Pyra Media Coverage


Thanks for the idea. It's a good start for sending the news to the press!

I don't want to include that into the PressKit, as a PressKit should be neutral in my opinion, but sending out a bit more marketing-texts like this one via mail to newssites, including a link to the PressKit for more informaitons, is a good idea.
It's a bit too much for me, but I will use it as basis to create some similar text.

that's ok, but the background info is not going to be read (if at all) if editors do not think there is an interesting story in it, and that you have to provide yourself!!

In any case, just commenting on the english quick info: it does not anywhere answer the basic question: "What is the Dragonbox Pyra?" The reader may deduce (finally somewhere after the fourth paragraph) that it is some kind of mobile device, apparently perfect for work and play on the go or at home..so a fancy model of electric toothbrush?

Why are all of you in here posting instead of standing on corners telling people to order a Pyra? :p
what makes you think we aren't??:D
 
that's ok, but the background info is not going to be read (if at all) if editors do not think there is an interesting story in it, and that you have to provide yourself!!

In any case, just commenting on the english quick info: it does not anywhere answer the basic question: "What is the Dragonbox Pyra?" The reader may deduce (finally somewhere after the fourth paragraph) that it is some kind of mobile device, apparently perfect for work and play on the go or at home..so a fancy model of electric toothbrush?


what makes you think we aren't??:D
Ah, good point. My reason for not doing both at the same time is simple: I don't have a Pyra yet.
I could try to use a smartphone or laptop, but neither is a very good option. I need something with the size and connectivity of the phone, but with real keyboard, like the laptop. If only I could get something like that faster. I suppose I could try wifi with my Pandora.
We need more Pyra orders!
 
I translated the press release into Finnish.

Joukkorahoitus Dragonbox Pyralle alkoi 1.5.2016 keskiyön aikaan saksassa. Kampanja sai yli 600 ennakkotilausta vain kolmessa päivässä – melkein 75% tarvitusta määrästä tuotannon aloittamiseksi.

Noin kolme vuotta ja 200000 euroa on mennyt laitteen suunnitteluun ja kehitykseen. Toimivaa prototyyppiä on testattu ja paranneltu helmikuun alusta.

Tarkkaa toimituspäivää ei ole vielä päätetty, mutta odotamme lähettävämme ensimmäisen erän Pyra laitteita ennen vuoden loppua.

Dragonbox Pyra on OpenPandoran seuraaja, jossa on lukemattomia parannuksia ja monia ominaisuuksia joita ei löydy yhdistettynä missään mobiili laitteessa:
  • Täysin avoin: avoimen lähdekoodin GNU/Linux käyttöjärjestelmä ja avoin laitteisto – helppo hakkeroida, korjata ja muunnella

  • Täysi hallinta: kosketusnäyttö, takavalaistu näppäimistö, peli ohjaimet, analogi tapit, ja neljä olkanäppäintä

  • Tilaa hengittää: 32 GB koneen omaa eMMC muistia, kaksi täysikokoista SDXC kortti paikkaa, plus sisäinen microSDXC kortti paikka

  • Pelaa hyvin muiden kanssa: kaksi USB 2.0-A isäntä porttia, microUSB-B OTG portti, mikki ja kuuloke audio jakki, ja micro HDMI portti

  • Liitännäisyyttä: Bluetooth 4.1, Wifi abgn (2.4 / 5 Ghz), ja vapaavalintainen LTE/3G/GPRS

  • Ilman ehtoja: ei vaadi rekisteröintiä, kukaan DragonBoxilla ei kirjaa valintojasi tai urki tietojasi

  • Modulaarinen rakenne: tulevaisuuden CPU päivitykset ovat mahdollisia ostamatta kokonaan uutta laitetta – hyvä ympäristölle!

  • Läpinäkyvä kehitys: kaikki valinnat tehty ja keskusteltu DragonBox foorumeilla ja blogissa

  • Yhteisö ja tuki: Pyra tullaan työntämään rajojensa ylitse ystävällisten ja innostuneiden ihmisten kanssa jota tapaat foorumeilla

  • Euroopassa laadulla luotu: sirulla joka on suunniteltu amerikassa, tukevalla kotelolla kreikasta, ja täydellä kokoonpanelulla saksassa

  • Taskuunlaitettava: 5 tuuman 720p (293.72 ppi resoluutio) näytöllä, se pysyy mukana matkoilla
Kaikki nämä ominaisuudet yhdessä tekevät DragonBox Pyrasta täydellisen sekä työhön että viihteeseen, matkalla tai kotona, ilman seinässä kiinnioloa.

Pyran täysi hinta tulee olemaan 500-630 euroa mallista riipuen (ilman toimituskuluja tai veroja, mitkä eivät välttämättä kuulu mukaan riippuen maastasi).

Investointi menee korkealaatuisen laitteen tekoon, jossa on ominaisuuksia mitä ei ole nähty missään muussa laitteessa, valmistus euroopassa ja avoimuus jota ei ole nähty missään muussa mobiili laittessa.

Tue naapurustosi avoimen lähdekoodin laitteistoa ja softan kehittäjiä: osta Pyra!

Tekniset tiedot:

Pyralla on modulaarinen rakenne ja koostuu seuraavista kolmista levyistä:

1. Emolevy

2. Näyttö-levy

3. CPU-levy

Käyttäjä voi vaihtaa nämä levyt keskenään, esimerkiksi kuin uusi malli (kuten uudempi CPU-levy) tulee saataville, järjestelmä voidaan päivittää helposti.

Perus järjestelmä mukaanlukien emolevy:

  • Koko: noin 139 x 84 x 29 mm
  • Korkea laatuiset kaiuttimet, analooginen äänenvoimakkuus pyörä
  • Kuuloke portti, sisäänrakennettu mikki, HDMI video uloslähtö, tärinämoottori
  • Ultra-kannettava: noin. 139 x 87 x 32 mm*
  • Jättikokoinen akku pitkäkestoiselle akun kestolle (6000mAH)
  • Peli ohjaimet (Dpadi, 4 olkanäppäintä, 6 etu näppäintä)
  • Kaksi tarkkaa analogi ohjainta painettavalla napilla
  • QWERTY näppäimistö taustavalolla
  • Sisäänrakennettu Wi-Fi 802.11a/b/g/n ja Bluetooth 4.1
  • Kaksois SDXC kortti paikat
  • 2x täysikokoista USB isäntää (yhtä voidaan käyttää eSata porttina pienellä adapterilla), 1x Micro USB, 1x Micro USB (debug ja virran lataaminen)
  • Täysin konfiguroitavat RBG-LEDit ilmoituksille
  • Vapaehtoinen: 3G/4G ja GPS moduuli, eri sensoreita
Tämänhetkinen CPU-levy:

  • Texas Instruments OMAP 5 SoC
2x ARM Cortex-A15 @ 1.5Ghz jossa on NEON SIMD
2x ARM Cortex-M4
PowerVR™ SGX544-MP2
Vivante GC320 2D kiihdytin
  • 4GB RAM, 32GB sisäistä varastotilaa

Tämänhetkinen näyttö-levy:

  • 720p 5" LCD
  • Resistiivinen kosketusnäyttö
 

Attachments

  • Documents in ODT.zip
    113 KB · Views: 280
@Reath: If I may offer a couple of suggestions, mostly grammar fixes and phrasing:

"Laitteen suunnitteluun ja kehitykseen on kulunut noin kolme vuotta ja 200000 euroa. Toimivaa prototyyppiä on testattu ja paranneltu helmikuun alusta lähtien."

"Tarkkaa toimituspäivää ei ole vielä päätetty, mutta odotamme lähettävämme ensimmäisen erän Pyra-laitteita ennen vuoden loppua."

"Dragonbox Pyra on OpenPandoran seuraaja, jossa on lukemattomia parannuksia ja monia ominaisuuksia joita ei löydy yhdistettynä yhdessäkään toisessa mobiililaitteessa"

"Täysi hallinta
: kosketusnäyttö, taustavalaistu näppäimistö, peliohjaimet, analogitapit, ja neljä olkanäppäintä"

"Tilaa hengittää: 32 GB koneen omaa eMMC-muistia, kaksi täysikokoista SDXC-korttipaikkaa, sekä sisäinen microSDXC korttipaikka"

"Pelaa hyvin muiden kanssa: kaksi USB 2.0-A isäntäporttia, microUSB-B OTG portti, mikrofoni- ja kuulokeliitäntä, sekä micro HDMI -portti"

"Liitännäisyyttä: Bluetooth 4.1, Wifi abgn (2.4 / 5 Ghz), ja valinnainen LTE/3G/GPRS"

"Modulaarinen rakenne: tulevaisuuden CPU-päivitykset ovat mahdollisia ostamatta kokonaan uutta laitetta – ympäristöystävällinen!

"Läpinäkyvä kehitys: kaikki valinnat tehty ja keskusteltu DragonBox-foorumeilla ja blogissa"

"Eurooppalaisella laadulla luotu: tukevalla kotelolla kreikasta ja koottuna saksassa, amerikassa suunnitellulla sirulla,"

"Taskukokoinen: 5 tuuman 720p (293.72 ppi resoluutio) näytöllä, soveltuu hyvin mukaanotettavaksi

"Pyran täysi hinta tulee olemaan 500-630 euroa mallista riippuen (ilman toimituskuluja tai veroja, mitkä eivät välttämättä kuulu mukaan riippuen maastasi)."

"Tällä saat korkealaatuisen laitteen ominaisuuksilla, joita ei ole nähty missään muussa laitteessa. Pyra on valmistettu euroopassa avoimuudella, jollaista ei ole nähty missään muussa mobiililaittessa."

"Tue naapurustosi avointen laitteistojen ja ohjelmistojen kehittäjiä: osta Pyra!"

"Pyralla on modulaarinen rakenne ja koostuu kolmesta piirilevystä:"

"2. Näyttöpiirilevy"

"3. Prosessoripiirilevy"

"Piirilevyt on suunniteltu käyttäjän vaihdettaviksi, esimerkiksi kuin uusi malli (kuten uudempi prosessoripiirilevy) tulee saataville, järjestelmä voidaan päivittää helposti.

"Perusjärjestelmä mukaanlukien emolevy:"

"Korkealaatuiset kaiuttimet, analoginen äänenvoimakkuuspyörä"

"Kuulokeportti, sisäänrakennettu mikrofoni, HDMI video -lähtö sekä tärinämoottori"

"Ultrakannettava: noin. 139 x 87 x 32 mm*"

"Jättikokoinen akku pitkällä käyttöajalla (6000mAh)"

"Peliohjaimet (ristiohjain, 4 olkanäppäintä, 6 toimintonäppäintä)"

"Kaksi tarkkaa analogiohjainta näppäintoiminnolla"

"QWERTY-näppäimistö taustavalolla"

"Kaksi SDXC-korttipaikkaa"

"2x täysikokoista USB-liitäntää (yhtä voidaan käyttää eSATA-porttina pienellä adapterilla), 1x Micro USB3 OTG, 1x Micro USB (debug ja virran lataaminen)"

"Valinnainen 3G/4G ja GPS moduuli useilla sensoreita"
 
The Pyra's schematics will be released to the public in their entirety.

This allows everybody to design and create new CPU-boards.
[...]
Fairness:

No animals were harmed during the writing of this document.
Neither do we want to torture human beings in relation to the Pyra's production.

This is why we deliberately decided to produce the device in Europe:
Case tweaking and production takes place in Greece, while board-design, population and final assembly are handled in Germany.

While production in China would be considerably cheaper, we chose to not ignore the, usually abysmal, local working conditions. Monitoring those as well as the quality would only be possible on site and in person.

You cannot ignore China completely, as LCDs are hard to come by elsewhere, but we're doing our best to be as fair as possible.

Hmm, I have several questions here:

what means " schematics will be released to the public in their entirety." exactly ? Will be hobbyist allowed to create non-commercial replacement parts or is this an "full open architecture approach", also commercial competitors will be allowed to create "clones" ? The best answer would be by a license here: for instance either an CC license (CC-SA-BY 4.0, CC-NC-ND etc etc) or public domain (CC0) or an open source hardware license (https://en.wikipedia.org/wiki/Open-source_hardware#Licenses ) ? (personally I would like to see some share alike license or public domain, NC clauses would be harmful)


The "fairness" points sounds good, will be at some point a verifiable report or even a ceritificate by some organization available/provided? Alternativly, the pyra project could give himself something like the Debian's "social contract" https://www.debian.org/social_contract


As last comment: in the "openness" section maybe transparency in the development process and the deep user community involvement/integration in all steps from vision, design, software prodcution, marketing, etc etc should be presented as feature (grass root / open source community approach).
 
Last edited:
@Reath: If I may offer a couple of suggestions, mostly grammar fixes and phrasing:

Thank you. All of your suggestions sound like improvements, so I've added them in the document. Updated versions below.

Joukkorahoitus Dragonbox Pyralle alkoi 1.5.2016 keskiyön aikaan saksassa. Kampanja sai yli 600 ennakkotilausta vain kolmessa päivässä – melkein 75% tarvitusta määrästä tuotannon aloittamiseksi.

Laitteen suunnitteluun ja kehitykseen on kulunut noin kolme vuotta ja 200000 euroa. Toimivaa prototyyppiä on testattu ja paranneltu helmikuun alusta lähtien.

Tarkkaa toimituspäivää ei ole vielä päätetty, mutta odotamme lähettävämme ensimmäisen erän Pyra-laitteita ennen vuoden loppua.

Dragonbox Pyra on OpenPandoran seuraaja, jossa on lukemattomia parannuksia ja monia ominaisuuksia joita ei löydy yhdistettynä yhdessäkään toisessa mobiililaitteessa:

  • Täysin avoin: avoimen lähdekoodin GNU/Linux käyttöjärjestelmä ja avoin laitteisto – helppo hakkeroida, korjata ja muunnella

  • Täysi hallinta: kosketusnäyttö, taustavalaistu näppäimistö, peliohjaimet, analogitapit, ja neljä olkanäppäintä

  • Tilaa hengittää: 32 GB koneen omaa eMMC-muistia, kaksi täysikokoista SDXC-korttipaikkaa, sekä sisäinen microSDXC korttipaikka

  • Pelaa hyvin muiden kanssa: kaksi USB 2.0-A isäntäporttia, microUSB-B OTG portti, mikrofoni- ja kuulokeliitäntä, sekä micro HDMI -portti

  • Liitännäisyyttä: Bluetooth 4.1, Wifi abgn (2.4 / 5 Ghz), ja valinnainen LTE/3G/GPRS

  • Ilman ehtoja: ei vaadi rekisteröintiä, kukaan DragonBoxilla ei kirjaa valintojasi tai urki tietojasi

  • Modulaarinen rakenne: tulevaisuuden CPU-päivitykset ovat mahdollisia ostamatta kokonaan uutta laitetta – ympäristöystävällinen!

  • Läpinäkyvä kehitys: kaikki valinnat tehty ja keskusteltu DragonBox-foorumeilla ja blogissa

  • Yhteisö ja tuki: Pyra tullaan työntämään rajojensa ylitse ystävällisten ja innostuneiden ihmisten kanssa jota tapaat foorumeilla

  • Eurooppalaisella laadulla luotu: tukevalla kotelolla kreikasta ja koottuna saksassa, amerikassa suunnitellulla sirulla

  • Taskukokoinen: 5 tuuman 720p (293.72 ppi resoluutio) näytöllä, soveltuu hyvin mukaanotettavaksi

Kaikki nämä ominaisuudet yhdessä tekevät DragonBox Pyrasta täydellisen sekä työhön että viihteeseen, matkalla tai kotona, ilman seinässä kiinnioloa.

Pyran täysi hinta tulee olemaan 500-630 euroa mallista riippuen (ilman toimituskuluja tai veroja, mitkä eivät välttämättä kuulu mukaan riippuen maastasi).

Tällä saat korkealaatuisen laitteen ominaisuuksilla, joita ei ole nähty missään muussa laitteessa. Pyra on valmistettu euroopassa avoimuudella, jollaista ei ole nähty missään muussa mobiililaittessa.

Tue naapurustosi avointen laitteistojen ja ohjelmistojen kehittäjiä: osta Pyra!

Tekniset tiedot:


Pyralla on modulaarinen rakenne ja koostuu kolmesta piirilevystä:


1. Emolevy

2. Näyttöpiirilevy

3. Prosessoripiirilevy


Piirilevyt on suunniteltu käyttäjän vaihdettaviksi, esimerkiksi kuin uusi malli (kuten uudempi prosessoripiirilevy) tulee saataville, järjestelmä voidaan päivittää helposti.

Perusjärjestelmä mukaanlukien emolevy:

  • Koko: noin 139 x 84 x 29 mm

  • Korkealaatuiset kaiuttimet, analoginen äänenvoimakkuuspyörä

  • Kuulokeportti, sisäänrakennettu mikrofoni, HDMI video -lähtö sekä tärinämoottori

  • Ultrakannettava: noin. 139 x 87 x 32 mm*

  • Jättikokoinen akku pitkällä käyttöajalla (6000mAh)

  • Peliohjaimet (ristiohjain, 4 olkanäppäintä, 6 toimintonäppäintä)

  • Kaksi tarkkaa analogiohjainta näppäintoiminnolla

  • QWERTY-näppäimistö taustavalolla

  • Sisäänrakennettu Wi-Fi 802.11a/b/g/n ja Bluetooth 4.1

  • Kaksi SDXC korttipaikkaa

  • 2x täysikokoista USB-liitäntää (yhtä voidaan käyttää eSata-porttina pienellä adapterilla), 1x Micro USB3 OTG, 1x Micro USB (debug ja virran lataaminen)

  • Täysin konfiguroitavat RBG-LEDit ilmoituksille

  • Valinnainen: 3G/4G ja GPS moduuli useilla sensoreilla
Tämänhetkinen CPU-levy:

  • Texas Instruments OMAP 5 SoC
2x ARM Cortex-A15 @ 1.5Ghz jossa on NEON SIMD

2x ARM Cortex-M4

PowerVR™ SGX544-MP2

Vivante GC320 2D kiihdytin

  • 4GB RAM, 32GB sisäistä varastotilaa
Tämänhetkinen näyttö-levy:
  • 720p 5" LCD

  • Resistiivinen kosketusnäyttö
 

Attachments

  • Documents in ODT 2.zip
    114.7 KB · Views: 255
I think these are good points to bring up
  • Not a dime paid to kickstarter/indiegogo or similar
  • Select payment of choice instead of just one thing
  • Everyone pays the same price, no disadvantage at joining after anyone else
 
Just a bit of an update...the current 3d model is pretty good already!
The only object that needed some sort of reduction is the new keymat, everything else is fine.
I did reduce a few bits but the final size at half a million polygons is quite manageable.

edit: added sd cards and modeled the ports.
 
  • Like
Reactions: rSl
Just a bit of an update...the current 3d model is pretty good already!
The only object that needed some sort of reduction is the new keymat, everything else is fine.
I did reduce a few bits but the final size at half a million polygons is quite manageable.

edit: added sd cards and modeled the ports.

From your models, would you be able to tell:
How long is the stylus?
How long is the tube/space that the stylus slides into?

I've fiddled around before with creating a longer aluminum stylus for the Pandora - which worked pretty well. I was considering doing so for the Pyra too. Of course I can just wait until I get the unit in-hand then figure it out myself.
[doublepost=1462483285,1462483179][/doublepost]
Maybe people actually want pre-order exclusives...

Those would be long gone by now. My point is any taker is now on equal footing with the first to join.

The costs associated with "pre-order exclusives" was, clearly, unnecessary. The bonus to pre-ordering is that you get to have one earlier than people who order later. For many of us THAT is a pretty cool exclusive bonus.
 
Just a bit of an update...the current 3d model is pretty good already!
The only object that needed some sort of reduction is the new keymat, everything else is fine.
I did reduce a few bits but the final size at half a million polygons is quite manageable.

edit: added sd cards and modeled the ports.

Great, thanks!

What I'm not that content with is the material for the backplate (or the lighting...?)
It doesn't look very realistic.

Let me know when you uploaded the Blender file, or post any renders you make that we can include into the PressKit.
Of course, colors aren't fixed yet, so you can also do different colors.
[doublepost=1462484057,1462484024][/doublepost]
From your models, would you be able to tell:
How long is the stylus?
How long is the tube/space that the stylus slides into?

I've fiddled around before with creating a longer aluminum stylus for the Pandora - which worked pretty well. I was considering doing so for the Pyra too. Of course I can just wait until I get the unit in-hand then figure it out myself.

The stylus has the exact same size as on the Pandora :)
 
When english text are finalized i could translate into Italian if nobody do it before.
 
The stylus has the exact same size as on the Pandora :)

Is the slot-depth the same as well?

I was able to make an aluminum stylus mock ups about 15mm longer than the Pandora one that fit in the Pandora well. I sent you two of them (red aluminum sticks with yellow dart tips on one end and a 6mm screw head in the other) but never heard back if you tried them. I sent three to others on the boards here as well and they seemed to like them. They nicknamed them the RHS (Red Hot Stylus). Red just happened to be the color of the long 5mm OD aluminum standoffs I was able to source.

Edit: Found a link to Shenmue's pictures of the RHS (his pictures were better than I posted).
They're in the spoiler on this post:
https://pyra-handheld.com/boards/threads/stylus-ideas.75005/page-5#post-1321372

Again - not a big deal and I'll find out if it will work when I get my Pyra.
 
Last edited:
Holy shit, have I just been quoted in the official press-kit?


If you put a screwdriver anywhere near a branded device, that brand will
practically disown you. With a device like the Pyra, the moment you grab a
screwdriver, a whole community will peek over your shoulder with curiosity and
advice.“
 
Holy shit, have I just been quoted in the official press-kit?


If you put a screwdriver anywhere near a branded device, that brand will
practically disown you. With a device like the Pyra, the moment you grab a
screwdriver, a whole community will peek over your shoulder with curiosity and
advice.“
It's a very nice quote and quite true.
 
Back
Top