laurens
Member
Hi!
I'm having a weird problem.
When I have a pnd, it runs once fine. For instance, chromium. If I close it, and try to run it again, it fails. If I remove the chromium dir from appdata, it runs fine again. The problem isn't 100% consistent, sometimes it does work fine a second time.
I have a recorded case with Gargoyle, where I saved the output of dmesg & pndrun:
pndrungargoyle_run.out:
dmesg:
I already formatted it with the panasonic formatter.
Is my SD bad? Does anybody have the same problems? Anybody got any clues? It's not my pandora, as I had it with my first one, as well as with my replacement.
Please?
I'm having a weird problem.
When I have a pnd, it runs once fine. For instance, chromium. If I close it, and try to run it again, it fails. If I remove the chromium dir from appdata, it runs fine again. The problem isn't 100% consistent, sometimes it does work fine a second time.
I have a recorded case with Gargoyle, where I saved the output of dmesg & pndrun:
pndrungargoyle_run.out:
rm: cannot remove `/tmp/cpuspeed': No such file or directory
not mounted on loop yet, doing so
LoopMountedon:
/dev/loop1
Filetype is ISO
sudo mount /dev/loop1
mounting union!
Filesystem is vfat
mount: wrong fs type, bad option, bad superblock on none,
missing codepage or helper program, or other error
(for several filesystems (e.g. nfs, cifs) you might
need a /sbin/mount.<type> helper program)
In some cases useful info is found in syslog - try
dmesg | tail or so
[------------------------------]{ App start }[---------------------------------]
/usr/pandora/scripts/pnd_run.sh: line 37: ././run.sh: No such file or directory
[-------------------------------]{ App end }[----------------------------------]
umount: /mnt/utmp/gargoyle: not mounted
cleanup done
not mounted on loop yet, doing so
LoopMountedon:
/dev/loop1
Filetype is ISO
sudo mount /dev/loop1
mounting union!
Filesystem is vfat
mount: wrong fs type, bad option, bad superblock on none,
missing codepage or helper program, or other error
(for several filesystems (e.g. nfs, cifs) you might
need a /sbin/mount.<type> helper program)
In some cases useful info is found in syslog - try
dmesg | tail or so
[------------------------------]{ App start }[---------------------------------]
/usr/pandora/scripts/pnd_run.sh: line 37: ././run.sh: No such file or directory
[-------------------------------]{ App end }[----------------------------------]
umount: /mnt/utmp/gargoyle: not mounted
cleanup done
dmesg:
>[ 10.563629] NET: Registered protocol family 31
[ 10.563659] Bluetooth: HCI device and connection manager initialized
[ 10.563659] Bluetooth: HCI socket layer initialized
[ 10.566741] NET: Registered protocol family 2
[ 10.570556] Switched to high resolution mode on CPU 0
[ 10.633209] IP route cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 10.633789] TCP established hash table entries: 8192 (order: 4, 65536 bytes)
[ 10.634002] TCP bind hash table entries: 8192 (order: 3, 32768 bytes)
[ 10.634155] TCP: Hash tables configured (established 8192 bind 8192)
[ 10.634155] TCP reno registered
[ 10.656646] NET: Registered protocol family 1
[ 10.657958] NetWinder Floating Point Emulator V0.97 (double precision)
[ 10.660186] VFS: Disk quotas dquot_6.5.1
[ 10.660278] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 10.660797] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 10.662963] aufs 2-27
[ 10.662994] msgmni has been set to 485
[ 10.663085] io scheduler noop registered
[ 10.663085] io scheduler anticipatory registered (default)
[ 10.663116] io scheduler deadline registered
[ 10.663269] io scheduler cfq registered
[ 10.685180] Serial: 8250/16550 driver4 ports, IRQ sharing enabled
[ 10.707763] serial8250.0: ttyS0 at MMIO 0x49020000 (irq = 74) is a ST16654
[ 10.707824] console [ttyS0] enabled
[ 11.150695] brd: module loaded
[ 11.158538] loop: module loaded
[ 11.161712] pndctrl loaded.
[ 11.165130] usbcore: registered new interface driver asix
[ 11.170806] usbcore: registered new interface driver cdc_ether
[ 11.176940] usbcore: registered new interface driver rndis_host
[ 11.182983] i2c /dev entries driver
[ 11.188476] input: power-button as /devices/virtual/input/input0
[ 11.219116] triton2 power button driver initialized
[ 11.225677] Driver 'sd' needs updating - please use bus_type methods
[ 11.232604] omap2-nand driver initializing
[ 11.237884] NAND device: Manufacturer ID: 0x2c, Chip ID: 0xbc (Micron NAND 512MiB 1,8V 16-bit)
[ 11.247039] cmdlinepart partition parsing not available
[ 11.252349] Creating 5 MTD partitions on "omap2-nand":
[ 11.257537] 0x00000000-0x00080000 : "xloader"
[ 11.262817] 0x00080000-0x00260000 : "uboot"
[ 11.268310] 0x00260000-0x00280000 : "uboot-env"
[ 11.273437] 0x00280000-0x00c80000 : "boot"
[ 11.282226] 0x00c80000-0x20000000 : "rootfs"
[ 11.492797] UBI: attaching mtd4 to ubi0
[ 11.496673] UBI: physical eraseblock size: 131072 bytes (128 KiB)
[ 11.503021] UBI: logical eraseblock size: 129024 bytes
[ 11.508483] UBI: smallest flash I/O unit: 2048
[ 11.513214] UBI: sub-page size: 512
[ 11.517883] UBI: VID header offset: 512 (aligned 512)
[ 11.523773] UBI: data offset: 2048
[ 12.772338] UBI: attached mtd4 to ubi0
[ 12.776184] UBI: MTD device name: "rootfs"
[ 12.781280] UBI: MTD device size: 499 MiB
[ 12.786285] UBI: number of good PEBs: 3990
[ 12.791046] UBI: number of bad PEBs: 6
[ 12.795501] UBI: max. allowed volumes: 128
[ 12.800170] UBI: wear-leveling threshold: 4096
[ 12.804931] UBI: number of internal volumes: 1
[ 12.809417] UBI: number of user volumes: 1
[ 12.813903] UBI: available PEBs: 0
[ 12.818359] UBI: total number of reserved PEBs: 3990
[ 12.823394] UBI: number of PEBs reserved for bad PEB handling: 39
[ 12.829528] UBI: max/mean erase counter: 8/2
[ 12.833831] UBI: image sequence number: 384558657
[ 12.838623] UBI: attaching mtd3 to ubi1
[ 12.842468] UBI: physical eraseblock size: 131072 bytes (128 KiB)
[ 12.848815] UBI: logical eraseblock size: 129024 bytes
[ 12.854278] UBI: smallest flash I/O unit: 2048
[ 12.859008] UBI: sub-page size: 512
[ 12.863677] UBI: VID header offset: 512 (aligned 512)
[ 12.869567] UBI: data offset: 2048
[ 12.876464] UBI: background thread "ubi_bgt0d" started, PID 355
[ 12.919250] UBI: attached mtd3 to ubi1
[ 12.923095] UBI: MTD device name: "boot"
[ 12.928009] UBI: MTD device size: 10 MiB
[ 12.932952] UBI: number of good PEBs: 80
[ 12.937500] UBI: number of bad PEBs: 0
[ 12.941986] UBI: max. allowed volumes: 128
[ 12.946655] UBI: wear-leveling threshold: 4096
[ 12.951385] UBI: number of internal volumes: 1
[ 12.955902] UBI: number of user volumes: 1
[ 12.960357] UBI: available PEBs: 0
[ 12.964843] UBI: total number of reserved PEBs: 80
[ 12.969696] UBI: number of PEBs reserved for bad PEB handling: 2
[ 12.975738] UBI: max/mean erase counter: 4/2
[ 12.980041] UBI: image sequence number: 855480091
[ 12.984832] usbmon: debugfs is not available
[ 12.989501] ehci-omap ehci-omap.0: OMAP-EHCI Host Controller
[ 12.995391] UBI: background thread "ubi_bgt1d" started, PID 358
[ 13.001647] ehci-omap ehci-omap.0: new USB bus registered, assigned bus number 1
[ 13.009521] ehci-omap ehci-omap.0: irq 77, io mem 0x48064800
[ 13.023651] ehci-omap ehci-omap.0: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 13.031829] usb usb1: configuration #1 chosen from 1 choice
[ 13.037780] hub 1-0:1.0: USB hub found
[ 13.041687] hub 1-0:1.0: 3 ports detected
[ 13.149932] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 13.156799] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 13.164093] usb usb1: Product: OMAP-EHCI Host Controller
[ 13.169464] usb usb1: Manufacturer: Linux 2.6.27.46-omap1 ehci_hcd
[ 13.175689] usb usb1: SerialNumber: ehci-omap.0
[ 13.180541] Initializing USB Mass Storage driver...
[ 13.185729] usbcore: registered new interface driver usb-storage
[ 13.191833] USB Mass Storage support registered.
[ 13.196777] usbcore: registered new interface driver libusual
[ 13.203125] mice: PS/2 mouse device common for all mice
[ 13.227783] input: gpio-keys as /devices/platform/gpio-keys/input/input1
[ 13.313720] input: keypad as /devices/platform/i2c_omap.1/i2c-adapter/i2c-1/1-004a/twl4030_keypad/input/input2
[ 13.377319] input: nub0 as /devices/platform/i2c_omap.3/i2c-adapter/i2c-3/3-0066/input/input3
[ 13.438507] input: nub1 as /devices/platform/i2c_omap.3/i2c-adapter/i2c-3/3-0067/input/input4
[ 13.501220] twl4030_rtc twl4030_rtc: rtc core: registered twl4030_rtc as rtc0
[ 13.512329] bq27x00-battery 3-0055: support ver. 1.1.0 enabled
[ 13.518585] Bluetooth: HCI UART driver ver 2.2
[ 13.523071] Bluetooth: HCI H4 protocol initialized
[ 13.527954] Bluetooth: HCILL protocol initialized
[ 13.532775] hci_h4p hci_h4p: Registering HCI H4P device
[ 13.688659] mmci-omap mmci-omap.0: Failed to get debounce clock
[ 13.797241] mmci-omap mmci-omap.1: Failed to get debounce clock
[ 13.798248] mmci-omap mmci-omap.2: Failed to get debounce clock
[ 13.799072] Registered led device: pandora::sd1
[ 13.803955] Registered led device: pandora::sd2
[ 13.808837] Registered led device: pandora::bluetooth
[ 13.814239] Registered led device: pandora::wifi
[ 13.819702] Registered led device: pandora::keypad_bl
[ 13.825164] Registered led device: pandora:
ower
[ 13.830627] Registered led device: pandora::charger
[ 13.836059] usbcore: registered new interface driver usbhid
[ 13.841735] usbhid: v2.6:USB HID core driver
[ 13.846405] Advanced Linux Sound Architecture Driver Version 1.0.17.
[ 13.853240] ASoC version 0.13.2
[ 13.856658] OMAP3 Pandora SoC init
[ 13.860504] TWL4030 Audio Codec init
[ 13.865692] asoc: twl4030 <-> omap-mcbsp-dai-0 mapping ok
[ 13.872650] asoc: twl4030 <-> omap-mcbsp-dai-1 mapping ok
[ 13.887054] ALSA device list:
[ 13.890045] #0: omap3pandora (twl4030)
[ 13.894317] TCP cubic registered
[ 13.897552] NET: Registered protocol family 17
[ 13.902099] NET: Registered protocol family 15
[ 13.906646] Bluetooth: L2CAP ver 2.11
[ 13.910339] Bluetooth: L2CAP socket layer initialized
[ 13.915466] Bluetooth: SCO (Voice Link) ver 0.6
[ 13.920013] Bluetooth: SCO socket layer initialized
[ 13.925109] Bluetooth: RFCOMM socket layer initialized
[ 13.930358] Bluetooth: RFCOMM TTY layer initialized
[ 13.935272] Bluetooth: RFCOMM ver 1.10
[ 13.939086] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 13.944458] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
[ 13.950958] RPC: Registered udp transport module.
[ 13.955749] RPC: Registered tcp transport module.
[ 13.960510] ThumbEE CPU extension supported.
[ 13.964874] Disabling unused clock "sr2_fck"
[ 13.964874] Disabling unused clock "sr1_fck"
[ 13.964904] Disabling unused clock "mcbsp_fck"
[ 13.964904] Disabling unused clock "mcbsp_fck"
[ 13.964935] Disabling unused clock "mcbsp_fck"
[ 13.964935] Disabling unused clock "mcbsp_ick"
[ 13.964935] Disabling unused clock "mcbsp_ick"
[ 13.964965] Disabling unused clock "mcbsp_ick"
[ 13.964965] Disabling unused clock "gpt2_ick"
[ 13.964996] Disabling unused clock "gpt3_ick"
[ 13.964996] Disabling unused clock "gpt4_ick"
[ 13.965026] Disabling unused clock "gpt5_ick"
[ 13.965026] Disabling unused clock "gpt6_ick"
[ 13.965057] Disabling unused clock "gpt7_ick"
[ 13.965057] Disabling unused clock "gpt8_ick"
[ 13.965057] Disabling unused clock "gpt9_ick"
[ 13.965087] Disabling unused clock "wdt3_ick"
[ 13.965087] Disabling unused clock "wdt3_fck"
[ 13.965118] Disabling unused clock "gpio2_dbck"
[ 13.965118] Disabling unused clock "gpio3_dbck"
[ 13.965148] Disabling unused clock "gpio5_dbck"
[ 13.965148] Disabling unused clock "gpt9_fck"
[ 13.965179] Disabling unused clock "gpt8_fck"
[ 13.965179] Disabling unused clock "gpt7_fck"
[ 13.965209] Disabling unused clock "gpt6_fck"
[ 13.965209] Disabling unused clock "gpt5_fck"
[ 13.965240] Disabling unused clock "gpt4_fck"
[ 13.965240] Disabling unused clock "gpt3_fck"
[ 13.965240] Disabling unused clock "gpt2_fck"
[ 13.965270] Disabling unused clock "gpt1_ick"
[ 13.965270] Disabling unused clock "wdt1_ick"
[ 13.965301] Disabling unused clock "wdt2_ick"
[ 13.965301] Disabling unused clock "wdt2_fck"
[ 13.965332] Disabling unused clock "gpio1_dbck"
[ 13.965332] Disabling unused clock "gpt1_fck"
[ 13.965362] Disabling unused clock "cam_ick"
[ 13.965362] Disabling unused clock "cam_mclk"
[ 13.965393] Disabling unused clock "des1_ick"
[ 13.965393] Disabling unused clock "sha11_ick"
[ 13.965393] Disabling unused clock "rng_ick"
[ 13.965423] Disabling unused clock "aes1_ick"
[ 13.965423] Disabling unused clock "ssi_ick"
[ 13.965454] Disabling unused clock "mailboxes_ick"
[ 13.965454] Disabling unused clock "mcbsp_ick"
[ 13.965484] Disabling unused clock "mcbsp_ick"
[ 13.965484] Disabling unused clock "gpt10_ick"
[ 13.965484] Disabling unused clock "gpt11_ick"
[ 13.965515] Disabling unused clock "uart2_ick"
[ 13.965515] Disabling unused clock "i2c_ick"
[ 13.965545] Disabling unused clock "hdq_ick"
[ 13.965545] Disabling unused clock "mspro_ick"
[ 13.965576] Disabling unused clock "des2_ick"
[ 13.965576] Disabling unused clock "sha12_ick"
[ 13.965606] Disabling unused clock "aes2_ick"
[ 13.965606] Disabling unused clock "icr_ick"
[ 13.965606] Disabling unused clock "pka_ick"
[ 13.965637] Disabling unused clock "ssi_ssr_fck"
[ 13.965637] Disabling unused clock "hdq_fck"
[ 13.965667] Disabling unused clock "uart2_fck"
[ 13.965667] Disabling unused clock "mcbsp_fck"
[ 13.965698] Disabling unused clock "mcbsp_fck"
[ 13.965698] Disabling unused clock "i2c_fck"
[ 13.965728] Disabling unused clock "mspro_fck"
[ 13.965728] Disabling unused clock "gpt11_fck"
[ 13.965759] Disabling unused clock "gpt10_fck"
[ 13.965759] Disabling unused clock "iva2_ck"
[ 13.965789] Disabling unused clock "dpll4_m6x2_ck"
[ 13.965789] Disabling unused clock "dpll4_m5x2_ck"
[ 13.965820] Disabling unused clock "dpll3_m3x2_ck"
[ 13.965820] Disabling unused clock "sys_clkout1"
[ 13.965850] VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 1
[ 14.005676] Console: switching to colour frame buffer device 100x30
[ 14.190124] twl4030_rtc twl4030_rtc: setting system clock to 2010-08-27 08:39:30 UTC (1282898370)
[ 14.297454] UBIFS: mounted UBI device 0, volume 0, name "rootfs"
[ 14.303527] UBIFS: file system size: 507838464 bytes (495936 KiB, 484 MiB, 3936 LEBs)
[ 14.311614] UBIFS: journal size: 9033728 bytes (8822 KiB, 8 MiB, 71 LEBs)
[ 14.318969] UBIFS: media format: w4/r0 (latest is w4/r0)
[ 14.324859] UBIFS: default compressor: lzo
[ 14.329010] UBIFS: reserved for root: 0 bytes (0 KiB)
[ 14.335449] VFS: Mounted root (ubifs filesystem).
[ 14.340362] Freeing init memory: 148K
[ 14.717987] mmc0: host does not support reading read-only switch. assuming write-enable.
[ 14.726196] mmc0: new high speed SDHC card at address 0007
[ 14.732452] mmcblk0: mmc0:0007 SD16G 15593472KiB
[ 14.737487] mmcblk0: p1
[ 20.784271] ads7846 spi1.0: touchscreen, irq 254
[ 20.789611] input: touchscreen as /devices/platform/omap2_mcspi.1/spi1.0/input/input5
[ 25.644805] FAT: bogus number of reserved sectors
[ 25.649597] VFS: Can't find a valid FAT filesystem on dev mmcblk0.
[ 25.891448] FAT: bogus number of reserved sectors
[ 25.896179] VFS: Can't find a valid FAT filesystem on dev mmcblk0.
[ 26.761383] NET: Registered protocol family 10
[ 26.991394] UBIFS: mounted UBI device 1, volume 0, name "boot"
[ 26.997344] UBIFS: file system size: 8386560 bytes (8190 KiB, 7 MiB, 65 LEBs)
[ 27.004699] UBIFS: journal size: 1032193 bytes (1008 KiB, 0 MiB, 6 LEBs)
[ 27.011993] UBIFS: media format: w4/r0 (latest is w4/r0)
[ 27.017883] UBIFS: default compressor: lzo
[ 27.022003] UBIFS: reserved for root: 396117 bytes (386 KiB)
[ 27.672729] input: nub0 as /devices/platform/i2c_omap.3/i2c-adapter/i2c-3/3-0066/input/input6
[ 27.914947] input: nub1 as /devices/platform/i2c_omap.3/i2c-adapter/i2c-3/3-0067/input/input7
[ 73.846282] ISO 9660 Extensions: RRIP_1991A
[ 73.968658] aufs test_add:243:mount[1574]: uid/gid/perm /mnt/pnd/gargoyle 1000/1000/0755, 0/0/0777
[ 74.337799] mmci-omap mmci-omap.0: MMC IRQ 0x108000 : ERRI DTO
[ 74.337860] mmcblk0: error -110 transferring data
[ 74.425933] mmci-omap mmci-omap.0: MMC IRQ 0x108000 : ERRI DTO
[ 74.425994] end_request: I/O error, dev mmcblk0, sector 5195522
[ 74.431945] Buffer I/O error on device mmcblk0p1, logical block 5187330
[ 74.438598] lost page write due to I/O error on mmcblk0p1
[ 74.444335] mmci-omap mmci-omap.0: MMC IRQ 0x20018000 : ERRI CTO CERR
[ 74.445404] Spurious DMA IRQ
[ 74.448364] mmcblk0: error -110 sending read/write command
[ 74.453918] mmcblk0: error -110 transferring data
[ 74.458892] mmci-omap mmci-omap.0: MMC IRQ 0x108000 : ERRI DTO
[ 74.458923] end_request: I/O error, dev mmcblk0, sector 22930240
[ 74.464965] Buffer I/O error on device mmcblk0p1, logical block 22922048
[ 74.471710] lost page write due to I/O error on mmcblk0p1
[ 74.477233] aufs au_xino_create:642:mount[1574]: unlink /media/SD1/pandora/appdata/gargoyle/.aufs.xino(-5)
[ 74.710510] mmci-omap mmci-omap.0: MMC IRQ 0x18000 : ERRI CTO
[ 74.710601] mmcblk0: error -110 sending read/write command
[ 74.716186] mmcblk0: error -110 transferring data
[ 74.720977] end_request: I/O error, dev mmcblk0, sector 22930240
[ 142.526214] keyboard.c: can't emulate rawmode for keycode 185
[ 142.674407] keyboard.c: can't emulate rawmode for keycode 185
[ 10.563659] Bluetooth: HCI device and connection manager initialized
[ 10.563659] Bluetooth: HCI socket layer initialized
[ 10.566741] NET: Registered protocol family 2
[ 10.570556] Switched to high resolution mode on CPU 0
[ 10.633209] IP route cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 10.633789] TCP established hash table entries: 8192 (order: 4, 65536 bytes)
[ 10.634002] TCP bind hash table entries: 8192 (order: 3, 32768 bytes)
[ 10.634155] TCP: Hash tables configured (established 8192 bind 8192)
[ 10.634155] TCP reno registered
[ 10.656646] NET: Registered protocol family 1
[ 10.657958] NetWinder Floating Point Emulator V0.97 (double precision)
[ 10.660186] VFS: Disk quotas dquot_6.5.1
[ 10.660278] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 10.660797] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 10.662963] aufs 2-27
[ 10.662994] msgmni has been set to 485
[ 10.663085] io scheduler noop registered
[ 10.663085] io scheduler anticipatory registered (default)
[ 10.663116] io scheduler deadline registered
[ 10.663269] io scheduler cfq registered
[ 10.685180] Serial: 8250/16550 driver4 ports, IRQ sharing enabled
[ 10.707763] serial8250.0: ttyS0 at MMIO 0x49020000 (irq = 74) is a ST16654
[ 10.707824] console [ttyS0] enabled
[ 11.150695] brd: module loaded
[ 11.158538] loop: module loaded
[ 11.161712] pndctrl loaded.
[ 11.165130] usbcore: registered new interface driver asix
[ 11.170806] usbcore: registered new interface driver cdc_ether
[ 11.176940] usbcore: registered new interface driver rndis_host
[ 11.182983] i2c /dev entries driver
[ 11.188476] input: power-button as /devices/virtual/input/input0
[ 11.219116] triton2 power button driver initialized
[ 11.225677] Driver 'sd' needs updating - please use bus_type methods
[ 11.232604] omap2-nand driver initializing
[ 11.237884] NAND device: Manufacturer ID: 0x2c, Chip ID: 0xbc (Micron NAND 512MiB 1,8V 16-bit)
[ 11.247039] cmdlinepart partition parsing not available
[ 11.252349] Creating 5 MTD partitions on "omap2-nand":
[ 11.257537] 0x00000000-0x00080000 : "xloader"
[ 11.262817] 0x00080000-0x00260000 : "uboot"
[ 11.268310] 0x00260000-0x00280000 : "uboot-env"
[ 11.273437] 0x00280000-0x00c80000 : "boot"
[ 11.282226] 0x00c80000-0x20000000 : "rootfs"
[ 11.492797] UBI: attaching mtd4 to ubi0
[ 11.496673] UBI: physical eraseblock size: 131072 bytes (128 KiB)
[ 11.503021] UBI: logical eraseblock size: 129024 bytes
[ 11.508483] UBI: smallest flash I/O unit: 2048
[ 11.513214] UBI: sub-page size: 512
[ 11.517883] UBI: VID header offset: 512 (aligned 512)
[ 11.523773] UBI: data offset: 2048
[ 12.772338] UBI: attached mtd4 to ubi0
[ 12.776184] UBI: MTD device name: "rootfs"
[ 12.781280] UBI: MTD device size: 499 MiB
[ 12.786285] UBI: number of good PEBs: 3990
[ 12.791046] UBI: number of bad PEBs: 6
[ 12.795501] UBI: max. allowed volumes: 128
[ 12.800170] UBI: wear-leveling threshold: 4096
[ 12.804931] UBI: number of internal volumes: 1
[ 12.809417] UBI: number of user volumes: 1
[ 12.813903] UBI: available PEBs: 0
[ 12.818359] UBI: total number of reserved PEBs: 3990
[ 12.823394] UBI: number of PEBs reserved for bad PEB handling: 39
[ 12.829528] UBI: max/mean erase counter: 8/2
[ 12.833831] UBI: image sequence number: 384558657
[ 12.838623] UBI: attaching mtd3 to ubi1
[ 12.842468] UBI: physical eraseblock size: 131072 bytes (128 KiB)
[ 12.848815] UBI: logical eraseblock size: 129024 bytes
[ 12.854278] UBI: smallest flash I/O unit: 2048
[ 12.859008] UBI: sub-page size: 512
[ 12.863677] UBI: VID header offset: 512 (aligned 512)
[ 12.869567] UBI: data offset: 2048
[ 12.876464] UBI: background thread "ubi_bgt0d" started, PID 355
[ 12.919250] UBI: attached mtd3 to ubi1
[ 12.923095] UBI: MTD device name: "boot"
[ 12.928009] UBI: MTD device size: 10 MiB
[ 12.932952] UBI: number of good PEBs: 80
[ 12.937500] UBI: number of bad PEBs: 0
[ 12.941986] UBI: max. allowed volumes: 128
[ 12.946655] UBI: wear-leveling threshold: 4096
[ 12.951385] UBI: number of internal volumes: 1
[ 12.955902] UBI: number of user volumes: 1
[ 12.960357] UBI: available PEBs: 0
[ 12.964843] UBI: total number of reserved PEBs: 80
[ 12.969696] UBI: number of PEBs reserved for bad PEB handling: 2
[ 12.975738] UBI: max/mean erase counter: 4/2
[ 12.980041] UBI: image sequence number: 855480091
[ 12.984832] usbmon: debugfs is not available
[ 12.989501] ehci-omap ehci-omap.0: OMAP-EHCI Host Controller
[ 12.995391] UBI: background thread "ubi_bgt1d" started, PID 358
[ 13.001647] ehci-omap ehci-omap.0: new USB bus registered, assigned bus number 1
[ 13.009521] ehci-omap ehci-omap.0: irq 77, io mem 0x48064800
[ 13.023651] ehci-omap ehci-omap.0: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 13.031829] usb usb1: configuration #1 chosen from 1 choice
[ 13.037780] hub 1-0:1.0: USB hub found
[ 13.041687] hub 1-0:1.0: 3 ports detected
[ 13.149932] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 13.156799] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 13.164093] usb usb1: Product: OMAP-EHCI Host Controller
[ 13.169464] usb usb1: Manufacturer: Linux 2.6.27.46-omap1 ehci_hcd
[ 13.175689] usb usb1: SerialNumber: ehci-omap.0
[ 13.180541] Initializing USB Mass Storage driver...
[ 13.185729] usbcore: registered new interface driver usb-storage
[ 13.191833] USB Mass Storage support registered.
[ 13.196777] usbcore: registered new interface driver libusual
[ 13.203125] mice: PS/2 mouse device common for all mice
[ 13.227783] input: gpio-keys as /devices/platform/gpio-keys/input/input1
[ 13.313720] input: keypad as /devices/platform/i2c_omap.1/i2c-adapter/i2c-1/1-004a/twl4030_keypad/input/input2
[ 13.377319] input: nub0 as /devices/platform/i2c_omap.3/i2c-adapter/i2c-3/3-0066/input/input3
[ 13.438507] input: nub1 as /devices/platform/i2c_omap.3/i2c-adapter/i2c-3/3-0067/input/input4
[ 13.501220] twl4030_rtc twl4030_rtc: rtc core: registered twl4030_rtc as rtc0
[ 13.512329] bq27x00-battery 3-0055: support ver. 1.1.0 enabled
[ 13.518585] Bluetooth: HCI UART driver ver 2.2
[ 13.523071] Bluetooth: HCI H4 protocol initialized
[ 13.527954] Bluetooth: HCILL protocol initialized
[ 13.532775] hci_h4p hci_h4p: Registering HCI H4P device
[ 13.688659] mmci-omap mmci-omap.0: Failed to get debounce clock
[ 13.797241] mmci-omap mmci-omap.1: Failed to get debounce clock
[ 13.798248] mmci-omap mmci-omap.2: Failed to get debounce clock
[ 13.799072] Registered led device: pandora::sd1
[ 13.803955] Registered led device: pandora::sd2
[ 13.808837] Registered led device: pandora::bluetooth
[ 13.814239] Registered led device: pandora::wifi
[ 13.819702] Registered led device: pandora::keypad_bl
[ 13.825164] Registered led device: pandora:
ower[ 13.830627] Registered led device: pandora::charger
[ 13.836059] usbcore: registered new interface driver usbhid
[ 13.841735] usbhid: v2.6:USB HID core driver
[ 13.846405] Advanced Linux Sound Architecture Driver Version 1.0.17.
[ 13.853240] ASoC version 0.13.2
[ 13.856658] OMAP3 Pandora SoC init
[ 13.860504] TWL4030 Audio Codec init
[ 13.865692] asoc: twl4030 <-> omap-mcbsp-dai-0 mapping ok
[ 13.872650] asoc: twl4030 <-> omap-mcbsp-dai-1 mapping ok
[ 13.887054] ALSA device list:
[ 13.890045] #0: omap3pandora (twl4030)
[ 13.894317] TCP cubic registered
[ 13.897552] NET: Registered protocol family 17
[ 13.902099] NET: Registered protocol family 15
[ 13.906646] Bluetooth: L2CAP ver 2.11
[ 13.910339] Bluetooth: L2CAP socket layer initialized
[ 13.915466] Bluetooth: SCO (Voice Link) ver 0.6
[ 13.920013] Bluetooth: SCO socket layer initialized
[ 13.925109] Bluetooth: RFCOMM socket layer initialized
[ 13.930358] Bluetooth: RFCOMM TTY layer initialized
[ 13.935272] Bluetooth: RFCOMM ver 1.10
[ 13.939086] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 13.944458] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
[ 13.950958] RPC: Registered udp transport module.
[ 13.955749] RPC: Registered tcp transport module.
[ 13.960510] ThumbEE CPU extension supported.
[ 13.964874] Disabling unused clock "sr2_fck"
[ 13.964874] Disabling unused clock "sr1_fck"
[ 13.964904] Disabling unused clock "mcbsp_fck"
[ 13.964904] Disabling unused clock "mcbsp_fck"
[ 13.964935] Disabling unused clock "mcbsp_fck"
[ 13.964935] Disabling unused clock "mcbsp_ick"
[ 13.964935] Disabling unused clock "mcbsp_ick"
[ 13.964965] Disabling unused clock "mcbsp_ick"
[ 13.964965] Disabling unused clock "gpt2_ick"
[ 13.964996] Disabling unused clock "gpt3_ick"
[ 13.964996] Disabling unused clock "gpt4_ick"
[ 13.965026] Disabling unused clock "gpt5_ick"
[ 13.965026] Disabling unused clock "gpt6_ick"
[ 13.965057] Disabling unused clock "gpt7_ick"
[ 13.965057] Disabling unused clock "gpt8_ick"
[ 13.965057] Disabling unused clock "gpt9_ick"
[ 13.965087] Disabling unused clock "wdt3_ick"
[ 13.965087] Disabling unused clock "wdt3_fck"
[ 13.965118] Disabling unused clock "gpio2_dbck"
[ 13.965118] Disabling unused clock "gpio3_dbck"
[ 13.965148] Disabling unused clock "gpio5_dbck"
[ 13.965148] Disabling unused clock "gpt9_fck"
[ 13.965179] Disabling unused clock "gpt8_fck"
[ 13.965179] Disabling unused clock "gpt7_fck"
[ 13.965209] Disabling unused clock "gpt6_fck"
[ 13.965209] Disabling unused clock "gpt5_fck"
[ 13.965240] Disabling unused clock "gpt4_fck"
[ 13.965240] Disabling unused clock "gpt3_fck"
[ 13.965240] Disabling unused clock "gpt2_fck"
[ 13.965270] Disabling unused clock "gpt1_ick"
[ 13.965270] Disabling unused clock "wdt1_ick"
[ 13.965301] Disabling unused clock "wdt2_ick"
[ 13.965301] Disabling unused clock "wdt2_fck"
[ 13.965332] Disabling unused clock "gpio1_dbck"
[ 13.965332] Disabling unused clock "gpt1_fck"
[ 13.965362] Disabling unused clock "cam_ick"
[ 13.965362] Disabling unused clock "cam_mclk"
[ 13.965393] Disabling unused clock "des1_ick"
[ 13.965393] Disabling unused clock "sha11_ick"
[ 13.965393] Disabling unused clock "rng_ick"
[ 13.965423] Disabling unused clock "aes1_ick"
[ 13.965423] Disabling unused clock "ssi_ick"
[ 13.965454] Disabling unused clock "mailboxes_ick"
[ 13.965454] Disabling unused clock "mcbsp_ick"
[ 13.965484] Disabling unused clock "mcbsp_ick"
[ 13.965484] Disabling unused clock "gpt10_ick"
[ 13.965484] Disabling unused clock "gpt11_ick"
[ 13.965515] Disabling unused clock "uart2_ick"
[ 13.965515] Disabling unused clock "i2c_ick"
[ 13.965545] Disabling unused clock "hdq_ick"
[ 13.965545] Disabling unused clock "mspro_ick"
[ 13.965576] Disabling unused clock "des2_ick"
[ 13.965576] Disabling unused clock "sha12_ick"
[ 13.965606] Disabling unused clock "aes2_ick"
[ 13.965606] Disabling unused clock "icr_ick"
[ 13.965606] Disabling unused clock "pka_ick"
[ 13.965637] Disabling unused clock "ssi_ssr_fck"
[ 13.965637] Disabling unused clock "hdq_fck"
[ 13.965667] Disabling unused clock "uart2_fck"
[ 13.965667] Disabling unused clock "mcbsp_fck"
[ 13.965698] Disabling unused clock "mcbsp_fck"
[ 13.965698] Disabling unused clock "i2c_fck"
[ 13.965728] Disabling unused clock "mspro_fck"
[ 13.965728] Disabling unused clock "gpt11_fck"
[ 13.965759] Disabling unused clock "gpt10_fck"
[ 13.965759] Disabling unused clock "iva2_ck"
[ 13.965789] Disabling unused clock "dpll4_m6x2_ck"
[ 13.965789] Disabling unused clock "dpll4_m5x2_ck"
[ 13.965820] Disabling unused clock "dpll3_m3x2_ck"
[ 13.965820] Disabling unused clock "sys_clkout1"
[ 13.965850] VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 1
[ 14.005676] Console: switching to colour frame buffer device 100x30
[ 14.190124] twl4030_rtc twl4030_rtc: setting system clock to 2010-08-27 08:39:30 UTC (1282898370)
[ 14.297454] UBIFS: mounted UBI device 0, volume 0, name "rootfs"
[ 14.303527] UBIFS: file system size: 507838464 bytes (495936 KiB, 484 MiB, 3936 LEBs)
[ 14.311614] UBIFS: journal size: 9033728 bytes (8822 KiB, 8 MiB, 71 LEBs)
[ 14.318969] UBIFS: media format: w4/r0 (latest is w4/r0)
[ 14.324859] UBIFS: default compressor: lzo
[ 14.329010] UBIFS: reserved for root: 0 bytes (0 KiB)
[ 14.335449] VFS: Mounted root (ubifs filesystem).
[ 14.340362] Freeing init memory: 148K
[ 14.717987] mmc0: host does not support reading read-only switch. assuming write-enable.
[ 14.726196] mmc0: new high speed SDHC card at address 0007
[ 14.732452] mmcblk0: mmc0:0007 SD16G 15593472KiB
[ 14.737487] mmcblk0: p1
[ 20.784271] ads7846 spi1.0: touchscreen, irq 254
[ 20.789611] input: touchscreen as /devices/platform/omap2_mcspi.1/spi1.0/input/input5
[ 25.644805] FAT: bogus number of reserved sectors
[ 25.649597] VFS: Can't find a valid FAT filesystem on dev mmcblk0.
[ 25.891448] FAT: bogus number of reserved sectors
[ 25.896179] VFS: Can't find a valid FAT filesystem on dev mmcblk0.
[ 26.761383] NET: Registered protocol family 10
[ 26.991394] UBIFS: mounted UBI device 1, volume 0, name "boot"
[ 26.997344] UBIFS: file system size: 8386560 bytes (8190 KiB, 7 MiB, 65 LEBs)
[ 27.004699] UBIFS: journal size: 1032193 bytes (1008 KiB, 0 MiB, 6 LEBs)
[ 27.011993] UBIFS: media format: w4/r0 (latest is w4/r0)
[ 27.017883] UBIFS: default compressor: lzo
[ 27.022003] UBIFS: reserved for root: 396117 bytes (386 KiB)
[ 27.672729] input: nub0 as /devices/platform/i2c_omap.3/i2c-adapter/i2c-3/3-0066/input/input6
[ 27.914947] input: nub1 as /devices/platform/i2c_omap.3/i2c-adapter/i2c-3/3-0067/input/input7
[ 73.846282] ISO 9660 Extensions: RRIP_1991A
[ 73.968658] aufs test_add:243:mount[1574]: uid/gid/perm /mnt/pnd/gargoyle 1000/1000/0755, 0/0/0777
[ 74.337799] mmci-omap mmci-omap.0: MMC IRQ 0x108000 : ERRI DTO
[ 74.337860] mmcblk0: error -110 transferring data
[ 74.425933] mmci-omap mmci-omap.0: MMC IRQ 0x108000 : ERRI DTO
[ 74.425994] end_request: I/O error, dev mmcblk0, sector 5195522
[ 74.431945] Buffer I/O error on device mmcblk0p1, logical block 5187330
[ 74.438598] lost page write due to I/O error on mmcblk0p1
[ 74.444335] mmci-omap mmci-omap.0: MMC IRQ 0x20018000 : ERRI CTO CERR
[ 74.445404] Spurious DMA IRQ
[ 74.448364] mmcblk0: error -110 sending read/write command
[ 74.453918] mmcblk0: error -110 transferring data
[ 74.458892] mmci-omap mmci-omap.0: MMC IRQ 0x108000 : ERRI DTO
[ 74.458923] end_request: I/O error, dev mmcblk0, sector 22930240
[ 74.464965] Buffer I/O error on device mmcblk0p1, logical block 22922048
[ 74.471710] lost page write due to I/O error on mmcblk0p1
[ 74.477233] aufs au_xino_create:642:mount[1574]: unlink /media/SD1/pandora/appdata/gargoyle/.aufs.xino(-5)
[ 74.710510] mmci-omap mmci-omap.0: MMC IRQ 0x18000 : ERRI CTO
[ 74.710601] mmcblk0: error -110 sending read/write command
[ 74.716186] mmcblk0: error -110 transferring data
[ 74.720977] end_request: I/O error, dev mmcblk0, sector 22930240
[ 142.526214] keyboard.c: can't emulate rawmode for keycode 185
[ 142.674407] keyboard.c: can't emulate rawmode for keycode 185
I already formatted it with the panasonic formatter.
Is my SD bad? Does anybody have the same problems? Anybody got any clues? It's not my pandora, as I had it with my first one, as well as with my replacement.
Please?
