dewc
Member
- Joined
- Sep 3, 2007
- Messages
- 103
I have a microsd card with an adapter originally designed for SD cards. I've used this in the past on my OpenPandora unit without issues. Today, after I flashed it with the lastest HF5, I noticed that this particular card / setup mounts twice.
So on my screen I see two icons, one for SD/MMC drive, one for the label of the card. I need to unmount the SD/MMC drive one before I can actually see the contents of the second properly mounted one. My other card is an SDHC card as well, but full sized. I tried swapping SD slots with the same results.
Minor edit, it's the same card I used for updating the firmware, so it's not really a problem... just a weird quirk.
Any ideas?
Part of the dmesg that may help...
[ 14.481842] mmc0: host does not support reading read-only switch. assuming write-enable.
[ 14.490051] mmc0: new high speed SDHC card at address 1234
[ 14.496032] mmcblk0: mmc0:1234 SA08G 7766016KiB
[ 14.500976] mmcblk0: p1
[ 14.885772] mmc1: host does not support reading read-only switch. assuming write-enable.
[ 14.894012] mmc1: new high speed SDHC card at address 1234
[ 14.900085] mmcblk1: mmc1:1234 SA08G 7774208KiB
[ 14.905059] mmcblk1: p1
[ 21.344421] ads7846 spi1.0: touchscreen, irq 254
[ 21.349792] input: touchscreen as /devices/platform/omap2_mcspi.1/spi1.0/input/input5
[ 26.195037] FAT: bogus number of reserved sectors
[ 26.199829] VFS: Can't find a valid FAT filesystem on dev mmcblk0.
[ 26.618347] FAT: bogus number of reserved sectors
[ 26.623168] VFS: Can't find a valid FAT filesystem on dev mmcblk0.
[ 27.538970] NET: Registered protocol family 10
[ 27.710845] UBIFS: recovery needed
[ 27.783233] UBIFS: recovery completed
[ 27.787017] UBIFS: mounted UBI device 1, volume 0, name "boot"
[ 27.792877] UBIFS: file system size: 8386560 bytes (8190 KiB, 7 MiB, 65 LEBs)
[ 27.800262] UBIFS: journal size: 1032193 bytes (1008 KiB, 0 MiB, 6 LEBs)
[ 27.807525] UBIFS: media format: w4/r0 (latest is w4/r0)
[ 27.813415] UBIFS: default compressor: lzo
[ 27.817535] UBIFS: reserved for root: 396117 bytes (386 KiB)
[ 28.544799] input: nub0 as /devices/platform/i2c_omap.3/i2c-adapter/i2c-3/3-0066/input/input6
[ 28.787048] input: nub1 as /devices/platform/i2c_omap.3/i2c-adapter/i2c-3/3-0067/input/input7
[ 96.739685] mmc1: card 1234 removed
[ 255.466094] mmc1: host does not support reading read-only switch. assuming write-enable.
[ 255.474273] mmc1: new SD card at address 6a12
[ 255.479217] mmcblk1: mmc1:6a12 S032B 30400KiB
[ 255.484008] mmcblk1: p1
[ 256.049530] FAT: bogus number of reserved sectors
[ 256.054321] VFS: Can't find a valid FAT filesystem on dev mmcblk1.
[ 256.229858] FAT: bogus number of reserved sectors
[ 256.234649] VFS: Can't find a valid FAT filesystem on dev mmcblk1.
[ 268.341094] mmc1: card 6a12 removed
[ 294.130157] mmc0: card 1234 removed
[ 298.130249] mmc1: host does not support reading read-only switch. assuming write-enable.
[ 298.138458] mmc1: new high speed SDHC card at address 1234
[ 298.144470] mmcblk0: mmc1:1234 SA08G 7766016KiB
[ 298.149475] mmcblk0: p1
[ 298.780456] FAT: bogus number of reserved sectors
[ 298.785217] VFS: Can't find a valid FAT filesystem on dev mmcblk0.
[ 299.020843] FAT: bogus number of reserved sectors
[ 299.025604] VFS: Can't find a valid FAT filesystem on dev mmcblk0.
[ 315.309783] mmc0: error -110 whilst initialising SD card
[ 343.669372] mmc0: host does not support reading read-only switch. assuming write-enable.
[ 343.677581] mmc0: new high speed SDHC card at address 1234
[ 343.683593] mmcblk1: mmc0:1234 SA08G 7774208KiB
[ 343.688568] mmcblk1: p1
So on my screen I see two icons, one for SD/MMC drive, one for the label of the card. I need to unmount the SD/MMC drive one before I can actually see the contents of the second properly mounted one. My other card is an SDHC card as well, but full sized. I tried swapping SD slots with the same results.
Minor edit, it's the same card I used for updating the firmware, so it's not really a problem... just a weird quirk.
Any ideas?
Part of the dmesg that may help...
[ 14.481842] mmc0: host does not support reading read-only switch. assuming write-enable.
[ 14.490051] mmc0: new high speed SDHC card at address 1234
[ 14.496032] mmcblk0: mmc0:1234 SA08G 7766016KiB
[ 14.500976] mmcblk0: p1
[ 14.885772] mmc1: host does not support reading read-only switch. assuming write-enable.
[ 14.894012] mmc1: new high speed SDHC card at address 1234
[ 14.900085] mmcblk1: mmc1:1234 SA08G 7774208KiB
[ 14.905059] mmcblk1: p1
[ 21.344421] ads7846 spi1.0: touchscreen, irq 254
[ 21.349792] input: touchscreen as /devices/platform/omap2_mcspi.1/spi1.0/input/input5
[ 26.195037] FAT: bogus number of reserved sectors
[ 26.199829] VFS: Can't find a valid FAT filesystem on dev mmcblk0.
[ 26.618347] FAT: bogus number of reserved sectors
[ 26.623168] VFS: Can't find a valid FAT filesystem on dev mmcblk0.
[ 27.538970] NET: Registered protocol family 10
[ 27.710845] UBIFS: recovery needed
[ 27.783233] UBIFS: recovery completed
[ 27.787017] UBIFS: mounted UBI device 1, volume 0, name "boot"
[ 27.792877] UBIFS: file system size: 8386560 bytes (8190 KiB, 7 MiB, 65 LEBs)
[ 27.800262] UBIFS: journal size: 1032193 bytes (1008 KiB, 0 MiB, 6 LEBs)
[ 27.807525] UBIFS: media format: w4/r0 (latest is w4/r0)
[ 27.813415] UBIFS: default compressor: lzo
[ 27.817535] UBIFS: reserved for root: 396117 bytes (386 KiB)
[ 28.544799] input: nub0 as /devices/platform/i2c_omap.3/i2c-adapter/i2c-3/3-0066/input/input6
[ 28.787048] input: nub1 as /devices/platform/i2c_omap.3/i2c-adapter/i2c-3/3-0067/input/input7
[ 96.739685] mmc1: card 1234 removed
[ 255.466094] mmc1: host does not support reading read-only switch. assuming write-enable.
[ 255.474273] mmc1: new SD card at address 6a12
[ 255.479217] mmcblk1: mmc1:6a12 S032B 30400KiB
[ 255.484008] mmcblk1: p1
[ 256.049530] FAT: bogus number of reserved sectors
[ 256.054321] VFS: Can't find a valid FAT filesystem on dev mmcblk1.
[ 256.229858] FAT: bogus number of reserved sectors
[ 256.234649] VFS: Can't find a valid FAT filesystem on dev mmcblk1.
[ 268.341094] mmc1: card 6a12 removed
[ 294.130157] mmc0: card 1234 removed
[ 298.130249] mmc1: host does not support reading read-only switch. assuming write-enable.
[ 298.138458] mmc1: new high speed SDHC card at address 1234
[ 298.144470] mmcblk0: mmc1:1234 SA08G 7766016KiB
[ 298.149475] mmcblk0: p1
[ 298.780456] FAT: bogus number of reserved sectors
[ 298.785217] VFS: Can't find a valid FAT filesystem on dev mmcblk0.
[ 299.020843] FAT: bogus number of reserved sectors
[ 299.025604] VFS: Can't find a valid FAT filesystem on dev mmcblk0.
[ 315.309783] mmc0: error -110 whilst initialising SD card
[ 343.669372] mmc0: host does not support reading read-only switch. assuming write-enable.
[ 343.677581] mmc0: new high speed SDHC card at address 1234
[ 343.683593] mmcblk1: mmc0:1234 SA08G 7774208KiB
[ 343.688568] mmcblk1: p1
Last edited by a moderator: