Mofokubik
Newbie
Is there a way you can set up your gp32 so it can read stuff directly off of your harddrive without using smc space...like put a program on your smc that can read thru the usb port to your computer?
Unlimited space
- Thread starter Mofokubik
- Start date
divadsci
ahah i'm customised!
or just a hard disk. think about 60 gb of space!!
Rigor Mortis
Member
- Joined
- May 21, 2003
- Messages
- 174
Ah, but what if you could connect the GP32 to a portable USB PC Hard Drive?
Intruder
Member
It could be theorically possible, this is call NETWORK ;-). If we can get some form of networking via the GP32 then it will surely be possible to write some kind of device/driver that will let you map your harddrive. But this would probably require some other software running on your PC.
Maybe they are some networking solution done using USB cable that we could check? Remind me of the parallel i use in the past to build cheap network for 2 computer.
Maybe they are some networking solution done using USB cable that we could check? Remind me of the parallel i use in the past to build cheap network for 2 computer.
VirtuaLeech
Active Member
- Joined
- Apr 16, 2003
- Messages
- 571
How about finding some way to get a RF module connected (and working ofcourse) to your PC. That way you would have a wireless connection with your PC from your GP32.
With the proper software you could be reading webpages from your toilet <_<
With the proper software you could be reading webpages from your toilet <_<
Degenerate
Still Fresh
Christ, if I knew it'd be as simple as that, I would have gotten my 3 year old cousin to mod it weeks ago! Damn Shrike, that's pure child's play!Shrike posted on May 24 2003 said:
Last edited by a moderator:
Mofokubik
Newbie
Can your 3 year old cousin write nicer posts than you?
Perhaps its possible to... so think about it:
you have to have 2 RF Links
1 in your GP32 and another one, which is modified, in your PC (serial or USB)
You would have a cable less connection to your pc.
Then we need a driver... network could be also possible.
The Program and driver on PC would convert the RF signals in some tcpip stuff or you without network in something other
On the gp32 you have a special File Manager which could enter the Computer. and Start every kind of software on it.
But i dont know how fast the rf link for gp32 is... so perhaps its not very usable.
Then we should work on a USB Network... wasnt there something like that? Connect to PC through USB....
Hmm think about it
BYE
you have to have 2 RF Links
1 in your GP32 and another one, which is modified, in your PC (serial or USB)
You would have a cable less connection to your pc.
Then we need a driver... network could be also possible.
The Program and driver on PC would convert the RF signals in some tcpip stuff or you without network in something other
On the gp32 you have a special File Manager which could enter the Computer. and Start every kind of software on it.
But i dont know how fast the rf link for gp32 is... so perhaps its not very usable.
Then we should work on a USB Network... wasnt there something like that? Connect to PC through USB....
Hmm think about it
BYE
rcx21000
Well-Known Member
What about a 802.11b (or a or g, but they would prolly be harder) network? It shouldn't be too hard to mod a adapter, and there might already be one (GP's ext is the same as cell phone's). But the software would be pretty hard
