Super Zaxxon v1.54


Terran

Active Member
Joined
Oct 30, 2009
Messages
527
Age
32
Ein neues Firmware Update ist fertig.

EvilDragon said:
This is a bugfix release for 1.54RC!

Fixes since v1.54RC:

FIX: OS updater: should now ask for reboot after kernel update
FIX: OS updater: attempted to fix hang during update
UPDATE: Config tray: added USB storage item (pmprog)
FIX: Kernel: fixed potential crash on USB cable unplug
UPDATE: Added DSP firmware and startup script to the main image, to be used by .pnds
FIX: Kernel: another attempt to fix charging LED
UPDATE: Kernel: added persistent_ram driver which preserves last kernel session log in /proc/last_kmsg (useful to debug kernel crashes, only works if unit is not powered down)
FIX: Kernel: freed a few more MBs or RAM
UPDATE: Kernel: wifi: added calibration NVS dump/load ability
FIX: PNDstore updated to work on latest firmware (Tempel)
UPDATE: sample DisplayLink/udlfb xorg.conf added (Takedown)
FIX: Kernel: USB OTG related crash fix + driver tweaks

As a reminder, the previous changes (from 1.53 to 1.54RC):
UPDATE Kernel updated to 3.2.39
UPDATE Now comes with every released TI SGX kernel driver so any version of SGX binary blobs can be used
UPDATE Switched to more stable hugetlb patches from ARM (feature mostly used by PCSX currently)
UPDATE Backported CMA (contiguous memory allocator) from 3.5. This eliminated need to reserve VRAM, so more general RAM is available and more VRAM can be allocated on demand (larger resolutions can be used with hardware scaler)
UPDATE various fixes for OTG driver (cable switching between host/peripheral modes should work better)
FIX Various OMAP specific fixes backported from newer kernels
FIX Fixed the issue that you couldn't switch the GUI, reboot or shutdown from XFCE4 (introduced in 1.53)
FIX Fixed an issue of DM3730 not suspending fully (concerns 1GHz units)
FIX Maybe fixed charging LED (again..)
FIX Passwords with special characters should now work as well
NEW Enabled TASKSTATS, DM_CRYPT, xz support and some more USB drivers
NEW Added LED-Settings dialogue. You can now set brightness setting for your Power LED and also disable / enable the SD1/SD2/Bluetooth/WiFi LEDs
NEW Added MiniMenu WiFi Tool (setup WiFi connections from MiniMenu)
NEW Added File Associations for PNDs. Now PNDs can setup different filetypes in their PXML file. Double clicking an associated file will automatically run the PND and load the file.
NEW openal and udlfb added
DOWNLOAD AND INSTALLATION INSTRUCTIONS:

Upgrading from a previous SuperZaxxon version (1.5x):
It's recommended to use the update tool:
SuperZaxxon 1.54 offline updater

The "Upgrade Pandora OS"-Version will most likely cause issues, as there's a bug in there (that is fixed once you have 1.54 installed).
If you REALLY want to do that, here are some brief instructions:

1. The upgrade process might hang. If it doesn't do anything for a few minutes, stop it and restart it (without rebooting). This issue is fixed with 1.54 Final, but as you are upgrading from an older version, it might still happen.
2. VERY IMPORTANT: Be sure to run the upgrade process TWICE IN A ROW! Do NOT toggle Wifi or reboot the unit inbetween! Simply run it two times. If you don't, you will lose the internal Wifi drivers (due to a bug in opkg).
NOTE: That does mean that you need to do it at least THREE times in a row if it hangs! You need to run the upgrade a second time once it completed successfully (without hanging).
Please reboot the Pandora after upgrading.

Be sure to backup any important data you might have in your NAND for the above reasons.
It is recommended to do a full flash in case you are encountering any issues.


Upgrade instructions using the Full-Flash-Image:

Download SuperZaxxon Final v1.54
Download SuperZaxxon Final v1.54 without internal Wifi drivers

Please note: Flashing the new firmware will put your unit back into a default state. All your settings and users will be lost. Of course, this does not apply to PNDs which save their stuff on the SD-Card.

To install it, simply extract the archive onto the root of your SD Card.
Insert the SD Card into the left slot. Keep R (shoulder) pressed while switching on your Pandora and select "Boot from SD1"
It will then flash the firmware onto the NAND. After it's finished, reboot your Pandora and patiently wait until the First Boot Wizard appears on the screen.

If "Boot from SD1" doesn't appear, try to reformat the SD Card using Panasonic SD Formatter, recopy the files and retry.

Please let us know any issues you encounter.

Quelle

Wenn man den v1.54 RC Installiert hat kann man das OS Upgrade ausführen, man sollte es 2 mal hinereinander machen um die Wi-Fi Treiber nicht zu verlieren.

Quelle
 
Re: AW: Super Zaxxon v1.54

<r>Werd ich über Ostern mal draufspielen,danke für die Info.<br/>
<E>:)</E></r>
 
Immer doch gern Ingo. :)

notaz said:
I've updated the updater .pnd to update to 1.54:
SuperZaxxon 1.54 offline updater

This can be used if you have no Internet on pandora or if you are stuck with uninstalled wifi drivers, caused by not running the update twice.
ED: you might want to update the first post with this.


notaz hat den Offline Updater geupdated, damit kann man von 1.5x auf 1.54 ohne Internetverbindung updaten.

Quelle
 
Das mit der geupdateten Update pnd zum updaten finde ich eine super Sache, bei mir geht zwar Wifi ohne Probleme, aber da ich vom RC auf den Final update spare ich mir so das doppelte Updaten..
Wird gerade runtergeladen, genau richtig für meinen 3 Tages Tripp nach Bremen
(bin echt mal gespannt welches meiner 3 Handhelds ich am meißten nutze, der 3DS XL ist jetzt mit Luigis Mansion 2, Castlevania 3DS, und Monster Hunter 3 aber in der engeren Wahl, aber ich hab ja noch die Pandora, die PSVITA, und ein Buch dabei..)
 
Ich lese da heraus dass es ein neues bugfix für die neue v1.54 ist aber ist die 1.54 Firmware schon ne offizielle Version oder ist alles noch im Beta Test? Im Forum wird jedenfalls noch fleissig getestet, eventuell ist das noch nicht die final oder?
 
Also die V1.54 die jetzt im Englischen Forum ausgegeben wurde ist definitiv die Final Version, die andere vor ein paar Wochen war noch Release Kanditate (RC) also eine Testversion..

Und wenn man von RC auf Final Updatet sollte man das 2 mal hintereinander machen weil es irgendwie probleme mit dem WIFI Treiber gibt..
 
Also seit dem Update funktionirt meine Helligkeitssteuerung endlich wieder (ist ziemlich doof wenn man auf Standbye geht und die Displaybeleuchtung bleibt an)

Ich hab jetzt die Offline Installer PND 2 mal hintereinander installiert, und dann via Update OS auch (via Wlanstick) geupdatet, aber irgendwie geht jetzt mein Wlan nicht mehr..
Ist jetzt nicht so schlimm, ich hab einen kleinen Wifi Stick der ist eh schneller, aber irgendwie ist das schon komisch..
 
Hi,

Ich hatte auch das Wifi-Problem. Hab jetzt einen Reflash von SD-Karte gemacht. Danach funktioniert alles wieder einwandfrei.

Gruß,
Farlo
 
Egal, hauptsache die Helligkeitssteuerung geht wieder, für Wifi kann ich ja den Stick benutzen für den Notfall..
Das schau ich mir nächste Woche mal an wie ich das interne Wlan wieder hinbekomme, warscheinlich braucht es wirklich einen Fullflash (oder ich mach das heute noch)
Hauptsache die andere Funktionen laufen, lange Akkulaufzeit und CPU GPU sind für nächste Woche, die Lange Fahrt nach Bremem erst mal wichtiger..
Für Internet hab ich nicht umsonnst das Galaxy Note 2..
 
Schrieb ED im Englischen nicht, dass bei der Verwendung von "Upgrade Pandora OS" jenes zweimal ausgefuehrt werden sollte?

Wenn man den full flash installiert, hat man doch den letzten Stand? Warum das zweimal machen und "Upgrade OS" noch dazu? Glaub' da wurde was misverstanden.

edit: dieses offline installer PND ist das selbe wie Upgrade OS?
 
Ich hab die Upgrade PND 2mal ausgeführt, und nachdem das nicht geholfen hat, Upgrade OS aus dem Menü auch 2mal ausgeführt, hat aber nichts gebracht, ich glaub ich lad gleich den Fullflash.. ich hab ja nur den Midi und den Comunity Codec Pack neu zu installieren..
 
Ich und hatte das gleiche (?) Problem (nach dem update von RC auf final kein WIFI) und dann "full geflashed". Damit tuts wieder.
Was noch (hoffentlich) nicht geht ist mein UMTS Stick. Der alte Installationsweg, der bis 1.53 funktionierte, scheint nicht mehr zu funktionieren. Kein Drama, weil ich den eigentlich nur unter RISC OS nutze aber was muß das muß ;-)
 
wenn ich den deckel zumachen und dann wieder nach ner weile auf hab ich nur nen schwarzen bildschirm mit blinkenden cursor

was kann denn da sein ?
 
Das "Deckelproblem" kenne ich nicht. Schon mal den Support "angemailt"?

Ich habe mein 1GHz upgrade erhalten. SZ 1.52 ist vorinstalliert.
Nach ca. 5 min waren meine beiden UMTS Sticks installiert. Analog dazu.

Auf meiner Batch 1 tut inzwischen SZ 1.54 un der Weg funktioniert nicht mehr. Es wird versucht eine Verbindung aufzubauen. Das bricht dann aber ab. Mit 1.52 funktionierte das auch hier noch klaglos.

Für Tips und Anregungen bin ich immer offen.

-- Fr Apr 26, 2013 14:07 --

Mir gehen die Ideen aus. Keiner meiner Surfsticks funktioniert mit 1.54 :-(( . Bis 1.52 problemlos.
 
Back
Top