Test the keymat!


Since I'm not great with photos/videos, I'll probably take it into work tomorrow so some of my coworkers can try it. Then I'll ship it back out at the end of the day!

The earlier recipients did a great job on the photos. Anything you can give for feedback from you or your friends is good.

I suspect that I'm the next one on the list (Nebraska). Can you IM me the tracking number?

Edited to add @edgex004 quote for relevance.
 
Last edited:
No, I think he's the second.
Hmm, I wonder what the hold up is then. . .
[doublepost=1501148983,1501128654][/doublepost]Can someone take a picture of the Shell next to the GPD Win? I swear there was one somewhere that someone took but I can't find it.
 
[doublepost=1501148983,1501128654][/doublepost]Can someone take a picture of the Shell next to the GPD Win? I swear there was one somewhere that someone took but I can't find it.

I have this one from last year GamesCom

MdnZhwPvGQ9g88Up4pHDd6XurzxlYjZ_MeJxELWh2K4y8_AoXdVJgPkSleg8MwRHwyjqekK8Ao7UZGWNd7_aF4SDBKArQN__Y9-KU2eC-zeX1YIhfanYSAFjwqDyfAPXC9Vu6dfO7UJ4ClSw53Tk_fLtw4FJkq7Efxva3z8HZyfjOeWbDWsBimzRf7VYfhiGoKXBFOWl2GfznpsDoeBNIdcOLL3UVjeTVeyGqX9aVNZr5DXvLhttE9lFhSft3q7CLoM7TcGjR97anOHS--OwYoI6hiUUEb3Nv_NuVafG7v5RG62NU-bb853rA0-AM5JkVojPOQN5Kzi4saX-VHzHrVcQhO2dnqjmdyh7A9J9BnUzXu-SwgllfZJRbhPsdvsncp7b_24Y5EibxefByuTjyS0saaUWS6SLSGR4lKAHM-mVj4Ctwv9zh0LEA0VfJwPnS9PzV4j8V_ak485mELtFwY7wTLVMibrvGyGr7qMxCQtSP2LNJL_5KXbnAMUFgiQDYbZPV7Sn3JSbRFqgig2_8QRKt3b_vcun18A9G_RXWwbWFpeViOJjvCwkmPiVyiQUitLsZWLcqKI-K8qh3CHodw0RF6D2ERPgV8k3mX3A4eiIQ8zgkMJJ-txh=w952-h536-no
 
Ah, thanks, but I thought there was a picture of them next to each other. I know the screen is bigger on the GPD, that was the main thing I was thinking about.
 
Seeing the back of the Pyra case I hope the edge around the connectors is far enough from the connector openings to not interfere with sometimes thick plastics around plugs. Especially the USB3 OTG port and micro HDMI look troublesome in that regard. It would be a shame if something stupid like that would prevent plugs from fitting in properly.
 
Sorry for the delay, but it shipped priority mail on Monday morning. Should arrive by today, but I'll try to find the tracking number to check on it.
 
Sorry for the delay, but it shipped priority mail on Monday morning. Should arrive by today, but I'll try to find the tracking number to check on it.
No worries - Just making sure it wasn't lost in the mail.
 
Seeing the back of the Pyra case I hope the edge around the connectors is far enough from the connector openings to not interfere with sometimes thick plastics around plugs. Especially the USB3 OTG port and micro HDMI look troublesome in that regard. It would be a shame if something stupid like that would prevent plugs from fitting in properly.
Do you mean the usb3/otg port and the micro HDMI port? I think those are on the left and right respectively on the picture, so it seems unlikely for plugs in those to foul each other. It seems to me the closest plugs would be in the other USB2 host port and the charging/USB debug port, if I'm remembering what they are correctly. It seems you may be limited to just one USB2 port and one USB3 micro port if charging at the same time, or you find a suitable adaptor for your bulky componentry to move it away from the charging port (assuming the plug supplied on the charger is not overly bulky).
 
Back
Top