the fall-back method of converting it with ImageMagick. Will work in the next update! I hope that also fixes Tenka's personalized porn crashes

 

[PowerGod]

Good The Gimp show them as RGB... maybe it convert the colors too

 

[Ellorion]

The viewer locks the device (no more inputs possible) when the viewer is open, a picture is loaded, you close the lid (pandora goes into standby mode) and you wake it up.

 

[commander-beef]

Just for record. Ive made some tests few weeks ago with piv and it seems to hang on my unit when i use "not so well" compressed jpegs [8MB / 10MB].

EDIT
 

 

[ingoreis]

Is any chance for Animated Gif support in next Versions?

 

[Ellorion]

Also: when you skip through alot of pictures, the app will crash (just restarts or current pic will still be visible, open folder dialog opens in the background of the picture (picturebox not visible anymore, just the picture [no more borders or "window" around the picture]))

 

[commander-beef]

Is any chance for Animated Gif support in next Versions?

Yeah, apart of these issues i address, Animated GIF support would be excellent..

 

[_wb_]

Just for record. Ive made some tests few weeks ago with piv and it seems to hang on my unit when i use "not so well" compressed jpegs [8MB / 10MB].

EDIT

Is there a specific test image you can send me on which it crashes? I've opened 90 MB jpeg files without problems, so size alone is not the issue.

The viewer locks the device (no more inputs possible) when the viewer is open, a picture is loaded, you close the lid (pandora goes into standby mode) and you wake it up.

Do you make your Pandora go to suspend-to-ram on lid close? I never use that feature, so I haven't tested it. I'll see if I can reproduce this.

Also: when you skip through alot of pictures, the app will crash (just restarts or current pic will still be visible, open folder dialog opens in the background of the picture (picturebox not visible anymore, just the picture [no more borders or "window" around the picture]))

Could you send me a pnd.out (it's in /tmp) when this happens?

Is any chance for Animated Gif support in next Versions?

This is low on my priority list. It's a lot of work, because all my code works on the assumption of one image per file and only having to draw on input. If I add animated gifs, I can almost just as well add video formats.

In any project, you need some kind of focus. The focus of PIV is viewing photos (e.g. directly from your camera's SD card), sorting them out, rotating and crop, scaling down, making a web gallery. I.e. the entire workflow from an SD card full of holiday pictures to something ready to upload or archive. I hope you understand now why animated gifs are not an urgent priority in this project

The next things I'll probably do with PIV are getting rid of those bugs that were reported, and maybe thumbnails. If and when I find time for it.

 

[_jr_]

The viewer locks the device (no more inputs possible) when the viewer is open, a picture is loaded, you close the lid (pandora goes into standby mode) and you wake it up.

Do you make your Pandora go to suspend-to-ram on lid close? I never use that feature, so I haven't tested it. I'll see if I can reproduce this.

Might not be the same cause, but I've seen similar symptoms in various applications with non-default sgx video drivers; both with just 'blank display' and 'low power mode' on display close. Sometimes it is recovering after some time, but often I haven't waited long enough and force-rebooted.