Pandora freezes while accessing sdcard or usb flash drive.

[madmuid]

Hi all,


I'm a lucky and very happy customer who about a week ago received his pandora (ordered in 2008) - it's a rebirth pandora


There's just one issue I can't find a workaround for - the pandora gets unresponsive (seems to freeze, no input is registered, mouse pointer can't be moved anymore etc) when large amounts of data is transferred.


I can always reproduce this by trying to start chromium.pnd from one of my two sdcards (transcend 16gb, sandisk 8gb both class 10) or an usb flash drive.


It doesn't matter if the pandora boots from NAND or from sdcard and it also happens with the experimental (3.2) kernel.


It doesn't matter if wifi is on (and connected) or off.


If I was connected via wifi to my local network when the pandora got unresponsive - I have about one minute to login to the pandora via ssh and issue an "sudo shutdown -h now" command. After that minue I can't connect via ssh anymore.


So something does still work (for short while) although the pandora seems to hang.


Lid settings are configured that the pandora should shutdown when the lid is closed - but once the pandora is unresponsive the closing of the lid is ignored...


Installing stuff to nand and running it is not a problem - only via sdcard and usb flash drive.


Any ideas would be greatly appreciated. (I did search this forum (and the german one) and also read the inofficial manual and the faq).


Thanks,


madmuid

 

[EvilDragon]

Hmm, never heard of such an issue before.


Could you try running top and see if the unit still works (although running slowly) and what task could cause the freeze?


Can you ping the unit from a different computer and see whether it really freezes or just slows down?


When logging in the unit with ssh, does dmesg say something weird within that minute?


You might want to try to reflash the SuperZaxxon-Beta firnware, maybe some software issue..?

 

[Darkknight512]

Hmm that does seem a little odd, try a reflash.


Maybe this has something to do with the SD card corruption fix that notaz put in the 3.2 kernel?

 

[skeezix]

FWIW, I've never really been able to use Chromium; others, fine, but not that. Somethign is really screwy with just that app, that causes all sorts of mayhem


jeff

 

[Linux-SWAT]

Do not use transcend cards with OP :


http://pandorawiki.org/SD_compatibility_list

 

[ardje]

Do not use transcend cards with OP :


http://pandorawiki.o...patibility_list

Actually I use transcend 32GB SDHC cards.


Since "those bugs were "fixed" in the kernel I haven't seen issues with any sd-cards, except for not being able to physically insert or remove them.


I even used the pandora with the cards as a USB stick to upgrade my sat-receiver .


(The pandora can be used as a very fast USB stick)

 

[ardje]

Hmmm, i hate the scoring system of that compatability list. There is none. Something like wine-app-db would be nice.


Anyway: I do not rely on that list. The transcend report is a year old, and things have changed since.


But the problem with that list is that you cannot determine how correct the report was and when it was reported.


So transcends are doing fine for me.

 

[madmuid]

Hi again,


thank you all for your kind advice!


>Can you ping the unit from a different computer and see whether it really freezes or just slows down?


For some reason my ssh connection does'nt drop after ca. a minute anymore.


Ping works - but that info is redundant as ssh currently doesn't lose the connection...


>Could you try running top and see if the unit still works (although running slowly) and what task could cause the freeze?


Here is a snapshot of top while pandoras gui is frozen - X takes a lot of cpu time - if I kill X the ssh connection is dropped.

Tasks: 100 total,   4 running,  96 sleeping,   0 stopped,   0 zombie

Cpu(s): 98.0%us,  0.7%sy,  0.0%ni,  0.0%id,  0.0%wa,  1.3%hi,  0.0%si,  0.0%st

Mem:	249564k total,   243984k used, 	5580k free,	34816k buffers

Swap:   795208k total,    	0k used,   795208k free,   120168k cached

  PID USER  	PR  NI  VIRT  RES  SHR S %CPU %MEM	TIME+  COMMAND                                                                                

1181 root  	20   0 20076  10m 6248 R 97.9  4.5   4:53.44 X                                                                                      

1658 muid  	20   0  200m  32m  21m S  1.7 13.2   0:13.81 chrome                                                                                  

1714 muid  	20   0  2344 1140  900 R  0.7  0.5   0:02.84 top                                                                                    

	1 root  	20   0  1564  572  508 S  0.0  0.2   0:02.43 init                                                                                    

	2 root  	15  -5 	0	0	0 S  0.0  0.0   0:00.00 kthreadd                                                                                

	3 root  	15  -5 	0	0	0 S  0.0  0.0   0:00.14 ksoftirqd/0                                                                            

	4 root  	RT  -5 	0	0	0 S  0.0  0.0   0:00.00 watchdog/0                                                                              

	5 root  	15  -5 	0	0	0 R  0.0  0.0   0:00.37 events/0                                                                                

	6 root  	15  -5 	0	0	0 S  0.0  0.0   0:00.00 khelper                                                                                

	7 root  	15  -5 	0	0	0 S  0.0  0.0   0:00.00 kblockd/0                                                                              

	8 root  	15  -5 	0	0	0 S  0.0  0.0   0:00.00 kseriod                                                                                

	9 root  	15  -5 	0	0	0 S  0.0  0.0   0:00.00 twl4030-irqchip                                                                        

   10 root  	15  -5 	0	0	0 S  0.0  0.0   0:00.00 twl4030-irq                                                                            

   11 root  	15  -5 	0	0	0 S  0.0  0.0   0:00.00 omap2_mcspi                                                                            

   12 root  	15  -5 	0	0	0 S  0.0  0.0   0:00.03 khubd                                                                                  

   13 root  	15  -5 	0	0	0 S  0.0  0.0   0:00.09 kmmcd                                                                                  

   14 root  	15  -5 	0	0	0 S  0.0  0.0   0:00.00 btaddconn

This is chrome - the gui froze when chrome wasn't finished with loading - even the mouse pointer still has the little wait icon:

>You might want to try to reflash the SuperZaxxon-Beta firnware, maybe some software issue..?

I will do that too - but later. I actuallly want to boot from sdcard. And I was doing so with the 8gb sandisk previously. An hour ago I used SD Installer 1.5 to prepare my transcend 16gb and booted from it. But the gui still freezes no matter if I boot from nand, or any sdcard (I also tried older 2gb and 1gb sdcards) - as long as I start .pnd programs from sdcard or usb. It doesn't have to be chrome either - I can play e. g. rick dangerous or lemmings for a while and after a few minutes the gui will freeze - it just takes longer to do so.

Starting .pnd from nand works.



>Do not use transcend cards with OP :

I will buy a more compatible sdcard soon and test again...



>When logging in the unit with ssh, does dmesg say something weird within that minute?

Here is the output of dmesg while the gui is frozen (chrome.pnd was started from a usb flash drive)



Thanks for your help!



madmuid

05780] NetWinder Floating Point Emulator V0.97 (double precision)

[ 1061.707397] VFS: Disk quotas dquot_6.5.1

[ 1061.707519] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)

[ 1061.708068] squashfs: version 4.0 (2009/01/31) Phillip Lougher

[ 1061.708953] aufs 2-27

[ 1061.708984] msgmni has been set to 487

[ 1061.709228] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)

[ 1061.709228] io scheduler noop registered

[ 1061.709259] io scheduler anticipatory registered (default)

[ 1061.709259] io scheduler deadline registered

[ 1061.709411] io scheduler cfq registered

[ 1061.719604] Serial: 8250/16550 driver4 ports, IRQ sharing enabled

[ 1061.741119] serial8250.0: ttyS0 at MMIO 0x49020000 (irq = 74) is a ST16654

[ 1061.741180] console [ttyS0] enabled

[ 1062.359588] brd: module loaded

[ 1062.364959] loop: module loaded

[ 1062.368286] set_opp: OPP 3 set

[ 1062.371429] pndctrl loaded.

[ 1062.374359] usbcore: registered new interface driver asix

[ 1062.379913] usbcore: registered new interface driver cdc_ether

[ 1062.385864] usbcore: registered new interface driver rndis_host

[ 1062.391876] i2c /dev entries driver

[ 1062.396423] input: power-button as /devices/virtual/input/input0

[ 1062.423706] triton2 power button driver initialized

[ 1062.429779] Driver 'sd' needs updating - please use bus_type methods

[ 1062.436370] omap2-nand driver initializing

[ 1062.441650] NAND device: Manufacturer ID: 0x2c, Chip ID: 0xbc (Micron NAND 512MiB 1,8V 16-bit)

[ 1062.450805] cmdlinepart partition parsing not available

[ 1062.456115] Creating 5 MTD partitions on "omap2-nand":

[ 1062.461273] 0x00000000-0x00080000 : "xloader"

[ 1062.466247] 0x00080000-0x00260000 : "uboot"

[ 1062.471466] 0x00260000-0x00280000 : "uboot-env"

[ 1062.476287] 0x00280000-0x00c80000 : "boot"

[ 1062.484893] 0x00c80000-0x20000000 : "rootfs"

[ 1062.702239] usbmon: debugfs is not available

[ 1062.706787] ehci-omap ehci-omap.0: OMAP-EHCI Host Controller

[ 1062.712799] ehci-omap ehci-omap.0: new USB bus registered, assigned bus number 1

[ 1062.720642] ehci-omap ehci-omap.0: irq 77, io mem 0x48064800

[ 1062.736083] ehci-omap ehci-omap.0: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004

[ 1062.744049] usb usb1: configuration #1 chosen from 1 choice

[ 1062.749847] hub 1-0:1.0: USB hub found

[ 1062.753723] hub 1-0:1.0: 3 ports detected

[ 1062.971038] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002

[ 1062.977844] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1

[ 1062.985168] usb usb1: Product: OMAP-EHCI Host Controller

[ 1062.990539] usb usb1: Manufacturer: Linux 2.6.27.57-omap1 ehci_hcd

[ 1062.996765] usb usb1: SerialNumber: ehci-omap.0

[ 1063.001403] Initializing USB Mass Storage driver...

[ 1063.006439] usbcore: registered new interface driver usb-storage

[ 1063.012542] USB Mass Storage support registered.

[ 1063.017272] usbcore: registered new interface driver libusual

[ 1063.023315] mice: PS/2 mouse device common for all mice

[ 1063.049224] input: gpio-keys as /devices/platform/gpio-keys/input/input1

[ 1063.119415] input: keypad as /devices/platform/i2c_omap.1/i2c-adapter/i2c-1/1-004a/twl4030_keypad/input/input2

[ 1063.150146] usb 1-2: new high speed USB device using ehci-omap and address 2

[ 1063.175048] input: nub0 as /devices/platform/i2c_omap.3/i2c-adapter/i2c-3/3-0066/input/input3

[ 1063.228790] input: nub1 as /devices/platform/i2c_omap.3/i2c-adapter/i2c-3/3-0067/input/input4

[ 1063.283447] twl4030_rtc twl4030_rtc: rtc core: registered twl4030_rtc as rtc0

[ 1063.294525] bq27x00-battery 3-0055: support ver. 1.1.0 enabled

[ 1063.300506] Bluetooth: HCI UART driver ver 2.2

[ 1063.304992] Bluetooth: HCI H4 protocol initialized

[ 1063.309814] Bluetooth: HCILL protocol initialized

[ 1063.314636] hci_h4p hci_h4p: Registering HCI H4P device

[ 1063.348449] usb 1-2: configuration #1 chosen from 1 choice

[ 1063.354797] scsi0 : SCSI emulation for USB Mass Storage devices

[ 1063.362182] usb 1-2: New USB device found, idVendor=154b, idProduct=0057

[ 1063.368988] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3

[ 1063.376159] usb 1-2: Product: USB 2.0 FD

[ 1063.380126] usb 1-2: Manufacturer: PNY Technologies

[ 1063.385070] usb 1-2: SerialNumber: AABC1E3143000016

[ 1063.389984] usb-storage: device found at 2

[ 1063.394134] usb-storage: waiting for device to settle before scanning

[ 1063.471008] mmci-omap mmci-omap.0: Failed to get debounce clock

[ 1063.579925] mmci-omap mmci-omap.1: Failed to get debounce clock

[ 1063.586944] mmci-omap mmci-omap.2: Failed to get debounce clock

[ 1063.593322] Registered led device: pandora::sd1

[ 1063.598022] Registered led device: pandora::sd2

[ 1063.602691] Registered led device: pandora::bluetooth

[ 1063.607910] Registered led device: pandora::wifi

[ 1063.612884] Registered led device: pandora::keypad_bl

[ 1063.618133] Registered led device: pandora::power

[ 1063.623229] Registered led device: pandora::charger

[ 1063.628387] usbcore: registered new interface driver usbhid

[ 1063.634002] usbhid: v2.6:USB HID core driver

[ 1063.638519] Advanced Linux Sound Architecture Driver Version 1.0.17.

[ 1063.645172] ASoC version 0.13.2

[ 1063.648468] OMAP3 Pandora SoC init

[ 1063.652099] TWL4030 Audio Codec init

[ 1063.657318] asoc: twl4030 <-> omap-mcbsp-dai-0 mapping ok

[ 1063.664245] asoc: twl4030 <-> omap-mcbsp-dai-1 mapping ok

[ 1063.677124] ALSA device list:

[ 1063.680114]   #0: omap3pandora (twl4030)

[ 1063.684356] TCP cubic registered

[ 1063.687622] NET: Registered protocol family 17

[ 1063.692169] NET: Registered protocol family 15

[ 1063.696655] Bluetooth: L2CAP ver 2.11

[ 1063.700378] Bluetooth: L2CAP socket layer initialized

[ 1063.705505] Bluetooth: SCO (Voice Link) ver 0.6

[ 1063.710052] Bluetooth: SCO socket layer initialized

[ 1063.715148] Bluetooth: RFCOMM socket layer initialized

[ 1063.720336] Bluetooth: RFCOMM TTY layer initialized

[ 1063.725280] Bluetooth: RFCOMM ver 1.10

[ 1063.729095] Bluetooth: BNEP (Ethernet Emulation) ver 1.3

[ 1063.734436] Bluetooth: HIDP (Human Interface Emulation) ver 1.2

[ 1063.740417] ThumbEE CPU extension supported.

[ 1063.744720] Disabling unused clock "sr2_fck"

[ 1063.749023] Disabling unused clock "sr1_fck"

[ 1063.753356] Disabling unused clock "mcbsp_fck"

[ 1063.757812] Disabling unused clock "mcbsp_fck"

[ 1063.762298] Disabling unused clock "mcbsp_fck"

[ 1063.766784] Disabling unused clock "mcbsp_ick"

[ 1063.771270] Disabling unused clock "mcbsp_ick"

[ 1063.775756] Disabling unused clock "mcbsp_ick"

[ 1063.780242] Disabling unused clock "gpt2_ick"

[ 1063.784637] Disabling unused clock "gpt3_ick"

[ 1063.789001] Disabling unused clock "gpt4_ick"

[ 1063.793426] Disabling unused clock "gpt5_ick"

[ 1063.797790] Disabling unused clock "gpt6_ick"

[ 1063.802215] Disabling unused clock "gpt7_ick"

[ 1063.806610] Disabling unused clock "gpt8_ick"

[ 1063.811004] Disabling unused clock "gpt9_ick"

[ 1063.815399] Disabling unused clock "wdt3_ick"

[ 1063.819763] Disabling unused clock "wdt3_fck"

[ 1063.824188] Disabling unused clock "gpio2_dbck"

[ 1063.828735] Disabling unused clock "gpio3_dbck"

[ 1063.833312] Disabling unused clock "gpio5_dbck"

[ 1063.837890] Disabling unused clock "gpt9_fck"

[ 1063.842285] Disabling unused clock "gpt8_fck"

[ 1063.846679] Disabling unused clock "gpt7_fck"

[ 1063.851074] Disabling unused clock "gpt6_fck"

[ 1063.855468] Disabling unused clock "gpt5_fck"

[ 1063.859863] Disabling unused clock "gpt4_fck"

[ 1063.864257] Disabling unused clock "gpt3_fck"

[ 1063.868621] Disabling unused clock "gpt2_fck"

[ 1063.873046] Disabling unused clock "gpt1_ick"

[ 1063.877441] Disabling unused clock "wdt1_ick"

[ 1063.881835] Disabling unused clock "wdt2_ick"

[ 1063.886230] Disabling unused clock "wdt2_fck"

[ 1063.890625] Disabling unused clock "gpio1_dbck"

[ 1063.895202] Disabling unused clock "gpt1_fck"

[ 1063.899566] Disabling unused clock "cam_ick"

[ 1063.903900] Disabling unused clock "cam_mclk"

[ 1063.908294] Disabling unused clock "des1_ick"

[ 1063.912689] Disabling unused clock "sha11_ick"

[ 1063.917175] Disabling unused clock "rng_ick"

[ 1063.921478] Disabling unused clock "aes1_ick"

[ 1063.925872] Disabling unused clock "ssi_ick"

[ 1063.930175] Disabling unused clock "mailboxes_ick"

[ 1063.934997] Disabling unused clock "mcbsp_ick"

[ 1063.939514] Disabling unused clock "mcbsp_ick"

[ 1063.943969] Disabling unused clock "gpt10_ick"

[ 1063.948455] Disabling unused clock "gpt11_ick"

[ 1063.952941] Disabling unused clock "uart2_ick"

[ 1063.957427] Disabling unused clock "i2c_ick"

[ 1063.961730] Disabling unused clock "hdq_ick"

[ 1063.966033] Disabling unused clock "mspro_ick"

[ 1063.970520] Disabling unused clock "des2_ick"

[ 1063.974914] Disabling unused clock "sha12_ick"

[ 1063.979400] Disabling unused clock "aes2_ick"

[ 1063.983795] Disabling unused clock "icr_ick"

[ 1063.988098] Disabling unused clock "pka_ick"

[ 1063.992401] Disabling unused clock "ssi_ssr_fck"

[ 1063.997070] Disabling unused clock "hdq_fck"

[ 1064.001342] Disabling unused clock "uart2_fck"

[ 1064.005859] Disabling unused clock "mcbsp_fck"

[ 1064.010345] Disabling unused clock "mcbsp_fck"

[ 1064.014801] Disabling unused clock "i2c_fck"

[ 1064.019134] Disabling unused clock "mspro_fck"

[ 1064.023590] Disabling unused clock "gpt11_fck"

[ 1064.028076] Disabling unused clock "gpt10_fck"

[ 1064.032562] Disabling unused clock "iva2_ck"

[ 1064.036865] Disabling unused clock "dpll4_m6x2_ck"

[ 1064.041717] Disabling unused clock "dpll4_m5x2_ck"

[ 1064.046539] Disabling unused clock "dpll3_m3x2_ck"

[ 1064.051391] Disabling unused clock "sys_clkout1"

[ 1064.056030] VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 1

[ 1064.094818] Console: switching to colour frame buffer device 100x30

[ 1064.277282] twl4030_rtc twl4030_rtc: setting system clock to 2012-03-16 23:49:51 UTC (1331941791)

[ 1064.286346] Waiting 2sec before mounting root device...

[ 1064.345092] mmc0: host does not support reading read-only switch. assuming write-enable.

[ 1064.353271] mmc0: new high speed SDHC card at address b368

[ 1064.359191] mmcblk0: mmc0:b368 SDC   15756288KiB

[ 1064.364257]  mmcblk0: p1 p2 p3

[ 1066.304504] kjournald starting.  Commit interval 5 seconds

[ 1066.313323] EXT3 FS on mmcblk0p3, internal journal

[ 1066.318206] EXT3-fs: mounted filesystem with ordered data mode.

[ 1066.324218] VFS: Mounted root (ext3 filesystem).

[ 1066.329040] Freeing init memory: 140K

[ 1067.588348] udev: starting version 151

[ 1068.589843] ads7846 spi1.0: touchscreen, irq 254

[ 1068.594512] ads7846 spi1.0: using vsync trigger

[ 1068.599761] input: touchscreen as /devices/platform/omap2_mcspi.1/spi1.0/input/input5

[ 1068.752258] Adding 795208k swap on /dev/mmcblk0p2.  Priority:-1 extents:1 across:795208k

[ 1068.902832] scsi 0:0:0:0: Direct-Access 	PNY  	USB 2.0 FD   	8192 PQ: 0 ANSI: 4

[ 1068.912719] sd 0:0:0:0: [sda] 31703040 512-byte hardware sectors (16232 MB)

[ 1068.921203] sd 0:0:0:0: [sda] Write Protect is off

[ 1068.926086] sd 0:0:0:0: [sda] Mode Sense: 43 00 00 00

[ 1068.931182] sd 0:0:0:0: [sda] Assuming drive cache: write through

[ 1068.939697] sd 0:0:0:0: [sda] 31703040 512-byte hardware sectors (16232 MB)

[ 1068.947723] sd 0:0:0:0: [sda] Write Protect is off

[ 1068.952545] sd 0:0:0:0: [sda] Mode Sense: 43 00 00 00

[ 1068.957672] sd 0:0:0:0: [sda] Assuming drive cache: write through

[ 1068.963867]  sda: sda1

[ 1068.968200] sd 0:0:0:0: [sda] Attached SCSI removable disk

[ 1068.976043] usb-storage: device scan complete

[ 1074.394561] sd 0:0:0:0: Attached scsi generic sg0 type 0

[ 1081.012878] FAT: invalid media value (0xb9)

[ 1081.017120] VFS: Can't find a valid FAT filesystem on dev sda.

[ 1081.277374] FAT: invalid media value (0xb9)

[ 1081.281616] VFS: Can't find a valid FAT filesystem on dev sda.

[ 1088.951416] fuse init (API version 7.9)

[ 1089.154235] NET: Registered protocol family 10

[ 1098.782958] dpll1_ck rate: 600000000

[ 1098.786590] arm_fck  rate: 600000000

[ 1098.790191] PLL_MPU  rate: 600000000

[ 1098.853820] input: nub0 as /devices/platform/i2c_omap.3/i2c-adapter/i2c-3/3-0066/input/input6

[ 1099.080444] input: nub1 as /devices/platform/i2c_omap.3/i2c-adapter/i2c-3/3-0067/input/input7

[ 1135.061492] Generic kernel compatibility enabled based on linux-next next-20100113

[ 1135.259704] cfg80211: Calling CRDA to update world regulatory domain

[ 1135.859405] lib80211: common routines for IEEE802.11 drivers

[ 1135.865203] lib80211_crypt: registered algorithm 'NULL'

[ 1135.899017] lib80211_crypt: registered algorithm 'TKIP'

[ 1135.931610] lib80211_crypt: registered algorithm 'WEP'

[ 1135.964080] lib80211_crypt: registered algorithm 'CCMP'

[ 1136.075561] Pandora WiFi: Probe started

[ 1136.103240] Sending insert event for MMC3...

[ 1136.107574] Pandora WiFi: Probe done

[ 1136.165222] mmc2: card claims to support voltages below the defined range. These will be ignored.

[ 1136.174194] mmc2: SDIO card claims to support the incompletely defined 'low voltage range'. This will be ignored.

[ 1136.185943] mmc2: new SDIO card at address 0001

[ 1136.275451] wl1251: using dedicated interrupt line

[ 1136.549591] phy0: Selected rate control algorithm 'minstrel'

[ 1136.556091] wl1251: loaded

[ 1136.558898] wl1251: initialized

[ 1138.423583] sdio_reset_comm():

[ 1138.439514] wl1251_sdio mmc2:0001:1: firmware: requesting wl1251-fw.bin

[ 1139.368957] wl1251: 154 tx blocks at 0x3b788, 35 rx blocks at 0x3a780

[ 1139.384582] wl1251: firmware booted (Rev 6.0.4.235)

[ 1139.423553] phy0: device now idle

[ 1139.549468] ADDRCONF(NETDEV_UP): wlan0: link is not ready

[ 1139.555480] wl1251: rare event: 00001000

[ 1154.965972] phy0: device no longer idle - scanning

[ 1155.790985] phy0: device now idle

[ 1155.797760] phy0: device no longer idle - scanning

[ 1155.818328] wl1251: rare event: 00001000

[ 1155.986145] wl1251: WARNING join timeout

[ 1156.783203] phy0: device now idle

[ 1156.790985] wl1251: rare event: 00001000

[ 1168.612976] phy0: device no longer idle - scanning

[ 1169.509796] phy0: device now idle

[ 1169.521087] phy0: device no longer idle - scanning

[ 1169.667358] wlan0: deauthenticating from cfb7dc2c by local choice (reason=3)

[ 1169.678588] wl1251: rare event: 00001000

[ 1169.759704] wlan0: authenticate with ce65a8e8 (try 1)

[ 1169.777038] wlan0: authenticated

[ 1169.780334] phy0: device now idle

[ 1169.788360] wlan0: associate with ce7289e8 (try 1)

[ 1169.793334] phy0: device no longer idle - working

[ 1169.931671] wl1251: rare event: 00001000

[ 1169.947692] wlan0: RX AssocResp from cfba201a (capab=0x431 status=0 aid=3)

[ 1169.954803] wlan0: associated

[ 1169.957824] phy0: Allocated STA ce6c15e8

[ 1169.962951] phy0: Inserted STA ce6c15e8

[ 1169.966827] phy0: WMM queue=2 aci=0 acm=0 aifs=3 cWmin=15 cWmax=1023 txop=0 uapsd=1

[ 1169.986297] phy0: WMM queue=3 aci=1 acm=0 aifs=7 cWmin=15 cWmax=1023 txop=0 uapsd=1

[ 1170.009857] phy0: WMM queue=1 aci=2 acm=0 aifs=2 cWmin=7 cWmax=15 txop=94 uapsd=1

[ 1170.033294] phy0: WMM queue=0 aci=3 acm=0 aifs=2 cWmin=3 cWmax=7 txop=47 uapsd=1

[ 1170.076507] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready

[ 1170.091522] phy0: WMM queue=2 aci=0 acm=0 aifs=3 cWmin=15 cWmax=1023 txop=0 uapsd=1

[ 1170.115600] phy0: WMM queue=3 aci=1 acm=0 aifs=7 cWmin=15 cWmax=1023 txop=0 uapsd=1

[ 1170.134796] phy0: WMM queue=1 aci=2 acm=0 aifs=2 cWmin=7 cWmax=15 txop=94 uapsd=1

[ 1170.158172] phy0: WMM queue=0 aci=3 acm=0 aifs=2 cWmin=3 cWmax=7 txop=47 uapsd=1

[ 1180.087768] wlan0: no IPv6 routers present

[ 1235.986389] aufs test_add:243:mount[1647]: uid/gid/perm /mnt/pnd/chromium 1000/1000/0775, 0/0/0777

 

[notaz]

I think I remember something about Chromium causing X to deadlock, so I guess it's what's happening there. There are some versions of Chromium out there that don't cause this. Should hopefully be fixed when the whole OS is finally updated to newer Angstrom..

 

[madmuid]

oh no - I just installed chrome to nand and the gui also froze while it was loading. Thanks notaz - you are right of course - I think I was to focused on chromium, I will do more tests and report back - sorry for the confusion.


madmuid

 

[DaMummy]

why are you installing anything like that to nand?

 

[madmuid]

>why are you installing anything like that to nand?


My intention was to make sure that my issues only had to do with sdcards or usb flash drives. I obviously don't want to use nand too much that's why I'm installing the os to sdcard in the first place.

 

[notaz]

If you are concerned about wear, NAND is using ubifs, with it's wandering tree it never writes to the same block many times and should be safe for OS use. Over pandora's existence there have been no reports of NAND wearing down.

 

[Linux-SWAT]

Sometimes, the NAND debate reminds me religious ones ^^.

 

[DaMummy]

except you can always add more religions to your mind, and can always replace your religion, but like your mind, you can't replace your nand so easily, and adding 50mb to nand is only asking for trouble, even if it only means filling up nand

 

[OmegaPhil]

I also have this issue when I start up chromium from my Sandisk 16GB Extreme card. I will test other apps tonight.

 

[notaz]

Install SZ beta5a:

 

[DaDaDaniel]

Chromium is actually some strange build for Chromium OS. It's not even possibly to quit it easily and throws (fake) low battery warnings from time to time. It's not that usable at the moment. So you might want look for a different browser instead of spending a lot of time to get this one to work.

 

[OmegaPhil]

Chromium is actually some strange build for Chromium OS. It's not even possibly to quit it easily and throws (fake) low battery warnings from time to time. It's not that usable at the moment. So you might want look for a different browser instead of spending a lot of time to get this one to work.

Chromium is the free software version of Chrome, I have been using it fairly regularly here on my Debian machine - it is a normal browser here at least.


Cheers notaz - will flash

 

[DaDaDaniel]

OmegaPhil, yes, I use it on my notebook as well, from time to time. I should have written THIS build of Chromium for the Pandora. Have you tried it?