I did a bit of digging through my dust-collectors and found my old classic pandora. I remembered vaguely, there was a battery problem, which I didn't solved.
As I was fiddeling around a bit, I located the problem: the contacts of the case and battery are miss-aligned (orange line, it's a bit hard to see in the pic, but when I remove the cover an push the battery (left in the pic, to the front in the pandora) it boots!
So the question is how do I fix that properly? I guess the position of the board is fixed, so I was asking myself: are the soft pads on the sides originally?
(can't remember, if I put those or if I got that pandpra used..)
Anyways, if I push the batter against the green circled pad (squeezing it a bit) are aligning.
My ideas:
a) remove that pad and maybe double it othe other side
b) glue the battery into the lid in the right positioin
Sidequest: is there a way to fit the pyra battery into the pandora? (and has the pandora the tech specification to fully charge the 50% bigger v´battery?)
Had some time to dig bit in. Maybe (sadly) notaz is righ. I noticed that the remaning Battery power didn't changed (77% without changing). So while running I unplugged the powercord, which instandly switched the pandora of. I used the battery from my other pandora to verify but wuth that one it isn't running either.
So something with the powersupply/managment defnitly seems wrong.
I have a multimeter and a magnifier lamp ad hand. Anthing further I could investigate with that or should someone more skilled with it should look into it (if a classic board is worth that anyway..)
So something with the powersupply/managment defnitly seems wrong.
I have a multimeter and a magnifier lamp ad hand. Anthing further I could investigate with that or should someone more skilled with it should look into it (if a classic board is worth that anyway..)
As I was fiddeling around a bit, I located the problem: the contacts of the case and battery are miss-aligned (orange line, it's a bit hard to see in the pic, but when I remove the cover an push the battery (left in the pic, to the front in the pandora) it boots!
So the question is how do I fix that properly? I guess the position of the board is fixed, so I was asking myself: are the soft pads on the sides originally?
(can't remember, if I put those or if I got that pandpra used..)
Anyways, if I push the batter against the green circled pad (squeezing it a bit) are aligning.
My ideas:
a) remove that pad and maybe double it othe other side
b) glue the battery into the lid in the right positioin
Sidequest: is there a way to fit the pyra battery into the pandora? (and has the pandora the tech specification to fully charge the 50% bigger v´battery?)
