Linksys USB WIFI dongle not working

[b_o_b]

I have a Linksys WUSB54GC works on my linux desktop and seems to be recognized by my Pandora ('s) but it doesn't automatically work after plugging it in. According to posts regarding USB WIFI dongles it should be working without setting it up. Hope someone can assist. 

[SIZE=14.3999996185303px] [/SIZE]

sudo iwconfig

 

Spoiler

lo no wireless extensions.

usb0 no wireless extensions.

wlan0 IEEE 802.11bg ESSIDff/any
Mode:Managed Access Point: Not-Associated Tx-Power=0 dBm
Retry long limit:7 RTS thrff Fragment thrff
Encryption keyff
Power Managementn

sudo lsusb -v

Spoiler

bus 002 Device 002: ID 13b1:0020 Linksys WUSB54GC 802.11g Adapter

[ralink rt73]
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 0 (Defined at Interface level)
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 64
idVendor 0x13b1 Linksys
idProduct 0x0020 WUSB54GC 802.11g Adapter [ralink rt73]
bcdDevice 0.01
iManufacturer 1 Cisco-Linksys
iProduct 2 Compact Wireless-G USB Adapter
iSerial 0
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 32
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0x80
(Bus Powered)
MaxPower 300mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 2
bInterfaceClass 255 Vendor Specific Class
bInterfaceSubClass 255 Vendor Specific Subclass
bInterfaceProtocol 255 Vendor Specific Protocol
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x01 EP 1 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Device Qualifier (for other device speed):
bLength 10
bDescriptorType 6
bcdUSB 2.00
bDeviceClass 0 (Defined at Interface level)
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 64
bNumConfigurations 1
Device Status: 0x0000
(Bus Powered)


Usage Type Data
wMaxPacketSize 0x0004 1x 4 bytes
bInterval 12
Hub Descriptor:
bLength 9
bDescriptorType 41
nNbrPorts 1
wHubCharacteristic 0x0011
Per-port power switching
No overcurrent protection
TT think time 8 FS bits
bPwrOn2PwrGood 5 * 2 milli seconds
bHubContrCurrent 0 milli Ampere
DeviceRemovable 0x02
PortPwrCtrlMask 0xff
Hub Port Status:
Port 1: 0000.0100 power
Device Status: 0x0001
Self Powered

Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 9 Hub
bDeviceSubClass 0 Unused
bDeviceProtocol 0 Full speed (or root) hub
bMaxPacketSize0 64
idVendor 0x1d6b Linux Foundation
idProduct 0x0002 2.0 root hub
bcdDevice 3.02
iManufacturer 3 Linux 3.2.63 ehci_hcd
iProduct 2 OMAP-EHCI Host Controller
iSerial 1 ehci-omap.0
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 25
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xe0
Self Powered
Remote Wakeup
MaxPower 0mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 9 Hub
bInterfaceSubClass 0 Unused
bInterfaceProtocol 0 Full speed (or root) hub
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0004 1x 4 bytes
bInterval 12
Hub Descriptor:
bLength 9
bDescriptorType 41
nNbrPorts 3
wHubCharacteristic 0x0009
Per-port power switching
Per-port overcurrent protection
bPwrOn2PwrGood 10 * 2 milli seconds
bHubContrCurrent 0 milli Ampere
DeviceRemovable 0x00
PortPwrCtrlMask 0xff
Hub Port Status:
Port 1: 0000.0100 power
Port 2: 0000.0503 highspeed power enable connect
Port 3: 0000.0100 power
Device Status: 0x0001
Self Powered

demsg (has some error messages) 

Spoiler

[ 41.935607] usb usb2: New USB device found, idVendor=1d6b,

idProduct=0002
[ 41.935607] usb usb2: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 41.935607] usb usb2: Product: OMAP-EHCI Host Controller
[ 41.935638] usb usb2: Manufacturer: Linux 3.2.63 ehci_hcd
[ 41.935638] usb usb2: SerialNumber: ehci-omap.0
[ 41.938171] hub 2-0:1.0: USB hub found
[ 41.938232] hub 2-0:1.0: 3 ports detected
[ 42.263366] usb 2-2: new high-speed USB device number 2 using
ehci-omap
[ 42.606079] usb 2-2: New USB device found, idVendor=13b1,
idProduct=0020
[ 42.606109] usb 2-2: New USB device strings: Mfr=1, Product=2,
SerialNumber=0
[ 42.606140] usb 2-2: Product: Compact Wireless-G USB Adapter
[ 42.606140] usb 2-2: Manufacturer: Cisco-Linksys
[ 43.195159] cfg80211: Calling CRDA to update world regulatory
domain
[ 43.443115] usb 2-2: reset high-speed USB device number 2 using
ehci-omap
[ 44.506744] ieee80211 phy0: Selected rate control algorithm 'pid'
[ 44.507720] Registered led device: rt73usb-phy0::radio
[ 44.507843] Registered led device: rt73usb-phy0::assoc
[ 44.507934] Registered led device: rt73usb-phy0::quality
[ 44.509582] usbcore: registered new interface driver rt73usb
[ 44.805877] rt73usb 2-2:1.0: firmware: requesting rt73.bin
[ 44.958465] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 48.024047] usb 2-2: USB disconnect, device number 2
[ 49.075805] usb 2-2: new high-speed USB device number 3 using
ehci-omap
[ 49.418090] usb 2-2: New USB device found, idVendor=13b1,
idProduct=0020
[ 49.418121] usb 2-2: New USB device strings: Mfr=1, Product=2,
SerialNumber=0
[ 49.418151] usb 2-2: Product: Compact Wireless-G USB Adapter
[ 49.418151] usb 2-2: Manufacturer: Cisco-Linksys
[ 49.552368] usb 2-2: reset high-speed USB device number 3 using
ehci-omap
[ 50.039367] ieee80211 phy1: Selected rate control algorithm 'pid'
[ 50.041412] Registered led device: rt73usb-phy1::radio
[ 50.041687] Registered led device: rt73usb-phy1::assoc
[ 50.041900] Registered led device: rt73usb-phy1::quality
[ 50.301513] rt73usb 2-2:1.0: firmware: requesting rt73.bin
[ 50.404296] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 50.758361] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 51.422668] usb 2-2: USB disconnect, device number 3
[ 51.422912] phy1 -> rt2x00usb_vendor_request: Error - Vendor
Request 0x06 failed for offset 0x308c with error -19.
[ 59.380493] usb 2-2: new high-speed USB device number 4 using
ehci-omap
[ 59.722808] usb 2-2: New USB device found, idVendor=13b1,
idProduct=0020
[ 59.722839] usb 2-2: New USB device strings: Mfr=1, Product=2,
SerialNumber=0
[ 59.722839] usb 2-2: Product: Compact Wireless-G USB Adapter
[ 59.722839] usb 2-2: Manufacturer: Cisco-Linksys
[ 59.857055] usb 2-2: reset high-speed USB device number 4 using
ehci-omap
[ 60.344299] ieee80211 phy2: Selected rate control algorithm 'pid'
[ 60.346435] Registered led device: rt73usb-phy2::radio
[ 60.346679] Registered led device: rt73usb-phy2::assoc
[ 60.346923] Registered led device: rt73usb-phy2::quality
[ 60.607604] rt73usb 2-2:1.0: firmware: requesting rt73.bin
[ 60.708862] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 60.902160] wpa_supplicant: unhandled page fault (11) at
0x00000000, code 0x017 (read)
[ 60.902191] wpa_supplicant: pc=4029d084 (libc-2.9.so+6d084),
lr=401e8acc
[ 72.563629] uncorrectable error :
[ 72.563751] uncorrectable error :
[ 72.563964] UBI warning: ubi_io_read: error -74 (ECC error) while
reading 1319 bytes from PEB 2697:69016, read only 1319 bytes, retry
[ 255.236511] usb 2-2: USB disconnect, device number 4
[ 255.966430] usb 2-2: new high-speed USB device number 5 using
ehci-omap
[ 256.308441] usb 2-2: New USB device found, idVendor=13b1,
idProduct=0020
[ 256.308471] usb 2-2: New USB device strings: Mfr=1, Product=2,
SerialNumber=0
[ 256.308471] usb 2-2: Product: Compact Wireless-G USB Adapter
[ 256.308502] usb 2-2: Manufacturer: Cisco-Linksys
[ 256.443023] usb 2-2: reset high-speed USB device number 5 using
ehci-omap
[ 256.929809] ieee80211 phy3: Selected rate control algorithm 'pid'
[ 256.930664] Registered led device: rt73usb-phy3::radio
[ 256.930755] Registered led device: rt73usb-phy3::assoc
[ 256.930877] Registered led device: rt73usb-phy3::quality
[ 262.869812] usb 2-2: USB disconnect, device number 5
[ 265.903900] usb 2-2: new high-speed USB device number 6 using
ehci-omap
[ 266.088043] usb 2-2: device descriptor read/all, error -71
[ 266.146087] hub 2-0:1.0: unable to enumerate USB device on port 2
[ 311.528961] usb 2-2: new high-speed USB device number 8 using
ehci-omap
[ 312.091369] usb 2-2: device not accepting address 8, error -71
[ 312.216369] usb 2-2: new high-speed USB device number 9 using
ehci-omap
[ 312.558410] usb 2-2: New USB device found, idVendor=13b1,
idProduct=0020
[ 312.558410] usb 2-2: New USB device strings: Mfr=1, Product=2,
SerialNumber=0
[ 312.558441] usb 2-2: Product: Compact Wireless-G USB Adapter
[ 312.558441] usb 2-2: Manufacturer: Cisco-Linksys
[ 312.692962] usb 2-2: reset high-speed USB device number 9 using
ehci-omap
[ 312.763336] phy4 -> rt2x00usb_vendor_request: Error - Vendor
Request 0x09 failed for offset 0x0000 with error -19.
[ 312.763580] phy4 -> rt73usb_init_eeprom: Error - Invalid RT
chipset detected.
[ 312.763763] phy4 -> rt2x00lib_probe_dev: Error - Failed to
allocate device.
[ 312.769165] usb 2-2: USB disconnect, device number 9
[ 313.240142] usb 2-2: new high-speed USB device number 10 using
ehci-omap
[ 313.310180] hub 2-0:1.0: unable to enumerate USB device on port 2
[ 313.708587] usb 2-2: new high-speed USB device number 11 using
ehci-omap
[ 314.050659] usb 2-2: New USB device found, idVendor=13b1,
idProduct=0020
[ 314.050689] usb 2-2: New USB device strings: Mfr=1, Product=2,
SerialNumber=0
[ 314.050689] usb 2-2: Product: Compact Wireless-G USB Adapter
[ 314.050720] usb 2-2: Manufacturer: Cisco-Linksys
[ 314.185150] usb 2-2: reset high-speed USB device number 11 using
ehci-omap
[ 314.672210] ieee80211 phy5: Selected rate control algorithm 'pid'
[ 314.673095] Registered led device: rt73usb-phy5::radio
[ 314.673187] Registered led device: rt73usb-phy5::assoc
[ 314.673278] Registered led device: rt73usb-phy5::quality
[ 322.580047] usb 2-2: USB disconnect, device number 11
[ 338.802337] usb 2-2: new high-speed USB device number 12 using
ehci-omap
[ 339.144531] usb 2-2: New USB device found, idVendor=13b1,
idProduct=0020
[ 339.144531] usb 2-2: New USB device strings: Mfr=1, Product=2,
SerialNumber=0
[ 339.144561] usb 2-2: Product: Compact Wireless-G USB Adapter
[ 339.144561] usb 2-2: Manufacturer: Cisco-Linksys
[ 339.278961] usb 2-2: reset high-speed USB device number 12 using
ehci-omap
[ 339.765869] ieee80211 phy6: Selected rate control algorithm 'pid'
[ 339.767364] Registered led device: rt73usb-phy6::radio
[ 339.767639] Registered led device: rt73usb-phy6::assoc
[ 339.767913] Registered led device: rt73usb-phy6::quality
[ 339.810974] usb 2-2: USB disconnect, device number 12
[ 340.396087] hub 2-0:1.0: unable to enumerate USB device on port 2
[ 372.376708] aufs test_add:261:mount[2253]: uid/gid/perm
/mnt/pnd/op_usbhost 1000/100/0755, 0/0/0777
[ 372.774353] ehci-omap ehci-omap.0: remove, state 4
[ 372.774383] usb usb2: USB disconnect, device number 1
[ 372.793701] ehci-omap ehci-omap.0: USB bus 2 deregistered
[ 378.847351] aufs test_add:261:mount[2474]: uid/gid/perm
/mnt/pnd/op_usbhost 1000/100/0755, 0/0/0777
[ 379.352233] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI)
Driver
[ 380.356994] ehci-omap ehci-omap.0: OMAP-EHCI Host Controller
[ 380.357025] sched: RT throttling activated
[ 380.357208] ehci-omap ehci-omap.0: new USB bus registered,
assigned bus number 2
[ 380.358276] ehci-omap ehci-omap.0: irq 77, io mem 0x48064800
[ 380.372619] ehci-omap ehci-omap.0: USB 2.0 started, EHCI 1.00
[ 380.372741] usb usb2: New USB device found, idVendor=1d6b,
idProduct=0002
[ 380.372772] usb usb2: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 380.372772] usb usb2: Product: OMAP-EHCI Host Controller
[ 380.372772] usb usb2: Manufacturer: Linux 3.2.63 ehci_hcd
[ 380.372802] usb usb2: SerialNumber: ehci-omap.0
[ 380.375488] hub 2-0:1.0: USB hub found
[ 380.375549] hub 2-0:1.0: 3 ports detected
[ 380.700805] usb 2-2: new high-speed USB device number 2 using
ehci-omap
[ 381.043304] usb 2-2: New USB device found, idVendor=13b1,
idProduct=0020
[ 381.043334] usb 2-2: New USB device strings: Mfr=1, Product=2,
SerialNumber=0
[ 381.043334] usb 2-2: Product: Compact Wireless-G USB Adapter
[ 381.043334] usb 2-2: Manufacturer: Cisco-Linksys
[ 381.177429] usb 2-2: reset high-speed USB device number 2 using
ehci-omap
[ 381.664733] ieee80211 phy7: Selected rate control algorithm 'pid'
[ 381.665588] Registered led device: rt73usb-phy7::radio
[ 381.665710] Registered led device: rt73usb-phy7::assoc
[ 381.665802] Registered led device: rt73usb-phy7::quality
[ 445.899017] usb 2-2: USB disconnect, device number 2
[ 446.224212] usb 2-2: new high-speed USB device number 3 using
ehci-omap
[ 446.566314] usb 2-2: New USB device found, idVendor=13b1,
idProduct=0020
[ 446.566345] usb 2-2: New USB device strings: Mfr=1, Product=2,
SerialNumber=0
[ 446.566345] usb 2-2: Product: Compact Wireless-G USB Adapter
[ 446.566375] usb 2-2: Manufacturer: Cisco-Linksys
[ 446.700775] usb 2-2: reset high-speed USB device number 3 using
ehci-omap
[ 447.187683] ieee80211 phy8: Selected rate control algorithm 'pid'
[ 447.189208] Registered led device: rt73usb-phy8::radio
[ 447.189453] Registered led device: rt73usb-phy8::assoc
[ 447.189758] Registered led device: rt73usb-phy8::quality
[ 474.330474] usb 2-2: USB disconnect, device number 3
[ 474.653900] usb 2-2: new high-speed USB device number 4 using
ehci-omap
[ 474.996032] usb 2-2: New USB device found, idVendor=13b1,
idProduct=0020
[ 474.996063] usb 2-2: New USB device strings: Mfr=1, Product=2,
SerialNumber=0
[ 474.996063] usb 2-2: Product: Compact Wireless-G USB Adapter
[ 474.996063] usb 2-2: Manufacturer: Cisco-Linksys
[ 475.130523] usb 2-2: reset high-speed USB device number 4 using
ehci-omap
[ 475.617401] ieee80211 phy9: Selected rate control algorithm 'pid'
[ 475.618286] Registered led device: rt73usb-phy9::radio
[ 475.618377] Registered led device: rt73usb-phy9::assoc
[ 475.618469] Registered led device: rt73usb-phy9::quality
[ 550.543792] usb 2-2: USB disconnect, device number 4
[ 550.872650] usb 2-2: new high-speed USB device number 5 using
ehci-omap
[ 551.214721] usb 2-2: New USB device found, idVendor=13b1,
idProduct=0020
[ 551.214752] usb 2-2: New USB device strings: Mfr=1, Product=2,
SerialNumber=0
[ 551.214752] usb 2-2: Product: Compact Wireless-G USB Adapter
[ 551.214782] usb 2-2: Manufacturer: Cisco-Linksys
[ 551.349273] usb 2-2: reset high-speed USB device number 5 using
ehci-omap
[ 551.836212] ieee80211 phy10: Selected rate control algorithm 'pid'
[ 551.837066] Registered led device: rt73usb-phy10::radio
[ 551.837188] Registered led device: rt73usb-phy10::assoc
[ 551.837280] Registered led device: rt73usb-phy10::quality

 

[notaz]

For whatever reason the device gets reset just after it's detected each time, maybe it wants too much power? Do you have powered hub to check if it's power related problem?

 

[Björn]

It could also be that the stick doesn't work properly with this kernel. The dude on this site seems to have had the same problem: http://marc-abramowitz.com/archives/2007/02/20/setting-up-a-linksys-wusb54gc-wlan-adapter-in-ubuntu/ . Maybe try and build this driver on the Pandora.

 

[b_o_b]

For whatever reason the device gets reset just after it's detected each time, maybe it wants too much power? Do you have powered hub to check if it's power related problem?

No I haven't and it seems the price of a powered hub is just as high as buying a new wifi dongle.  Worked on all my other laptops / netbooks (usually Ubuntu installed).  Any other method to check if this is the root cause? 

It could also be that the stick doesn't work properly with this kernel. The dude on this site seems to have had the same problem: http://marc-abramowitz.com/archives/2007/02/20/setting-up-a-linksys-wusb54gc-wlan-adapter-in-ubuntu/ . Maybe try and build this driver on the Pandora.

Thanks, but it seems like a pretty old post and I assume Notaz uses the most recent drivers? Any way to find out the driver version superzaxxon is using?

In the mean time I will try the dongle on my other Pandora - and maybe also try it with slackware.

 

[dimag0g]

For whatever reason the device gets reset just after it's detected each time, maybe it wants too much power? Do you have powered hub to check if it's power related problem?

It would be a surprise. My unit is able to power up all of my external HDDs, let alone wifi sticks.

 

[notaz]

I see wpa_supplicant crash in the logs, so I've pushed an update for it. Try running the update again and rebooting.

 

[b_o_b]

Thanks Notaz, it works now. Only problem is connection is very unstable and is often not able to connect. On my laptop the dongle will show a green light if it works and connection never fails. On the Pandora the green light doesn't turn on.

Here is full output of dmesg (didn't filter anything to be sure there is no useful info lost)

Spoiler

dmesg

[ 0.000000] Linux version 3.2.63 (notaz@pixelinis) (gcc version 4.5.2 (Sourcery G++ Lite 2011.03-41) ) #1046 Thu Oct 16 23:57:37 EEST 2014
[ 0.000000] CPU: ARMv7 Processor [411fc082] revision 2 (ARMv7), cr=10c5387d
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT nonaliasing instruction cache
[ 0.000000] Machine: Pandora Handheld Console
[ 0.000000] cma: CMA: reserved 4 MiB at 86000000
[ 0.000000] Initialized persistent memory from 80fe0000-80ffffff
[ 0.000000] cma: CMA: reserved 64 MiB at 8c000000
[ 0.000000] Memory policy: ECC disabled, Data cache writeback
[ 0.000000] On node 0 totalpages: 65536
[ 0.000000] free_area_init_node: node 0, pgdat c05af450, node_mem_map c05df000
[ 0.000000] Normal zone: 512 pages used for memmap
[ 0.000000] Normal zone: 0 pages reserved
[ 0.000000] Normal zone: 65024 pages, LIFO batch:15
[ 0.000000] OMAP3430/3530 ES2.1 (l2cache iva sgx neon isp )
[ 0.000000] Clocking rate (Crystal/Core/MPU): 26.0/332/500 MHz
[ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
[ 0.000000] pcpu-alloc: [0] 0
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 65024
[ 0.000000] Kernel command line: ubi.mtd=4 ubi.mtd=3 root=ubi0:rootfs rootfstype=ubifs rw rootflags=bulk_read vram=6272K omapfb.vram=0:3000K mmc_core.removable=0 quiet
[ 0.000000] PID hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
[ 0.000000] Memory: 256MB = 256MB total
[ 0.000000] Memory: 183948k/183948k available, 78196k reserved, 0K highmem
[ 0.000000] Virtual kernel memory layout:
[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
[ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
[ 0.000000] vmalloc : 0xd0800000 - 0xff000000 ( 744 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xd0000000 ( 256 MB)
[ 0.000000] modules : 0xbf000000 - 0xc0000000 ( 16 MB)
[ 0.000000] .text : 0xc0008000 - 0xc0541620 (5350 kB)
[ 0.000000] .init : 0xc0542000 - 0xc0572000 ( 192 kB)
[ 0.000000] .data : 0xc0572000 - 0xc05afbc0 ( 247 kB)
[ 0.000000] .bss : 0xc05afbe4 - 0xc05defd0 ( 189 kB)
[ 0.000000] SLUB: Genslabs=11, HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[ 0.000000] NR_IRQS:410
[ 0.000000] IRQ: Found an INTC at 0xfa200000 (revision 4.0) with 96 interrupts
[ 0.000000] Total of 96 interrupts on 1 active controller
[ 0.000000] OMAP clockevent source: GPTIMER1 at 32768 Hz
[ 0.000000] sched_clock: 32 bits at 32kHz, resolution 30517ns, wraps every 131071999ms
[ 0.000000] Console: colour dummy device 80x30
[ 0.000000] console [tty0] enabled
[ 0.000213] Calibrating delay loop... 497.82 BogoMIPS (lpj=1941504)
[ 0.039093] pid_max: default: 32768 minimum: 301
[ 0.039428] Mount-cache hash table entries: 512
[ 0.039916] Initializing cgroup subsys devices
[ 0.040008] CPU: Testing write buffer coherency: ok
[ 0.040283] hw perfevents: enabled with ARMv7 Cortex-A8 PMU driver, 5 counters available
[ 0.040435] Setting up static identity map for 0x803e56a8 - 0x803e5700
[ 0.041351] devtmpfs: initialized
[ 0.063385] print_constraints: dummy:
[ 0.069183] NET: Registered protocol family 16
[ 0.072082] DMA: preallocated 256 KiB pool for atomic coherent allocations
[ 0.072570] GPMC revision 5.0
[ 0.076782] OMAP GPIO hardware version 2.5
[ 0.081390] omap_mux_init: Add partition: #1: core, flags: 0
[ 0.090087] Reprogramming SDRC clock to 332000000 Hz
[ 0.093139] hw-breakpoint: debug architecture 0x4 unsupported.
[ 0.103149] omap-mcbsp.2: alias fck already exists
[ 0.103576] omap-mcbsp.3: alias fck already exists
[ 0.105529] OMAP DMA hardware revision 4.0
[ 0.125549] bio: create slab at 0
[ 0.127105] print_constraints: vwlan: 1800 mV
[ 0.129272] SCSI subsystem initialized
[ 0.132476] usbcore: registered new interface driver usbfs
[ 0.132812] usbcore: registered new interface driver hub
[ 0.133209] usbcore: registered new device driver usb
[ 0.148559] omap_i2c omap_i2c.1: bus 1 rev1.3.12 at 2600 kHz
[ 0.154052] twl4030: PIH (irq 7) chaining IRQs 368..375
[ 0.154174] twl4030: power (irq 373) chaining IRQs 376..383
[ 0.154876] twl4030: gpio (irq 368) chaining IRQs 384..401
[ 0.155456] _omap_mux_init_gpio: Could not set gpio192
[ 0.156951] _omap_mux_init_gpio: Could not set gpio193
[ 0.160400] print_constraints: VUSB1V5: 1500 mV normal standby
[ 0.161254] print_constraints: VUSB1V8: 1800 mV normal standby
[ 0.162109] print_constraints: VUSB3V1: 3100 mV normal standby
[ 0.218841] twl4030_usb twl4030_usb: Initialized TWL4030 USB module
[ 0.220703] print_constraints: vdd_mpu_iva: 600 <--> 1450 mV normal
[ 0.221557] print_constraints: vdd_core: 600 <--> 1450 mV normal
[ 0.222473] print_constraints: VMMC1: 1850 <--> 3150 mV at 3150 mV normal standby
[ 0.223419] print_constraints: VDAC: 1800 mV normal standby
[ 0.224304] print_constraints: VAUX2: 1800 mV normal standby
[ 0.225219] print_constraints: VPLL2: 1800 mV normal standby
[ 0.226196] print_constraints: VMMC2: 1850 <--> 3150 mV at 3150 mV normal standby
[ 0.227111] print_constraints: VSIM: 2800 mV normal standby
[ 0.227996] print_constraints: VAUX1: 3000 mV normal standby
[ 0.228851] print_constraints: VAUX4: 3000 mV normal standby
[ 0.242309] omap_i2c omap_i2c.3: bus 3 rev1.3.12 at 100 kHz
[ 0.245544] omap-iommu omap-iommu.0: isp registered
[ 0.246368] Advanced Linux Sound Architecture Driver Version 1.0.24.
[ 0.247436] Switching to clocksource 32k_counter
[ 0.277770] musb-hdrc: version 6.0, ?dma?, otg (peripheral+host)
[ 0.283569] musb-hdrc: ConfigData=0xde (UTMI-8, dyn FIFOs, bulk combine, bulk split, HB-ISO Rx, HB-ISO Tx, SoftConn)
[ 0.283599] musb-hdrc: MHDRC RTL version 1.400
[ 0.283630] musb-hdrc: setup fifo_mode 4
[ 0.283630] musb-hdrc: 28/31 max ep, 16384/16384 memory
[ 0.284301] musb-hdrc musb-hdrc: USB OTG mode controller at fa0ab000 using DMA, IRQ 92
[ 0.285858] NET: Registered protocol family 2
[ 0.296722] IP route cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.297119] TCP established hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.297363] TCP bind hash table entries: 8192 (order: 3, 32768 bytes)
[ 0.297485] TCP: Hash tables configured (established 8192 bind 8192)
[ 0.297485] TCP reno registered
[ 0.297515] UDP hash table entries: 256 (order: 0, 4096 bytes)
[ 0.297546] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[ 0.297851] NET: Registered protocol family 1
[ 0.298126] NetWinder Floating Point Emulator V0.97 (double precision)
[ 0.305114] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.326019] VFS: Disk quotas dquot_6.5.2
[ 0.326568] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.333038] msgmni has been set to 495
[ 0.335113] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.335144] io scheduler noop registered
[ 0.335144] io scheduler deadline registered
[ 0.335205] io scheduler cfq registered (default)
[ 0.350799] OMAP DSS rev 2.0
[ 0.355010] omap_uart.0: ttyO0 at MMIO 0x4806a000 (irq = 72) is a OMAP UART0
[ 0.355621] omap_uart.1: ttyO1 at MMIO 0x4806c000 (irq = 73) is a OMAP UART1
[ 0.356170] omap_uart.2: ttyO2 at MMIO 0x49020000 (irq = 74) is a OMAP UART2
[ 0.365203] loop: module loaded
[ 0.365570] platform iva.0: IVA freq set to 400MHz
[ 0.365631] OMAP overclocker loaded.
[ 0.368560] omap2-nand driver initializing
[ 0.368774] NAND device: Manufacturer ID: 0x2c, Chip ID: 0xbc (Micron NAND 512MiB 1,8V 16-bit)
[ 0.369323] Creating 5 MTD partitions on "omap2-nand.0":
[ 0.369384] 0x000000000000-0x000000080000 : "xloader"
[ 0.370391] 0x000000080000-0x000000260000 : "uboot"
[ 0.371582] 0x000000260000-0x000000280000 : "uboot-env"
[ 0.372436] 0x000000280000-0x000000c80000 : "boot"
[ 0.375244] 0x000000c80000-0x000020000000 : "rootfs"
[ 0.473754] UBI: attaching mtd4 to ubi0
[ 1.571807] UBI: scanning is finished
[ 1.589294] UBI: attached mtd4 (name "rootfs", size 499 MiB) to ubi0
[ 1.589324] UBI: PEB size: 131072 bytes (128 KiB), LEB size: 129024 bytes
[ 1.589324] UBI: min./max. I/O unit sizes: 2048/2048, sub-page size 512
[ 1.589355] UBI: VID header offset: 512 (aligned 512), data offset: 2048
[ 1.589355] UBI: good PEBs: 3994, bad PEBs: 2, corrupted PEBs: 0
[ 1.589385] UBI: user volume: 1, internal volumes: 1, max. volumes count: 128
[ 1.589416] UBI: max/mean erase counter: 25/2, WL threshold: 4096, image sequence number: 605519737
[ 1.589416] UBI: available PEBs: 0, total reserved PEBs: 3994, PEBs reserved for bad PEB handling: 39
[ 1.589477] UBI: attaching mtd3 to ubi1
[ 1.589965] UBI: background thread "ubi_bgt0d" started, PID 524
[ 1.612335] UBI: scanning is finished
[ 1.621032] UBI: attached mtd3 (name "boot", size 10 MiB) to ubi1
[ 1.621063] UBI: PEB size: 131072 bytes (128 KiB), LEB size: 129024 bytes
[ 1.621063] UBI: min./max. I/O unit sizes: 2048/2048, sub-page size 512
[ 1.621093] UBI: VID header offset: 512 (aligned 512), data offset: 2048
[ 1.621093] UBI: good PEBs: 80, bad PEBs: 0, corrupted PEBs: 0
[ 1.621124] UBI: user volume: 1, internal volumes: 1, max. volumes count: 128
[ 1.621124] UBI: max/mean erase counter: 12/4, WL threshold: 4096, image sequence number: 1553854050
[ 1.621154] UBI: available PEBs: 0, total reserved PEBs: 80, PEBs reserved for bad PEB handling: 2
[ 1.621429] UBI: background thread "ubi_bgt1d" started, PID 529
[ 1.621551] usbcore: registered new interface driver libusual
[ 1.622436] mousedev: PS/2 mouse device common for all mice
[ 1.623291] input: keypad as /devices/platform/omap_i2c.1/i2c-1/1-004a/twl4030_keypad/input/input0
[ 1.627441] input: power-button as /devices/platform/omap_i2c.1/i2c-1/1-0049/twl4030_pwrbutton/input/input1
[ 1.629089] input: nub0 as /devices/platform/omap_i2c.3/i2c-3/3-0066/input/input2
[ 1.630920] input: nub1 as /devices/platform/omap_i2c.3/i2c-3/3-0067/input/input3
[ 1.637634] twl_rtc twl_rtc: rtc core: registered twl_rtc as rtc0
[ 1.638946] i2c /dev entries driver
[ 1.643890] bq27x00-battery 3-0055: support ver. 1.2.0 enabled
[ 1.672424] OMAP Watchdog Timer Rev 0x31: initial timeout 60 sec
[ 1.672943] twl4030_wdt twl4030_wdt: Failed to register misc device
[ 1.673004] twl4030_wdt: probe of twl4030_wdt failed with error -16
[ 1.673645] voltdm_scale: No voltage scale API registered for vdd_mpu_iva
[ 1.673675] platform mpu.0: omap_target: unable to scale voltage up.
[ 1.674102] cpuidle: using governor ladder
[ 1.674133] cpuidle: using governor menu
[ 1.674743] omap_hsmmc omap_hsmmc.0: multiblock reads disabled due to 35xx erratum 2.1.1.128; MMC read performance may suffer
[ 1.900207] Registered led device: pandora::sd1
[ 1.900512] Registered led device: pandora::sd2
[ 1.900787] Registered led device: pandora::bluetooth
[ 1.901062] Registered led device: pandora::wifi
[ 1.902374] Registered led device: pandora::keypad_bl
[ 1.903472] Registered led device: pandora:ower
[ 1.921905] Registered led device: pandora::charger
[ 1.923400] usbcore: registered new interface driver usbhid
[ 1.923400] usbhid: USB HID core driver
[ 1.923614] persistent_ram: found existing buffer, size 114660, start 64123
[ 2.330749] console [ram-1] enabled
[ 2.333587] OMAP3 Pandora SoC init
[ 2.410369] asoc: twl4030-hifi <-> omap-mcbsp-dai.1 mapping ok
[ 2.412506] asoc: twl4030-hifi <-> omap-mcbsp-dai.3 mapping ok
[ 2.415435] ALSA device list:
[ 2.415435] #0: omap3pandora
[ 2.415618] TCP cubic registered
[ 2.415618] NET: Registered protocol family 17
[ 2.415679] Registering the dns_resolver key type
[ 2.415740] VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 1
[ 2.415771] ThumbEE CPU extension supported.
[ 2.415832] Registering SWP/SWPB emulation handler
[ 2.419555] PM: no software I/O chain control; some wakeups may be lost
[ 2.422973] clock: disabling unused clocks to save power
[ 2.424407] registered taskstats version 1
[ 2.448730] Console: switching to colour frame buffer device 100x30
[ 2.633117] regulator_init_complete: VAUX2: incomplete constraints, leaving on
[ 2.633270] regulator_init_complete: VDAC: incomplete constraints, leaving on
[ 2.635864] input: gpio-keys as /devices/platform/gpio-keys/input/input4
[ 2.637512] twl_rtc twl_rtc: setting system clock to 2014-10-21 17:15:59 UTC (1413911759)
[ 2.639801] UBIFS: background thread "ubifs_bgt0_0" started, PID 628
[ 2.680023] UBIFS: recovery needed
[ 2.935485] mmc0: host does not support reading read-only switch. assuming write-enable.
[ 2.938537] mmc0: new high speed SDHC card at address e624
[ 2.940399] mmcblk0: mmc0:e624 SD32G 29.7 GiB
[ 2.948730] mmcblk0: p1
[ 3.054992] UBIFS: recovery completed
[ 3.055114] UBIFS: mounted UBI device 0, volume 0, name "rootfs"(null)
[ 3.055145] UBIFS: LEB size: 129024 bytes (126 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
[ 3.055175] UBIFS: FS size: 508354560 bytes (484 MiB, 3940 LEBs), journal size 9033728 bytes (8 MiB, 71 LEBs)
[ 3.055206] UBIFS: reserved for root: 0 bytes (0 KiB)
[ 3.055236] UBIFS: media format: w4/r0 (latest is w4/r0), UUID 59E510AB-F7C9-470C-8ED4-C77669F5DEE5, small LPT model
[ 3.057189] VFS: Mounted root (ubifs filesystem) on device 0:14.
[ 3.058288] devtmpfs: mounted
[ 3.058807] Freeing init memory: 192K
[ 3.183227] mmc1: host does not support reading read-only switch. assuming write-enable.
[ 3.186431] mmc1: new high speed SDHC card at address aaaa
[ 3.188629] mmcblk1: mmc1:aaaa SU32G 29.7 GiB
[ 3.200103] mmcblk1: p1
[ 4.060821] udevd (683): /proc/683/oom_adj is deprecated, please use /proc/683/oom_score_adj instead.
[ 6.365417] ads7846 spi1.0: touchscreen, irq 254
[ 6.366363] input: touchscreen as /devices/platform/omap2_mcspi.1/spi_master/spi1/spi1.0/input/input5
[ 6.900024] FAT-fs (mmcblk1): bogus number of reserved sectors
[ 6.900177] FAT-fs (mmcblk1): Can't find a valid FAT filesystem
[ 6.990509] FAT-fs (mmcblk0): invalid media value (0x00)
[ 6.990753] FAT-fs (mmcblk0): Can't find a valid FAT filesystem
[ 7.527893] FAT-fs (mmcblk1): bogus number of reserved sectors
[ 7.528045] FAT-fs (mmcblk1): Can't find a valid FAT filesystem
[ 7.671264] FAT-fs (mmcblk0): invalid media value (0x00)
[ 7.671539] FAT-fs (mmcblk0): Can't find a valid FAT filesystem
[ 8.422668] alignment: ignoring faults is unsafe on this CPU. Defaulting to fixup mode.
[ 8.706756] fuse init (API version 7.17)
[ 8.846862] NET: Registered protocol family 10
[ 9.040557] zram: module is from the staging directory, the quality is unknown, you have been warned.
[ 9.042968] zram: num_devices not specified. Using default: 1
[ 9.042968] zram: Creating 1 devices ...
[ 9.254669] UBIFS: background thread "ubifs_bgt1_0" started, PID 1062
[ 9.299957] UBIFS: recovery needed
[ 9.379119] UBIFS: recovery completed
[ 9.379241] UBIFS: mounted UBI device 1, volume 0, name "boot"(null)
[ 9.379272] UBIFS: LEB size: 129024 bytes (126 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
[ 9.379302] UBIFS: FS size: 8386560 bytes (7 MiB, 65 LEBs), journal size 1032193 bytes (0 MiB, 6 LEBs)
[ 9.379333] UBIFS: reserved for root: 396117 bytes (386 KiB)
[ 9.379364] UBIFS: media format: w4/r0 (latest is w4/r0), UUID A3D1FF19-FEAA-4E51-9621-F29A782A55BF, small LPT model
[ 9.888885] zram: disk size not provided. You can use disksize_kb module param to specify size.
[ 9.888916] Using default: (25% of RAM).
[ 9.889343] FAT-fs (zram0): bogus number of reserved sectors
[ 9.889465] FAT-fs (zram0): Can't find a valid FAT filesystem
[ 10.534210] FAT-fs (zram0): bogus number of reserved sectors
[ 10.534454] FAT-fs (zram0): Can't find a valid FAT filesystem
[ 13.958038] input: nub0 as /devices/platform/omap_i2c.3/i2c-3/3-0066/input/input6
[ 14.044708] input: nub1 as /devices/platform/omap_i2c.3/i2c-3/3-0067/input/input7
[ 14.160369] Adding 63436k swap on /dev/zram0. Priority:5 extents:1 across:63436k SS
[ 14.995941] SGX clock rate: 110666666
[ 15.987457] gadget: using random self ethernet address
[ 15.987487] gadget: using random host ethernet address
[ 15.992523] usb0: MAC 8a:4d:10:1c:ee:cf
[ 15.992523] usb0: HOST MAC 22:28:99:cb:04:1a
[ 16.004669] gadget: CDC Composite Gadget, version: King Kamehameha Day 2008
[ 16.004699] gadget: g_cdc ready
[ 16.015655] musb-hdrc musb-hdrc: MUSB HDRC host driver
[ 16.015808] musb-hdrc musb-hdrc: new USB bus registered, assigned bus number 1
[ 16.015960] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 16.015991] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 16.015991] usb usb1: Product: MUSB HDRC host driver
[ 16.016021] usb usb1: Manufacturer: Linux 3.2.63 musb-hcd
[ 16.016021] usb usb1: SerialNumber: musb-hdrc
[ 16.019012] hub 1-0:1.0: USB hub found
[ 16.019073] hub 1-0:1.0: 1 port detected
[ 16.769561] omapfb omapfb: setup_plane failed
[ 344.165466] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 344.377044] aufs 3.2-20120109
[ 344.403137] aufs test_add:261:mount[1731]: uid/gid/perm /mnt/pnd/retroradio 1000/1001/0755, 0/0/0777
[ 358.503784] aufs test_add:261:mount[1954]: uid/gid/perm /mnt/pnd/retroradio 1000/1001/0755, 0/0/0777
[ 379.040283] aufs test_add:261:mount[2174]: uid/gid/perm /mnt/pnd/op_usbhost 1000/100/0755, 0/0/0777
[ 379.654083] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 380.661651] ehci-omap ehci-omap.0: OMAP-EHCI Host Controller
[ 380.661682] sched: RT throttling activated
[ 380.661956] ehci-omap ehci-omap.0: new USB bus registered, assigned bus number 2
[ 380.663024] ehci-omap ehci-omap.0: irq 77, io mem 0x48064800
[ 380.677642] ehci-omap ehci-omap.0: USB 2.0 started, EHCI 1.00
[ 380.677764] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 380.677764] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 380.677795] usb usb2: Product: OMAP-EHCI Host Controller
[ 380.677795] usb usb2: Manufacturer: Linux 3.2.63 ehci_hcd
[ 380.677795] usb usb2: SerialNumber: ehci-omap.0
[ 380.680297] hub 2-0:1.0: USB hub found
[ 380.680358] hub 2-0:1.0: 3 ports detected
[ 381.005523] usb 2-2: new high-speed USB device number 2 using ehci-omap
[ 381.348815] usb 2-2: New USB device found, idVendor=13b1, idProduct=0020
[ 381.348846] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 381.348846] usb 2-2: Product: Compact Wireless-G USB Adapter
[ 381.348876] usb 2-2: Manufacturer: Cisco-Linksys
[ 381.929443] cfg80211: Calling CRDA to update world regulatory domain
[ 382.185211] usb 2-2: reset high-speed USB device number 2 using ehci-omap
[ 382.515411] usb 2-2: USB disconnect, device number 2
[ 382.517242] phy0 -> rt2x00usb_vendor_request: Error - Vendor Request 0x09 failed for offset 0x0000 with error -19.
[ 382.517456] phy0 -> rt73usb_init_eeprom: Error - Invalid RT chipset detected.
[ 382.517547] phy0 -> rt2x00lib_probe_dev: Error - Failed to allocate device.
[ 382.520599] usbcore: registered new interface driver rt73usb
[ 383.099426] usb 2-2: new high-speed USB device number 3 using ehci-omap
[ 383.442443] usb 2-2: New USB device found, idVendor=13b1, idProduct=0020
[ 383.442443] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 383.442474] usb 2-2: Product: Compact Wireless-G USB Adapter
[ 383.442474] usb 2-2: Manufacturer: Cisco-Linksys
[ 383.575958] usb 2-2: reset high-speed USB device number 3 using ehci-omap
[ 384.329559] ieee80211 phy1: Selected rate control algorithm 'pid'
[ 384.331665] Registered led device: rt73usb-phy1::radio
[ 384.332000] Registered led device: rt73usb-phy1::assoc
[ 384.332275] Registered led device: rt73usb-phy1::quality
[ 384.556121] rt73usb 2-2:1.0: firmware: requesting rt73.bin
[ 384.698822] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 386.815917] usb 2-2: USB disconnect, device number 3
[ 388.653961] usb 2-2: new high-speed USB device number 4 using ehci-omap
[ 388.996459] usb 2-2: New USB device found, idVendor=13b1, idProduct=0020
[ 388.996459] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 388.996490] usb 2-2: Product: Compact Wireless-G USB Adapter
[ 388.996490] usb 2-2: Manufacturer: Cisco-Linksys
[ 389.130493] usb 2-2: reset high-speed USB device number 4 using ehci-omap
[ 389.617889] ieee80211 phy2: Selected rate control algorithm 'pid'
[ 389.619964] Registered led device: rt73usb-phy2::radio
[ 389.620208] Registered led device: rt73usb-phy2::assoc
[ 389.620544] Registered led device: rt73usb-phy2::quality
[ 389.845886] rt73usb 2-2:1.0: firmware: requesting rt73.bin
[ 389.973144] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 501.130187] Bluetooth: Core ver 2.16
[ 501.232879] NET: Registered protocol family 31
[ 501.232910] Bluetooth: HCI device and connection manager initialized
[ 501.232910] Bluetooth: HCI socket layer initialized
[ 501.232910] Bluetooth: L2CAP socket layer initialized
[ 501.242553] Bluetooth: SCO socket layer initialized
[ 521.142242] wlan0: authenticate with ec:55:f9:9c:08:3c (try 1)
[ 521.145568] wlan0: authenticated
[ 521.175567] wlan0: associate with ec:55:f9:9c:08:3c (try 1)
[ 521.183258] wlan0: RX AssocResp from ec:55:f9:9c:08:3c (capab=0x411 status=0 aid=6)
[ 521.183288] wlan0: associated
[ 521.200866] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 531.708587] wlan0: no IPv6 routers present
[ 532.940490] aufs test_add:261:mount[2855]: uid/gid/perm /mnt/pnd/op_switchgui 1000/1000/0755, 0/0/0777
[ 595.146179] usb 2-2: USB disconnect, device number 4
[ 595.147277] wlan0: deauthenticating from ec:55:f9:9c:08:3c by local choice (reason=3)
[ 595.157379] cfg80211: Calling CRDA to update world regulatory domain
[ 596.427032] usb 2-2: new high-speed USB device number 5 using ehci-omap
[ 596.769836] usb 2-2: New USB device found, idVendor=13b1, idProduct=0020
[ 596.769866] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 596.769866] usb 2-2: Product: Compact Wireless-G USB Adapter
[ 596.769866] usb 2-2: Manufacturer: Cisco-Linksys
[ 596.903900] usb 2-2: reset high-speed USB device number 5 using ehci-omap
[ 597.391143] ieee80211 phy3: Selected rate control algorithm 'pid'
[ 597.391998] Registered led device: rt73usb-phy3::radio
[ 597.392089] Registered led device: rt73usb-phy3::assoc
[ 597.392211] Registered led device: rt73usb-phy3::quality
[ 597.836791] rt73usb 2-2:1.0: firmware: requesting rt73.bin
[ 597.942596] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 601.760437] wlan0: authenticate with ec:55:f9:9c:08:3c (try 1)
[ 601.762695] wlan0: authenticated
[ 601.782287] wlan0: associate with ec:55:f9:9c:08:3c (try 1)
[ 601.785217] wlan0: RX AssocResp from ec:55:f9:9c:08:3c (capab=0x411 status=0 aid=6)
[ 601.785247] wlan0: associated
[ 601.796844] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 604.604125] usb 2-2: USB disconnect, device number 5
[ 604.626983] wlan0: deauthenticating from ec:55:f9:9c:08:3c by local choice (reason=3)
[ 604.633758] cfg80211: Calling CRDA to update world regulatory domain
[ 606.791656] usb 2-2: new high-speed USB device number 6 using ehci-omap
[ 607.134277] usb 2-2: New USB device found, idVendor=13b1, idProduct=0020
[ 607.134307] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 607.134307] usb 2-2: Product: Compact Wireless-G USB Adapter
[ 607.134338] usb 2-2: Manufacturer: Cisco-Linksys
[ 607.268371] usb 2-2: reset high-speed USB device number 6 using ehci-omap
[ 607.757507] ieee80211 phy4: Selected rate control algorithm 'pid'
[ 607.758361] Registered led device: rt73usb-phy4::radio
[ 607.758483] Registered led device: rt73usb-phy4::assoc
[ 607.758575] Registered led device: rt73usb-phy4::quality
[ 608.772888] rt73usb 2-2:1.0: firmware: requesting rt73.bin
[ 608.876220] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 612.634796] wlan0: authenticate with ec:55:f9:9c:08:3c (try 1)
[ 612.638153] wlan0: authenticated
[ 612.660064] wlan0: associate with ec:55:f9:9c:08:3c (try 1)
[ 612.665344] wlan0: RX AssocResp from ec:55:f9:9c:08:3c (capab=0x411 status=0 aid=6)
[ 612.665374] wlan0: associated
[ 612.680297] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 623.440673] wlan0: no IPv6 routers present
[ 624.339569] usb 2-2: USB disconnect, device number 6
[ 624.369445] wlan0: deauthenticating from ec:55:f9:9c:08:3c by local choice (reason=3)
[ 624.369934] cfg80211: Calling CRDA to update world regulatory domain
[ 626.520233] usb 2-2: new high-speed USB device number 7 using ehci-omap
[ 626.862579] usb 2-2: New USB device found, idVendor=13b1, idProduct=0020
[ 626.862609] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 626.862609] usb 2-2: Product: Compact Wireless-G USB Adapter
[ 626.862640] usb 2-2: Manufacturer: Cisco-Linksys
[ 626.996978] usb 2-2: reset high-speed USB device number 7 using ehci-omap
[ 627.484069] ieee80211 phy5: Selected rate control algorithm 'pid'
[ 627.485809] rt73usb 2-2:1.0: firmware: requesting rt73.bin
[ 627.486755] Registered led device: rt73usb-phy5::radio
[ 627.487335] Registered led device: rt73usb-phy5::assoc
[ 627.487640] Registered led device: rt73usb-phy5::quality
[ 627.602905] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 628.434509] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 628.698638] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 630.343902] usb 2-2: USB disconnect, device number 7
[ 630.347991] phy5 -> rt2x00usb_vendor_request: Error - Vendor Request 0x06 failed for offset 0x3090 with error -19.
[ 630.639404] usb 2-2: new high-speed USB device number 8 using ehci-omap
[ 641.442047] hub 2-0:1.0: unable to enumerate USB device on port 2
[ 643.646209] usb 2-2: new high-speed USB device number 9 using ehci-omap
[ 643.989990] usb 2-2: New USB device found, idVendor=13b1, idProduct=0020
[ 643.989990] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 643.990020] usb 2-2: Product: Compact Wireless-G USB Adapter
[ 643.990020] usb 2-2: Manufacturer: Cisco-Linksys
[ 644.123016] usb 2-2: reset high-speed USB device number 9 using ehci-omap
[ 644.611358] ieee80211 phy6: Selected rate control algorithm 'pid'
[ 644.613250] Registered led device: rt73usb-phy6::radio
[ 644.613525] Registered led device: rt73usb-phy6::assoc
[ 644.613769] Registered led device: rt73usb-phy6::quality
[ 644.883087] rt73usb 2-2:1.0: firmware: requesting rt73.bin
[ 644.989318] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 655.003967] wlan0: authenticate with ec:55:f9:9c:08:3c (try 1)
[ 655.007751] wlan0: authenticated
[ 655.028228] wlan0: associate with ec:55:f9:9c:08:3c (try 1)
[ 655.033355] wlan0: RX AssocResp from ec:55:f9:9c:08:3c (capab=0x411 status=0 aid=6)
[ 655.033386] wlan0: associated
[ 655.048065] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 662.585815] usb 2-2: USB disconnect, device number 9
[ 662.614990] wlan0: deauthenticating from ec:55:f9:9c:08:3c by local choice (reason=3)
[ 662.615203] cfg80211: Calling CRDA to update world regulatory domain
[ 663.163757] usb 2-2: new high-speed USB device number 10 using ehci-omap
[ 663.506317] usb 2-2: New USB device found, idVendor=13b1, idProduct=0020
[ 663.506347] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 663.506347] usb 2-2: Product: Compact Wireless-G USB Adapter
[ 663.506347] usb 2-2: Manufacturer: Cisco-Linksys
[ 663.640289] usb 2-2: reset high-speed USB device number 10 using ehci-omap
[ 664.127532] ieee80211 phy7: Selected rate control algorithm 'pid'
[ 664.128387] Registered led device: rt73usb-phy7::radio
[ 664.128479] Registered led device: rt73usb-phy7::assoc
[ 664.128570] Registered led device: rt73usb-phy7::quality
[ 664.885772] rt73usb 2-2:1.0: firmware: requesting rt73.bin
[ 665.010620] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 667.055419] usb 2-2: USB disconnect, device number 10
[ 667.061096] phy7 -> rt2x00usb_vendor_request: Error - Vendor Request 0x06 failed for offset 0x3090 with error -19.
[ 667.618865] usb 2-2: new high-speed USB device number 11 using ehci-omap
[ 667.961486] usb 2-2: New USB device found, idVendor=13b1, idProduct=0020
[ 667.961517] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 667.961547] usb 2-2: Product: Compact Wireless-G USB Adapter
[ 667.961547] usb 2-2: Manufacturer: Cisco-Linksys
[ 668.095672] usb 2-2: reset high-speed USB device number 11 using ehci-omap
[ 668.582977] ieee80211 phy8: Selected rate control algorithm 'pid'
[ 668.584960] Registered led device: rt73usb-phy8::radio
[ 668.585235] Registered led device: rt73usb-phy8::assoc
[ 668.585479] Registered led device: rt73usb-phy8::quality
[ 668.936737] rt73usb 2-2:1.0: firmware: requesting rt73.bin
[ 669.095306] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 669.710693] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 672.582641] wlan0: authenticate with ec:55:f9:9c:08:3c (try 1)
[ 672.585021] wlan0: authenticated
[ 672.616973] wlan0: associate with ec:55:f9:9c:08:3c (try 1)
[ 672.620056] wlan0: RX AssocResp from ec:55:f9:9c:08:3c (capab=0x411 status=0 aid=6)
[ 672.620056] wlan0: associated
[ 672.637878] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 683.658111] wlan0: no IPv6 routers present
[ 716.727508] aufs test_add:261:mount[3841]: uid/gid/perm /mnt/pnd/retroradio 1000/1001/0755, 0/0/0777
[ 834.297943] usb 2-2: USB disconnect, device number 11
[ 834.329925] wlan0: deauthenticating from ec:55:f9:9c:08:3c by local choice (reason=3)
[ 834.330108] cfg80211: Calling CRDA to update world regulatory domain
[ 835.445007] usb 2-2: new high-speed USB device number 12 using ehci-omap
[ 835.787628] usb 2-2: New USB device found, idVendor=13b1, idProduct=0020
[ 835.787658] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 835.787658] usb 2-2: Product: Compact Wireless-G USB Adapter
[ 835.787689] usb 2-2: Manufacturer: Cisco-Linksys
[ 835.921844] usb 2-2: reset high-speed USB device number 12 using ehci-omap
[ 836.409210] ieee80211 phy9: Selected rate control algorithm 'pid'
[ 836.410095] Registered led device: rt73usb-phy9::radio
[ 836.410186] Registered led device: rt73usb-phy9::assoc
[ 836.410308] Registered led device: rt73usb-phy9::quality
[ 836.972290] rt73usb 2-2:1.0: firmware: requesting rt73.bin
[ 837.080230] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 841.133483] wlan0: authenticate with ec:55:f9:9c:08:3c (try 1)
[ 841.135925] wlan0: authenticated
[ 841.155609] wlan0: associate with ec:55:f9:9c:08:3c (try 1)
[ 841.159820] wlan0: RX AssocResp from ec:55:f9:9c:08:3c (capab=0x411 status=0 aid=6)
[ 841.159851] wlan0: associated
[ 841.171661] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 845.690307] usb 2-2: USB disconnect, device number 12
[ 845.698730] wlan0: deauthenticating from ec:55:f9:9c:08:3c by local choice (reason=3)
[ 845.701782] cfg80211: Calling CRDA to update world regulatory domain
[ 846.005004] usb 2-2: new high-speed USB device number 13 using ehci-omap
[ 846.347534] usb 2-2: New USB device found, idVendor=13b1, idProduct=0020
[ 846.347564] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 846.347595] usb 2-2: Product: Compact Wireless-G USB Adapter
[ 846.347595] usb 2-2: Manufacturer: Cisco-Linksys
[ 846.481750] usb 2-2: reset high-speed USB device number 13 using ehci-omap
[ 846.968933] ieee80211 phy10: Selected rate control algorithm 'pid'
[ 846.969818] Registered led device: rt73usb-phy10::radio
[ 846.969940] Registered led device: rt73usb-phy10::assoc
[ 846.970031] Registered led device: rt73usb-phy10::quality
[ 847.317047] rt73usb 2-2:1.0: firmware: requesting rt73.bin
[ 847.465148] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 850.546997] usb 2-2: USB disconnect, device number 13
[ 850.882354] usb 2-2: new high-speed USB device number 14 using ehci-omap
[ 851.224853] usb 2-2: New USB device found, idVendor=13b1, idProduct=0020
[ 851.224853] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 851.224884] usb 2-2: Product: Compact Wireless-G USB Adapter
[ 851.224884] usb 2-2: Manufacturer: Cisco-Linksys
[ 851.359252] usb 2-2: reset high-speed USB device number 14 using ehci-omap
[ 851.846466] ieee80211 phy11: Selected rate control algorithm 'pid'
[ 851.847351] Registered led device: rt73usb-phy11::radio
[ 851.847442] Registered led device: rt73usb-phy11::assoc
[ 851.847534] Registered led device: rt73usb-phy11::quality
[ 852.633911] rt73usb 2-2:1.0: firmware: requesting rt73.bin
[ 852.733520] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 852.858123] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 853.669097] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 861.229400] wlan0: authenticate with ec:55:f9:9c:08:3c (try 1)
[ 861.240661] wlan0: authenticated
[ 861.273040] wlan0: associate with ec:55:f9:9c:08:3c (try 1)
[ 861.277099] wlan0: RX AssocResp from ec:55:f9:9c:08:3c (capab=0x411 status=0 aid=6)
[ 861.277099] wlan0: associated
[ 861.295166] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 863.136993] usb 2-2: USB disconnect, device number 14
[ 863.144287] wlan0: deauthenticating from ec:55:f9:9c:08:3c by local choice (reason=3)
[ 863.144500] cfg80211: Calling CRDA to update world regulatory domain
[ 863.443359] usb 2-2: new high-speed USB device number 15 using ehci-omap
[ 863.733062] usb 2-2: New USB device found, idVendor=13b1, idProduct=0020
[ 863.733093] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 863.738128] usb 2-2: can't set config #1, error -71
[ 863.738525] usb 2-2: USB disconnect, device number 15
[ 864.092163] usb 2-2: new high-speed USB device number 16 using ehci-omap
[ 864.435211] usb 2-2: New USB device found, idVendor=13b1, idProduct=0020
[ 864.435241] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 864.435272] usb 2-2: Product: Compact Wireless-G USB Adapter
[ 864.435272] usb 2-2: Manufacturer: Cisco-Linksys
[ 864.569580] usb 2-2: reset high-speed USB device number 16 using ehci-omap
[ 865.056213] ieee80211 phy12: Selected rate control algorithm 'pid'
[ 865.057067] Registered led device: rt73usb-phy12::radio
[ 865.057189] Registered led device: rt73usb-phy12::assoc
[ 865.057281] Registered led device: rt73usb-phy12::quality
[ 865.816894] rt73usb 2-2:1.0: firmware: requesting rt73.bin
[ 865.977447] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 869.157684] wlan0: authenticate with ec:55:f9:9c:08:3c (try 1)
[ 869.161224] wlan0: authenticated
[ 869.194274] wlan0: associate with ec:55:f9:9c:08:3c (try 1)
[ 869.197235] wlan0: RX AssocResp from ec:55:f9:9c:08:3c (capab=0x411 status=0 aid=6)
[ 869.197235] wlan0: associated
[ 869.215118] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 871.105499] usb 2-2: USB disconnect, device number 16
[ 871.131774] wlan0: deauthenticating from ec:55:f9:9c:08:3c by local choice (reason=3)
[ 871.132812] cfg80211: Calling CRDA to update world regulatory domain
[ 872.526031] usb 2-2: new high-speed USB device number 17 using ehci-omap
[ 872.868438] usb 2-2: New USB device found, idVendor=13b1, idProduct=0020
[ 872.868438] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 872.868469] usb 2-2: Product: Compact Wireless-G USB Adapter
[ 872.868469] usb 2-2: Manufacturer: Cisco-Linksys
[ 873.002807] usb 2-2: reset high-speed USB device number 17 using ehci-omap
[ 873.492034] ieee80211 phy13: Selected rate control algorithm 'pid'
[ 873.492889] Registered led device: rt73usb-phy13::radio
[ 873.493011] Registered led device: rt73usb-phy13::assoc
[ 873.493103] Registered led device: rt73usb-phy13::quality
[ 873.724365] usb 2-2: USB disconnect, device number 17
[ 874.089294] usb 2-2: new high-speed USB device number 18 using ehci-omap
[ 874.159820] hub 2-0:1.0: unable to enumerate USB device on port 2
[ 957.278289] usb 2-2: new high-speed USB device number 19 using ehci-omap
[ 957.622039] usb 2-2: New USB device found, idVendor=13b1, idProduct=0020
[ 957.622039] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 957.622070] usb 2-2: Product: Compact Wireless-G USB Adapter
[ 957.622070] usb 2-2: Manufacturer: Cisco-Linksys
[ 957.754882] usb 2-2: reset high-speed USB device number 19 using ehci-omap
[ 957.825256] phy14 -> rt2x00usb_vendor_request: Error - Vendor Request 0x09 failed for offset 0x0000 with error -19.
[ 957.825500] phy14 -> rt73usb_init_eeprom: Error - Invalid RT chipset detected.
[ 957.825683] phy14 -> rt2x00lib_probe_dev: Error - Failed to allocate device.
[ 957.826232] usb 2-2: USB disconnect, device number 19
[ 958.223663] usb 2-2: new high-speed USB device number 20 using ehci-omap
[ 958.301757] hub 2-0:1.0: unable to enumerate USB device on port 2
[ 1031.668945] usb 2-2: new high-speed USB device number 21 using ehci-omap
[ 1032.012634] usb 2-2: New USB device found, idVendor=13b1, idProduct=0020
[ 1032.012634] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1032.012664] usb 2-2: Product: Compact Wireless-G USB Adapter
[ 1032.012664] usb 2-2: Manufacturer: Cisco-Linksys
[ 1032.145507] usb 2-2: reset high-speed USB device number 21 using ehci-omap
[ 1032.637542] ieee80211 phy15: Selected rate control algorithm 'pid'
[ 1032.642395] Registered led device: rt73usb-phy15::radio
[ 1032.642700] Registered led device: rt73usb-phy15::assoc
[ 1032.642944] Registered led device: rt73usb-phy15::quality
[ 1032.938598] rt73usb 2-2:1.0: firmware: requesting rt73.bin
[ 1033.069732] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 1035.920928] wlan0: authenticate with ec:55:f9:9c:08:3c (try 1)
[ 1035.924224] wlan0: authenticated
[ 1035.952545] wlan0: associate with ec:55:f9:9c:08:3c (try 1)
[ 1035.956237] wlan0: RX AssocResp from ec:55:f9:9c:08:3c (capab=0x411 status=0 aid=6)
[ 1035.956237] wlan0: associated
[ 1035.972961] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 1039.644378] usb 2-2: USB disconnect, device number 21
[ 1039.651397] wlan0: deauthenticating from ec:55:f9:9c:08:3c by local choice (reason=3)
[ 1039.655578] cfg80211: Calling CRDA to update world regulatory domain
[ 1067.090850] usb 2-2: new high-speed USB device number 22 using ehci-omap
[ 1067.276672] usb 2-2: device descriptor read/all, error -71
[ 1067.395477] usb 2-2: new high-speed USB device number 23 using ehci-omap
[ 1067.473724] hub 2-0:1.0: unable to enumerate USB device on port 2
[ 1115.333038] usb 2-2: new high-speed USB device number 24 using ehci-omap
[ 1115.676666] usb 2-2: New USB device found, idVendor=13b1, idProduct=0020
[ 1115.676666] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1115.676696] usb 2-2: Product: Compact Wireless-G USB Adapter
[ 1115.676696] usb 2-2: Manufacturer: Cisco-Linksys
[ 1115.809570] usb 2-2: reset high-speed USB device number 24 using ehci-omap
[ 1116.298431] ieee80211 phy16: Selected rate control algorithm 'pid'
[ 1116.300292] Registered led device: rt73usb-phy16::radio
[ 1116.300567] Registered led device: rt73usb-phy16::assoc
[ 1116.300811] Registered led device: rt73usb-phy16::quality
[ 1116.550842] rt73usb 2-2:1.0: firmware: requesting rt73.bin
[ 1116.680969] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 1117.144989] usb 2-2: USB disconnect, device number 24
[ 1117.145355] phy16 -> rt2x00usb_vendor_request: Error - Vendor Request 0x06 failed for offset 0x3040 with error -19.
[ 1117.613952] usb 2-2: new high-speed USB device number 25 using ehci-omap
[ 1117.956207] usb 2-2: New USB device found, idVendor=13b1, idProduct=0020
[ 1117.956237] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1117.956237] usb 2-2: Product: Compact Wireless-G USB Adapter
[ 1117.956268] usb 2-2: Manufacturer: Cisco-Linksys
[ 1118.090606] usb 2-2: reset high-speed USB device number 25 using ehci-omap
[ 1118.577575] ieee80211 phy17: Selected rate control algorithm 'pid'
[ 1118.579589] Registered led device: rt73usb-phy17::radio
[ 1118.579864] Registered led device: rt73usb-phy17::assoc
[ 1118.580108] Registered led device: rt73usb-phy17::quality
[ 1118.856048] rt73usb 2-2:1.0: firmware: requesting rt73.bin
[ 1118.987792] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 1119.416625] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 1119.679290] usb 2-2: USB disconnect, device number 25
[ 1612.536132] usb 2-2: new high-speed USB device number 26 using ehci-omap
[ 1612.879974] usb 2-2: New USB device found, idVendor=13b1, idProduct=0020
[ 1612.879974] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1612.880004] usb 2-2: Product: Compact Wireless-G USB Adapter
[ 1612.880004] usb 2-2: Manufacturer: Cisco-Linksys
[ 1613.012695] usb 2-2: reset high-speed USB device number 26 using ehci-omap
[ 1613.501464] ieee80211 phy18: Selected rate control algorithm 'pid'
[ 1613.503234] Registered led device: rt73usb-phy18::radio
[ 1613.503509] Registered led device: rt73usb-phy18::assoc
[ 1613.503723] Registered led device: rt73usb-phy18::quality
[ 1613.751647] rt73usb 2-2:1.0: firmware: requesting rt73.bin
[ 1613.889129] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 1616.729888] wlan0: authenticate with ec:55:f9:9c:08:3c (try 1)
[ 1616.734313] wlan0: authenticated
[ 1616.768127] wlan0: associate with ec:55:f9:9c:08:3c (try 1)
[ 1616.795806] wlan0: RX AssocResp from ec:55:f9:9c:08:3c (capab=0x411 status=0 aid=6)
[ 1616.795837] wlan0: associated
[ 1616.813781] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 1627.629730] wlan0: no IPv6 routers present

If there is anything else I can do to find the cause let me know.

 

[notaz]

Try this newer driver, copy *.ko files to /lib/modules/3.2.63/kernel/drivers/net/wireless/rt2x00/ , run "sudo depmod" and then reboot.

If that doesn't help, I can't offer you much since even newer drivers depend on newer kernels. Unless you can point me to fix patch or some standalone driver.

rt2x00.zip

 

[b_o_b]

Thanks Notaz, unfortunately no improvement. This is the model (seems there are 3 versions - I have version 1):

https://sites.google.com/site/linksysupdateddrivers/rt73/hardware/wusb54gc-v1. It is a pretty old model - and huge -  maybe it is time to move on.

So no problem, I will just look for a new WIFI dongle then. Any advise on buying one? I want a small dongle that has a stable reception and of course is working on the Pandora. Should be widely available (to avoid having the dongle being unsupported in a few year). 

I have seen comments on this board that this dongle http://tweakers.net/pricewatch/316639/tp-link-tl-wn725n.html

TP-Link TL-WN725N is supported  - pretty cheap as well, nice and small. Seems to be available from a lot of shops.  I think I will buy this one unless someone advises otherwise.

 

[b_o_b]

Bought 2 TP-Link TL-WN725N dongles for 16 Euro incl. shipment. Just plugged them in and they seem to work fine without any customization. Nice