Terran
Active Member
- Joined
- Oct 30, 2009
- Messages
- 527
- Age
- 33
EvilDragon [Englischer Beitrag] said:No pretty pictures today, but a lot of results.
Nikolaus has been busy testing all the features the mainboard offers, takes quite some time (seriously).
A quick summary upfront:
The main PCB only had TWO layout mistakes - and that can be manually fixed within a few minutes and fixed in the layout file (for the production version) within 1 - 2 hours.
So yes, the main PCB should be ready for production now - and the display PCB as well.
Only missing thing now is the CPU PCB (which is more than halfway done already).
Here's a nice list of what has been done:
Note: As Nikolaus is currently working on the tests, it could be that some stuff that I put in the untested list has been tested by him already
Not much left to test anyways
Tested and working fine:
- * Display (without using the ssd2858)
* Backlight
* Nub-Buttons
* Keyboard Backlight
* BMP180 (Barometric Sensor)
* Nubs
* FTDI (RS232 over USB)
* Power-LEDs
* LID-Detect
* BMC150 - accelerometer works with hacked bma150 input driver
* Panel-I2C
* TSC2007 + touch screen
* Charging Bypass
* Charger
* Fuel Gauge
* Keyboard
* Logo LEDs
* Shoulder Buttons
* USB-Host Currency Converter
* Cinterion Modem (both phone part and GPS)
* Modem Ignite
Issues found
- * Sometimes, I2C hangs (Reset issue)
Not yet tested
- * CRTOUCH - we don't have a driver yet
* INA231 (Current Shunt and Power Monitor)
* Force-Reset-Logic
* Over-Current-Indicator
* BMG160 (Gyroscope)
* BMC150 (Compass)
* BNO055 (9-Axis Sensor)
* Mic-Detect
* FM
* ssd2858
Stuff we need the finished CPU PCB to test them:
- * DPAD, ABXY
* Microphone
* WLAN
* Bluetooth
* Audio (PCM1773 and TWL6040)
* Headset
* Vibra
* (u)SD-Slots
We're getting there - full speed ahead!
BTW: Beware - I'll start an official keyboard layout thread later tonight... I guess there'll be a hot discussion after that...
Übersetzung said:Keine schönen Bilder heute, dafür mit vielen Ergebnissen.
Nikolaus war damit beschäftigt alle Features des Mainboards zu testen - das braucht Zeit (ernsthaft).
Eine schnelle Zusammenfassung:
Das Main-PCB hat nur ZWEI Layout Fehler - das kann händisch leicht in ein paar Minuten gefixt werden und der Fix im Layout-File (Version für die Produktion) in ein bis zwei Stunden.
Damit sollte das Main-PCB fertig für die Produktion sein - und das Display-PCB ebenfalls.
Es fehlt nur noch das CPU-PCB (welches mehr als zur Hälfte fertig ist).
Hier ist eine Liste, von dem was getestet wurde:
Note: Da Nikolaus momentan am testen ist, kann es sein, dass ich etwas auf "Noch nicht getestet" habe, es aber bereits von ihm getestet wurde.
Nicht mehr viel, was zum testen ist.
Getestet und funktionierend:
- Display (ohne ssd2858)
- Hintergrundbeleuchtung
- Nub-Knöpfe
- Keyboard Beleuchtung
- BMP180 (Barometric Sensor)
- Nubs
- FTDI (RS232 über USB)
- Power-LEDs
- LID-Detect
- BMC150 - Funktioniert mit gehacktem bma150 Input-Treiber
- Panel-I2C
- TSC2007 + Touchscreen
- Laden umgehen
- Laden
- Ladeanzeige
- Keyboard
- Logo LEDs
- Schulterknöpfe
- USB-Host Strom Konverter
- Cinterion Modem (Telefon und GPS)
- Modem Ignite
Fehler:
- Manchmal hängt I2C (Reset Fehler)
Noch nicht getestet:
- CRTOUCH - dafür haben wir noch keinen Treiber
- INA231 (Strom Überwachung)
- Force-Reset-Logic
- Over-Current-Indicator
- BMG160 (Gyroscope)
- BMC150 (Compass)
- BNO055 (9-Axis Sensor)
- Mic-Detect
- FM
- ssd2858
Tests, wofür wir das CPU-PCB benötigen:
- DPAD, ABXY
- Microphone
- WLAN
- Bluetooth
- Audio (PCM1773 und TWL6040)
- Headset
- Vibra
- (u)SD-Slots
Wir kommen bald an - Vollgas voraus!
BTW: Achtung - ich werde einen offiziellen Keyboard-Layout-Thread später machen... Ich denke es wird eine hitzige Diskussion...
Blog
Quelle