Squidgsnes Not Saving

[AquaFox]

Squidgesnes ain't saving for me. Save state works perfectly it's the SRAM that isn't. Everytime I load a game my save is gone. I'm using version 0.391 (the latest). Is there anything I have to do.

Firmware ver: 2.1.0

 

[Shikaku]

It takes 1 minute for SRAM to be saved if it is changed. They work, but remember that you should exit and go back to the main menu.

 

[AquaFox]

It takes 1 minute for SRAM to be saved if it is changed. They work, but remember that you should exit and go back to the main menu.

Squidgesnes main menu or game menu? Please elaborate.

So after saving I leave the game on for a whole minute? (The same thing is happening with gpfce )

 

[gnyffel]

It takes 1 minute for SRAM to be saved if it is changed. They work, but remember that you should exit and go back to the main menu.

Squidgesnes main menu or game menu? Please elaborate.

So after saving I leave the game on for a whole minute? (The same thing is happening with gpfce )

Yeah. One minute with the emulator on, or one minute with the gp2x on?

 

[PokeParadox]

Rule of thumb: exit the emulator before turning off the GP2X.

 

[pariah]

Rule of thumb: exit the emulator before turning off the GP2X.

Same problem here, and leaving it on either in the emu itself or on the main interface doesn't seem to help. Least not from my end.

Pariah B)

 

[WarmFluffyUK]

I had some problems with saving too, when I try and save a game, instead of saving it seems to load a previous save state instead.

 

[AquaFox]

So anyone know a friggin' fix ?

 

[WarmFluffyUK]

So anyone know a friggin' fix ?

I am guessing we will have to wait for it to be fixed in a future release.

 

[AquaFox]

Is it opensource? Where can I get the source.. His page is down.

 

[pariah]

I just keep using save states. That seems to work just fine, though it kind of limits the portability of the save itself. I usually play my gp2x on break at work and then transfer my saves to my PC for use with ZSNES at home, but while the regular saves transfer the save states are a different format so no go there. Ah well. Such is life. Still my favorite emulator for the gp2x.

Pariah B)

 

[mwolson]

I notice that sometimes just after saving, the screen will appear blank with just the SNES border on the screen briefly, and then go back to normal. After this, I'm sure that the save was successful. If I don't get that effect, I repeat the save state until it happens again. I'm not sure that this works 100% of the time, though.