Starting kernel ...
[    0.000000] Booting Linux on physical CPU 0x0
[    0.000000] Linux version 3.8.13-gcc16f99 (yoctouser@441a9713f538) (gcc version 4.7.3 20130226 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.03-20130313 - Linaro GCC 2013.03) ) #1 SMP PREEMPT Wed Jan 4 15:53:51 UTC 2023
[    0.000000] CPU: ARMv7 Processor [412fc0f2] revision 2 (ARMv7), cr=10c53c7d
[    0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
[    0.000000] Machine: OMAP5 Panda board, model: TI OMAP5 uEVM board
[    0.000000] cma: CMA: reserved 8 MiB at 95000000
[    0.000000] cma: CMA: reserved 168 MiB at 95800000
[    0.000000] cma: CMA: reserved 16 MiB at ae800000
[    0.000000] Memory policy: ECC disabled, Data cache writealloc
[    0.000000] OMAP5432 ES2.0
[    0.000000] PERCPU: Embedded 9 pages/cpu @c1f48000 s13568 r8192 d15104 u36864
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 515872
[    0.000000] Kernel command line: console=ttyO2,115200n8 vram=16M root=/dev/mmcblk0p2 rw rootfstype=ext4 rootwait
[    0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] __ex_table already sorted, skipping sort
[    0.000000] Memory: 2031MB = 2031MB total
[    0.000000] Memory: 1849828k/1849828k available, 230940k reserved, 1301504K highmem
[    0.000000] Virtual kernel memory layout:
[    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
[    0.000000]     fixmap  : 0xfff00000 - 0xfffe0000   ( 896 kB)
[    0.000000]     vmalloc : 0xf0000000 - 0xff000000   ( 240 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xef800000   ( 760 MB)
[    0.000000]     pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
[    0.000000]     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
[    0.000000]       .text : 0xc0008000 - 0xc08ad444   (8854 kB)
[    0.000000]       .init : 0xc08ae000 - 0xc090b500   ( 374 kB)
[    0.000000]       .data : 0xc090c000 - 0xc09db3f0   ( 829 kB)
[    0.000000]        .bss : 0xc09db3f0 - 0xc0f3bdf8   (5507 kB)
[    0.000000] Preemptible hierarchical RCU implementation.
[    0.000000] NR_IRQS:16 nr_irqs:16 16
[    0.000000] OMAP clockevent source: GPTIMER1 at 32768 Hz
[    0.000000] sched_clock: 32 bits at 32kHz, resolution 30517ns, wraps every 131071999ms
[    0.000000] OMAP clocksource: 32k_counter at 32768 Hz
[    0.000000] Architected local timer running at 6.14MHz (virt).
[    0.000000] Switching to timer-based delay loop
[    0.000000] Console: colour dummy device 80x30
[    0.000000] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar
[    0.000000] ... MAX_LOCKDEP_SUBCLASSES:  8
[    0.000000] ... MAX_LOCK_DEPTH:          48
[    0.000000] ... MAX_LOCKDEP_KEYS:        8191
[    0.000000] ... CLASSHASH_SIZE:          4096
[    0.000000] ... MAX_LOCKDEP_ENTRIES:     16384
[    0.000000] ... MAX_LOCKDEP_CHAINS:      32768
[    0.000000] ... CHAINHASH_SIZE:          16384
[    0.000000]  memory used by lock dependency info: 3695 kB
[    0.000000]  per task-struct memory footprint: 1152 bytes
[    0.000610] Calibrating delay loop (skipped), value calculated using timer frequency.. 12.30 BogoMIPS (lpj=48000)
[    0.000610] pid_max: default: 32768 minimum: 301
[    0.000915] Security Framework initialized
[    0.001007] Mount-cache hash table entries: 512
[    0.015563] CPU: Testing write buffer coherency: ok
[    0.016235] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[    0.016448] Setting up static identity map for 0x8060e370 - 0x8060e3e0
[    0.095764] CPU1: Booted secondary processor
[    0.095794] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[    0.096099] Brought up 2 CPUs
[    0.096099] SMP: Total of 2 processors activated (24.61 BogoMIPS).
[    0.097778] devtmpfs: initialized
[    0.114288] omap_hwmod: aess: _wait_target_disable failed
[    0.138214] omap_hwmod: dss_dispc: cannot be enabled for reset (3)
[    0.140380] omap_hwmod: dss_dsi1_a: cannot be enabled for reset (3)
[    0.142547] omap_hwmod: dss_dsi1_b: cannot be enabled for reset (3)
[    0.144683] omap_hwmod: dss_dsi1_c: cannot be enabled for reset (3)
[    0.146850] omap_hwmod: dss_hdmi: cannot be enabled for reset (3)
[    0.148986] omap_hwmod: dss_rfbi: cannot be enabled for reset (3)
[    0.197906] pinctrl core: initialized pinctrl subsystem
[    0.200622] regulator-dummy: no parameters
[    0.204498] NET: Registered protocol family 16
[    0.225006] DMA: preallocated 256 KiB pool for atomic coherent allocations
[    0.225494] omap-gpmc omap-gpmc: GPMC revision 6.0
[    0.225585] omap-gpmc omap-gpmc: failed to reserve memory
[    0.225616] omap-gpmc: probe of omap-gpmc failed with error -16
[    0.240936] OMAP GPIO hardware version 0.1
[    0.277984] No ATAGs?
[    0.278015] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
[    0.278015] hw-breakpoint: maximum watchpoint size is 8 bytes.
[    0.280731] OMAP DMA hardware revision 0.0
[    0.284240] pinctrl-single 4a002840.pinmux: 219 pins at pa fc002840 size 438
[    0.284851] pinctrl-single 4ae0c840.pinmux: 28 pins at pa fce0c840 size 56
[    0.324218] bio: create slab <bio-0> at 0
[    0.326202] edma-dma-engine edma-dma-engine.0: Can't allocate PaRAM dummy slot
[    0.326232] edma-dma-engine: probe of edma-dma-engine.0 failed with error -5
[    0.363403] omap-dma-engine 4a056000.dma-controller: OMAP DMA engine driver
[    0.364807] vmmcsd_fixed: 3000 mV
[    0.365447] vmmcwl_fixed: 1800 mV
[    0.366027] hsusb2_reset: 3300 mV
[    0.366516] hsusb3_reset: 3300 mV
[    0.374847] SCSI subsystem initialized
[    0.376434] usbcore: registered new interface driver usbfs
[    0.376678] usbcore: registered new interface driver hub
[    0.376953] usbcore: registered new device driver usb
[    0.379486] omap_i2c 48070000.i2c: did not get pins for i2c error: -19
[    0.380249] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz
[    0.384033] palmas 0-0048: Muxing GPIO 2, PWM 0, LED 0
[    0.384552] palmas 0-0048: Product ID c035
[    0.384765] palmas 0-0048: Product Design Rev 3
[    0.384948] palmas 0-0048: Product SW Rev a1
[    0.387542] smps123: 600 <--> 1500 mV at 1060 mV
[    0.389251] smps45: 600 <--> 1310 mV at 1030 mV
[    0.391418] smps6: 1200 mV
[    0.394378] smps7: 1800 mV
[    0.396118] smps8: 600 <--> 1310 mV at 1040 mV
[    0.398101] smps9: 2100 mV
[    0.399871] smps10: 5000 mV
[    0.400665] ldo1: 1500 <--> 1800 mV
[    0.402954] ldo2: 2800 mV
[    0.404663] ldo3: 1500 mV
[    0.405822] ldo4: 1500 <--> 1800 mV
[    0.407562] ldo5: 1800 mV
[    0.409271] ldo6: 1200 mV
[    0.410919] ldo7: 2000 mV
[    0.412658] ldo8: 3000 mV
[    0.414001] ldo9: 1800 <--> 3000 mV at 3000 mV
[    0.415740] ldoln: 1800 mV
[    0.417846] ldousb: 3250 mV
[    0.422607] omap_i2c 48072000.i2c: did not get pins for i2c error: -19
[    0.423095] omap_i2c 48072000.i2c: bus 1 rev0.12 at 100 kHz
[    0.423187] omap_i2c 48060000.i2c: did not get pins for i2c error: -19
[    0.423675] omap_i2c 48060000.i2c: bus 2 rev0.12 at 100 kHz
[    0.423767] omap_i2c 4807a000.i2c: did not get pins for i2c error: -19
[    0.424224] omap_i2c 4807a000.i2c: bus 3 rev0.12 at 100 kHz
[    0.424468] omap_i2c 4807c000.i2c: did not get pins for i2c error: -19
[    0.424926] omap_i2c 4807c000.i2c: bus 4 rev0.12 at 100 kHz
[    0.425964] Linux video capture interface: v2.00
[    0.427825] omap-iommu omap-iommu.0: mmu_dsp registered
[    0.427917] omap-iommu omap-iommu.1: mmu_ipu registered
[    0.428863] Advanced Linux Sound Architecture Driver Initialized.
[    0.430664] Bluetooth: Core ver 2.16
[    0.430877] NET: Registered protocol family 31
[    0.430877] Bluetooth: HCI device and connection manager initialized
[    0.430938] Bluetooth: HCI socket layer initialized
[    0.430969] Bluetooth: L2CAP socket layer initialized
[    0.430999] Bluetooth: SCO socket layer initialized
[    0.431121] Switching to clocksource arch_sys_counter
[    0.503051] NET: Registered protocol family 2
[    0.504089] TCP established hash table entries: 8192 (order: 4, 65536 bytes)
[    0.504394] TCP bind hash table entries: 8192 (order: 6, 294912 bytes)
[    0.507019] TCP: Hash tables configured (established 8192 bind 8192)
[    0.507141] TCP: reno registered
[    0.507171] UDP hash table entries: 512 (order: 3, 40960 bytes)
[    0.507507] UDP-Lite hash table entries: 512 (order: 3, 40960 bytes)
[    0.508239] NET: Registered protocol family 1
[    0.509002] RPC: Registered named UNIX socket transport module.
[    0.509033] RPC: Registered udp transport module.
[    0.509033] RPC: Registered tcp transport module.
[    0.509033] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    0.533966] NetWinder Floating Point Emulator V0.97 (double precision)
[    0.535491] platform omap-rproc.0: platform_device for rproc dsp created
[    0.535827] platform omap-rproc.1: platform_device for rproc ipu created
[    0.661193] bounce pool size: 64 pages
[    0.661560] VFS: Disk quotas dquot_6.5.2
[    0.661712] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    0.663391] NFS: Registering the id_resolver key type
[    0.663635] Key type id_resolver registered
[    0.663635] Key type id_legacy registered
[    0.663696] jffs2: version 2.2. (NAND) (SUMMARY)  © 2001-2006 Red Hat, Inc.
[    0.664123] msgmni has been set to 1454
[    0.665954] io scheduler noop registered
[    0.665985] io scheduler deadline registered
[    0.666046] io scheduler cfq registered (default)
[    0.669738] gpiochip_find_base: found new base at 488
[    0.670196] gpiochip_add: registered GPIOs 488 to 511 on device: tca6424a
[    0.672119] OMAP DSS rev 6.1
[    0.677276] of_get_named_gpio_flags exited with status 488
[    0.677307] of_get_named_gpio_flags exited with status 489
[    0.677337] of_get_named_gpio_flags exited with status 193
[    0.677368] of_get_named_gpio_flags exited with status 194
[    0.677368] of_get_named_gpio_flags exited with status 195
[    0.685607] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    0.689056] pinctrl core: add 1 pinmux maps
[    0.689086] pinctrl-single 4a002840.pinmux: found group selector 12 for pinmux_uart1_pins
[    0.689178] pinctrl-single 4a002840.pinmux: request pin 48 (4a0028a0) for 4806a000.serial
[    0.689178] pinctrl-single 4a002840.pinmux: request pin 49 (4a0028a2) for 4806a000.serial
[    0.689208] pinctrl-single 4a002840.pinmux: request pin 50 (4a0028a4) for 4806a000.serial
[    0.689208] pinctrl-single 4a002840.pinmux: request pin 51 (4a0028a6) for 4806a000.serial
[    0.689208] pinctrl-single 4a002840.pinmux: enabling pinmux_uart1_pins function12
[    0.689453] 4806a000.serial: ttyO0 at MMIO 0x4806a000 (irq = 104) is a OMAP UART0
[    0.690277] omap_uart 4806c000.serial: did not get pins for uart1 error: -19
[    0.690429] 4806c000.serial: ttyO1 at MMIO 0x4806c000 (irq = 105) is a OMAP UART1
[    0.691040] pinctrl core: add 1 pinmux maps
[    0.691040] pinctrl-single 4a002840.pinmux: found group selector 13 for pinmux_uart3_pins
[    0.691070] pinctrl-single 4a002840.pinmux: request pin 205 (4a0029da) for 48020000.serial
[    0.691070] pinctrl-single 4a002840.pinmux: request pin 206 (4a0029dc) for 48020000.serial
[    0.691101] pinctrl-single 4a002840.pinmux: enabling pinmux_uart3_pins function13
[    0.691223] 48020000.serial: ttyO2 at MMIO 0x48020000 (irq = 106) is a OMAP UART2
[    1.622467] console [ttyO2] enabled
[    1.626739] omap_uart 4806e000.serial: did not get pins for uart3 error: -19
[    1.634277] 4806e000.serial: ttyO3 at MMIO 0x4806e000 (irq = 102) is a OMAP UART3
[    1.642822] pinctrl core: add 1 pinmux maps
[    1.642822] pinctrl-single 4a002840.pinmux: found group selector 14 for pinmux_uart5_pins
[    1.642852] pinctrl-single 4a002840.pinmux: request pin 184 (4a0029b0) for 48066000.serial
[    1.642852] pinctrl-single 4a002840.pinmux: request pin 185 (4a0029b2) for 48066000.serial
[    1.642883] pinctrl-single 4a002840.pinmux: request pin 186 (4a0029b4) for 48066000.serial
[    1.642883] pinctrl-single 4a002840.pinmux: request pin 187 (4a0029b6) for 48066000.serial
[    1.642883] pinctrl-single 4a002840.pinmux: request pin 192 (4a0029c0) for 48066000.serial
[    1.642883] pinctrl-single 4a002840.pinmux: enabling pinmux_uart5_pins function14
[    1.643066] 48066000.serial: ttyO4 at MMIO 0x48066000 (irq = 137) is a OMAP UART4
[    1.651550] omap_uart 48068000.serial: did not get pins for uart5 error: -19
[    1.659088] 48068000.serial: ttyO5 at MMIO 0x48068000 (irq = 138) is a OMAP UART5
[    1.668640] [drm] Initialized drm 1.1.0 20060810
[    1.688354] brd: module loaded
[    1.700347] loop: module loaded
[    1.703948] (stk) :sysfs entries created
[    1.708160] (stk) : debugfs entries created
[    1.712982] gccore gccore.0: opp_get_opp_count: device OPP not found (-19)
[    1.740692] of_get_named_gpio_flags exited with status 141
[    1.746368] palmas-pwm palmas_pwm.35: there are no PWMs muxed
[    1.752502] palmas-pwm: probe of palmas_pwm.35 failed with error -22
[    1.762481] mtdoops: mtd device (mtddev=name/number) must be supplied
[    1.769927] OneNAND driver initializing
[    1.774444] omap2_mcspi 48098000.spi: pins are not configured from the driver
[    1.782684] pinctrl core: add 1 pinmux maps
[    1.782714] pinctrl-single 4a002840.pinmux: found group selector 15 for pinmux_mcspi2_pins
[    1.782745] pinctrl-single 4a002840.pinmux: request pin 94 (4a0028fc) for 4809a000.spi
[    1.782745] pinctrl-single 4a002840.pinmux: request pin 95 (4a0028fe) for 4809a000.spi
[    1.782745] pinctrl-single 4a002840.pinmux: request pin 96 (4a002900) for 4809a000.spi
[    1.782775] pinctrl-single 4a002840.pinmux: request pin 97 (4a002902) for 4809a000.spi
[    1.782775] pinctrl-single 4a002840.pinmux: enabling pinmux_mcspi2_pins function15
[    1.783447] pinctrl core: add 1 pinmux maps
[    1.783447] pinctrl-single 4a002840.pinmux: found group selector 16 for pinmux_mcspi3_pins
[    1.783477] pinctrl-single 4a002840.pinmux: request pin 60 (4a0028b8) for 480b8000.spi
[    1.783477] pinctrl-single 4a002840.pinmux: request pin 61 (4a0028ba) for 480b8000.spi
[    1.783508] pinctrl-single 4a002840.pinmux: request pin 62 (4a0028bc) for 480b8000.spi
[    1.783508] pinctrl-single 4a002840.pinmux: request pin 63 (4a0028be) for 480b8000.spi
[    1.783508] pinctrl-single 4a002840.pinmux: enabling pinmux_mcspi3_pins function16
[    1.783996] pinctrl core: add 1 pinmux maps
[    1.784027] pinctrl-single 4a002840.pinmux: found group selector 17 for pinmux_mcspi4_pins
[    1.784057] pinctrl-single 4a002840.pinmux: request pin 178 (4a0029a4) for 480ba000.spi
[    1.784057] pinctrl-single 4a002840.pinmux: pin 4a0029a4 already requested by 4a002840.pinmux; cannot claim for 480ba000.spi
[    1.795837] pinctrl-single 4a002840.pinmux: pin-178 (480ba000.spi) status -22
[    1.803344] pinctrl-single 4a002840.pinmux: could not request pin 178 on device pinctrl-single
[    1.812377] pinctrl-single 4a002840.pinmux: ignoring disable for pinmux_mcspi4_pins function17
[    1.812408] omap2_mcspi 480ba000.spi: pins are not configured from the driver
[    1.824279] usbcore: registered new interface driver asix
[    1.830169] usbcore: registered new interface driver cdc_ether
[    1.836486] usbcore: registered new interface driver smsc95xx
[    1.842712] usbcore: registered new interface driver net1080
[    1.848846] usbcore: registered new interface driver cdc_subset
[    1.855285] usbcore: registered new interface driver zaurus
[    1.861358] usbcore: registered new interface driver cdc_ncm
[    1.868164] usbcore: registered new interface driver cdc_wdm
[    1.874114] Initializing USB Mass Storage driver...
[    1.879455] usbcore: registered new interface driver usb-storage
[    1.885742] USB Mass Storage support registered.
[    1.890808] usbcore: registered new interface driver usbtest
[    1.897674] mousedev: PS/2 mouse device common for all mice
[    1.910278] palmas-rtc palmas_rtc.30: rtc core: registered palmas_rtc.30 as rtc0
[    1.919860] i2c /dev entries driver
[    1.927276] Driver for 1-wire Dallas network protocol.
[    1.934906] omap_wdt: OMAP Watchdog Timer Rev 0x01: initial timeout 60 sec
[    1.944427] palmas-wdt palmas_wdt.29: Failed to register misc device
[    1.951110] palmas-wdt: probe of palmas_wdt.29 failed with error -16
[    1.958251] hdev edb69000
[    1.959259] HCI device registered (hdev edb69000)
[    1.959503] hci0 edb69000
[    1.961120] of_get_named_gpio_flags: can't parse gpios property
[    1.961151] of_get_named_gpio_flags: can't parse gpios property
[    1.961486] omap-dma-engine 4a056000.dma-controller: allocating channel for 62
[    1.961517] omap-dma-engine 4a056000.dma-controller: allocating channel for 61
[    1.959533] (stc):  chnl_id list empty :4
[    1.979156] (stk) : st_kim_start<4>[    1.983428] omap_hsmmc 4809c000.mmc: pins are not configured from the driver
[    2.033203] of_get_named_gpio_flags: can't parse gpios property
[    2.033203] of_get_named_gpio_flags: can't parse gpios property
[    2.033325] omap-dma-engine 4a056000.dma-controller: allocating channel for 48
[    2.041015] omap-dma-engine 4a056000.dma-controller: allocating channel for 47
[    2.051818] omap_hsmmc 480b4000.mmc: pins are not configured from the driver
[    2.098571] mmc0: host does not support reading read-only switch. assuming write-enable.
[    2.103302] of_get_named_gpio_flags: can't parse gpios property
[    2.103302] of_get_named_gpio_flags: can't parse gpios property
[    2.103424] omap-dma-engine 4a056000.dma-controller: allocating channel for 78
[    2.103424] omap-dma-engine 4a056000.dma-controller: allocating channel for 77
[    2.103607] omap_hsmmc 480ad000.mmc: pins are not configured from the driver
[    2.131622] mmc0: new high speed SDHC card at address 59b4
[    2.138427] mmcblk0: mmc0:59b4 USD   7.51 GiB
[    2.145629]  mmcblk0: p1 p2
[    2.217620] mmc1: BKOPS_EN bit is not set
[    2.221282] leds-gpio leds.20: pins are not configured from the driver
[    2.221313] of_get_named_gpio_flags exited with status 153
[    2.221313] of_get_named_gpio_flags exited with status 153
[    2.222747] ledtrig-cpu: registered to indicate activity on CPUs
[    2.223632] usbcore: registered new interface driver usbhid
[    2.223632] usbhid: USB HID core driver
[    2.224304] platform 4a0021e0.bandgap: Driver ti-soc-thermal requests probe deferral
[    2.253662]  remoteproc0: dsp is available
[    2.254791] mmc1: new high speed MMC card at address 0001
[    2.263641]  remoteproc0: Note: remoteproc is still under development and considered experimental.
[    2.273071]  remoteproc0: THE BINARY FORMAT IS NOT YET FINALIZED, and backward compatibility isn't yet guaranteed.
[    2.273132] mmcblk1: mmc1:0001 SEM04G 3.68 GiB
[    2.273437] mmcblk1boot0: mmc1:0001 SEM04G partition 1 2.00 MiB
[    2.273712] mmcblk1boot1: mmc1:0001 SEM04G partition 2 2.00 MiB
[    2.301788]  mmcblk1: unknown partition table
[    2.302093]  remoteproc1: ipu is available
[    2.302093]  remoteproc1: Note: remoteproc is still under development and considered experimental.
[    2.302093]  remoteproc1: THE BINARY FORMAT IS NOT YET FINALIZED, and backward compatibility isn't yet guaranteed.
[    2.333374]  mmcblk1boot1: unknown partition table
[    2.340362]  mmcblk1boot0: unknown partition table
[    2.353759] omap-hdmi-audio-card sound_hdmi.19:  omap-hdmi-hifi <-> omap-hdmi-audio mapping ok
[    2.367645] oprofile: no performance counters
[    2.373260] oprofile: using timer interrupt.
[    2.378082] TCP: cubic registered
[    2.381530] Initializing XFRM netlink socket
[    2.386108] NET: Registered protocol family 17
[    2.390808] NET: Registered protocol family 15
[    2.395629] Bluetooth: RFCOMM TTY layer initialized
[    2.400787] Bluetooth: RFCOMM socket layer initialized
[    2.406188] Bluetooth: RFCOMM ver 1.11
[    2.410125] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[    2.415710] Bluetooth: BNEP socket layer initialized
[    2.420898] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
[    2.427124] Bluetooth: HIDP socket layer initialized
[    2.432525] Key type dns_resolver registered
[    2.437011] NET: Registered protocol family 40
[    2.087585] (stk) :ldisc_install = 1
[    2.441955] VFP support v0.3: implementor 41 architecture 4 part 30 variant f rev 0
[    2.450256] mux: Failed to setup hwmod io irq -22
[    2.458343] Power Management for TI OMAP4PLUS devices.
[    2.463867] ThumbEE CPU extension supported.
[    2.469879] ldo8: disabling
[    2.473663] ldo3: disabling
[    2.479095] dmm 4e000000.dmm: initialized all PAT entries
[    2.488555] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[    2.495544] [drm] No driver support for vblank timestamp query.
[    2.505767] omapdrm omapdrm.0: No connectors reported connected with modes
[    2.513000] [drm] Cannot find any crtc or sizes - going 1024x768
[    2.524658] [drm] Enabling DMM ywrap scrolling
[    2.534515] Console: switching to colour frame buffer device 128x48
[    2.544464] omapdrm omapdrm.0: fb0: omapdrm frame buffer device
[    2.550659] omapdrm omapdrm.0: registered panic notifier
[    2.556243] [drm] Initialized omapdrm 1.0.0 20110917 on minor 0
[    2.567779] palmas-rtc palmas_rtc.30: setting system clock to 2023-01-05 21:13:31 UTC (1672953211)
[    2.577423] ALSA device list:
[    2.580535]   #0: OMAP5HDMI
[    2.663543] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
[    2.672058] VFS: Mounted root (ext4 filesystem) on device 179:2.
[    2.680511] devtmpfs: mounted
[    2.683807] Freeing init memory: 372K
[    3.087677] (stk) :ldisc installation timeout
[    3.092132] (stk) :ldisc_install = 0udevd[1017]: starting version 182
[    4.018218] aess 401f1000.aess: Failed to load firmware 0
[    4.095397] (stk) : timed out waiting for ldisc to be un-installed
[    4.208801] (stk) :ldisc_install = 1<6>[    4.336761] palmas-usb palmas_usb.36: Initialized Palmas USB module
[    4.583190] ahci ahci.0.auto: can't get clock
[    4.610748] ahci: SSS flag set, parallel bus scan disabled
[    4.693145] ahci ahci.0.auto: AHCI 0001.0300 32 slots 1 ports 3 Gbps 0x1 impl platform mode
[    4.732025]  remoteproc1: failed to load ducati-m3-core0.xem3
[    4.740112] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    4.742401]  remoteproc0: failed to load tesla-dsp.xe64T
[    4.759338] ahci ahci.0.auto: flags: 64bit ncq sntf stag pm led clo only pmp pio slum part ccc apst
[    4.771057] omap-abe-twl6040 sound.18: McASP node is not provided
[    4.784515] aess 401f1000.aess: ABE firmware size 54048 bytes
[    4.790527] aess 401f1000.aess: ABE mem P 8192 C 7852 D 16384 S 21600 bytes
[    4.810699] ehci-omap: OMAP-EHCI Host Controller driver
[    4.853332] scsi0 : ahci_platform
[    4.876464] ata1: SATA max UDMA/133 mmio [mem 0x4a140000-0x4a1401ff] port 0x100 irq 86
[    4.899414] aess 401f1000.aess: ABE Firmware version 9590
[    5.012329] aess 401f1000.aess: ABE Config size 6160 bytes
[    5.018249] ehci-omap 4a064c00.ehci: EHCI Host Controller
[    5.101623] aess 401f1000.aess: ASoC: got 5 new coefficients
[    5.101654] aess 401f1000.aess: ASoC: adding enum kcontrol DL1 Equalizer size 5
[    5.101654] aess 401f1000.aess: ASoC: no handler specified for kcontrol DL1 Equalizer
[    5.101745] aess 401f1000.aess: ASoC: got 5 new coefficients
[    5.101776] aess 401f1000.aess: ASoC: adding enum kcontrol DL2 Left Equalizer size 5
[    5.101776] aess 401f1000.aess: ASoC: no handler specified for kcontrol DL2 Left Equalizer
[    5.101806] aess 401f1000.aess: ASoC: got 5 new coefficients
[    5.101806] aess 401f1000.aess: ASoC: adding enum kcontrol DL2 Right Equalizer size 5
[    5.101806] aess 401f1000.aess: ASoC: no handler specified for kcontrol DL2 Right Equalizer
[    5.101837] aess 401f1000.aess: ASoC: got 4 new coefficients
[    5.101837] aess 401f1000.aess: ASoC: adding enum kcontrol SDT Equalizer size 4
[    5.101837] aess 401f1000.aess: ASoC: no handler specified for kcontrol SDT Equalizer
[    5.101867] aess 401f1000.aess: ASoC: got 3 new coefficients
[    5.101867] aess 401f1000.aess: ASoC: adding enum kcontrol DMic Equalizer size 3
[    5.101867] aess 401f1000.aess: ASoC: no handler specified for kcontrol DMic Equalizer
[    5.101898] aess 401f1000.aess: ASoC: got 3 new coefficients
[    5.101898] aess 401f1000.aess: ASoC: adding enum kcontrol Amic Equalizer size 3
[    5.101898] aess 401f1000.aess: ASoC: no handler specified for kcontrol Amic Equalizer
[    5.101928] aess 401f1000.aess: ASoC: Got 0x92c bytes of type 1 version 0 vendor 0 at pass 1
[    5.101928] aess 401f1000.aess: ASoC: adding 26 kcontrols
[    5.101928] aess 401f1000.aess: ASoC: adding mixer kcontrol DL1 Media Playback Volume with access 0x13
[    5.101959] aess 401f1000.aess: ASoC: no handler specified for kcontrol DL1 Media Playback Volume
[    5.101959] aess 401f1000.aess:  created TLV type 1 size 8 bytes
[    5.101959] aess 401f1000.aess: ASoC: adding mixer kcontrol DL1 Tones Playback Volume with access 0x13
[    5.101989] aess 401f1000.aess: ASoC: no handler specified for kcontrol DL1 Tones Playback Volume
[    5.101989] aess 401f1000.aess:  created TLV type 1 size 8 bytes
[    5.101989] aess 401f1000.aess: ASoC: adding mixer kcontrol DL1 Voice Playback Volume with access 0x13
[    5.101989] aess 401f1000.aess: ASoC: no handler specified for kcontrol DL1 Voice Playback Volume
[    5.102020] aess 401f1000.aess:  created TLV type 1 size 8 bytes
[    5.102020] aess 401f1000.aess: ASoC: adding mixer kcontrol DL1 Capture Playback Volume with access 0x13
[    5.102020] aess 401f1000.aess: ASoC: no handler specified for kcontrol DL1 Capture Playback Volume
[    5.102050] aess 401f1000.aess:  created TLV type 1 size 8 bytes
[    5.102050] aess 401f1000.aess: ASoC: adding mixer kcontrol DL2 Media Playback Volume with access 0x13
[    5.102081] aess 401f1000.aess: ASoC: no handler specified for kcontrol DL2 Media Playback Volume
[    5.102081] aess 401f1000.aess:  created TLV type 1 size 8 bytes
[    5.102081] aess 401f1000.aess: ASoC: adding mixer kcontrol DL2 Tones Playback Volume with access 0x13
[    5.102081] aess 401f1000.aess: ASoC: no handler specified for kcontrol DL2 Tones Playback Volume
[    5.102111] aess 401f1000.aess:  created TLV type 1 size 8 bytes
[    5.102111] aess 401f1000.aess: ASoC: adding mixer kcontrol DL2 Voice Playback Volume with access 0x13
[    5.102111] aess 401f1000.aess: ASoC: no handler specified for kcontrol DL2 Voice Playback Volume
[    5.102142] aess 401f1000.aess:  created TLV type 1 size 8 bytes
[    5.102142] aess 401f1000.aess: ASoC: adding mixer kcontrol DL2 Capture Playback Volume with access 0x13
[    5.102142] aess 401f1000.aess: ASoC: no handler specified for kcontrol DL2 Capture Playback Volume
[    5.102172] aess 401f1000.aess:  created TLV type 1 size 8 bytes
[    5.102172] aess 401f1000.aess: ASoC: adding mixer kcontrol VXREC Media Volume with access 0x13
[    5.102172] aess 401f1000.aess: ASoC: no handler specified for kcontrol VXREC Media Volume
[    5.102203] aess 401f1000.aess:  created TLV type 1 size 8 bytes
[    5.102203] aess 401f1000.aess: ASoC: adding mixer kcontrol VXREC Tones Volume with access 0x13
[    5.102203] aess 401f1000.aess: ASoC: no handler specified for kcontrol VXREC Tones Volume
[    5.102203] aess 401f1000.aess:  created TLV type 1 size 8 bytes
[    5.102233] aess 401f1000.aess: ASoC: adding mixer kcontrol VXREC Voice DL Volume with access 0x13
[    5.102233] aess 401f1000.aess: ASoC: no handler specified for kcontrol VXREC Voice DL Volume
[    5.102233] aess 401f1000.aess:  created TLV type 1 size 8 bytes
[    5.102264] aess 401f1000.aess: ASoC: adding mixer kcontrol VXREC Voice UL Volume with access 0x13
[    5.102264] aess 401f1000.aess: ASoC: no handler specified for kcontrol VXREC Voice UL Volume
[    5.102264] aess 401f1000.aess:  created TLV type 1 size 8 bytes
[    5.102294] aess 401f1000.aess: ASoC: adding mixer kcontrol AUDUL Media Volume with access 0x13
[    5.102294] aess 401f1000.aess: ASoC: no handler specified for kcontrol AUDUL Media Volume
[    5.102294] aess 401f1000.aess:  created TLV type 1 size 8 bytes
[    5.102325] aess 401f1000.aess: ASoC: adding mixer kcontrol AUDUL Tones Volume with access 0x13
[    5.102325] aess 401f1000.aess: ASoC: no handler specified for kcontrol AUDUL Tones Volume
[    5.102325] aess 401f1000.aess:  created TLV type 1 size 8 bytes
[    5.102355] aess 401f1000.aess: ASoC: adding mixer kcontrol AUDUL Voice UL Volume with access 0x13
[    5.102355] aess 401f1000.aess: ASoC: no handler specified for kcontrol AUDUL Voice UL Volume
[    5.102355] aess 401f1000.aess:  created TLV type 1 size 8 bytes
[    5.102355] aess 401f1000.aess: ASoC: adding mixer kcontrol AUDUL Voice DL Volume with access 0x13
[    5.102386] aess 401f1000.aess: ASoC: no handler specified for kcontrol AUDUL Voice DL Volume
[    5.102386] aess 401f1000.aess:  created TLV type 1 size 8 bytes
[    5.102416] aess 401f1000.aess: ASoC: adding mixer kcontrol SDT UL Volume with access 0x13
[    5.102416] aess 401f1000.aess: ASoC: no handler specified for kcontrol SDT UL Volume
[    5.102416] aess 401f1000.aess:  created TLV type 1 size 8 bytes
[    5.102447] aess 401f1000.aess: ASoC: adding mixer kcontrol SDT DL Volume with access 0x13
[    5.102447] aess 401f1000.aess: ASoC: no handler specified for kcontrol SDT DL Volume
[    5.102447] aess 401f1000.aess:  created TLV type 1 size 8 bytes
[    5.102478] aess 401f1000.aess: ASoC: adding mixer kcontrol DMIC1 UL Volume with access 0x13
[    5.102478] aess 401f1000.aess: ASoC: no handler specified for kcontrol DMIC1 UL Volume
[    5.102478] aess 401f1000.aess:  created TLV type 1 size 8 bytes
[    5.102508] aess 401f1000.aess: ASoC: adding mixer kcontrol DMIC2 UL Volume with access 0x13
[    5.102508] aess 401f1000.aess: ASoC: no handler specified for kcontrol DMIC2 UL Volume
[    5.102508] aess 401f1000.aess:  created TLV type 1 size 8 bytes
[    5.102539] aess 401f1000.aess: ASoC: adding mixer kcontrol DMIC3 UL Volume with access 0x13
[    5.102539] aess 401f1000.aess: ASoC: no handler specified for kcontrol DMIC3 UL Volume
[    5.102539] aess 401f1000.aess:  created TLV type 1 size 8 bytes
[    5.102569] aess 401f1000.aess: ASoC: adding mixer kcontrol AMIC UL Volume with access 0x13
[    5.102569] aess 401f1000.aess: ASoC: no handler specified for kcontrol AMIC UL Volume
[    5.102600] aess 401f1000.aess:  created TLV type 1 size 8 bytes
[    5.102600] aess 401f1000.aess: ASoC: adding mixer kcontrol BT UL Volume with access 0x13
[    5.102600] aess 401f1000.aess: ASoC: no handler specified for kcontrol BT UL Volume
[    5.102600] aess 401f1000.aess:  created TLV type 1 size 8 bytes
[    5.102630] aess 401f1000.aess: ASoC: adding mixer kcontrol DL1 Mono Mixer with access 0x0
[    5.102630] aess 401f1000.aess: ASoC: no handler specified for kcontrol DL1 Mono Mixer
[    5.102661] aess 401f1000.aess: ASoC: adding mixer kcontrol DL2 Mono Mixer with access 0x0
[    5.102661] aess 401f1000.aess: ASoC: no handler specified for kcontrol DL2 Mono Mixer
[    5.102661] aess 401f1000.aess: ASoC: adding mixer kcontrol AUDUL Mono Mixer with access 0x0
[    5.102691] aess 401f1000.aess: ASoC: no handler specified for kcontrol AUDUL Mono Mixer
[    5.102691] aess 401f1000.aess: ASoC: adding 46 DAPM widgets
[    5.102691] aess 401f1000.aess: ASoC: creating DAPM widget TONES_DL id 23
[    5.102722] aess 401f1000.aess: ASoC: creating DAPM widget VX_DL id 23
[    5.102722] aess 401f1000.aess: ASoC: creating DAPM widget VX_UL id 24
[    5.102752] aess 401f1000.aess: ASoC: creating DAPM widget MM_UL1 id 24
[    5.102752] aess 401f1000.aess: ASoC: creating DAPM widget MM_UL2 id 24
[    5.102783] aess 401f1000.aess: ASoC: creating DAPM widget MM_DL id 23
[    5.102783] aess 401f1000.aess: ASoC: creating DAPM widget MODEM_DL id 23
[    5.102813] aess 401f1000.aess: ASoC: creating DAPM widget MODEM_UL id 24
[    5.102813] aess 401f1000.aess: ASoC: creating DAPM widget PDM_UL1 id 23
[    5.102844] aess 401f1000.aess: ASoC: creating DAPM widget PDM_DL1 id 24
[    5.102844] aess 401f1000.aess: ASoC: creating DAPM widget PDM_DL2 id 24
[    5.102844] aess 401f1000.aess: ASoC: creating DAPM widget BT_VX_UL id 23
[    5.102874] aess 401f1000.aess: ASoC: creating DAPM widget BT_VX_DL id 24
[    5.102874] aess 401f1000.aess: ASoC: creating DAPM widget MM_EXT_UL id 23
[    5.102905] aess 401f1000.aess: ASoC: creating DAPM widget MM_EXT_DL id 24
[    5.102905] aess 401f1000.aess: ASoC: creating DAPM widget DMIC0 id 23
[    5.102935] aess 401f1000.aess: ASoC: creating DAPM widget DMIC1 id 23
[    5.102935] aess 401f1000.aess: ASoC: creating DAPM widget DMIC2 id 23
[    5.102935] aess 401f1000.aess: ASoC: creating DAPM widget MUX_UL00 id 2
[    5.102966] aess 401f1000.aess: ASoC: widget MUX_UL00 has 1 controls of type 828206
[    5.102966] aess 401f1000.aess:  adding DAPM widget enum control Route
[    5.102966] aess 401f1000.aess: ASoC: no handler specified for kcontrol Route
[    5.102996] aess 401f1000.aess: ASoC: no handler specified for ext widget MUX_UL00
[    5.102996] aess 401f1000.aess: ASoC: creating DAPM widget MUX_UL01 id 2
[    5.102996] aess 401f1000.aess: ASoC: widget MUX_UL01 has 1 controls of type 828206
[    5.103027] aess 401f1000.aess:  adding DAPM widget enum control Route
[    5.103027] aess 401f1000.aess: ASoC: no handler specified for kcontrol Route
[    5.103057] aess 401f1000.aess: ASoC: no handler specified for ext widget MUX_UL01
[    5.103057] aess 401f1000.aess: ASoC: creating DAPM widget MUX_UL02 id 2
[    5.103057] aess 401f1000.aess: ASoC: widget MUX_UL02 has 1 controls of type 828206
[    5.103088] aess 401f1000.aess:  adding DAPM widget enum control Route
[    5.103088] aess 401f1000.aess: ASoC: no handler specified for kcontrol Route
[    5.103088] aess 401f1000.aess: ASoC: no handler specified for ext widget MUX_UL02
[    5.103118] aess 401f1000.aess: ASoC: creating DAPM widget MUX_UL03 id 2
[    5.103118] aess 401f1000.aess: ASoC: widget MUX_UL03 has 1 controls of type 828206
[    5.103118] aess 401f1000.aess:  adding DAPM widget enum control Route
[    5.103149] aess 401f1000.aess: ASoC: no handler specified for kcontrol Route
[    5.119201] ehci-omap 4a064c00.ehci: new USB bus registered, assigned bus number 1
[    5.136535] aess 401f1000.aess: ASoC: no handler specified for ext widget MUX_UL03
[    5.136566] aess 401f1000.aess: ASoC: creating DAPM widget MUX_UL04 id 2
[    5.136596] aess 401f1000.aess: ASoC: widget MUX_UL04 has 1 controls of type 828206
[    5.136596] aess 401f1000.aess:  adding DAPM widget enum control Route
[    5.136627] aess 401f1000.aess: ASoC: no handler specified for kcontrol Route
[    5.136627] aess 401f1000.aess: ASoC: no handler specified for ext widget MUX_UL04
[    5.136627] aess 401f1000.aess: ASoC: creating DAPM widget MUX_UL05 id 2
[    5.136657] aess 401f1000.aess: ASoC: widget MUX_UL05 has 1 controls of type 828206
[    5.136657] aess 401f1000.aess:  adding DAPM widget enum control Route
[    5.136688] aess 401f1000.aess: ASoC: no handler specified for kcontrol Route
[    5.136688] aess 401f1000.aess: ASoC: no handler specified for ext widget MUX_UL05
[    5.136688] aess 401f1000.aess: ASoC: creating DAPM widget MUX_UL10 id 2
[    5.136718] aess 401f1000.aess: ASoC: widget MUX_UL10 has 1 controls of type 828206
[    5.136718] aess 401f1000.aess:  adding DAPM widget enum control Route
[    5.136749] aess 401f1000.aess: ASoC: no handler specified for kcontrol Route
[    5.136749] aess 401f1000.aess: ASoC: no handler specified for ext widget MUX_UL10
[    5.136779] aess 401f1000.aess: ASoC: creating DAPM widget MUX_UL11 id 2
[    5.136779] aess 401f1000.aess: ASoC: widget MUX_UL11 has 1 controls of type 828206
[    5.136810] aess 401f1000.aess:  adding DAPM widget enum control Route
[    5.136810] aess 401f1000.aess: ASoC: no handler specified for kcontrol Route
[    5.136840] aess 401f1000.aess: ASoC: no handler specified for ext widget MUX_UL11
[    5.136840] aess 401f1000.aess: ASoC: creating DAPM widget MUX_VX0 id 2
[    5.136840] aess 401f1000.aess: ASoC: widget MUX_VX0 has 1 controls of type 828206
[    5.136871] aess 401f1000.aess:  adding DAPM widget enum control Route
[    5.136871] aess 401f1000.aess: ASoC: no handler specified for kcontrol Route
[    5.136871] aess 401f1000.aess: ASoC: no handler specified for ext widget MUX_VX0
[    5.136901] aess 401f1000.aess: ASoC: creating DAPM widget MUX_VX1 id 2
[    5.136901] aess 401f1000.aess: ASoC: widget MUX_VX1 has 1 controls of type 828206
[    5.136901] aess 401f1000.aess:  adding DAPM widget enum control Route
[    5.136932] aess 401f1000.aess: ASoC: no handler specified for kcontrol Route
[    5.136932] aess 401f1000.aess: ASoC: no handler specified for ext widget MUX_VX1
[    5.136962] aess 401f1000.aess: ASoC: creating DAPM widget DL1 Mixer id 5
[    5.136962] aess 401f1000.aess: ASoC: widget DL1 Mixer has 4 controls of type 808001
[    5.136962] aess 401f1000.aess:  adding DAPM widget mixer control Tones at 0
[    5.136993] aess 401f1000.aess: ASoC: no handler specified for kcontrol Tones
[    5.136993] aess 401f1000.aess:  adding DAPM widget mixer control Voice at 1
[    5.136993] aess 401f1000.aess: ASoC: no handler specified for kcontrol Voice
[    5.137023] aess 401f1000.aess:  adding DAPM widget mixer control Capture at 2
[    5.137023] aess 401f1000.aess: ASoC: no handler specified for kcontrol Capture
[    5.137023] aess 401f1000.aess:  adding DAPM widget mixer control Multimedia at 3
[    5.137054] aess 401f1000.aess: ASoC: no handler specified for kcontrol Multimedia
[    5.137054] aess 401f1000.aess: ASoC: no handler specified for ext widget DL1 Mixer
[    5.137054] aess 401f1000.aess: ASoC: creating DAPM widget DL2 Mixer id 5
[    5.137084] aess 401f1000.aess: ASoC: widget DL2 Mixer has 4 controls of type 808001
[    5.137084] aess 401f1000.aess:  adding DAPM widget mixer control Tones at 0
[    5.137084] aess 401f1000.aess: ASoC: no handler specified for kcontrol Tones
[    5.137084] aess 401f1000.aess:  adding DAPM widget mixer control Voice at 1
[    5.137115] aess 401f1000.aess: ASoC: no handler specified for kcontrol Voice
[    5.137115] aess 401f1000.aess:  adding DAPM widget mixer control Capture at 2
[    5.137115] aess 401f1000.aess: ASoC: no handler specified for kcontrol Capture
[    5.137115] aess 401f1000.aess:  adding DAPM widget mixer control Multimedia at 3
[    5.137145] aess 401f1000.aess: ASoC: no handler specified for kcontrol Multimedia
[    5.137145] aess 401f1000.aess: ASoC: no handler specified for ext widget DL2 Mixer
[    5.137145] aess 401f1000.aess: ASoC: creating DAPM widget DL1 Media Volume id 7
[    5.137176] aess 401f1000.aess: ASoC: creating DAPM widget Voice Capture Mixer id 5
[    5.137207] aess 401f1000.aess: ASoC: widget Voice Capture Mixer has 3 controls of type 808001
[    5.137207] aess 401f1000.aess:  adding DAPM widget mixer control Tones Playback at 0
[    5.137207] aess 401f1000.aess: ASoC: no handler specified for kcontrol Tones Playback
[    5.137237] aess 401f1000.aess:  adding DAPM widget mixer control Media Playback at 1
[    5.137237] aess 401f1000.aess: ASoC: no handler specified for kcontrol Media Playback
[    5.137237] aess 401f1000.aess:  adding DAPM widget mixer control Capture at 2
[    5.137237] aess 401f1000.aess: ASoC: no handler specified for kcontrol Capture
[    5.137268] aess 401f1000.aess: ASoC: no handler specified for ext widget Voice Capture Mixer
[    5.137268] aess 401f1000.aess: ASoC: creating DAPM widget Capture Mixer id 5
[    5.137298] aess 401f1000.aess: ASoC: widget Capture Mixer has 4 controls of type 808001
[    5.137298] aess 401f1000.aess:  adding DAPM widget mixer control Tones at 0
[    5.137298] aess 401f1000.aess: ASoC: no handler specified for kcontrol Tones
[    5.137298] aess 401f1000.aess:  adding DAPM widget mixer control Voice Playback at 1
[    5.137329] aess 401f1000.aess: ASoC: no handler specified for kcontrol Voice Playback
[    5.137329] aess 401f1000.aess:  adding DAPM widget mixer control Voice Capture at 2
[    5.137329] aess 401f1000.aess: ASoC: no handler specified for kcontrol Voice Capture
[    5.137359] aess 401f1000.aess:  adding DAPM widget mixer control Media Playback at 3
[    5.137359] aess 401f1000.aess: ASoC: no handler specified for kcontrol Media Playback
[    5.137359] aess 401f1000.aess: ASoC: no handler specified for ext widget Capture Mixer
[    5.137390] aess 401f1000.aess: ASoC: creating DAPM widget Sidetone Mixer id 5
[    5.137390] aess 401f1000.aess: ASoC: widget Sidetone Mixer has 2 controls of type 808001
[    5.137390] aess 401f1000.aess:  adding DAPM widget mixer control Capture at 0
[    5.137390] aess 401f1000.aess: ASoC: no handler specified for kcontrol Capture
[    5.137420] aess 401f1000.aess:  adding DAPM widget mixer control Playback at 1
[    5.137420] aess 401f1000.aess: ASoC: no handler specified for kcontrol Playback
[    5.137420] aess 401f1000.aess: ASoC: no handler specified for ext widget Sidetone Mixer
[    5.137451] aess 401f1000.aess: ASoC: creating DAPM widget DL1 PDM id 5
[    5.137451] aess 401f1000.aess: ASoC: widget DL1 PDM has 1 controls of type 848001
[    5.137481] aess 401f1000.aess:  adding DAPM widget mixer control Switch at 0
[    5.137481] aess 401f1000.aess: ASoC: no handler specified for kcontrol Switch
[    5.137481] aess 401f1000.aess: ASoC: no handler specified for ext widget DL1 PDM
[    5.137512] aess 401f1000.aess: ASoC: creating DAPM widget DL1 BT_VX id 5
[    5.137512] aess 401f1000.aess: ASoC: widget DL1 BT_VX has 1 controls of type 848001
[    5.137512] aess 401f1000.aess:  adding DAPM widget mixer control Switch at 0
[    5.137512] aess 401f1000.aess: ASoC: no handler specified for kcontrol Switch
[    5.137542] aess 401f1000.aess: ASoC: no handler specified for ext widget DL1 BT_VX
[    5.137542] aess 401f1000.aess: ASoC: creating DAPM widget DL1 MM_EXT id 5
[    5.137542] aess 401f1000.aess: ASoC: widget DL1 MM_EXT has 1 controls of type 848001
[    5.137573] aess 401f1000.aess:  adding DAPM widget mixer control Switch at 0
[    5.137573] aess 401f1000.aess: ASoC: no handler specified for kcontrol Switch
[    5.137573] aess 401f1000.aess: ASoC: no handler specified for ext widget DL1 MM_EXT
[    5.137603] aess 401f1000.aess: ASoC: creating DAPM widget Sidetone Capture VMixer id 5
[    5.137603] aess 401f1000.aess: ASoC: creating DAPM widget Voice Capture VMixer id 5
[    5.138610] aess 401f1000.aess: ASoC: creating DAPM widget DL1 Capture VMixer id 5
[    5.138641] aess 401f1000.aess: ASoC: creating DAPM widget DL2 Capture VMixer id 5
[    5.138671] aess 401f1000.aess: ASoC: creating DAPM widget VX UL VMixer id 5
[    5.138671] aess 401f1000.aess: ASoC: creating DAPM widget VX DL VMixer id 5
[    5.138702] aess 401f1000.aess: ASoC: creating DAPM widget MM VMixer id 5
[    5.138702] aess 401f1000.aess: ASoC: creating DAPM widget BE_OUT id 1
[    5.138732] aess 401f1000.aess: ASoC: creating DAPM widget BE_IN id 0
[    5.138732] aess 401f1000.aess: ASoC: Got 0x4ce4 bytes of type 2 version 0 vendor 0 at pass 2
[    5.138763] aess 401f1000.aess: ASoC: Got 0x4094 bytes of type 3 version 0 vendor 0 at pass 3
[    5.138763] aess 401f1000.aess: ASoC: adding 205 DAPM routes
[    5.212585] (stk) :ldisc installation timeout
[    5.216949] (stk) :ldisc_install = 0<3>[    5.244445] aess 401f1000.aess: opp_get_opp_count: device OPP not found (-19)
[    5.288269] ehci-omap 4a064c00.ehci: irq 109, io mem 0x4a064c00
[    5.359313] aess 401f1000.aess: opp: no OPP data
[    5.376647] ata1: SATA link down (SStatus 0 SControl 300)
[    5.408782] ehci-omap 4a064c00.ehci: USB 2.0 started, EHCI 1.00
[    5.417266] aess 401f1000.aess: No OPP definition
[    5.422515] aess 401f1000.aess: DMEM bank at 0xf04c0000
[    5.422515] aess 401f1000.aess: CMEM bank at 0xf04a8000
[    5.422515] aess 401f1000.aess: SMEM bank at 0xf04b0000
[    5.422515] aess 401f1000.aess: PMEM bank at 0xf04ac000
[    5.422546] aess 401f1000.aess: AESS bank at 0xf04a6000
[    5.422546] aess 401f1000.aess: Map 79 items of size 0xc at offset 0x0
[    5.422546] aess 401f1000.aess: Labels 18 at offset 0x3b8
[    5.422576] aess 401f1000.aess: Functions 26 at offset 0x404
[    5.422576] aess 401f1000.aess: Tasks 42 of size 0x4 at offset 0x470
[    5.422576] aess 401f1000.aess: Ports 17 of size 0xe4 at offset 0x51c
[    5.422576] aess 401f1000.aess: Ping pong port at offset 0x1444
[    5.422607] aess 401f1000.aess: DL1 mono mixer at offset 0x1528
[    5.422607] aess 401f1000.aess: DL2 mono mixer at offset 0x1530
[    5.422607] aess 401f1000.aess: AUDUL mixer at offset 0x1538
[    5.422607] aess 401f1000.aess: ASRC at offset 0x1540
[    5.431701] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    5.438781] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    5.472290] usb usb1: Product: EHCI Host Controller
[    5.479705] usb usb1: Manufacturer: Linux 3.8.13-gcc16f99 ehci_hcd
[    5.493347] usb usb1: SerialNumber: 4a064c00.ehci
[    5.515411] omap-abe-twl6040 sound.18:  snd-soc-dummy-dai <-> MultiMedia1 mapping ok
[    5.524108] hub 1-0:1.0: USB hub found
[    5.529693] hub 1-0:1.0: 3 ports detected
[    5.537689] omap-abe-twl6040 sound.18:  snd-soc-dummy-dai <-> MultiMedia2 mapping ok
[    5.559204] omap-abe-twl6040 sound.18:  snd-soc-dummy-dai <-> Voice mapping ok
[    5.579406] omap-abe-twl6040 sound.18:  snd-soc-dummy-dai <-> Tones mapping ok
[    5.593841] omap-abe-twl6040 sound.18:  snd-soc-dummy-dai <-> MODEM mapping ok
[    5.611846] omap-abe-twl6040 sound.18:  snd-soc-dummy-dai <-> MultiMedia1 LP mapping ok
[    5.778442] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
[    5.784484] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 2
[    5.793609] xhci-hcd xhci-hcd.1.auto: irq 124, io mem 0x4a030000
[    5.799987] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[    5.807098] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    5.814636] usb usb2: Product: xHCI Host Controller
[    5.819702] usb usb2: Manufacturer: Linux 3.8.13-gcc16f99 xhci-hcd
[    5.826232] usb usb2: SerialNumber: xhci-hcd.1.auto
[    5.831970] xHCI xhci_add_endpoint called for root hub
[    5.831970] xHCI xhci_check_bandwidth called for root hub
[    5.832153] hub 2-0:1.0: USB hub found
[    5.836181] hub 2-0:1.0: 1 port detected
[    5.840606] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
[    5.846557] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 3
[    5.854675] usb usb3: New USB device found, idVendor=1d6b, idProduct=0003
[    5.861755] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    5.869293] usb usb3: Product: xHCI Host Controller
[    5.874389] usb usb3: Manufacturer: Linux 3.8.13-gcc16f99 xhci-hcd
[    5.880859] usb usb3: SerialNumber: xhci-hcd.1.auto
[    5.886352] xHCI xhci_add_endpoint called for root hub
[    5.886352] xHCI xhci_check_bandwidth called for root hub
[    5.886535] hub 3-0:1.0: USB hub found
[    5.890441] hub 3-0:1.0: 1 port detected
[    5.894592] usb 1-2: new high-speed USB device number 2 using ehci-omap
[    6.056671] usb 1-2: New USB device found, idVendor=0424, idProduct=3503
[    6.063659] usb 1-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    6.072052] hub 1-2:1.0: USB hub found
[    6.076049] hub 1-2:1.0: 3 ports detected
[    6.220397] (stk) : timed out waiting for ldisc to be un-installed
[    6.333648] (stk) :ldisc_install = 1<6>[    6.368835] usb 1-3: new high-speed USB device number 3 using ehci-omap
[    6.525726] usb 1-3: New USB device found, idVendor=0424, idProduct=9730
[    6.532775] usb 1-3: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    6.544006] smsc95xx v1.0.4
[    6.629272] smsc95xx 1-3:1.0 eth0: register 'smsc95xx' at usb-4a064c00.ehci-3, smsc95xx USB 2.0 Ethernet, ae:f9:f9:e0:3a:07
[    6.634613] omap_i2c 48072000.i2c: controller timed out
[    6.634704] i2c 1-0033: I2C write to TPS6130x failed
[    7.329864] (stk) :ldisc installation timeout
[    7.334289] (stk) :ldisc_install = 0<3>[    7.634521] omap_i2c 48072000.i2c: controller timed out
[    7.640045] i2c 1-0033: I2C write to TPS6130x failed
[    7.645507] omap-abe-twl6040 sound.18:  twl6040-dl1 <-> mcpdm-abe mapping ok
[    7.654785] omap-abe-twl6040 sound.18:  twl6040-ul <-> mcpdm-abe mapping ok
[    7.663818] omap-abe-twl6040 sound.18:  twl6040-dl2 <-> mcpdm-abe mapping ok
[    7.673004] omap-abe-twl6040 sound.18:  snd-soc-dummy-dai <-> 40122000.mcbsp mapping ok
[    7.683135] omap-abe-twl6040 sound.18:  snd-soc-dummy-dai <-> 40124000.mcbsp mapping ok
[    7.694976] omap-abe-twl6040 sound.18:  twl6040-legacy <-> mcpdm-legacy mapping ok
[    7.706420] omap-abe-twl6040 sound.18:  snd-soc-dummy-dai <-> 40124000.mcbsp mapping ok
[    7.723480] input: PandaBoard5 Headset Jack as /devices/sound.18/sound/card1/input0
[    8.337646] (stk) : timed out waiting for ldisc to be un-installed
[    8.451385] (stk) :ldisc_install = 1(stk) :ldisc installation timeout
[    9.457855] (stk) :ldisc_install = 0(stk) : timed out waiting for ldisc to be un-installed
[   10.566772] (stk) :ldisc_install = 1<6>[   11.540344] EXT4-fs (mmcblk0p2): re-mounted. Opts: data=ordered
[   11.564178] (stk) :ldisc installation timeout
[   11.568572] (stk) :ldisc_install = 0(stk) : timed out waiting for ldisc to be un-installed
[   12.684020] (stk) :ldisc_install = 1(stk) :ldisc installation timeout
[   13.684417] (stk) :ldisc_install = 0<6>[   14.334197] smsc95xx 1-3:1.0 eth0: link up, 100Mbps, full-duplex, lpa 0xD1E1
[   14.681365] (stk) : timed out waiting for ldisc to be un-installed
[   14.689697] Bluetooth: st_register failed -22
[  103.677062] omap-dma-engine 4a056000.dma-controller: allocating channel for 101
[  281.445220] omap-dma-engine 4a056000.dma-controller: freeing channel for 101