[solved] bluetooth tethering?


I want to thether my phone (nokia c-5)


I don't get it. I do get hciconfig -a networking but I don't get the option access internet through phone in the bluetooth manager.


also my disconnect button is greyed out.


But I didnt get how you solved it


Is it known why the option doesn't show up in some phones?
 
Last edited by a moderator:
when I try the alerino tutorial I get:


bosbeetle-openpandora:~/Desktop$ sudo pppd call 3Gpppd: This system lacks kernel support for PPP. This could be because


the PPP kernel module could not be loaded, or because PPP was not


included in the kernel configuration. If PPP was included as a


module, try `/sbin/modprobe -v ppp'. If that fails, check that


ppp.o exists in /lib/modules/`uname -r`/net.


See README.linux file in the ppp distribution for more details.


bosbeetle-openpandora:~/Desktop$ /sbin/modprobe -v ppp


FATAL: Module ppp not found.


I am running hf4 shouldnt ppp be in there?


opkg says it is


Package ppp (2.4.3-r9.5) installed in root is up to date.
 
Last edited by a moderator:
getting closer I had the wrong channel


bosbeetle-openpandora:~/Desktop$ sudo pppd call 3G


ATE


Connect script failed


So I guess Im stuck, I hoped I could connect my phone, I have no clue how to proceed
 
Last edited by a moderator:
Another thing I noticed if I connect from pandora to my phone it shows a little key


If I do it the other way around it shows a computer (and disconnect is not grey anymore)
 
Alerino said:
could you output the files you edited?
Click to expand...

I've tried a whole bunch mostly I used directly the ones in this thread. (and some I found on a dutch forum) It goes through until the line with the IP adres and then it gives error connection script failed


However completly oftopic: alternatively I like to try it via the usb, I attach my phone in either 'pc suite' or 'connect pc to internet' mode, in several ubuntu forums it says it should show up in network manager but it doesnt in angstrom on the pandora any idea what I could do there. (desperatly learning some linux here :D )
 
Last edited by a moderator:
however I already fail in the first part my phone doesnt show an option for sharing internet via bluetooth


what outputs do you need?


(I do notice different behaviour when I reboot with bluetooth on ?)

bosbeetle-openpandora:~/Desktop$ sudo pppd call 3G
ATE


Connect script failed
Click to expand...

And that takes quite a while, when I do it again it give the same without ATE but quick
 
Last edited by a moderator:
Alerino said:
bosbeetle said:
however I already fail in the first part my phone doesnt show an option for sharing internet via bluetooth


what outputs do you need?


(I do notice different behaviour when I reboot with bluetooth on ?)
Click to expand...

it won't show in the menu, all nokias use DUN


output all commands you're trying, let's try to find what's wrong


did you set your phone to automatically accept connections from pandora?
Click to expand...

no I didnt do the automatic accept, its an option I only get if i bind from my phone to the pandora, I did it now, still nothing


outputs everything as in your tutorial except



Code: 
'' ATZ

SAY "ATE\n"

OK 'AT+CGDCONT=1,"192.168.1.1","wap.telfort.nl"' 

OK 'AT'

OK 'ATDT*99#'

SAY "Dialing\n"



I've also tried





Code: 
TIMEOUT 5

ECHO    ON

ABORT   '\nBUSY\r'

ABORT   '\nERROR\r'

ABORT   '\nNO ANSWER\r'

ABORT   '\nNO CARRIER\r'

ABORT   '\nNO DIALTONE\r'

ABORT   '\nRINGING\r\n\r\nRINGING\r'

""      \rAT

TIMEOUT 12

OK      ATZ

OK      'AT+CGDCONT=1,"192.168.1.1","wap.tefort.nl",,0,0'

OK      ATD*99***1#


And I removed the two lines in the rfcomm.conf


The IP adres I put in manually in my phone ( it was on automatic)
 
Last edited by a moderator:
Alerino said:
network is fine


OK 'AT+CGDCONT=1,"IP","wap.telfort.nl"'
Click to expand...

no succes


I do the rfcomm bind 0 macadres 5


rfcomm outputs channel 5 clean


then the mknod /dev/ppp c 216 0


and the call pppd call 3G


now I get serial line looped back



Code: 
osbeetle-openpandora:~/Desktop$ sudo pppd call 3G

ATE

Dialing

Serial connection established.

using channel 1

Using interface ppp0

Connect: ppp0 <--> /dev/rfcomm0

sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0x1c24edc6> <pcomp> <accomp>]

rcvd [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0x1c24edc6> <pcomp> <accomp>]

sent [LCP ConfNak id=0x1 <magic 0x57d73d76>]

rcvd [LCP ConfNak id=0x1 <magic 0x57d73d76>]

sent [LCP ConfReq id=0x2 <asyncmap 0x0> <magic 0xbc05876f> <pcomp> <accomp>]

rcvd [LCP ConfReq id=0x2 <asyncmap 0x0> <magic 0xbc05876f> <pcomp> <accomp>]

sent [LCP ConfNak id=0x2 <magic 0x673fd06a>]

rcvd [LCP ConfNak id=0x2 <magic 0x673fd06a>]

sent [LCP ConfReq id=0x3 <asyncmap 0x0> <magic 0x9566bd7a> <pcomp> <accomp>]

rcvd [LCP ConfReq id=0x3 <asyncmap 0x0> <magic 0x9566bd7a> <pcomp> <accomp>]

sent [LCP ConfNak id=0x3 <magic 0xe458e544>]

rcvd [LCP ConfNak id=0x3 <magic 0xe458e544>]

sent [LCP ConfReq id=0x4 <asyncmap 0x0> <magic 0xdd22477a> <pcomp> <accomp>]

rcvd [LCP ConfReq id=0x4 <asyncmap 0x0> <magic 0xdd22477a> <pcomp> <accomp>]

sent [LCP ConfNak id=0x4 <magic 0xacf8d7ce>]

rcvd [LCP ConfNak id=0x4 <magic 0xacf8d7ce>]

sent [LCP ConfReq id=0x5 <asyncmap 0x0> <magic 0x745f0b4d> <pcomp> <accomp>]

rcvd [LCP ConfReq id=0x5 <asyncmap 0x0> <magic 0x745f0b4d> <pcomp> <accomp>]

sent [LCP ConfNak id=0x5 <magic 0x9dbd6911>]

rcvd [LCP ConfNak id=0x5 <magic 0x9dbd6911>]

sent [LCP ConfReq id=0x6 <asyncmap 0x0> <magic 0x582c8364> <pcomp> <accomp>]

rcvd [LCP ConfReq id=0x6 <asyncmap 0x0> <magic 0x582c8364> <pcomp> <accomp>]

sent [LCP ConfNak id=0x6 <magic 0x254bf00>]

rcvd [LCP ConfNak id=0x6 <magic 0x254bf00>]

sent [LCP ConfReq id=0x7 <asyncmap 0x0> <magic 0xf75a3fed> <pcomp> <accomp>]

rcvd [LCP ConfReq id=0x7 <asyncmap 0x0> <magic 0xf75a3fed> <pcomp> <accomp>]

sent [LCP ConfNak id=0x7 <magic 0xea572f65>]

rcvd [LCP ConfNak id=0x7 <magic 0xea572f65>]

sent [LCP ConfReq id=0x8 <asyncmap 0x0> <magic 0x3b638b89> <pcomp> <accomp>]

rcvd [LCP ConfReq id=0x8 <asyncmap 0x0> <magic 0x3b638b89> <pcomp> <accomp>]

sent [LCP ConfNak id=0x8 <magic 0x5d547580>]

rcvd [LCP ConfNak id=0x8 <magic 0x5d547580>]

sent [LCP ConfReq id=0x9 <asyncmap 0x0> <magic 0x18615087> <pcomp> <accomp>]

rcvd [LCP ConfReq id=0x9 <asyncmap 0x0> <magic 0x18615087> <pcomp> <accomp>]

sent [LCP ConfNak id=0x9 <magic 0x8031132>]

rcvd [LCP ConfNak id=0x9 <magic 0x8031132>]

sent [LCP ConfReq id=0xa <asyncmap 0x0> <magic 0xfe7129b7> <pcomp> <accomp>]

rcvd [LCP ConfReq id=0xa <asyncmap 0x0> <magic 0xfe7129b7> <pcomp> <accomp>]

sent [LCP ConfNak id=0xa <magic 0x3f1dfad>]

rcvd [LCP ConfNak id=0xa <magic 0x3f1dfad>]

Serial line is looped back.

sent [LCP TermReq id=0xb "Loopback detected"]

rcvd [LCP TermReq id=0xb "Loopback detected"]

sent [LCP TermAck id=0xb]

rcvd [LCP TermAck id=0xb]

Connection terminated.

bosbeetle-openpandora:~/Desktop$ sudo pppd call 3G

ATE

Dialing

Serial connection established.

using channel 2

Using interface ppp0

Connect: ppp0 <--> /dev/rfcomm0

sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0xfa3ad791> <pcomp> <accomp>]

rcvd [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0xfa3ad791> <pcomp> <accomp>]

sent [LCP ConfNak id=0x1 <magic 0x285c2ae5>]

rcvd [LCP ConfNak id=0x1 <magic 0x285c2ae5>]

sent [LCP ConfReq id=0x2 <asyncmap 0x0> <magic 0x164459b2> <pcomp> <accomp>]

rcvd [LCP ConfReq id=0x2 <asyncmap 0x0> <magic 0x164459b2> <pcomp> <accomp>]

sent [LCP ConfNak id=0x2 <magic 0x34ab88f1>]

rcvd [LCP ConfNak id=0x2 <magic 0x34ab88f1>]

sent [LCP ConfReq id=0x3 <asyncmap 0x0> <magic 0x28198f5> <pcomp> <accomp>]

rcvd [LCP ConfReq id=0x3 <asyncmap 0x0> <magic 0x28198f5> <pcomp> <accomp>]

sent [LCP ConfNak id=0x3 <magic 0x795cdaa3>]

rcvd [LCP ConfNak id=0x3 <magic 0x795cdaa3>]

sent [LCP ConfReq id=0x4 <asyncmap 0x0> <magic 0x73d91aed> <pcomp> <accomp>]

rcvd [LCP ConfReq id=0x4 <asyncmap 0x0> <magic 0x73d91aed> <pcomp> <accomp>]

sent [LCP ConfNak id=0x4 <magic 0xc2ce31c5>]

rcvd [LCP ConfNak id=0x4 <magic 0xc2ce31c5>]

sent [LCP ConfReq id=0x5 <asyncmap 0x0> <magic 0x90be4378> <pcomp> <accomp>]

rcvd [LCP ConfReq id=0x5 <asyncmap 0x0> <magic 0x90be4378> <pcomp> <accomp>]

sent [LCP ConfNak id=0x5 <magic 0x5062f560>]

rcvd [LCP ConfNak id=0x5 <magic 0x5062f560>]

sent [LCP ConfReq id=0x6 <asyncmap 0x0> <magic 0xff8c3b07> <pcomp> <accomp>]

rcvd [LCP ConfReq id=0x6 <asyncmap 0x0> <magic 0xff8c3b07> <pcomp> <accomp>]

sent [LCP ConfNak id=0x6 <magic 0xe9566167>]

rcvd [LCP ConfNak id=0x6 <magic 0xe9566167>]

sent [LCP ConfReq id=0x7 <asyncmap 0x0> <magic 0xd3e8efc8> <pcomp> <accomp>]

rcvd [LCP ConfReq id=0x7 <asyncmap 0x0> <magic 0xd3e8efc8> <pcomp> <accomp>]

sent [LCP ConfNak id=0x7 <magic 0xcfad1a4>]

rcvd [LCP ConfNak id=0x7 <magic 0xcfad1a4>]

sent [LCP ConfReq id=0x8 <asyncmap 0x0> <magic 0x32e83a5c> <pcomp> <accomp>]

rcvd [LCP ConfReq id=0x8 <asyncmap 0x0> <magic 0x32e83a5c> <pcomp> <accomp>]

sent [LCP ConfNak id=0x8 <magic 0x1a687757>]

rcvd [LCP ConfNak id=0x8 <magic 0x1a687757>]

sent [LCP ConfReq id=0x9 <asyncmap 0x0> <magic 0xb7c14312> <pcomp> <accomp>]

rcvd [LCP ConfReq id=0x9 <asyncmap 0x0> <magic 0xb7c14312> <pcomp> <accomp>]

sent [LCP ConfNak id=0x9 <magic 0x39ea3861>]

rcvd [LCP ConfNak id=0x9 <magic 0x39ea3861>]

sent [LCP ConfReq id=0xa <asyncmap 0x0> <magic 0xcc6512ba> <pcomp> <accomp>]

rcvd [LCP ConfReq id=0xa <asyncmap 0x0> <magic 0xcc6512ba> <pcomp> <accomp>]

sent [LCP ConfNak id=0xa <magic 0x40e8c7f4>]

rcvd [LCP ConfNak id=0xa <magic 0x40e8c7f4>]

Serial line is looped back.

sent [LCP TermReq id=0xb "Loopback detected"]

rcvd [LCP TermReq id=0xb "Loopback detected"]

sent [LCP TermAck id=0xb]

rcvd [LCP TermAck id=0xb]
 
Last edited by a moderator:
got I five times in a row, I will restart and try again, were getting somewhere I think :D


always loopback detectend and than connection terminated


(strange thing I noticed is the channel being +1 every time, (serial connection using channel 1)


I get the loopback using



Code: 
OK      ATD*99***1#



instead of





Code: 
OK      ATDT*99#


actually I get it with both
 
Last edited by a moderator:
I also tried the other dailer but that does the same


i found this

Q: When I try to establish a connection, I get an error message saying "Serial line is looped back". Why?
A: Probably your connection script hasn't successfully dialled out to the remote system and invoked ppp service there. Instead, pppd is talking to something which is just echoing back the characters it receives. The -v option to chat can help you find out what's going on. It can be useful to include "~" as the last expect string to chat, so chat won't return until it's seen the start of the first PPP frame from the remote system.
Click to expand...

I think the dailer isnt correct, At least Im talking to my phone now.
 
Last edited by a moderator:
found this for my provider, will try it


"" ATZW2


OK AT&F


OK 'AT+CGDCONT=1,"IP","Internet"'


OK ATD*99#


and still looped back
 
Last edited by a moderator:
Well I guess I have to give it up, I think my provider knows the settings buts doesnt allow for thethering. Maybe thats the whole thing, stupid dutch providers.


Thanks alot alerino, I will try more later if you get your c6 to work I might try some other stuff.
 
I think I am in, it was all down to the correct user and password.


Ifconfig shows ppp0 :)


YESSSSSSSSSSSSSSSSSSSSSS Alerino you are an hero!!


how do I close the link correct


static.gif



(any dutchy that has a telfort subscription can PM me for dialup scripts)
 
Last edited by a moderator:
oh btw being a linux noob can I make these three commands (rfcomm bind, mknod, pppd call) into a bash script? Since they are all 'sudo'ed can I than do sudo script and have the three steps in one?
 
You must log in or register to reply here.

Similar threads

Eight Bit
Tethering
Replies
2
Views
1K
WizardStan
WizardStan
zapman
Umts 'stick' With Bluetooth But W/o Usb
Replies
10
Views
2K
zapman
zapman
timothee
3G Internet tethering over bluetooth with iphone?
Replies
9
Views
2K
TrashyMG
TrashyMG
L
USB tethering to Android
Replies
7
Views
2K
HelenF
H
MichaelXX2
Iphone Tethering?
Replies
4
Views
931
MichaelXX2
MichaelXX2
Back
Top