Wolf3sdl 1.7svn


Pickle

Mega GP Mania
Joined
May 30, 2006
Messages
5,518
Location
Detroit, Michigan
Website
Visit site
CODE
http://archive.gp2x.de/cgi-bin/cfiles.cgi?0,0,0,0,20,2479
(when the archive is updated)

Main changes are:
Offloading the fmopl to the 940. This allows Wolf4SDL to run below 200 Mhz.
Double buffering/VSYNC (althgough theres a catch to this, the status bar does update properly in this mode at the moment. use the parameter --nodblbuf to turn is off.
Many other bugfixes look at the changes.txt for more.

Have fun.
 
cloudy-cola-corp said:
Great! It'd be good to play wolf3d again, I'll look in the attic. Looks like it's also good for saving battery life too!
maybe a little bit, more if the 940 runs all the time but I dont think it does. I hope its your wolf files and not your gp2x in the attic :rolleyes:
 
Last edited by a moderator:
bman posted on May 15 2009 at 04:08 PM) SOD (full said:
gets OPL/segfault when starting. WL6 works great.

This is on GP2X F200 4.0.0.
can you try after deleting the sod config file? Its very odd one is working and the other doesnt.
 
Last edited by a moderator:
Pickle posted on May 15 2009 at 04:34 PM) [quote="bman posted on May 15 2009 at 04:08 PM said:
SOD (full"] gets OPL/segfault when starting. WL6 works great.
This is on GP2X F200 4.0.0.[/quote]can you try after deleting the sod config file? Its very odd one is working and the other doesnt.

It never writes a config. Crashes on startup. Have SOD and WL6 in different dirs.
 
Last edited by a moderator:
bman posted on May 15 2009 at 10:10 PM) [quote="Pickle posted on May 15 2009 at 04:34 PM said:
bman posted on May 15 2009 at 04:08 PM said:
SOD (full"] gets OPL/segfault when starting. WL6 works great.
This is on GP2X F200 4.0.0.
can you try after deleting the sod config file? Its very odd one is working and the other doesnt.

It never writes a config. Crashes on startup. Have SOD and WL6 in different dirs.[/quote]can you put up a list of the files you have in the sod directory?
 
Last edited by a moderator:
Both WL6 and SOD (full) work in mine.

(Had to disable joystick and double buffering to make them work properly. :p )

How can you tell if the 940 is working?
 
Manjuu posted on May 16 2009 at 04:08 AM) Both WL6 and SOD (full) work in mine. (Had to disable joystick and double buffering to make them work properly. :P said:
How can you tell if the 940 is working?
You can see some output over the console, mainly it allows for a lower clock
 
Last edited by a moderator:
Pickle posted on May 15 2009 at 09:48 PM said:
can you put up a list of the files you have in the sod directory?
Directory of E:\game\interpreters\sod

05/15/2009 12:37 PM <DIR> .
05/15/2009 12:37 PM <DIR> ..
01/05/1993 01:40 AM 1,072 AUDIOHED.SOD
01/05/1993 01:40 AM 328,620 AUDIOT.SOD
01/05/1993 01:40 AM 68,290 GAMEMAPS.SOD
01/05/1993 01:40 AM 402 MAPHEAD.SOD
01/05/1993 01:40 AM 1,024 VGADICT.SOD
01/05/1993 01:40 AM 947,979 VGAGRAPH.SOD
01/05/1993 01:40 AM 510 VGAHEAD.SOD
04/13/2009 12:51 PM 1,933,874 Wolf4SDL_SOD.gpe
04/13/2009 10:22 AM 7,684 code940.bin
04/13/2009 11:49 AM 1,676 mmuhack.o
04/13/2009 09:00 AM 8,854 README.txt
04/13/2009 11:57 AM 2,782 README-GP2X.txt
12 File(s) 3,302,767 bytes

When I use Termula I get the following results:
OPL2 ...
Segmentation Fault

Had to disable joystick in WL6 as well. Don't see double buffer option in README but in --help.
--nodblbuf --joystick -1 not working for SOD.
 
Last edited by a moderator:
Pickle posted on May 16 2009 at 10:08 AM said:
Your missing 1616544 1993-01-04 20:40 vswap.sod
are you expecting to be running a demo version and the full version?
That's what I get for extracting only disk 1. Thanks. What an oversight.
 
Last edited by a moderator:
bman posted on May 16 2009 at 10:47 PM said:
Pickle posted on May 16 2009 at 10:08 AM said:
Your missing 1616544 1993-01-04 20:40 vswap.sod
are you expecting to be running a demo version and the full version?
That's what I get for extracting only disk 1. Thanks. What an oversight.
well im glad it was something simple like that, post again if it works now :)
 
Last edited by a moderator:
Pickle posted on May 17 2009 at 07:34 AM said:
bman posted on May 16 2009 at 10:47 PM said:
Pickle posted on May 16 2009 at 10:08 AM said:
Your missing 1616544 1993-01-04 20:40 vswap.sod
are you expecting to be running a demo version and the full version?
That's what I get for extracting only disk 1. Thanks. What an oversight.
well im glad it was something simple like that, post again if it works now :)

umhh,yes,rookie mistake; works great now
 
Last edited by a moderator:
Back
Top