I recently purchased an open pandora off ebay after alot of waiting and searching, hoping for a great item for programming and gaming. I am mostly pleased with the unit except the nubs don't seem to work correctly. They will sometimes only go in one direction and not the other, and the movement seems to vary, it is not any one direction it has issues with, it varies. IT is a first batch unit if that helps. Please let me know if anyone has had any similar issues and if so, then what was the solution. Thank you!
Nubs not working correctly
- Thread starter mjr3462
- Start date
Welcome to the club!
Try moving the nubs in circles for a while after each boot.
The autocalibration system works, but doesn't remember settings after a shutdown/reboot.
Having said this, suspend/powersaving works nicely in the superzaxxon (1.5x) firmware so there is no real reason to power off your pandora for any time period shorter than a week.
Try moving the nubs in circles for a while after each boot.
The autocalibration system works, but doesn't remember settings after a shutdown/reboot.
Having said this, suspend/powersaving works nicely in the superzaxxon (1.5x) firmware so there is no real reason to power off your pandora for any time period shorter than a week.
C
CocoCreekFisherman
Guest
Make sure you go to nubs setting in menu and check left nub to scroll and right nub to click/highlight . If you haven't already done so :wacko: .
Last edited:
ahahah
Active Member
- Joined
- Feb 13, 2010
- Messages
- 592
there is.
when you want to remove one sd card to insert it in a laptop for example.
this can't be made if the suspend mode is active.
i don't know if it can be made in the "normal" mode.
