Release Emu EX Plus Alpha ported to the Pandora

[levi]

I have to admit, I've never used the Ex Plus version of the GBC emulator, as we're relatively flooded by good GBC emulators on the Pandora, so as far as I'm concerned your error report is likely to be good.

Have you checked the /tmp/pndrun.out logs?  They can often be enlightening if the program itself logs anything, and might be more directly useful to the dev.

Regarding the way your machine becomes unresponsive after exiting, is that just the nubs, or does the pandora button, e.g. not do anything after exiting?  It used to be common for after a program crash the nubs to be wrongly configured, so you needed to go back and reset them using the nub configurator in settings.

If I get chance later, I will see if I can reproduce these issues.

 

[ptitSeb]

@joshua: looks like a SGX Driver bug.

Is it a CC Pandora model ?

In any case, can you try with latest SGX version driver and see if it works better.

 

[levi]

Yes, according to the report on the last page it's a CC unit.  AFAIK there is no updated driver that works well on CC units, if I'm reading notaz's instructions from 2013 properly.

 

[ptitSeb]

Yes, according to the report on the last page it's a CC unit.  AFAIK there is no updated driver that works well on CC units, if I'm reading notaz's instructions from 2013 properly.

Yes, but I have notice most GLES|2 software / game (there are few in fact) works better with the 4.04 than with the other ones on the CC, so it's worth a try.

 

[joshua]

Good questions, thank you for suggesting things to check.  I am using a CC with the 4.00.00.01_default driver.  I tried some others using "SGX driver installer r2" -- more on that later.

To clarify how it becomes unresponsive when subsequently launching the emulator:

After the problem occurs, when I want to exit the application I press the BACKSPACE key, which normally displays the exit confirmation menu.  The game pauses, but nothing displays -- I press ENTER a couple of times without any change.  Pressing the pandora button produces no results, but holding it causes the desktop to display and the application is no longer running.

This is the output of pndrun_GBCemu.out after that happens:

Spoiler

=======================================================================================

PND : /media/sdl/pandora/menu/GBCemu_ptitseb.pnd
PND_FSTYPE : Squashfs
APPDATADIR : /media/sdl/pandora/appdata/GBCemu
APPDD_FSTYPE : vfat
PND_CPUSPEED :
EXENAME : runscript.sh
ARGUMENTS :
=======================================================================================
[ START ]--- Mount the PND ----------
Mounting : mount -t squashfs -o ro "/dev/loop0" "/mnt/utmp/GBCemu"
Mounting the Union FS : mount -t aufs -o exec,noplink,dirs="/media/sdl/pandora/appdata/GBCemu=rw+nolwh":"/mnt/pnd/GBCemu=rr" none "/mnt/utmp/GBCemu"
[sUCCESS]--- Mount the PND ----------
[ START ]--- Starting the application ( runscript.sh ) ----------
--------------------------------------------------------------
Setting PATH to /mnt/utmp/GBCemu:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/bin/X11:/usr/games
--------------------------------------------------------------
Setting LD_LIBRARY_PATH to /mnt/utmp/GBCemu/lib:/lib:/usr/lib
changing dir to: /dev/input
changing dir to: /mnt/utmp/GBCemu
changing dir to: /media/sdl/pandora/ROMs
changing dir to: /mnt/utmp/GBCemu
changing dir to: /media/sdl/pandora/ROMs
changing dir to: /media/sdl/pandora/ROMs
ALSA lib pcm.c:7843snd_pcm_recover) underrun occurred
ALSA lib pcm.c:7843snd_pcm_recover) underrun occurred
ALSA lib pcm.c:7843snd_pcm_recover) underrun occurred
ALSA lib pcm.c:7843snd_pcm_recover) underrun occurred
ALSA lib pcm.c:7843snd_pcm_recover) underrun occurred
ALSA lib pcm.c:7843snd_pcm_recover) underrun occurred
ALSA lib pcm.c:7843snd_pcm_recover) underrun occurred
./runscript.sh: line 50: 2115 Terminated ./gbcemu $@
[sUCCESS]--- Starting the application ( runscript.sh ) ----------
[ START ]--- Restoring the frame buffer status ----------
[sUCCESS]--- Restoring the frame buffer status ----------
[ START ]--- Restoring nub mode ----------
[sUCCESS]--- Restoring nub mode ----------
[ START ]--- uMount the PND ----------
[ START ]--- Waiting the Union to be available ----------
[sUCCESS]--- Waiting the Union to be available ----------
rmdir: failed to remove `/mnt/utmp/GBCemu': Device or resource busy
[ START ]--- Waiting the PND mount dir to be free ----------
[sUCCESS]--- Waiting the PND mount dir to be free ----------
cleanup done
[sUCCESS]--- uMount the PND ----------
=======================================================================================
Return code is : 1

If I launch the application again, the desktop remains on the screen.  The nubs do not respond.  Press or holding the pandora button produces no results.  I restart the device.

I tried the 4.04.00.01, .02, and .03 drivers with the same results from each:

A black screen displays after launching the application.  If I press the directional pad then the screen alternates with each press between a black display, the EX Plus Alpha menu, and the desktop.  Interestingly, the first time I tested the driver I did not reboot and it alternated between the retroarch menu (last application I had used), the EX Plus Alpha menu, and the desktop with each key press.  After that occurred I rebooted when testing each driver.

This is the output of dmesg under 4.04.00.03_1.6.16.4117:

Spoiler

[ 56.489501] squashfs: version 4.0 (2009/01/31) Phillip Lougher

[ 56.738800] aufs 3.2.x-20131104
[ 56.787597] aufs test_add:294:mount[1804]: uid/gid/perm /mnt/pnd/GBCemu 0/0/0755, 0/0/0777
[ 56.958618] wlan0: no IPv6 routers present
[ 58.479492] PVR_K: HWRecoveryResetSGX: SGX Hardware Recovery triggered
[ 58.479522] PVR_K: SGX debug (1.6.16.4117)
[ 58.479553] PVR_K: (P0) EUR_CR_EVENT_STATUS: 20000000
[ 58.479553] PVR_K: (P0) EUR_CR_EVENT_STATUS2: 00000000
[ 58.479583] PVR_K: (P0) EUR_CR_BIF_CTRL: 00000000
[ 58.479583] PVR_K: (P0) EUR_CR_BIF_INT_STAT: 00000000
[ 58.479614] PVR_K: (P0) EUR_CR_BIF_FAULT: 00000000
[ 58.479644] PVR_K: (P0) EUR_CR_BIF_MEM_REQ_STAT: 00000000
[ 58.479644] PVR_K: (P0) EUR_CR_CLKGATECTL: 00212120
[ 58.479675] PVR_K: (P0) EUR_CR_PDS_PC_BASE: 0030500C
[ 58.479675] PVR_K: Flip Command Complete Data 0 for display device 1:
[ 58.479705] PVR_K: SRC 0: (Not in use)
[ 58.479736] PVR_K: SGX Host control:
[ 58.479736] PVR_K: (HC-0) 0x00000001 0x00000000 0x00000000 0x00000001
[ 58.479766] PVR_K: (HC-10) 0x00000001 0x00000000 0x0000000A 0x0001B04A
[ 58.479766] PVR_K: (HC-20) 0x00000002 0x00000001 0x00000001 0x00000000
[ 58.479797] PVR_K: (HC-30) 0x00000007 0x000000B7 0xF19860A0 0x00000000
[ 58.479827] PVR_K: SGX TA/3D control:
[ 58.479827] PVR_K: (T3C-0) 0x0F003000 0x0F003120 0x0F002000 0x00000000
[ 58.479858] PVR_K: (T3C-10) 0x0F09C1C0 0x00000001 0x00000002 0x00000001
[ 58.479888] PVR_K: (T3C-20) 0x0F007F40 0x00000000 0x00000000 0x00000000
[ 58.479888] PVR_K: (T3C-30) 0x00000000 0x00000000 0x00000000 0x00000000
[ 58.479919] PVR_K: (T3C-40) 0x00000000 0x00000000 0x00000000 0x00000000
[ 58.479949] PVR_K: (T3C-50) 0x00000000 0x0F007F40 0x00000000 0x00000000
[ 58.479949] PVR_K: (T3C-60) 0x0F007F40 0x00000000 0x00000000 0x00000000
[ 58.479980] PVR_K: (T3C-70) 0x00000000 0x00000000 0x00000000 0x00000000
[ 58.480010] PVR_K: (T3C-80) 0x00000000 0x0F0BC4D4 0x00000000 0x0F000000
[ 58.480010] PVR_K: (T3C-90) 0x8AEFE000 0x0F089900 0x0F0BC4D4 0x0F0886E0
[ 58.480041] PVR_K: (T3C-A0) 0x0F007F40 0x00000000 0x0F088880 0x00000000
[ 58.480072] PVR_K: (T3C-B0) 0x00000000 0x00000002 0x00000000 0x004F3445
[ 58.480072] PVR_K: (T3C-C0) 0x00000001 0x00000000 0x00000000 0x00000000
[ 58.480102] PVR_K: (T3C-D0) 0x00000000 0x00000000 0x00000000 0x00000000
[ 58.480133] PVR_K: (T3C-E0) 0x00000001 0x00000000 0x0F000000 0x80008000
[ 58.480133] PVR_K: (T3C-F0) 0x80048000 0x0F004000 0x0F007C20 0x0F002020
[ 58.480163] PVR_K: (T3C-100) 0x0F088000 0x0F088000 0x00000000 0x00000000
[ 58.480194] PVR_K: SGX Kernel CCB WO:0x2A RO:0x2A
[ 59.490173] sched: RT throttling activated
[ 66.279449] PVR_K: HWRecoveryResetSGX: SGX Hardware Recovery triggered
[ 66.279479] PVR_K: SGX debug (1.6.16.4117)
[ 66.279510] PVR_K: (P0) EUR_CR_EVENT_STATUS: 20000000
[ 66.279510] PVR_K: (P0) EUR_CR_EVENT_STATUS2: 00000000
[ 66.279541] PVR_K: (P0) EUR_CR_BIF_CTRL: 00000000
[ 66.279571] PVR_K: (P0) EUR_CR_BIF_INT_STAT: 00000000
[ 66.279571] PVR_K: (P0) EUR_CR_BIF_FAULT: 00000000
[ 66.279602] PVR_K: (P0) EUR_CR_BIF_MEM_REQ_STAT: 00000000
[ 66.279602] PVR_K: (P0) EUR_CR_CLKGATECTL: 00212120
[ 66.279632] PVR_K: (P0) EUR_CR_PDS_PC_BASE: 00305EAC
[ 66.279663] PVR_K: Flip Command Complete Data 0 for display device 1:
[ 66.279663] PVR_K: SRC 0: (Not in use)
[ 66.279693] PVR_K: SRC 1: (Not in use)
[ 66.279693] PVR_K: SGX Host control:
[ 66.279724] PVR_K: (HC-0) 0x00000001 0x00000000 0x00000000 0x00000001
[ 66.279724] PVR_K: (HC-10) 0x00000002 0x00000000 0x0000000A 0x0001B04A
[ 66.279754] PVR_K: (HC-20) 0x00000002 0x00000001 0x00000001 0x00000000
[ 66.279785] PVR_K: (HC-30) 0x00000009 0x0000015E 0xF20F5738 0x00000000
[ 66.279785] PVR_K: SGX TA/3D control:
[ 66.279815] PVR_K: (T3C-0) 0x0F003000 0x0F003120 0x0F002000 0x00000000
[ 66.279815] PVR_K: (T3C-10) 0x00000000 0x00000001 0x00000002 0x00000001
[ 66.279846] PVR_K: (T3C-20) 0x0F007F40 0x00000000 0x00000000 0x00000000
[ 66.279876] PVR_K: (T3C-30) 0x00000000 0x00000000 0x00000000 0x00000000
[ 66.279876] PVR_K: (T3C-40) 0x00000000 0x00000000 0x00000000 0x00000000
[ 66.279907] PVR_K: (T3C-50) 0x00000000 0x0F007F40 0x00000000 0x00000000
[ 66.279937] PVR_K: (T3C-60) 0x0F007F40 0x00000000 0x00000000 0x00000000
[ 66.279937] PVR_K: (T3C-70) 0x00000000 0x00000000 0x00000000 0x00000000
[ 66.279968] PVR_K: (T3C-80) 0x00000000 0x0F0BC514 0x00000000 0x0F000000
[ 66.279998] PVR_K: (T3C-90) 0x8AEFE000 0x0F089FC0 0x0F0BC514 0x0F088880
[ 66.279998] PVR_K: (T3C-A0) 0x0F007F40 0x00000000 0x00000000 0x00000000
[ 66.280029] PVR_K: (T3C-B0) 0x00000000 0x00000002 0x00000000 0x004F4751
[ 66.280059] PVR_K: (T3C-C0) 0x00000001 0x00000000 0x00000000 0x00000000
[ 66.280059] PVR_K: (T3C-D0) 0x00000000 0x00000000 0x00000000 0x00000000
[ 66.280090] PVR_K: (T3C-E0) 0x00000002 0x00000000 0x0F000000 0x80008000
[ 66.280120] PVR_K: (T3C-F0) 0x80048000 0x0F004000 0x0F007C20 0x0F002020
[ 66.280120] PVR_K: (T3C-100) 0x0F088000 0x0F088000 0x00000000 0x00000000
[ 66.280151] PVR_K: SGX Kernel CCB WO:0x30 RO:0x30
[ 67.479370] PVR_K: HWRecoveryResetSGX: SGX Hardware Recovery triggered
[ 67.479400] PVR_K: SGX debug (1.6.16.4117)
[ 67.479431] PVR_K: (P0) EUR_CR_EVENT_STATUS: 20000000
[ 67.479431] PVR_K: (P0) EUR_CR_EVENT_STATUS2: 00000000
[ 67.479461] PVR_K: (P0) EUR_CR_BIF_CTRL: 00000000
[ 67.479461] PVR_K: (P0) EUR_CR_BIF_INT_STAT: 00000000
[ 67.479492] PVR_K: (P0) EUR_CR_BIF_FAULT: 00000000
[ 67.479492] PVR_K: (P0) EUR_CR_BIF_MEM_REQ_STAT: 00000000
[ 67.479522] PVR_K: (P0) EUR_CR_CLKGATECTL: 00212120
[ 67.479522] PVR_K: (P0) EUR_CR_PDS_PC_BASE: 003015EC
[ 67.479553] PVR_K: Flip Command Complete Data 0 for display device 1:
[ 67.479583] PVR_K: SRC 0: (Not in use)
[ 67.479583] PVR_K: SRC 1: (Not in use)
[ 67.479614] PVR_K: SGX Host control:
[ 67.479614] PVR_K: (HC-0) 0x00000001 0x00000000 0x00000000 0x00000001
[ 67.479644] PVR_K: (HC-10) 0x00000003 0x00000000 0x0000000A 0x0001B04A
[ 67.479675] PVR_K: (HC-20) 0x00000002 0x00000001 0x00000001 0x00000000
[ 67.479675] PVR_K: (HC-30) 0x0000000B 0x00000204 0xF221B2A0 0x00000000
[ 67.479705] PVR_K: SGX TA/3D control:
[ 67.479705] PVR_K: (T3C-0) 0x0F003000 0x0F003120 0x0F002000 0x00000000
[ 67.479736] PVR_K: (T3C-10) 0x00000000 0x00000001 0x00000002 0x00000001
[ 67.479766] PVR_K: (T3C-20) 0x0F007F40 0x00000000 0x00000000 0x00000000
[ 67.479766] PVR_K: (T3C-30) 0x00000000 0x00000000 0x00000000 0x00000000
[ 67.479797] PVR_K: (T3C-40) 0x00000000 0x00000000 0x00000000 0x00000000
[ 67.479827] PVR_K: (T3C-50) 0x00000000 0x0F007F40 0x00000000 0x00000000
[ 67.479827] PVR_K: (T3C-60) 0x0F007F40 0x00000000 0x00000000 0x00000000
[ 67.479858] PVR_K: (T3C-70) 0x00000000 0x00000000 0x00000000 0x00000000
[ 67.479888] PVR_K: (T3C-80) 0x00000000 0x0F0BC4D4 0x00000000 0x0F000000
[ 67.479888] PVR_K: (T3C-90) 0x8AEFE000 0x0F08A680 0x0F0BC4D4 0x0F088880
[ 67.479919] PVR_K: (T3C-A0) 0x0F007F40 0x00000000 0x00000000 0x00000000
[ 67.479949] PVR_K: (T3C-B0) 0x00000000 0x00000002 0x00000000 0x004A5A4B
[ 67.479949] PVR_K: (T3C-C0) 0x00000001 0x00000000 0x00000000 0x00000000
[ 67.479980] PVR_K: (T3C-D0) 0x00000000 0x00000000 0x00000000 0x00000000
[ 67.480010] PVR_K: (T3C-E0) 0x00000003 0x00000000 0x0F000000 0x80008000
[ 67.480010] PVR_K: (T3C-F0) 0x80048000 0x0F004000 0x0F007C20 0x0F002020
[ 67.480041] PVR_K: (T3C-100) 0x0F088000 0x0F088000 0x00000000 0x00000000
[ 67.480072] PVR_K: SGX Kernel CCB WO:0x38 RO:0x38
[ 67.645904] PVR_K: HWRecoveryResetSGX: SGX Hardware Recovery triggered
[ 67.645904] PVR_K: SGX debug (1.6.16.4117)
[ 67.645935] PVR_K: (P0) EUR_CR_EVENT_STATUS: 20000000
[ 67.645965] PVR_K: (P0) EUR_CR_EVENT_STATUS2: 00000000
[ 67.645965] PVR_K: (P0) EUR_CR_BIF_CTRL: 00000000
[ 67.645996] PVR_K: (P0) EUR_CR_BIF_INT_STAT: 00000000
[ 67.646057] PVR_K: (P0) EUR_CR_BIF_FAULT: 00000000
[ 67.646057] PVR_K: (P0) EUR_CR_BIF_MEM_REQ_STAT: 00000000
[ 67.646087] PVR_K: (P0) EUR_CR_CLKGATECTL: 00212120
[ 67.646087] PVR_K: (P0) EUR_CR_PDS_PC_BASE: 00304ACC
[ 67.646118] PVR_K: Flip Command Complete Data 0 for display device 1:
[ 67.646148] PVR_K: SRC 0: (Not in use)
[ 67.646148] PVR_K: SRC 1: (Not in use)
[ 67.646179] PVR_K: SGX Host control:
[ 67.646179] PVR_K: (HC-0) 0x00000001 0x00000000 0x00000000 0x00000001
[ 67.646209] PVR_K: (HC-10) 0x00000004 0x00000000 0x0000000A 0x0001B04A
[ 67.646240] PVR_K: (HC-20) 0x00000002 0x00000001 0x00000001 0x00000000
[ 67.646240] PVR_K: (HC-30) 0x0000000C 0x000002A9 0xF2243374 0x00000000
[ 67.646270] PVR_K: SGX TA/3D control:
[ 67.646270] PVR_K: (T3C-0) 0x0F003000 0x0F003120 0x0F002000 0x00000000
[ 67.646301] PVR_K: (T3C-10) 0x00000000 0x00000001 0x00000002 0x00000001
[ 67.646331] PVR_K: (T3C-20) 0x0F007F40 0x00000000 0x00000000 0x00000000
[ 67.646331] PVR_K: (T3C-30) 0x00000000 0x00000000 0x00000000 0x00000000
[ 67.646362] PVR_K: (T3C-40) 0x00000000 0x00000000 0x00000000 0x00000000
[ 67.646392] PVR_K: (T3C-50) 0x00000000 0x0F007F40 0x00000000 0x00000000
[ 67.646392] PVR_K: (T3C-60) 0x0F007F40 0x00000000 0x00000000 0x00000000
[ 67.646423] PVR_K: (T3C-70) 0x00000000 0x00000000 0x00000000 0x00000000
[ 67.646453] PVR_K: (T3C-80) 0x00000000 0x0F0BC514 0x00000000 0x0F000000
[ 67.646453] PVR_K: (T3C-90) 0x8AEFE000 0x0F08AD40 0x0F0BC514 0x0F0886E0
[ 67.646484] PVR_K: (T3C-A0) 0x0F007F40 0x00000000 0x00000000 0x00000000
[ 67.646514] PVR_K: (T3C-B0) 0x00000000 0x00000002 0x00000000 0x00581EDE
[ 67.646514] PVR_K: (T3C-C0) 0x00000001 0x00000000 0x00000000 0x00000000
[ 67.646545] PVR_K: (T3C-D0) 0x00000000 0x00000000 0x00000000 0x00000000
[ 67.646575] PVR_K: (T3C-E0) 0x00000004 0x00000000 0x0F000000 0x80008000
[ 67.646575] PVR_K: (T3C-F0) 0x80048000 0x0F004000 0x0F007C20 0x0F002020
[ 67.646606] PVR_K: (T3C-100) 0x0F088000 0x0F088000 0x00000000 0x00000000
[ 67.646636] PVR_K: SGX Kernel CCB WO:0x3E RO:0x3E
[ 67.812530] PVR_K: HWRecoveryResetSGX: SGX Hardware Recovery triggered
[ 67.812561] PVR_K: SGX debug (1.6.16.4117)
[ 67.812591] PVR_K: (P0) EUR_CR_EVENT_STATUS: 20000000
[ 67.812622] PVR_K: (P0) EUR_CR_EVENT_STATUS2: 00000000
[ 67.812622] PVR_K: (P0) EUR_CR_BIF_CTRL: 00000000
[ 67.812652] PVR_K: (P0) EUR_CR_BIF_INT_STAT: 00000000
[ 67.812652] PVR_K: (P0) EUR_CR_BIF_FAULT: 00000000
[ 67.812683] PVR_K: (P0) EUR_CR_BIF_MEM_REQ_STAT: 00000000
[ 67.812683] PVR_K: (P0) EUR_CR_CLKGATECTL: 00212120
[ 67.812713] PVR_K: (P0) EUR_CR_PDS_PC_BASE: 00300A34
[ 67.812744] PVR_K: Flip Command Complete Data 0 for display device 1:
[ 67.812744] PVR_K: SRC 0: (Not in use)
[ 67.812774] PVR_K: SRC 1: (Not in use)
[ 67.812774] PVR_K: SGX Host control:
[ 67.812805] PVR_K: (HC-0) 0x00000001 0x00000000 0x00000000 0x00000001
[ 67.812805] PVR_K: (HC-10) 0x00000005 0x00000000 0x0000000A 0x0001B04A
[ 67.812835] PVR_K: (HC-20) 0x00000002 0x00000001 0x00000001 0x00000000
[ 67.812866] PVR_K: (HC-30) 0x0000000D 0x0000034E 0xF226B448 0x00000000
[ 67.812866] PVR_K: SGX TA/3D control:
[ 67.812896] PVR_K: (T3C-0) 0x0F003000 0x0F003120 0x0F002000 0x00000000
[ 67.812927] PVR_K: (T3C-10) 0x00000000 0x00000001 0x00000002 0x00000001
[ 67.812927] PVR_K: (T3C-20) 0x0F007F40 0x00000000 0x00000000 0x00000000
[ 67.812957] PVR_K: (T3C-30) 0x00000000 0x00000000 0x00000000 0x00000000
[ 67.812988] PVR_K: (T3C-40) 0x00000000 0x00000000 0x00000000 0x00000000
[ 67.812988] PVR_K: (T3C-50) 0x00000000 0x0F007F40 0x00000000 0x00000000
[ 67.813018] PVR_K: (T3C-60) 0x0F007F40 0x00000000 0x00000000 0x00000000
[ 67.813049] PVR_K: (T3C-70) 0x00000000 0x00000000 0x00000000 0x00000000
[ 67.813049] PVR_K: (T3C-80) 0x00000000 0x0F0BC4D4 0x00000000 0x0F000000
[ 67.813079] PVR_K: (T3C-90) 0x8AEFE000 0x0F08B400 0x0F0BC4D4 0x0F088880
[ 67.813110] PVR_K: (T3C-A0) 0x0F007F40 0x00000000 0x00000000 0x00000000
[ 67.813110] PVR_K: (T3C-B0) 0x00000000 0x00000002 0x00000000 0x004A30C7
[ 67.813140] PVR_K: (T3C-C0) 0x00000001 0x00000000 0x00000000 0x00000000
[ 67.813171] PVR_K: (T3C-D0) 0x00000000 0x00000000 0x00000000 0x00000000
[ 67.813171] PVR_K: (T3C-E0) 0x00000005 0x00000000 0x0F000000 0x80008000
[ 67.813201] PVR_K: (T3C-F0) 0x80048000 0x0F004000 0x0F007C20 0x0F002020
[ 67.813232] PVR_K: (T3C-100) 0x0F088000 0x0F088000 0x00000000 0x00000000
[ 67.813232] PVR_K: SGX Kernel CCB WO:0x44 RO:0x44
[ 67.982727] PVR_K: HWRecoveryResetSGX: SGX Hardware Recovery triggered
[ 67.982757] PVR_K: SGX debug (1.6.16.4117)
[ 67.982788] PVR_K: (P0) EUR_CR_EVENT_STATUS: 20000000
[ 67.982788] PVR_K: (P0) EUR_CR_EVENT_STATUS2: 00000000
[ 67.982818] PVR_K: (P0) EUR_CR_BIF_CTRL: 00000000
[ 67.982818] PVR_K: (P0) EUR_CR_BIF_INT_STAT: 00000000
[ 67.982849] PVR_K: (P0) EUR_CR_BIF_FAULT: 00000000
[ 67.982849] PVR_K: (P0) EUR_CR_BIF_MEM_REQ_STAT: 00000000
[ 67.982879] PVR_K: (P0) EUR_CR_CLKGATECTL: 00212120
[ 67.982910] PVR_K: (P0) EUR_CR_PDS_PC_BASE: 0030352C
[ 67.982910] PVR_K: Flip Command Complete Data 0 for display device 1:
[ 67.982940] PVR_K: SRC 0: (Not in use)
[ 67.982940] PVR_K: SRC 1: (Not in use)
[ 67.982971] PVR_K: SGX Host control:
[ 67.982971] PVR_K: (HC-0) 0x00000001 0x00000000 0x00000000 0x00000001
[ 67.983001] PVR_K: (HC-10) 0x00000006 0x00000000 0x0000000A 0x0001B04A
[ 67.983032] PVR_K: (HC-20) 0x00000002 0x00000001 0x00000001 0x00000000
[ 67.983032] PVR_K: (HC-30) 0x0000000F 0x000003F4 0xF22953A0 0x00000000
[ 67.983062] PVR_K: SGX TA/3D control:
[ 67.983062] PVR_K: (T3C-0) 0x0F003000 0x0F003120 0x0F002000 0x00000000
[ 67.983093] PVR_K: (T3C-10) 0x00000000 0x00000001 0x00000002 0x00000001
[ 67.983123] PVR_K: (T3C-20) 0x0F007F40 0x00000000 0x00000000 0x00000000
[ 67.983123] PVR_K: (T3C-30) 0x00000000 0x00000000 0x00000000 0x00000000
[ 67.983154] PVR_K: (T3C-40) 0x00000000 0x00000000 0x00000000 0x00000000
[ 67.983184] PVR_K: (T3C-50) 0x00000000 0x0F007F40 0x00000000 0x00000000
[ 67.983184] PVR_K: (T3C-60) 0x0F007F40 0x00000000 0x00000000 0x00000000
[ 67.983215] PVR_K: (T3C-70) 0x00000000 0x00000000 0x00000000 0x00000000
[ 67.983245] PVR_K: (T3C-80) 0x00000000 0x0F0BC514 0x00000000 0x0F000000
[ 67.983245] PVR_K: (T3C-90) 0x8AEFE000 0x0F08BAC0 0x0F0BC514 0x0F0886E0
[ 67.983276] PVR_K: (T3C-A0) 0x0F007F40 0x00000000 0x00000000 0x00000000
[ 67.983306] PVR_K: (T3C-B0) 0x00000000 0x00000002 0x00000000 0x003443F2
[ 67.983306] PVR_K: (T3C-C0) 0x00000001 0x00000000 0x00000000 0x00000000
[ 67.983337] PVR_K: (T3C-D0) 0x00000000 0x00000000 0x00000000 0x00000000
[ 67.983367] PVR_K: (T3C-E0) 0x00000006 0x00000000 0x0F000000 0x80008000
[ 67.983367] PVR_K: (T3C-F0) 0x80048000 0x0F004000 0x0F007C20 0x0F002020
[ 67.983398] PVR_K: (T3C-100) 0x0F088000 0x0F088000 0x00000000 0x00000000
[ 67.983428] PVR_K: SGX Kernel CCB WO:0x49 RO:0x49
[ 74.762573] PVR_K: HWRecoveryResetSGX: SGX Hardware Recovery triggered
[ 74.762603] PVR_K: SGX debug (1.6.16.4117)
[ 74.762634] PVR_K: (P0) EUR_CR_EVENT_STATUS: 20000000
[ 74.762634] PVR_K: (P0) EUR_CR_EVENT_STATUS2: 00000000
[ 74.762664] PVR_K: (P0) EUR_CR_BIF_CTRL: 00000000
[ 74.762695] PVR_K: (P0) EUR_CR_BIF_INT_STAT: 00000000
[ 74.762695] PVR_K: (P0) EUR_CR_BIF_FAULT: 00000000
[ 74.762725] PVR_K: (P0) EUR_CR_BIF_MEM_REQ_STAT: 00000000
[ 74.762725] PVR_K: (P0) EUR_CR_CLKGATECTL: 00212120
[ 74.762756] PVR_K: (P0) EUR_CR_PDS_PC_BASE: 0030440C
[ 74.762786] PVR_K: Flip Command Complete Data 0 for display device 1:
[ 74.762786] PVR_K: SRC 0: (Not in use)
[ 74.762817] PVR_K: SRC 1: (Not in use)
[ 74.762817] PVR_K: SGX Host control:
[ 74.762847] PVR_K: (HC-0) 0x00000001 0x00000000 0x00000000 0x00000001
[ 74.762847] PVR_K: (HC-10) 0x00000007 0x00000000 0x0000000A 0x0001B04A
[ 74.762878] PVR_K: (HC-20) 0x00000002 0x00000001 0x00000001 0x00000000
[ 74.762908] PVR_K: (HC-30) 0x00000011 0x0000049B 0xF290CB30 0x00000000
[ 74.762908] PVR_K: SGX TA/3D control:
[ 74.762939] PVR_K: (T3C-0) 0x0F003000 0x0F003120 0x0F002000 0x00000000
[ 74.762939] PVR_K: (T3C-10) 0x00000000 0x00000001 0x00000002 0x00000001
[ 74.762969] PVR_K: (T3C-20) 0x0F007F40 0x00000000 0x00000000 0x00000000
[ 74.763000] PVR_K: (T3C-30) 0x00000000 0x00000000 0x00000000 0x00000000
[ 74.763000] PVR_K: (T3C-40) 0x00000000 0x00000000 0x00000000 0x00000000
[ 74.763031] PVR_K: (T3C-50) 0x00000000 0x0F007F40 0x00000000 0x00000000
[ 74.763061] PVR_K: (T3C-60) 0x0F007F40 0x00000000 0x00000000 0x00000000
[ 74.763061] PVR_K: (T3C-70) 0x00000000 0x00000000 0x00000000 0x00000000
[ 74.763092] PVR_K: (T3C-80) 0x00000000 0x0F0BC4D4 0x00000000 0x0F000000
[ 74.763122] PVR_K: (T3C-90) 0x8AEFE000 0x0F08C180 0x0F0BC4D4 0x0F088880
[ 74.763122] PVR_K: (T3C-A0) 0x0F007F40 0x00000000 0x00000000 0x00000000
[ 74.763153] PVR_K: (T3C-B0) 0x00000000 0x00000002 0x00000000 0x004F5719
[ 74.763183] PVR_K: (T3C-C0) 0x00000001 0x00000000 0x00000000 0x00000000
[ 74.763244] PVR_K: (T3C-D0) 0x00000000 0x00000000 0x00000000 0x00000000
[ 74.763244] PVR_K: (T3C-E0) 0x00000007 0x00000000 0x0F000000 0x80008000
[ 74.763275] PVR_K: (T3C-F0) 0x80048000 0x0F004000 0x0F007C20 0x0F002020
[ 74.763305] PVR_K: (T3C-100) 0x0F088000 0x0F088000 0x00000000 0x00000000
[ 74.763305] PVR_K: SGX Kernel CCB WO:0x50 RO:0x50
[ 75.962493] PVR_K: HWRecoveryResetSGX: SGX Hardware Recovery triggered
[ 75.962524] PVR_K: SGX debug (1.6.16.4117)
[ 75.962554] PVR_K: (P0) EUR_CR_EVENT_STATUS: 20000000
[ 75.962585] PVR_K: (P0) EUR_CR_EVENT_STATUS2: 00000000
[ 75.962585] PVR_K: (P0) EUR_CR_BIF_CTRL: 00000000
[ 75.962615] PVR_K: (P0) EUR_CR_BIF_INT_STAT: 00000000
[ 75.962615] PVR_K: (P0) EUR_CR_BIF_FAULT: 00000000
[ 75.962646] PVR_K: (P0) EUR_CR_BIF_MEM_REQ_STAT: 00000000
[ 75.962646] PVR_K: (P0) EUR_CR_CLKGATECTL: 00212120
[ 75.962677] PVR_K: (P0) EUR_CR_PDS_PC_BASE: 003052AC
[ 75.962707] PVR_K: Flip Command Complete Data 0 for display device 1:
[ 75.962707] PVR_K: SRC 0: (Not in use)
[ 75.962738] PVR_K: SRC 1: (Not in use)
[ 75.962738] PVR_K: SGX Host control:
[ 75.962768] PVR_K: (HC-0) 0x00000001 0x00000000 0x00000000 0x00000001
[ 75.962768] PVR_K: (HC-10) 0x00000008 0x00000000 0x0000000A 0x0001B04A
[ 75.962799] PVR_K: (HC-20) 0x00000002 0x00000001 0x00000001 0x00000000
[ 75.962829] PVR_K: (HC-30) 0x00000013 0x00000541 0xF2A30814 0x00000000
[ 75.962829] PVR_K: SGX TA/3D control:
[ 75.962860] PVR_K: (T3C-0) 0x0F003000 0x0F003120 0x0F002000 0x00000000
[ 75.962890] PVR_K: (T3C-10) 0x00000000 0x00000001 0x00000002 0x00000001
[ 75.962890] PVR_K: (T3C-20) 0x0F007F40 0x00000000 0x00000000 0x00000000
[ 75.962921] PVR_K: (T3C-30) 0x00000000 0x00000000 0x00000000 0x00000000
[ 75.962951] PVR_K: (T3C-40) 0x00000000 0x00000000 0x00000000 0x00000000
[ 75.962951] PVR_K: (T3C-50) 0x00000000 0x0F007F40 0x00000000 0x00000000
[ 75.962982] PVR_K: (T3C-60) 0x0F007F40 0x00000000 0x00000000 0x00000000
[ 75.963012] PVR_K: (T3C-70) 0x00000000 0x00000000 0x00000000 0x00000000
[ 75.963012] PVR_K: (T3C-80) 0x00000000 0x0F0BC514 0x00000000 0x0F000000
[ 75.963043] PVR_K: (T3C-90) 0x8AEFE000 0x0F08C840 0x0F0BC514 0x0F088880
[ 75.963073] PVR_K: (T3C-A0) 0x0F007F40 0x00000000 0x00000000 0x00000000
[ 75.963073] PVR_K: (T3C-B0) 0x00000000 0x00000002 0x00000000 0x004F1AB1
[ 75.963104] PVR_K: (T3C-C0) 0x00000001 0x00000000 0x00000000 0x00000000
[ 75.963134] PVR_K: (T3C-D0) 0x00000000 0x00000000 0x00000000 0x00000000
[ 75.963134] PVR_K: (T3C-E0) 0x00000008 0x00000000 0x0F000000 0x80008000
[ 75.963165] PVR_K: (T3C-F0) 0x80048000 0x0F004000 0x0F007C20 0x0F002020
[ 75.963195] PVR_K: (T3C-100) 0x0F088000 0x0F088000 0x00000000 0x00000000
[ 75.963195] PVR_K: SGX Kernel CCB WO:0x56 RO:0x56
[ 85.895355] PVR_K: HWRecoveryResetSGX: SGX Hardware Recovery triggered
[ 85.895385] PVR_K: SGX debug (1.6.16.4117)
[ 85.895416] PVR_K: (P0) EUR_CR_EVENT_STATUS: 20000000
[ 85.895416] PVR_K: (P0) EUR_CR_EVENT_STATUS2: 00000000
[ 85.895446] PVR_K: (P0) EUR_CR_BIF_CTRL: 00000000
[ 85.895477] PVR_K: (P0) EUR_CR_BIF_INT_STAT: 00000000
[ 85.895477] PVR_K: (P0) EUR_CR_BIF_FAULT: 00000000
[ 85.895507] PVR_K: (P0) EUR_CR_BIF_MEM_REQ_STAT: 00000000
[ 85.895507] PVR_K: (P0) EUR_CR_CLKGATECTL: 00212120
[ 85.895538] PVR_K: (P0) EUR_CR_PDS_PC_BASE: 0030614C
[ 85.895568] PVR_K: Flip Command Complete Data 0 for display device 1:
[ 85.895568] PVR_K: SRC 0: (Not in use)
[ 85.895599] PVR_K: SRC 1: (Not in use)
[ 85.895599] PVR_K: SGX Host control:
[ 85.895629] PVR_K: (HC-0) 0x00000001 0x00000000 0x00000000 0x00000001
[ 85.895629] PVR_K: (HC-10) 0x00000009 0x00000000 0x0000000A 0x0001B04A
[ 85.895660] PVR_K: (HC-20) 0x00000002 0x00000001 0x00000001 0x00000000
[ 85.895690] PVR_K: (HC-30) 0x00000015 0x000005E7 0xF33AA7F4 0x00000000
[ 85.895690] PVR_K: SGX TA/3D control:
[ 85.895721] PVR_K: (T3C-0) 0x0F003000 0x0F003120 0x0F002000 0x00000000
[ 85.895721] PVR_K: (T3C-10) 0x00000000 0x00000001 0x00000002 0x00000001
[ 85.895751] PVR_K: (T3C-20) 0x0F007F40 0x00000000 0x00000000 0x00000000
[ 85.895782] PVR_K: (T3C-30) 0x00000000 0x00000000 0x00000000 0x00000000
[ 85.895782] PVR_K: (T3C-40) 0x00000000 0x00000000 0x00000000 0x00000000
[ 85.895812] PVR_K: (T3C-50) 0x00000000 0x0F007F40 0x00000000 0x00000000
[ 85.895843] PVR_K: (T3C-60) 0x0F007F40 0x00000000 0x00000000 0x00000000
[ 85.895843] PVR_K: (T3C-70) 0x00000000 0x00000000 0x00000000 0x00000000
[ 85.895874] PVR_K: (T3C-80) 0x00000000 0x0F0BC4D4 0x00000000 0x0F000000
[ 85.895904] PVR_K: (T3C-90) 0x8AEFE000 0x0F08CF00 0x0F0BC4D4 0x0F088880
[ 85.895904] PVR_K: (T3C-A0) 0x0F007F40 0x00000000 0x00000000 0x00000000
[ 85.895935] PVR_K: (T3C-B0) 0x00000000 0x00000002 0x00000000 0x004F2D9D
[ 85.895965] PVR_K: (T3C-C0) 0x00000001 0x00000000 0x00000000 0x00000000
[ 85.895965] PVR_K: (T3C-D0) 0x00000000 0x00000000 0x00000000 0x00000000
[ 85.895996] PVR_K: (T3C-E0) 0x00000009 0x00000000 0x0F000000 0x80008000
[ 85.896087] PVR_K: (T3C-F0) 0x80048000 0x0F004000 0x0F007C20 0x0F002020
[ 85.896118] PVR_K: (T3C-100) 0x0F088000 0x0F088000 0x00000000 0x00000000
[ 85.896148] PVR_K: SGX Kernel CCB WO:0x5C RO:0x5C
[ 87.229522] PVR_K: HWRecoveryResetSGX: SGX Hardware Recovery triggered
[ 87.229553] PVR_K: SGX debug (1.6.16.4117)
[ 87.229553] PVR_K: (P0) EUR_CR_EVENT_STATUS: 20000000
[ 87.229583] PVR_K: (P0) EUR_CR_EVENT_STATUS2: 00000000
[ 87.229614] PVR_K: (P0) EUR_CR_BIF_CTRL: 00000000
[ 87.229614] PVR_K: (P0) EUR_CR_BIF_INT_STAT: 00000000
[ 87.229644] PVR_K: (P0) EUR_CR_BIF_FAULT: 00000000
[ 87.229644] PVR_K: (P0) EUR_CR_BIF_MEM_REQ_STAT: 00000000
[ 87.229675] PVR_K: (P0) EUR_CR_CLKGATECTL: 00212120
[ 87.229675] PVR_K: (P0) EUR_CR_PDS_PC_BASE: 00301EF4
[ 87.229705] PVR_K: Flip Command Complete Data 0 for display device 1:
[ 87.229736] PVR_K: SRC 0: (Not in use)
[ 87.229736] PVR_K: SRC 1: (Not in use)
[ 87.229766] PVR_K: SGX Host control:
[ 87.229766] PVR_K: (HC-0) 0x00000001 0x00000000 0x00000000 0x00000001
[ 87.229797] PVR_K: (HC-10) 0x0000000A 0x00000000 0x0000000A 0x0001B04A
[ 87.229827] PVR_K: (HC-20) 0x00000002 0x00000001 0x00000001 0x00000000
[ 87.229827] PVR_K: (HC-30) 0x00000017 0x0000068D 0xF34F0A20 0x00000000
[ 87.229858] PVR_K: SGX TA/3D control:
[ 87.229858] PVR_K: (T3C-0) 0x0F003000 0x0F003120 0x0F002000 0x00000000
[ 87.229888] PVR_K: (T3C-10) 0x00000000 0x00000001 0x00000002 0x00000001
[ 87.229919] PVR_K: (T3C-20) 0x0F007F40 0x00000000 0x00000000 0x00000000
[ 87.229919] PVR_K: (T3C-30) 0x00000000 0x00000000 0x00000000 0x00000000
[ 87.229949] PVR_K: (T3C-40) 0x00000000 0x00000000 0x00000000 0x00000000
[ 87.229980] PVR_K: (T3C-50) 0x00000000 0x0F007F40 0x00000000 0x00000000
[ 87.229980] PVR_K: (T3C-60) 0x0F007F40 0x00000000 0x00000000 0x00000000
[ 87.230010] PVR_K: (T3C-70) 0x00000000 0x00000000 0x00000000 0x00000000
[ 87.230041] PVR_K: (T3C-80) 0x00000000 0x0F0BC514 0x00000000 0x0F000000
[ 87.230041] PVR_K: (T3C-90) 0x8AEFE000 0x0F08D5C0 0x0F0BC514 0x0F088880
[ 87.230072] PVR_K: (T3C-A0) 0x0F007F40 0x00000000 0x00000000 0x00000000
[ 87.230102] PVR_K: (T3C-B0) 0x00000000 0x00000002 0x00000000 0x004A40BF
[ 87.230102] PVR_K: (T3C-C0) 0x00000001 0x00000000 0x00000000 0x00000000
[ 87.230133] PVR_K: (T3C-D0) 0x00000000 0x00000000 0x00000000 0x00000000
[ 87.230163] PVR_K: (T3C-E0) 0x0000000A 0x00000000 0x0F000000 0x80008000
[ 87.230163] PVR_K: (T3C-F0) 0x80048000 0x0F004000 0x0F007C20 0x0F002020
[ 87.230194] PVR_K: (T3C-100) 0x0F088000 0x0F088000 0x00000000 0x00000000
[ 87.230224] PVR_K: SGX Kernel CCB WO:0x62 RO:0x62
[ 90.045471] PVR_K: HWRecoveryResetSGX: SGX Hardware Recovery triggered
[ 90.045501] PVR_K: SGX debug (1.6.16.4117)
[ 90.045501] PVR_K: (P0) EUR_CR_EVENT_STATUS: 20000000
[ 90.045532] PVR_K: (P0) EUR_CR_EVENT_STATUS2: 00000000
[ 90.045562] PVR_K: (P0) EUR_CR_BIF_CTRL: 00000000
[ 90.045562] PVR_K: (P0) EUR_CR_BIF_INT_STAT: 00000000
[ 90.045593] PVR_K: (P0) EUR_CR_BIF_FAULT: 00000000
[ 90.045593] PVR_K: (P0) EUR_CR_BIF_MEM_REQ_STAT: 00000000
[ 90.045623] PVR_K: (P0) EUR_CR_CLKGATECTL: 00212120
[ 90.045623] PVR_K: (P0) EUR_CR_PDS_PC_BASE: 00305B4C
[ 90.045654] PVR_K: Flip Command Complete Data 0 for display device 1:
[ 90.045684] PVR_K: SRC 0: (Not in use)
[ 90.045684] PVR_K: SRC 1: (Not in use)
[ 90.045715] PVR_K: SGX Host control:
[ 90.045715] PVR_K: (HC-0) 0x00000001 0x00000000 0x00000000 0x00000001
[ 90.045745] PVR_K: (HC-10) 0x0000000B 0x00000000 0x0000000A 0x0001B04A
[ 90.045776] PVR_K: (HC-20) 0x00000002 0x00000001 0x00000001 0x00000000
[ 90.045776] PVR_K: (HC-30) 0x0000001B 0x0000073E 0xF379F3C0 0x00000000
[ 90.045806] PVR_K: SGX TA/3D control:
[ 90.045806] PVR_K: (T3C-0) 0x0F003000 0x0F003120 0x0F002000 0x00000000
[ 90.045837] PVR_K: (T3C-10) 0x00000000 0x00000001 0x00000002 0x00000001
[ 90.045867] PVR_K: (T3C-20) 0x0F007F40 0x00000000 0x00000000 0x00000000
[ 90.045867] PVR_K: (T3C-30) 0x00000000 0x00000000 0x00000000 0x00000000
[ 90.045898] PVR_K: (T3C-40) 0x00000000 0x00000000 0x00000000 0x00000000
[ 90.045928] PVR_K: (T3C-50) 0x00000000 0x0F007F40 0x00000000 0x00000000
[ 90.045928] PVR_K: (T3C-60) 0x0F007F40 0x00000000 0x00000000 0x00000000
[ 90.045959] PVR_K: (T3C-70) 0x00000000 0x00000000 0x00000000 0x00000000
[ 90.045989] PVR_K: (T3C-80) 0x00000000 0x0F0BC514 0x00000000 0x0F000000
[ 90.045989] PVR_K: (T3C-90) 0x8AEFE000 0x0F08E340 0x0F0BC514 0x0F088880
[ 90.046020] PVR_K: (T3C-A0) 0x0F007F40 0x00000000 0x0F088880 0x00000000
[ 90.046051] PVR_K: (T3C-B0) 0x00000000 0x00000002 0x00000000 0x004F1779
[ 90.046051] PVR_K: (T3C-C0) 0x00000001 0x00000000 0x00000000 0x00000000
[ 90.046081] PVR_K: (T3C-D0) 0x00000000 0x00000000 0x00000000 0x00000000
[ 90.046112] PVR_K: (T3C-E0) 0x0000000C 0x0000000B 0x0F000000 0x80008000
[ 90.046112] PVR_K: (T3C-F0) 0x80048000 0x0F004000 0x0F007C20 0x0F002020
[ 90.046142] PVR_K: (T3C-100) 0x0F088000 0x0F088000 0x00000000 0x00000000
[ 90.046173] PVR_K: SGX Kernel CCB WO:0x6D RO:0x6D
[ 93.195098] PVR_K: HWRecoveryResetSGX: SGX Hardware Recovery triggered
[ 93.195129] PVR_K: SGX debug (1.6.16.4117)
[ 93.195159] PVR_K: (P0) EUR_CR_EVENT_STATUS: 20000000
[ 93.195159] PVR_K: (P0) EUR_CR_EVENT_STATUS2: 00000000
[ 93.195190] PVR_K: (P0) EUR_CR_BIF_CTRL: 00000000
[ 93.195190] PVR_K: (P0) EUR_CR_BIF_INT_STAT: 00000000
[ 93.195220] PVR_K: (P0) EUR_CR_BIF_FAULT: 00000000
[ 93.195220] PVR_K: (P0) EUR_CR_BIF_MEM_REQ_STAT: 00000000
[ 93.195251] PVR_K: (P0) EUR_CR_CLKGATECTL: 00212120
[ 93.195281] PVR_K: (P0) EUR_CR_PDS_PC_BASE: 0030380C
[ 93.195281] PVR_K: Flip Command Complete Data 0 for display device 1:
[ 93.195312] PVR_K: SRC 0: (Not in use)
[ 93.195312] PVR_K: SRC 1: (Not in use)
[ 93.195343] PVR_K: SGX Host control:
[ 93.195343] PVR_K: (HC-0) 0x00000001 0x00000000 0x00000000 0x00000001
[ 93.195373] PVR_K: (HC-10) 0x0000000C 0x00000000 0x0000000A 0x0001B04A
[ 93.195404] PVR_K: (HC-20) 0x00000002 0x00000001 0x00000001 0x00000000
[ 93.195404] PVR_K: (HC-30) 0x0000001D 0x000007E4 0xF3A9FD8C 0x00000000
[ 93.195434] PVR_K: SGX TA/3D control:
[ 93.195465] PVR_K: (T3C-0) 0x0F003000 0x0F003120 0x0F002000 0x00000000
[ 93.195465] PVR_K: (T3C-10) 0x00000000 0x00000001 0x00000002 0x00000001
[ 93.195495] PVR_K: (T3C-20) 0x0F007F40 0x00000000 0x00000000 0x00000000
[ 93.195526] PVR_K: (T3C-30) 0x00000000 0x00000000 0x00000000 0x00000000
[ 93.195526] PVR_K: (T3C-40) 0x00000000 0x00000000 0x00000000 0x00000000
[ 93.195556] PVR_K: (T3C-50) 0x00000000 0x0F007F40 0x00000000 0x00000000
[ 93.195587] PVR_K: (T3C-60) 0x0F007F40 0x00000000 0x00000000 0x00000000
[ 93.195587] PVR_K: (T3C-70) 0x00000000 0x00000000 0x00000000 0x00000000
[ 93.195617] PVR_K: (T3C-80) 0x00000000 0x0F0BC4D4 0x00000000 0x0F000000
[ 93.195648] PVR_K: (T3C-90) 0x8AEFE000 0x0F08EA00 0x0F0BC4D4 0x0F088880
[ 93.195648] PVR_K: (T3C-A0) 0x0F007F40 0x00000000 0x00000000 0x00000000
[ 93.195678] PVR_K: (T3C-B0) 0x00000000 0x00000002 0x00000000 0x004F2A45
[ 93.195709] PVR_K: (T3C-C0) 0x00000001 0x00000000 0x00000000 0x00000000
[ 93.195709] PVR_K: (T3C-D0) 0x00000000 0x00000000 0x00000000 0x00000000
[ 93.195739] PVR_K: (T3C-E0) 0x0000000D 0x0000000B 0x0F000000 0x80008000
[ 93.195770] PVR_K: (T3C-F0) 0x80048000 0x0F004000 0x0F007C20 0x0F002020
[ 93.195770] PVR_K: (T3C-100) 0x0F088000 0x0F088000 0x00000000 0x00000000
[ 93.195800] PVR_K: SGX Kernel CCB WO:0x73 RO:0x73
[ 105.895202] PVR_K: HWRecoveryResetSGX: SGX Hardware Recovery triggered
[ 105.895233] PVR_K: SGX debug (1.6.16.4117)
[ 105.895233] PVR_K: (P0) EUR_CR_EVENT_STATUS: 20000000
[ 105.895263] PVR_K: (P0) EUR_CR_EVENT_STATUS2: 00000000
[ 105.895263] PVR_K: (P0) EUR_CR_BIF_CTRL: 00000000
[ 105.895294] PVR_K: (P0) EUR_CR_BIF_INT_STAT: 00000000
[ 105.895294] PVR_K: (P0) EUR_CR_BIF_FAULT: 00000000
[ 105.895324] PVR_K: (P0) EUR_CR_BIF_MEM_REQ_STAT: 00000000
[ 105.895355] PVR_K: (P0) EUR_CR_CLKGATECTL: 00212120
[ 105.895355] PVR_K: (P0) EUR_CR_PDS_PC_BASE: 003046AC
[ 105.895385] PVR_K: Flip Command Complete Data 0 for display device 1:
[ 105.895416] PVR_K: SRC 0: (Not in use)
[ 105.895416] PVR_K: SRC 1: (Not in use)
[ 105.895416] PVR_K: SGX Host control:
[ 105.895446] PVR_K: (HC-0) 0x00000001 0x00000000 0x00000000 0x00000001
[ 105.895477] PVR_K: (HC-10) 0x0000000D 0x00000000 0x0000000A 0x0001B04A
[ 105.895477] PVR_K: (HC-20) 0x00000002 0x00000001 0x00000001 0x00000000
[ 105.895507] PVR_K: (HC-30) 0x0000001F 0x0000088A 0xF46BCFF4 0x00000000
[ 105.895538] PVR_K: SGX TA/3D control:
[ 105.895538] PVR_K: (T3C-0) 0x0F003000 0x0F003120 0x0F002000 0x00000000
[ 105.895568] PVR_K: (T3C-10) 0x00000000 0x00000001 0x00000002 0x00000001
[ 105.895599] PVR_K: (T3C-20) 0x0F007F40 0x00000000 0x00000000 0x00000000
[ 105.895599] PVR_K: (T3C-30) 0x00000000 0x00000000 0x00000000 0x00000000
[ 105.895629] PVR_K: (T3C-40) 0x00000000 0x00000000 0x00000000 0x00000000
[ 105.895660] PVR_K: (T3C-50) 0x00000000 0x0F007F40 0x00000000 0x00000000
[ 105.895660] PVR_K: (T3C-60) 0x0F007F40 0x00000000 0x00000000 0x00000000
[ 105.895690] PVR_K: (T3C-70) 0x00000000 0x00000000 0x00000000 0x00000000
[ 105.895690] PVR_K: (T3C-80) 0x00000000 0x0F0BC514 0x00000000 0x0F000000
[ 105.895721] PVR_K: (T3C-90) 0x8AEFE000 0x0F08F0C0 0x0F0BC514 0x0F088880
[ 105.895751] PVR_K: (T3C-A0) 0x0F007F40 0x00000000 0x00000000 0x00000000
[ 105.895782] PVR_K: (T3C-B0) 0x00000000 0x00000002 0x00000000 0x004F3D51
[ 105.895782] PVR_K: (T3C-C0) 0x00000001 0x00000000 0x00000000 0x00000000
[ 105.895812] PVR_K: (T3C-D0) 0x00000000 0x00000000 0x00000000 0x00000000
[ 105.895843] PVR_K: (T3C-E0) 0x0000000E 0x0000000B 0x0F000000 0x80008000
[ 105.895843] PVR_K: (T3C-F0) 0x80048000 0x0F004000 0x0F007C20 0x0F002020
[ 105.895874] PVR_K: (T3C-100) 0x0F088000 0x0F088000 0x00000000 0x00000000
[ 105.895874] PVR_K: SGX Kernel CCB WO:0x79 RO:0x79
[ 107.811828] PVR_K: HWRecoveryResetSGX: SGX Hardware Recovery triggered
[ 107.811859] PVR_K: SGX debug (1.6.16.4117)
[ 107.811889] PVR_K: (P0) EUR_CR_EVENT_STATUS: 20000000
[ 107.811889] PVR_K: (P0) EUR_CR_EVENT_STATUS2: 00000000
[ 107.811920] PVR_K: (P0) EUR_CR_BIF_CTRL: 00000000
[ 107.811950] PVR_K: (P0) EUR_CR_BIF_INT_STAT: 00000000
[ 107.811950] PVR_K: (P0) EUR_CR_BIF_FAULT: 00000000
[ 107.811981] PVR_K: (P0) EUR_CR_BIF_MEM_REQ_STAT: 00000000
[ 107.811981] PVR_K: (P0) EUR_CR_CLKGATECTL: 00212120
[ 107.812011] PVR_K: (P0) EUR_CR_PDS_PC_BASE: 0030554C
[ 107.812042] PVR_K: Flip Command Complete Data 0 for display device 1:
[ 107.812042] PVR_K: SRC 0: (Not in use)
[ 107.812072] PVR_K: SRC 1: (Not in use)
[ 107.812072] PVR_K: SGX Host control:
[ 107.812103] PVR_K: (HC-0) 0x00000001 0x00000000 0x00000000 0x00000001
[ 107.812103] PVR_K: (HC-10) 0x0000000E 0x00000000 0x0000000A 0x0001B04A
[ 107.812133] PVR_K: (HC-20) 0x00000002 0x00000001 0x00000001 0x00000000
[ 107.812164] PVR_K: (HC-30) 0x00000021 0x00000931 0xF4890448 0x00000000
[ 107.812164] PVR_K: SGX TA/3D control:
[ 107.812194] PVR_K: (T3C-0) 0x0F003000 0x0F003120 0x0F002000 0x00000000
[ 107.812194] PVR_K: (T3C-10) 0x00000000 0x00000001 0x00000002 0x00000001
[ 107.812225] PVR_K: (T3C-20) 0x0F007F40 0x00000000 0x00000000 0x00000000
[ 107.812255] PVR_K: (T3C-30) 0x00000000 0x00000000 0x00000000 0x00000000
[ 107.812255] PVR_K: (T3C-40) 0x00000000 0x00000000 0x00000000 0x00000000
[ 107.812286] PVR_K: (T3C-50) 0x00000000 0x0F007F40 0x00000000 0x00000000
[ 107.812316] PVR_K: (T3C-60) 0x0F007F40 0x00000000 0x00000000 0x00000000
[ 107.812316] PVR_K: (T3C-70) 0x00000000 0x00000000 0x00000000 0x00000000
[ 107.812347] PVR_K: (T3C-80) 0x00000000 0x0F0BC4D4 0x00000000 0x0F000000
[ 107.812377] PVR_K: (T3C-90) 0x8AEFE000 0x0F08F780 0x0F0BC4D4 0x0F088880
[ 107.812377] PVR_K: (T3C-A0) 0x0F007F40 0x00000000 0x00000000 0x00000000
[ 107.812408] PVR_K: (T3C-B0) 0x00000000 0x00000002 0x00000000 0x004F50BD
[ 107.812438] PVR_K: (T3C-C0) 0x00000001 0x00000000 0x00000000 0x00000000
[ 107.812438] PVR_K: (T3C-D0) 0x00000000 0x00000000 0x00000000 0x00000000
[ 107.812469] PVR_K: (T3C-E0) 0x0000000F 0x0000000B 0x0F000000 0x80008000
[ 107.812500] PVR_K: (T3C-F0) 0x80048000 0x0F004000 0x0F007C20 0x0F002020
[ 107.812500] PVR_K: (T3C-100) 0x0F088000 0x0F088000 0x00000000 0x00000000
[ 107.812530] PVR_K: SGX Kernel CCB WO:0x7F RO:0x7F
[ 110.011505] PVR_K: HWRecoveryResetSGX: SGX Hardware Recovery triggered
[ 110.011535] PVR_K: SGX debug (1.6.16.4117)
[ 110.011566] PVR_K: (P0) EUR_CR_EVENT_STATUS: 20000000
[ 110.011596] PVR_K: (P0) EUR_CR_EVENT_STATUS2: 00000000
[ 110.011596] PVR_K: (P0) EUR_CR_BIF_CTRL: 00000000
[ 110.011627] PVR_K: (P0) EUR_CR_BIF_INT_STAT: 00000000
[ 110.011627] PVR_K: (P0) EUR_CR_BIF_FAULT: 00000000
[ 110.011657] PVR_K: (P0) EUR_CR_BIF_MEM_REQ_STAT: 00000000
[ 110.011657] PVR_K: (P0) EUR_CR_CLKGATECTL: 00212120
[ 110.011688] PVR_K: (P0) EUR_CR_PDS_PC_BASE: 003064AC
[ 110.011718] PVR_K: Flip Command Complete Data 0 for display device 1:
[ 110.011718] PVR_K: SRC 0: (Not in use)
[ 110.011749] PVR_K: SRC 1: (Not in use)
[ 110.011749] PVR_K: SGX Host control:
[ 110.011779] PVR_K: (HC-0) 0x00000001 0x00000000 0x00000000 0x00000001
[ 110.011779] PVR_K: (HC-10) 0x0000000F 0x00000000 0x0000000A 0x0001B04A
[ 110.011810] PVR_K: (HC-20) 0x00000002 0x00000001 0x00000001 0x00000000
[ 110.011840] PVR_K: (HC-30) 0x00000023 0x000009D7 0xF4AAA1B0 0x00000000
[ 110.011840] PVR_K: SGX TA/3D control:
[ 110.011871] PVR_K: (T3C-0) 0x0F003000 0x0F003120 0x0F002000 0x00000000
[ 110.011901] PVR_K: (T3C-10) 0x00000000 0x00000001 0x00000002 0x00000001
[ 110.011901] PVR_K: (T3C-20) 0x0F007F40 0x00000000 0x00000000 0x00000000
[ 110.011932] PVR_K: (T3C-30) 0x00000000 0x00000000 0x00000000 0x00000000
[ 110.011932] PVR_K: (T3C-40) 0x00000000 0x00000000 0x00000000 0x00000000
[ 110.011962] PVR_K: (T3C-50) 0x00000000 0x0F007F40 0x00000000 0x00000000
[ 110.011993] PVR_K: (T3C-60) 0x0F007F40 0x00000000 0x00000000 0x00000000
[ 110.011993] PVR_K: (T3C-70) 0x00000000 0x00000000 0x00000000 0x00000000
[ 110.012023] PVR_K: (T3C-80) 0x00000000 0x0F0BC514 0x00000000 0x0F000000
[ 110.012054] PVR_K: (T3C-90) 0x8AEFE000 0x0F08FE40 0x0F0BC514 0x0F088880
[ 110.012054] PVR_K: (T3C-A0) 0x0F007F40 0x00000000 0x00000000 0x00000000
[ 110.012084] PVR_K: (T3C-B0) 0x00000000 0x00000002 0x00000000 0x005814DE
[ 110.012115] PVR_K: (T3C-C0) 0x00000001 0x00000000 0x00000000 0x00000000
[ 110.012115] PVR_K: (T3C-D0) 0x00000000 0x00000000 0x00000000 0x00000000
[ 110.012145] PVR_K: (T3C-E0) 0x00000010 0x0000000B 0x0F000000 0x80008000
[ 110.012176] PVR_K: (T3C-F0) 0x80048000 0x0F004000 0x0F007C20 0x0F002020
[ 110.012176] PVR_K: (T3C-100) 0x0F088000 0x0F088000 0x00000000 0x00000000
[ 110.012207] PVR_K: SGX Kernel CCB WO:0x85 RO:0x85
[ 116.044830] PVR_K: HWRecoveryResetSGX: SGX Hardware Recovery triggered
[ 116.044860] PVR_K: SGX debug (1.6.16.4117)
[ 116.044891] PVR_K: (P0) EUR_CR_EVENT_STATUS: 20000000
[ 116.044891] PVR_K: (P0) EUR_CR_EVENT_STATUS2: 00000000
[ 116.044921] PVR_K: (P0) EUR_CR_BIF_CTRL: 00000000
[ 116.044921] PVR_K: (P0) EUR_CR_BIF_INT_STAT: 00000000
[ 116.044952] PVR_K: (P0) EUR_CR_BIF_FAULT: 00000000
[ 116.044952] PVR_K: (P0) EUR_CR_BIF_MEM_REQ_STAT: 00000000
[ 116.044982] PVR_K: (P0) EUR_CR_CLKGATECTL: 00212120
[ 116.045013] PVR_K: (P0) EUR_CR_PDS_PC_BASE: 0030406C
[ 116.045013] PVR_K: Flip Command Complete Data 0 for display device 1:
[ 116.045043] PVR_K: SRC 0: (Not in use)
[ 116.045043] PVR_K: SRC 1: (Not in use)
[ 116.045074] PVR_K: SGX Host control:
[ 116.045074] PVR_K: (HC-0) 0x00000001 0x00000000 0x00000000 0x00000001
[ 116.045104] PVR_K: (HC-10) 0x00000010 0x00000000 0x0000000A 0x0001B04A
[ 116.045135] PVR_K: (HC-20) 0x00000002 0x00000001 0x00000001 0x00000000
[ 116.045135] PVR_K: (HC-30) 0x00000025 0x00000A7E 0xF506A7C0 0x00000000
[ 116.045166] PVR_K: SGX TA/3D control:
[ 116.045196] PVR_K: (T3C-0) 0x0F003000 0x0F003120 0x0F002000 0x00000000
[ 116.045196] PVR_K: (T3C-10) 0x00000000 0x00000001 0x00000002 0x00000001
[ 116.045227] PVR_K: (T3C-20) 0x0F007F40 0x00000000 0x00000000 0x00000000
[ 116.045257] PVR_K: (T3C-30) 0x00000000 0x00000000 0x00000000 0x00000000
[ 116.045257] PVR_K: (T3C-40) 0x00000000 0x00000000 0x00000000 0x00000000
[ 116.045288] PVR_K: (T3C-50) 0x00000000 0x0F007F40 0x00000000 0x00000000
[ 116.045288] PVR_K: (T3C-60) 0x0F007F40 0x00000000 0x00000000 0x00000000
[ 116.045318] PVR_K: (T3C-70) 0x00000000 0x00000000 0x00000000 0x00000000
[ 116.045349] PVR_K: (T3C-80) 0x00000000 0x0F0BC4D4 0x00000000 0x0F000000
[ 116.045349] PVR_K: (T3C-90) 0x8AEFE000 0x0F090500 0x0F0BC4D4 0x0F088880
[ 116.045379] PVR_K: (T3C-A0) 0x0F007F40 0x00000000 0x00000000 0x00000000
[ 116.045410] PVR_K: (T3C-B0) 0x00000000 0x00000002 0x00000000 0x0034269E
[ 116.045410] PVR_K: (T3C-C0) 0x00000001 0x00000000 0x00000000 0x00000000
[ 116.045440] PVR_K: (T3C-D0) 0x00000000 0x00000000 0x00000000 0x00000000
[ 116.045471] PVR_K: (T3C-E0) 0x00000011 0x0000000B 0x0F000000 0x80008000
[ 116.045471] PVR_K: (T3C-F0) 0x80048000 0x0F004000 0x0F007C20 0x0F002020
[ 116.045501] PVR_K: (T3C-100) 0x0F088000 0x0F088000 0x00000000 0x00000000
[ 116.045532] PVR_K: SGX Kernel CCB WO:0x8B RO:0x8B

I tried the 4.03.00.02_1.6.16.3977 driver.  The EX Plus Alpha menu displayed and the device was completely unresponsive.  I restarted.

Thanks for your interest in this.  I'll continue to test EX Plus Alpha as I can come up with things to try as I prefer it's interface, but use an alternative emulator for regular usage.

 

[spn-x]

Should the issue with pressing the "^" quitting the app be solved by now? I still have this problem with the most recent version (Only tested the SNES emu)

edit.: and the top-right box is still there for me, I also have a CC model

 

[ptitSeb]

Should the issue with pressing the "^" quitting the app be solved by now? I still have this problem with the most recent version (Only tested the SNES emu)

I don't remember that issue. What is it about?

edit.: and the top-right box is still there for me, I also have a CC model

You mean, the tearing effect? It should be solved now, be sure you have latest PND.

 

[spn-x]

I don't remember that issue. What is it about?

When I want to change the rom directory and use the touch screen to navigate/ go up one folder the emulator crashes/goes back to the desktop.

Somebody on page 19 also mentioned this problem.

You mean, the tearing effect? It should be solved now, be sure you have latest PND.

Not the tearing but there is a small square visible in the top right corner when playing a game

edit.: It's not impossible to nagivate to the rom directory, I can still use the d-pad for that

edit2.: The small square seems to be gone... it's only in the menus now

 

[BlueJelly]

Hello folks. In the latest versions of the ptitSeb (thanks for the ports dude!) ports of the this emulator series, in the cheats menu, I am unable to scroll up or down on the cheat menu to select cheats. Also, attempting to utilize a cheat via stylus tap crashes the emulator back to the XFCE desktop. I have encountered this with the SNES and MegaDrive emulators and think that it is safe to say that this will happen with ALL explusalpha series emulators on the Pandora.

 

Also, here is the text of the pndrun.out file from (for example) SNES9xEX. It is plain text since my lurker butt is apparently unable to attach pndrun.out files.

 

=======================================================================================

PND             : /media/PANDORA1/pandora/menu/Snes9xEX.pnd

PND_FSTYPE      : Squashfs

APPDATADIR      : /media/PANDORA1/pandora/appdata/snes9xex

APPDD_FSTYPE    : vfat

PND_CPUSPEED    : <unset>

EXENAME         : runscript.sh

ARGUMENTS       : <unset>

=======================================================================================

[ START ]--- Mount the PND ----------

Mounting : mount -t squashfs -o ro "/dev/loop0" "/mnt/utmp/snes9xex"

Mounting the Union FS : mount -t aufs -o exec,noplink,dirs="/media/PANDORA1/pandora/appdata/snes9xex=rw+nolwh":"/mnt/pnd/snes9xex=rr" none "/mnt/utmp/snes9xex"

[sUCCESS]--- Mount the PND ----------

[ START ]--- Starting the application ( runscript.sh  ) ----------

--------------------------------------------------------------

Setting PATH to /mnt/utmp/snes9xex:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/bin/X11:/usr/games

--------------------------------------------------------------

Setting LD_LIBRARY_PATH to /mnt/utmp/snes9xex/lib:/lib:/usr/lib

changing dir to: /dev/input

changing dir to: /mnt/utmp/snes9xex

changing dir to: /media/PANDORA1/pandora/appdata/snes9xex/ROMs

changing dir to: /mnt/utmp/snes9xex

changing dir to: /media/PANDORA1/pandora/appdata/snes9xex/ROMs

changing dir to: .

./runscript.sh: line 49:  2964 Segmentation fault      ./s9xp $@

[sUCCESS]--- Starting the application ( runscript.sh  ) ----------

[ START ]--- Restoring the frame buffer status ----------

[sUCCESS]--- Restoring the frame buffer status ----------

[ START ]--- Restoring nub mode ----------

[sUCCESS]--- Restoring nub mode ----------

[ START ]--- uMount the PND ----------

[ START ]--- Waiting the Union to be available ----------

[sUCCESS]--- Waiting the Union to be available ----------

auplinklink.c:223: AUFS_CTL_PLINK_MAINT: Inappropriate ioctl for device

rmdir: failed to remove `/mnt/utmp/snes9xex': Device or resource busy

[ START ]--- Waiting the PND mount dir to be free ----------

[sUCCESS]--- Waiting the PND mount dir to be free ----------

cleanup done

[sUCCESS]--- uMount the PND ----------

=======================================================================================

Return code is : 1

 

[Perky_Goth]

Same here, the last version (and probably the previous one, I can't remember if I tested it) of NESemu has the same issue.

 

[mr.white]

@joshua: Good exactly the same problem as you. I know there are tons of other GB emus on pandora but this is my favorite GB emu. This happens on both versions from the repo.

 

[ptitSeb]

Hello folks. In the latest versions of the ptitSeb (thanks for the ports dude!) ports of the this emulator series, in the cheats menu, I am unable to scroll up or down on the cheat menu to select cheats. Also, attempting to utilize a cheat via stylus tap crashes the emulator back to the XFCE desktop. I have encountered this with the SNES and MegaDrive emulators and think that it is safe to say that this will happen with ALL explusalpha series emulators on the Pandora.

 

Also, here is the text of the pndrun.out file from (for example) SNES9xEX. It is plain text since my lurker butt is apparently unable to attach pndrun.out files.

 

Same here, the last version (and probably the previous one, I can't remember if I tested it) of NESemu has the same issue.

@joshua: Good exactly the same problem as you. I know there are tons of other GB emus on pandora but this is my favorite GB emu. This happens on both versions from the repo.

Can you try those version:

MDemu

NESemu

GBCemu

(EDIT: links removed, better versions are on the repo)

I think it's fixed, but I prefer confirmation before flooding the repo...

 

[Manaplayer]

Sorry for my english

Can anyone explain to me why this happen to me?:

From the beginning on the snes and gba emulators are playing very slow, especially when much is happening on screen (i know it is normal). But for example on Golden sun the fighting the sound is cracking and the picture is very slow.

I'm using firmware 1.72 and emulators 1.59.11 - But this happens even on older firmware and emulator version. I have tested it to play on cpu frequenzy 1000 - But no change. I'm using emulator configuration default and test some other (sound buffer,picture zoom)

I see on youtube that for example Golden sun is playing very smooth.

Any ideas?

 

[Manaplayer]

Ok,now it seems to go - After some years I have deleted the config data and configurated it to the exact same - Now for example Golden sun runs smooth with cpu speed 600 No idea why it does now - I have deleted the config data a lot in past, but never a change Pandora must have seens that i am writing in this forum - Pandora is searching for another Pandora and is happy

 

[ptitSeb]

Ok,now it seems to go - After some years I have deleted the config data and configurated it to the exact same - Now for example Golden sun runs smooth with cpu speed 600 No idea why it does now - I have deleted the config data a lot in past, but never a change Pandora must have seens that i am writing in this forum - Pandora is searching for another Pandora and is happy

Good it's fixed (I guess it was auto frameskip not active or something like that).

 

[EvilDragon]

I also found a bug. It happened with NEO.emu but probably happens in the other versions as well: It seems you can configure only ONE input device.


I was trying to play Magical Drop III with my wife with one USB controller and one Bluetooth controller. I could set ONE of those up without any problems, but trying to configure both (one for player 1 and one for player 2) always lead to an error message that there's not enough space for another profile and I should delete one.


I guess all those emulators use the same setup system for inputs, so it probably happens with all of them.

 

[edgex004]

I also found a bug. It happened with NEO.emu but probably happens in the other versions as well: It seems you can configure only ONE input device.


I was trying to play Magical Drop III with my wife with one USB controller and one Bluetooth controller. I could set ONE of those up without any problems, but trying to configure both (one for player 1 and one for player 2) always lead to an error message that there's not enough space for another profile and I should delete one.


I guess all those emulators use the same setup system for inputs, so it probably happens with all of them.

I can confirm this with SNES too.

 

[ptitSeb]

Ah ok, Did you tried with the new version ?

I'll try tonight at home...

 

[edgex004]

If you post the new SNES version I can test tonight.

 

[ptitSeb]

If you post the new SNES version I can test tonight.

It's Snes9xEx.(EDIT: link removed, a better version is on the repo)