Hardware Repair

[Disposable1978]

I have an openpandora :: 1Ghz edition.

What kind of options do I have for a repair?

The right shoulder button is the problem. There is no triggering mechanism on the board. ( purchased used ) The screws have been beat on ( partially my fault ) which inhibits easy acces to it's board.

In " what kind of " options " " what I specifically meant = could the fix be a service available?

 

[TeDaDeS]

The screws you could fix yourself, by replacing them. There are enough tips to get broken screws out.

The triggers might be fixed if you are creative, but maybe ED offers repairs. From feedback I've seen on the forums this service can be very slow, so might not be recommended.

Getting a broken or a 2nd hand Pandora might be quicker way to get stuff working: https://pyra-handheld.com/boards/threads/pandora-rebirth-edition-for-sale.100062/
The 1GHz version board should fit in the other shells, including screws, if there are more issues. If you are handy with a soldering iron you can transplant a switch to.
Probably the fastest but most expensive option.

 

[Disposable1978]

Good info.
Thank you for that

 

[Legodude522]

Is the trigger hardware missing? I've had to repair one of my triggers, it broke off the solder pad. I resoldered it and all was good.

 

[Disposable1978]

There is seemingly remnants of the trigger. . Possibly all of it. I'm just shy to think too far ahead seeing as how I can't access the board b u t. Question : are the triggers modeled after another system? If I needed a fresh one that would make it easier. How many prongs was it to solder down?

 

[TeDaDeS]

This is a picture of the PCB. I guess your 'tactile push button' (labeled SW9) might be broken, as seen in the top right. I don't know the part number, does anyone know if there is a complete parts list for the Pandora?

There have been issues in the past where the casing was to tight and just loosening the screw would fix the trigger from not working.
If the screw is stripped there are tricks that might work, like adding a rubber band on top of the screw driver or to use some glue, but I've not tried those myself so I don't know which works best in your situation.

 

[rSl]

complete parts list for the Pandora?

Pandora PCB (Open Files)

All files within this ZIP archive are owned by MJW Designs (Michael Weston). They are free to use for non-commercial use. If you plan to modify them and redistribute them, always keep this license and a link to www.openpandora.org in the...

pyra-handheld.com

 

[TeDaDeS]

The part number is labeled as: KT11P2SA3M3
I think that is missing a number at the end to indicate the specific model. The is a note: "Momentary switches, right angle, SMT, 300g (looking for alternate with lower force, eg. 100-150g)".

I don't think this is the exact one, but who knows: https://www.digikey.com/en/products/detail/c-k/KT11P2SA3M35LFG/1012174

 

[Risca]

According to the datasheet from Digikey, the part numbers mean this:
KT11 - this line of switches
P2 - hard actuator, 2.36 mm travel
SA3M - Right angle with pick & place tab
3 - 3 (?)
5 - gold plated
LFG - RoHS compliant and compatible. Gold plated

So it looks like it is compatible

 

[Disposable1978]

If I may, despite the fact this sentiment will be arriving belated, the sentiment remains the same. Thank you. Thank you.
Everybody for the help on this issue.My woes are many when I can get a grip on them.I may be back for more help