Case: Difference between revisions - Pyra Wiki

(Added info on final, mention about case coating, add header for TCO to be on top, misc cleanup)
Line 10: Line 10:
== Production colors ==
== Production colors ==


* Current production color are '''Black''' ([https://www.dragonbox.de/en/handhelds/pyra/pyra-handheld-black-4g-eu-edition shop]) and '''Dark Chrome''' ([https://www.dragonbox.de/en/handhelds/pyra/pyra-handheld-dark-chrome-4g-eu-edition shop])
* Current production color are '''Black''' and '''Dark Chrome'''


<gallery widths=250px>
<gallery widths=250px>

Revision as of 14:38, 2 June 2021

General case info

  • Dimensions 140 x 84 x 29 mm
  • Poly-carbonate (PC) plastic (very strong)
  • Molds are made for PC, so PC pellets are needed
  • Color is be mixed into the plastic itself
  • Cases are then coated to provide final color and better finish

Production colors

  • Current production color are Black and Dark Chrome

Prototype colors

  • Prototype Colors [1]
  • At that stage it was decided that one color will be definitely Black [2].
  • All RAL Classic Colors should be easily available[3].

Blender file

  • The Blender file of the case can be used to make mods or renders of the real thing.

Injection Molded Plastic

  • The default injection molded case is produced by Form Action in Greece.
  • Based on the Pandora case with fixes to, among other things, battery compartment width.

Coating

  • It was decided to coat (paint) the case to provide a better finish Ref
  • Without this, case show reflection and minor defect

Development cases

  • Early Cases where 3D Printed.
  • First (Injection Molded Plastic) prototype Cases needed a lot of Fixes (such as Fixing the Gap at the Front).
Back
Top