zodttd
Solving your premature emulation since the Tapwave
PSX4GP2X Public Beta 5 released using build 071307 available. Available directly here: http://www.zodttd.com/psx4all/psx4gp2x_071307.zip
More information and all updates and archived releases of psx4gp2x can be found at http://www.zodttd.com
I highly recommend subscribing to the site as it will be growing into a larger more informative place for all of my projects. Soon to come, a compatibility list, video feeds, and FAQs. For now, register and check out the RSS feeds.
So what's new? A LOT! Performance has improved dramatically since Beta 4. Although I'm currently using an older version of Una-i's GPU, it's still fairly compatible and performs well. Some games that are either fullspeed with sound at a 266MHz GP2X or at least close (with various performance settings):
Raiden Project
Buster Bros Collection
Bust A Move 4
Command & Conquer: Red Alert
Let's find some more! Plans are to get a collection of videos of games that perform well currently. With a render frameskip in the works and other various tweaks, soon your favorite game might be there too! So...
[cut]
From the readme.txt:
psx4all’s psx4gp2x
A PSX EMULATOR FOR THE GP2X!
Version: PUBLIC BETA 5 - BUILD 071307
For more information visit http://www.zodttd.com
For discussion of psx4all visit the forums at http://www.gp32x.de
Installation:
- You should have an unzipped psx4gp2x directory where this readme.txt is located.
1. Copy the REQUIRED (not included) psx BIOS file scph1001.bin to the same directory that psx4gp2x’s gpe file is located (./psxgp2x)
2. Copy your ISO/BIN files and/or PocketISO 2.0+ compressed Z/TABLE files over to a directory such as the roms directory in ./psxgp2x
3. Copy the ./psx4gp2x directory to your GP2X storage media
4. Run psx4gp2x_[build_date].gpe
Controls:
GP2X - PSX
STICK - THUMB PAD
A/B/X/Y - CORRESPONDING CIRCLE/SQUARE/TRIANGLE/X BUTTONS
L TRIGGER - L1
R TRIGGER - R1
L TRIGGER+PUSH - L2
R TRIGGER+PUSH - R2
START - START
SELECT - SELECT
GP2X SPECIFIC——————-PSX4GP2X
VOLUME MIDDLE - IN-GAME MENU
L TRIGGER+VOL-DOWN - PSX CYCLE DOWN
L TRIGGER+VOL-UP - PSX CYCLE UP
R TRIGGER+VOL-DOWN - PSX CLOCK DOWN
R TRIGGER+VOL-UP - PSX CLOCK UP
Tips for getting maximum performance:
- Using interlace 1+ setting gives more performance at the cost of blockier looking graphics from upscaling
- Turning sound off may give a slight performance increase
- Use your best overclock and use ram timings on if possible
- Be sure to find the best (working) PSX CLOCK setting. Usually a lower PSX CLOCK setting that keeps VSync less than 130 while keeping the highest framerate (FPS) is recommended.
- If you feel like tweaking timings more, change PSX CYCLE from 2 to a different value first. BUT IN ORDER FOR THIS OPTION TO BE RECOGINZED, YOU MUST RELOAD THE GAME FROM THE INGAME LOADGAME OPTION EACH TIME YOU WANT IT SET TO THE NEW VALUE!
- Once the PSX CYCLE has been successfully changed, edit the PSX CLOCK timings. Usually PSX CYCLE 1 to 4, maybe 5, is best.
Tips for compatibility with games that freeze or won’t load:
- Change the PSX CYCLE to 1 and change PSX CLOCK to a number between 80 and 104. Do this as soon as the game inits/loads up and then RELOAD THE GAME FROM THE INGAME MENU with these new settings in place.[/cut]
More information and all updates and archived releases of psx4gp2x can be found at http://www.zodttd.com
I highly recommend subscribing to the site as it will be growing into a larger more informative place for all of my projects. Soon to come, a compatibility list, video feeds, and FAQs. For now, register and check out the RSS feeds.
So what's new? A LOT! Performance has improved dramatically since Beta 4. Although I'm currently using an older version of Una-i's GPU, it's still fairly compatible and performs well. Some games that are either fullspeed with sound at a 266MHz GP2X or at least close (with various performance settings):
Raiden Project
Buster Bros Collection
Bust A Move 4
Command & Conquer: Red Alert
Let's find some more! Plans are to get a collection of videos of games that perform well currently. With a render frameskip in the works and other various tweaks, soon your favorite game might be there too! So...
[cut]
From the readme.txt:
psx4all’s psx4gp2x
A PSX EMULATOR FOR THE GP2X!
Version: PUBLIC BETA 5 - BUILD 071307
For more information visit http://www.zodttd.com
For discussion of psx4all visit the forums at http://www.gp32x.de
Installation:
- You should have an unzipped psx4gp2x directory where this readme.txt is located.
1. Copy the REQUIRED (not included) psx BIOS file scph1001.bin to the same directory that psx4gp2x’s gpe file is located (./psxgp2x)
2. Copy your ISO/BIN files and/or PocketISO 2.0+ compressed Z/TABLE files over to a directory such as the roms directory in ./psxgp2x
3. Copy the ./psx4gp2x directory to your GP2X storage media
4. Run psx4gp2x_[build_date].gpe
Controls:
GP2X - PSX
STICK - THUMB PAD
A/B/X/Y - CORRESPONDING CIRCLE/SQUARE/TRIANGLE/X BUTTONS
L TRIGGER - L1
R TRIGGER - R1
L TRIGGER+PUSH - L2
R TRIGGER+PUSH - R2
START - START
SELECT - SELECT
GP2X SPECIFIC——————-PSX4GP2X
VOLUME MIDDLE - IN-GAME MENU
L TRIGGER+VOL-DOWN - PSX CYCLE DOWN
L TRIGGER+VOL-UP - PSX CYCLE UP
R TRIGGER+VOL-DOWN - PSX CLOCK DOWN
R TRIGGER+VOL-UP - PSX CLOCK UP
Tips for getting maximum performance:
- Using interlace 1+ setting gives more performance at the cost of blockier looking graphics from upscaling
- Turning sound off may give a slight performance increase
- Use your best overclock and use ram timings on if possible
- Be sure to find the best (working) PSX CLOCK setting. Usually a lower PSX CLOCK setting that keeps VSync less than 130 while keeping the highest framerate (FPS) is recommended.
- If you feel like tweaking timings more, change PSX CYCLE from 2 to a different value first. BUT IN ORDER FOR THIS OPTION TO BE RECOGINZED, YOU MUST RELOAD THE GAME FROM THE INGAME LOADGAME OPTION EACH TIME YOU WANT IT SET TO THE NEW VALUE!
- Once the PSX CYCLE has been successfully changed, edit the PSX CLOCK timings. Usually PSX CYCLE 1 to 4, maybe 5, is best.
Tips for compatibility with games that freeze or won’t load:
- Change the PSX CYCLE to 1 and change PSX CLOCK to a number between 80 and 104. Do this as soon as the game inits/loads up and then RELOAD THE GAME FROM THE INGAME MENU with these new settings in place.[/cut]
Last edited by a moderator:
