tangoGPS aus dem anstrom repo


zapman

zapman

Member
Joined
Jul 23, 2009
Messages
324
Age
46
Location
EU
hallo!
ich habe es tatsachlich (trotz linux-anfaenger) geschafft tangogps (http://www.angstrom-distribution.org/repo/?pkgname=tangogps) auf meiner pandora zu installieren :)

show.php
http://www.pasteall.org/pic/show.php?id=3818

ich sag mal wie ichs gemacht habe, anderen Neulingen bringts vllt was und andere können sagen was ich dumm/ falsch/ ineffizient gemacht habe:

"sudo opkg update"
"sudo opkg install <url des ipk packages auf angström repository seite>"

habe so schritt für schritt alle packages installiert, die für tangoGPS nötig sind (ca. 5 Stück, die der standard Pandora fehlen), dann schließlich tangoGPS selber. An einer Stelle hat der installer gemeckert, dass es einen Konflikt mit bereits installierten Dateien gibt, ich habe deshalb ein Überschrieben erzwungen:

"sudo opkg --force-overwrite install <url des ipk packages auf angström repository seite>"

Nicht gut, ich weiß, aber ich wusste mir sonst nicht zu helfen und will wissen ob tangoGPS funktioniert.


Nach der Installation habe ich im Startmenü den Eintrag "Other/GPS & Map" mit dem ich tangoGPS starten kann. Wenn WLAN an ist, läd er sich schon von alleine Mapdaten von openStreetmap herunter und man kann auf der Karte zumfahren und zoomen wie z.B. bei google maps, yay!


So weit so gut, nun komm ich leider nicht mehr weiter, denn tangoGPS soll ja die eigene Position von einer GPS-Maus bekommen (NaviLock NL-302U mit SiRF Star III Chip). Dazu ist das Programm "gpsd" nötig, das ich oben als eine von mehreren Abhängigkeiten von tangoGPS installiert habe. Es kommuniziert mit der USB-GPS-Maus und sollte die Koordinaten etc bereitstellen. Und hier hakt es: ich bekomme keine Daten von gpsd.
Eigentlich sollte das alles Automatisch laufen (USB-Device erkennen und Verbindung herstellen) aber das tut es irgendwie nicht. Hab es manuell versucht mit "gpsd ttys0", aber da findet er das GPS-Device nicht.

Lange Rede, kurze Frage:
wie kann ich herausfinden wie mein GPS-Empfänger heißt bzw welche Verbindung ich ansprechen muss? [Hab den GPS-Empfänger über einen USB2.0/1.1 Hub an der Pandora hängen, das GPS Device macht soweit ich weiß nur USB1.1 was der größere USB-Anschluss der Pandora nicht unterstützt]

Weiß jmd Rat? Danke jedenfalls schonmal an jeden, der es bis hierhier gelesen hat :)

Hier noch der Output von dmesg:
Code: 
<i>
</i>tusters_kasten:~$ dmesg       
:              512
[15237.543487] UBI: VID header offset:          512 (aligned 512)
[15237.549377] UBI: data offset:                2048
[15237.556274] UBI: background thread "ubi_bgt0d" started, PID 357
[15237.600067] UBI: attached mtd3 to ubi1
[15237.603912] UBI: MTD device name:            "boot"
[15237.608825] UBI: MTD device size:            10 MiB
[15237.613739] UBI: number of good PEBs:        80
[15237.618316] UBI: number of bad PEBs:         0
[15237.622802] UBI: max. allowed volumes:       128
[15237.627471] UBI: wear-leveling threshold:    4096
[15237.632202] UBI: number of internal volumes: 1
[15237.636688] UBI: number of user volumes:     1
[15237.641174] UBI: available PEBs:             0
[15237.645660] UBI: total number of reserved PEBs: 80
[15237.650482] UBI: number of PEBs reserved for bad PEB handling: 2
[15237.656524] UBI: max/mean erase counter: 2/1
[15237.660858] UBI: image sequence number: 588153386
[15237.665618] usbmon: debugfs is not available
[15237.670288] ehci-omap ehci-omap.0: OMAP-EHCI Host Controller
[15237.676177] UBI: background thread "ubi_bgt1d" started, PID 360
[15237.682464] ehci-omap ehci-omap.0: new USB bus registered, assigned bus number 1
[15237.690307] ehci-omap ehci-omap.0: irq 77, io mem 0x48064800
[15237.704559] ehci-omap ehci-omap.0: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[15237.712707] usb usb1: configuration #1 chosen from 1 choice
[15237.718658] hub 1-0:1.0: USB hub found
[15237.722564] hub 1-0:1.0: 3 ports detected
[15237.940155] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[15237.947052] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[15237.954315] usb usb1: Product: OMAP-EHCI Host Controller
[15237.959686] usb usb1: Manufacturer: Linux 2.6.27.46-omap1 ehci_hcd
[15237.965942] usb usb1: SerialNumber: ehci-omap.0
[15237.970825] Initializing USB Mass Storage driver...
[15238.095153] usb 1-2: new high speed USB device using ehci-omap and address 2
[15238.253509] usb 1-2: configuration #1 chosen from 1 choice
[15238.259613] hub 1-2:1.0: USB hub found
[15238.263793] hub 1-2:1.0: 4 ports detected
[15238.486816] usb 1-2: New USB device found, idVendor=05e3, idProduct=0608
[15238.493591] usb 1-2: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[15238.500793] usb 1-2: Product: USB2.0 Hub
[15238.587799] usb 1-2.3: new full speed USB device using ehci-omap and address 3
[15238.714263] usb 1-2.3: configuration #1 chosen from 1 choice
[15238.722229] usb 1-2.3: New USB device found, idVendor=067b, idProduct=2303
[15238.729187] usb 1-2.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[15238.736633] usb 1-2.3: Product: USB-Serial Controller
[15238.741729] usb 1-2.3: Manufacturer: Prolific Technology Inc.
[15238.747833] usbcore: registered new interface driver usb-storage
[15238.753936] USB Mass Storage support registered.
[15238.758880] usbcore: registered new interface driver libusual
[15238.765319] mice: PS/2 mouse device common for all mice
[15238.791473] input: gpio-keys as /devices/platform/gpio-keys/input/input1
[15238.877685] input: keypad as /devices/platform/i2c_omap.1/i2c-adapter/i2c-1/1-004a/twl4030_keypad/input/input2
[15238.941101] input: nub0 as /devices/platform/i2c_omap.3/i2c-adapter/i2c-3/3-0066/input/input3
[15239.002227] input: nub1 as /devices/platform/i2c_omap.3/i2c-adapter/i2c-3/3-0067/input/input4
[15239.065185] twl4030_rtc twl4030_rtc: rtc core: registered twl4030_rtc as rtc0
[15239.076293] bq27x00-battery 3-0055: support ver. 1.1.0 enabled
[15239.082550] Bluetooth: HCI UART driver ver 2.2
[15239.087036] Bluetooth: HCI H4 protocol initialized
[15239.091918] Bluetooth: HCILL protocol initialized
[15239.096740] hci_h4p hci_h4p: Registering HCI H4P device
[15239.252655] mmci-omap mmci-omap.0: Failed to get debounce clock
[15239.360900] mmci-omap mmci-omap.1: Failed to get debounce clock
[15239.361907] mmci-omap mmci-omap.2: Failed to get debounce clock
[15239.362762] Registered led device: pandora::sd1
[15239.367614] Registered led device: pandora::sd2
[15239.372497] Registered led device: pandora::bluetooth
[15239.377899] Registered led device: pandora::wifi
[15239.383361] Registered led device: pandora::keypad_bl
[15239.388854] Registered led device: pandora::power
[15239.394317] Registered led device: pandora::charger
[15239.399810] usbcore: registered new interface driver usbhid
[15239.405456] usbhid: v2.6:USB HID core driver
[15239.410095] Advanced Linux Sound Architecture Driver Version 1.0.17.
[15239.417297] usbcore: registered new interface driver snd-usb-audio
[15239.423583] ASoC version 0.13.2
[15239.427001] OMAP3 Pandora SoC init
[15239.430755] TWL4030 Audio Codec init 
[15239.436035] asoc: twl4030 <-> omap-mcbsp-dai-0 mapping ok
[15239.443176] asoc: twl4030 <-> omap-mcbsp-dai-1 mapping ok
[15239.457550] ALSA device list:
[15239.460540]   #0: omap3pandora (twl4030)
[15239.464843] TCP cubic registered
[15239.468109] NET: Registered protocol family 17
[15239.472656] NET: Registered protocol family 15
[15239.477142] Bluetooth: L2CAP ver 2.11
[15239.480865] Bluetooth: L2CAP socket layer initialized
[15239.485992] Bluetooth: SCO (Voice Link) ver 0.6
[15239.490539] Bluetooth: SCO socket layer initialized
[15239.495635] Bluetooth: RFCOMM socket layer initialized
[15239.500854] Bluetooth: RFCOMM TTY layer initialized
[15239.505798] Bluetooth: RFCOMM ver 1.10
[15239.509643] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[15239.514984] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
[15239.521514] RPC: Registered udp transport module.
[15239.526275] RPC: Registered tcp transport module.
[15239.531066] ThumbEE CPU extension supported.
[15239.535644] Disabling unused clock "sr2_fck"
[15239.535675] Disabling unused clock "sr1_fck"
[15239.535705] Disabling unused clock "mcbsp_fck"
[15239.535705] Disabling unused clock "mcbsp_fck"
[15239.535736] Disabling unused clock "mcbsp_fck"
[15239.535736] Disabling unused clock "mcbsp_ick"
[15239.535736] Disabling unused clock "mcbsp_ick"
[15239.535766] Disabling unused clock "mcbsp_ick"
[15239.535766] Disabling unused clock "gpt2_ick"
[15239.535797] Disabling unused clock "gpt3_ick"
[15239.535797] Disabling unused clock "gpt4_ick"
[15239.535827] Disabling unused clock "gpt5_ick"
[15239.535827] Disabling unused clock "gpt6_ick"
[15239.535858] Disabling unused clock "gpt7_ick"
[15239.535858] Disabling unused clock "gpt8_ick"
[15239.535858] Disabling unused clock "gpt9_ick"
[15239.535888] Disabling unused clock "wdt3_ick"
[15239.535888] Disabling unused clock "wdt3_fck"
[15239.535919] Disabling unused clock "gpio2_dbck"
[15239.535919] Disabling unused clock "gpio3_dbck"
[15239.535949] Disabling unused clock "gpio5_dbck"
[15239.535949] Disabling unused clock "gpt9_fck"
[15239.535980] Disabling unused clock "gpt8_fck"
[15239.535980] Disabling unused clock "gpt7_fck"
[15239.535980] Disabling unused clock "gpt6_fck"
[15239.536010] Disabling unused clock "gpt5_fck"
[15239.536010] Disabling unused clock "gpt4_fck"
[15239.536041] Disabling unused clock "gpt3_fck"
[15239.536041] Disabling unused clock "gpt2_fck"
[15239.536041] Disabling unused clock "gpt1_ick"
[15239.536071] Disabling unused clock "wdt1_ick"
[15239.536071] Disabling unused clock "wdt2_ick"
[15239.536102] Disabling unused clock "wdt2_fck"
[15239.536102] Disabling unused clock "gpio1_dbck"
[15239.536132] Disabling unused clock "gpt1_fck"
[15239.536132] Disabling unused clock "cam_ick"
[15239.536163] Disabling unused clock "cam_mclk"
[15239.536163] Disabling unused clock "des1_ick"
[15239.536193] Disabling unused clock "sha11_ick"
[15239.536193] Disabling unused clock "rng_ick"
[15239.536193] Disabling unused clock "aes1_ick"
[15239.536224] Disabling unused clock "ssi_ick"
[15239.536224] Disabling unused clock "mailboxes_ick"
[15239.536254] Disabling unused clock "mcbsp_ick"
[15239.536254] Disabling unused clock "mcbsp_ick"
[15239.536254] Disabling unused clock "gpt10_ick"
[15239.536285] Disabling unused clock "gpt11_ick"
[15239.536285] Disabling unused clock "uart2_ick"
[15239.536315] Disabling unused clock "i2c_ick"
[15239.536315] Disabling unused clock "hdq_ick"
[15239.536346] Disabling unused clock "mspro_ick"
[15239.536346] Disabling unused clock "des2_ick"
[15239.536376] Disabling unused clock "sha12_ick"
[15239.536376] Disabling unused clock "aes2_ick"
[15239.536376] Disabling unused clock "icr_ick"
[15239.536407] Disabling unused clock "pka_ick"
[15239.536407] Disabling unused clock "ssi_ssr_fck"
[15239.536437] Disabling unused clock "hdq_fck"
[15239.536437] Disabling unused clock "uart2_fck"
[15239.536468] Disabling unused clock "mcbsp_fck"
[15239.536468] Disabling unused clock "mcbsp_fck"
[15239.536499] Disabling unused clock "i2c_fck"
[15239.536499] Disabling unused clock "mspro_fck"
[15239.536529] Disabling unused clock "gpt11_fck"
[15239.536529] Disabling unused clock "gpt10_fck"
[15239.536560] Disabling unused clock "iva2_ck"
[15239.536560] Disabling unused clock "dpll4_m6x2_ck"
[15239.536590] Disabling unused clock "dpll4_m5x2_ck"
[15239.536590] Disabling unused clock "dpll3_m3x2_ck"
[15239.536621] Disabling unused clock "sys_clkout1"
[15239.536651] VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 1
[15239.576446] Console: switching to colour frame buffer device 100x30
[15239.649902] mmc0: host does not support reading read-only switch. assuming write-enable.
[15239.658081] mmc0: new SD card at address a95c
[15239.663055] mmcblk0: mmc0:a95c SD128 123008KiB 
[15239.667907]  mmcblk0: p1
[15239.761627] twl4030_rtc twl4030_rtc: setting system clock to 2010-06-06 17:13:03 UTC (1275844383)
[15239.879028] UBIFS: mounted UBI device 0, volume 0, name "rootfs"
[15239.885131] UBIFS: file system size:   508354560 bytes (496440 KiB, 484 MiB, 3940 LEBs)
[15239.893218] UBIFS: journal size:       9033728 bytes (8822 KiB, 8 MiB, 71 LEBs)
[15239.900604] UBIFS: media format:       w4/r0 (latest is w4/r0)
[15239.906463] UBIFS: default compressor: lzo
[15239.910858] UBIFS: reserved for root:  0 bytes (0 KiB)
[15239.917327] VFS: Mounted root (ubifs filesystem).
[15239.922180] Freeing init memory: 148K
[15241.153656] udev: starting version 151
[15242.108825] ads7846 spi1.0: touchscreen, irq 254
[15242.114166] input: touchscreen as /devices/platform/omap2_mcspi.1/spi1.0/input/input5
[15244.974731] usbcore: registered new interface driver usbserial
[15244.980773] usbserial: USB Serial support registered for generic
[15244.986999] usbcore: registered new interface driver usbserial_generic
[15244.993591] usbserial: USB Serial Driver core
[15247.021972] NET: Registered protocol family 10
[15247.031097] FAT: bogus number of reserved sectors
[15247.036163] VFS: Can't find a valid FAT filesystem on dev mmcblk0.
[15247.069793] usbserial: USB Serial support registered for pl2303
[15247.075958] pl2303 1-2.3:1.0: pl2303 converter detected
[15247.094604] usb 1-2.3: pl2303 converter now attached to ttyUSB0
[15247.100738] usbcore: registered new interface driver pl2303
[15247.106445] pl2303: Prolific PL2303 USB to serial adaptor driver
[15247.711425] UBIFS: mounted UBI device 1, volume 0, name "boot"
[15247.717407] UBIFS: file system size:   8386560 bytes (8190 KiB, 7 MiB, 65 LEBs)
[15247.725067] UBIFS: journal size:       1032193 bytes (1008 KiB, 0 MiB, 6 LEBs)
[15247.732360] UBIFS: media format:       w4/r0 (latest is w4/r0)
[15247.738250] UBIFS: default compressor: lzo
[15247.742370] UBIFS: reserved for root:  396117 bytes (386 KiB)
[15248.463012] input: nub0 as /devices/platform/i2c_omap.3/i2c-adapter/i2c-3/3-0066/input/input6
[15248.697418] input: nub1 as /devices/platform/i2c_omap.3/i2c-adapter/i2c-3/3-0067/input/input7
[15257.479095] Generic kernel compatibility enabled based on linux-next next-20100113
[15257.752075] cfg80211: Calling CRDA to update world regulatory domain
[15258.380859] g_cdc gadget: using random self ethernet address
[15258.386657] g_cdc gadget: using random host ethernet address
[15258.393218] usb0: MAC 1a:4e:ae:f0:2e:f8
[15258.397064] usb0: HOST MAC e6:ec:70:e2:cf:6c
[15258.401763] g_cdc gadget: CDC Composite Gadget, version: King Kamehameha Day 2008
[15258.409576] g_cdc gadget: g_cdc ready
[15258.413269] musb_hdrc musb_hdrc: MUSB HDRC host driver
[15258.418609] musb_hdrc musb_hdrc: new USB bus registered, assigned bus number 2
[15258.426391] usb usb2: configuration #1 chosen from 1 choice
[15258.432220] hub 2-0:1.0: USB hub found
[15258.436035] hub 2-0:1.0: 1 port detected
[15258.557159] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[15258.564117] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[15258.571380] usb usb2: Product: MUSB HDRC host driver
[15258.576416] usb usb2: Manufacturer: Linux 2.6.27.46-omap1 musb-hcd
[15258.582641] usb usb2: SerialNumber: musb_hdrc
[15258.932739] ADDRCONF(NETDEV_UP): usb0: link is not ready
[15258.958465] lib80211: common routines for IEEE802.11 drivers
[15258.964294] lib80211_crypt: registered algorithm 'NULL'
[15259.078857] lib80211_crypt: registered algorithm 'TKIP'
[15259.185485] lib80211_crypt: registered algorithm 'WEP'
[15259.247222] lib80211_crypt: registered algorithm 'CCMP'
[15259.445068] Pandora WiFi: Probe started
[15259.470275] Sending insert event for MMC3...
[15259.474578] Pandora WiFi: Probe done
[15259.530975] mmc2: card claims to support voltages below the defined range. These will be ignored.
[15259.540252] mmc2: SDIO card claims to support the incompletely defined 'low voltage range'. This will be ignored.
[15259.562927] mmc2: new SDIO card at address 0001
[15259.634552] wl1251: using dedicated interrupt line
[15260.150787] phy0: Selected rate control algorithm 'minstrel'
[15260.151672] wl1251: loaded
[15260.154785] wl1251: initialized
[15261.407958] sdio_reset_comm():
[15261.431579] wl1251_sdio mmc2:0001:1: firmware: requesting wl1251-fw.bin
[15262.266967] wl1251: 151 tx blocks at 0x3b788, 35 rx blocks at 0x3a780
[15262.267211] wl1251: firmware booted (Rev 4.0.4.3.5)
[15262.290496] phy0: device now idle
[15262.363494] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[15277.862060] phy0: device no longer idle - scanning
[15278.595428] phy0: device now idle
[15278.600555] phy0: device no longer idle - scanning
[15279.319885] phy0: device now idle
[15291.947540] phy0: device no longer idle - scanning
[15292.717742] phy0: device now idle
[15292.724670] phy0: device no longer idle - scanning
[15292.725982] wlan0: deauthenticating from cfbb342c by local choice (reason=3)
[15292.876708] wlan0: authenticate with cf2ab548 (try 1)
[15292.885009] wlan0: authenticated
[15292.885070] phy0: device now idle
[15292.914581] phy0: device no longer idle - working
[15292.931243] wlan0: associate with cd97c308 (try 1)
[15292.944488] wlan0: RX AssocResp from cd374e1a (capab=0x431 status=0 aid=2)
[15292.944519] wlan0: associated
[15292.944549] phy0: Allocated STA cd32ade8
[15292.945892] phy0: Inserted STA cd32ade8
[15293.005279] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[15303.282653] wlan0: no IPv6 routers present
[15404.407653] No probe response from AP cdb45ebc after 500ms, try 1
[16319.370666] aufs test_add:243:mount[2029]: uid/gid/perm /mnt/pnd/fennec 1000/1000/0777, 0/0/0755
[16583.525268] keyboard.c: can't emulate rawmode for keycode 187
[16583.658020] keyboard.c: can't emulate rawmode for keycode 187
[16864.659393] keyboard.c: can't emulate rawmode for keycode 191
[16864.822235] keyboard.c: can't emulate rawmode for keycode 191
[18104.434387] keyboard.c: can't emulate rawmode for keycode 184
[18104.589813] keyboard.c: can't emulate rawmode for keycode 184

und er Inhalt von /dev/:
Code: 
<i>
</i>tusters_kasten:/dev$ ls
adsp		 mtd0ro		     rtc     tty33  tty7
audio		 mtd1		     rtc0    tty34  tty8
bc_cat		 mtd1ro		     serial  tty35  tty9
block		 mtd2		     shm     tty36  ttyGS0
bus		 mtd2ro		     snd     tty37  ttyS0
char		 mtd3		     stderr  tty38  ttyS1
console		 mtd3ro		     tty     tty39  ttyS2
cpu_dma_latency  mtd4		     tty0    tty4   ttyS3
disk		 mtd4ro		     tty1    tty40  ttyUSB0
dsp		 network_latency     tty10   tty41  twl4030-madc
fb		 network_throughput  tty11   tty42  ubi0
fb0		 null		     tty12   tty43  ubi0_0
fb1		 psaux		     tty13   tty44  ubi1
fb2		 ptmx		     tty14   tty45  ubi1_0
full		 pts		     tty15   tty46  ubi_ctrl
i2c-1		 pvrsrvkm	     tty16   tty47  udev_network_queue
i2c-3		 ram0		     tty17   tty48  urandom
initctl		 ram1		     tty18   tty49  usbdev1.1_ep00
input		 ram10		     tty19   tty5   usbdev1.1_ep81
kmem		 ram11		     tty2    tty50  usbdev1.2_ep00
kmsg		 ram12		     tty20   tty51  usbdev1.2_ep81
loop0		 ram13		     tty21   tty52  usbdev1.3_ep00
loop1		 ram14		     tty22   tty53  usbdev1.3_ep02
loop2		 ram15		     tty23   tty54  usbdev1.3_ep81
loop3		 ram2		     tty24   tty55  usbdev1.3_ep83
loop4		 ram3		     tty25   tty56  usbdev2.1_ep00
loop5		 ram4		     tty26   tty57  usbdev2.1_ep81
loop6		 ram5		     tty27   tty58  vcs
loop7		 ram6		     tty28   tty59  vcs1
mem		 ram7		     tty29   tty6   vcs7
mixer		 ram8		     tty3    tty60  vcsa
mmcblk0		 ram9		     tty30   tty61  vcsa1
mmcblk0p1	 random		     tty31   tty62  vcsa7
mtd0		 rfkill		     tty32   tty63  zero

output von "sudo gpsd -N -D5 ttys1"
Code: 
<i>
</i>gpsd: device open failed: No such file or directory - retrying read-only
gpsd: read-only device open failed: No such file or directory
gpsd: client(0): channel activation failed.
gpsd: client(0) turned on raw mode
gpsd: => client(0): GPSD,R=1
gpsd: checking client(0)
gpsd: detaching 127.0.0.1 (sub 0, fd 5) in detach_client
gpsd: client 127.0.0.1 (0) connect on fd 5
gpsd: checking client(0)
gpsd: <= client(0): r
gpsd: client(0): assigning channel...
gpsd: User requires 2, channel type is -2
gpsd: opening GPS data source at 'ttys1'
gpsd: device open failed: No such file or directory - retrying read-only
gpsd: read-only device open failed: No such file or directory
gpsd: client(0): channel activation failed.
gpsd: client(0) turned on raw mode
gpsd: => client(0): GPSD,R=1
gpsd: checking client(0)
gpsd: detaching 127.0.0.1 (sub 0, fd 5) in detach_client
gpsd: client 127.0.0.1 (0) connect on fd 5
gpsd: checking client(0)
gpsd: <= client(0): r
gpsd: client(0): assigning channel...
gpsd: User requires 2, channel type is -2
gpsd: opening GPS data source at 'ttys1'
gpsd: device open failed: No such file or directory - retrying read-only
gpsd: read-only device open failed: No such file or directory
gpsd: client(0): channel activation failed.
gpsd: client(0) turned on raw mode
gpsd: => client(0): GPSD,R=1
q
q^Cgpsd: Received terminating signal 2. Exiting...

Fertig editiert, das waren alle Infos die mir evtl. Brauchbar erscheinen...
 
Du musst gpsd das Device mit vollständigem Pfad angeben, also z.B. /dev/ttyS1 .
Auch ist die Schreibweise wichtig, /dev/ttyS1 und /dev/ttys1 sind nicht das selbe. Linux unterscheidet bei Dateinamen immer zwischen Groß- und Kleinbuchstaben.
 
Kleiner Tip bezüglich dmesg: um den ganzen unnützen Kram vor dem Anstecken eines USB-Gerätes zu sparen, der bei dmesg erscheint, kann man vor dem Anstecken des USB-Gerätes einfach einmal als root "dmesg -c" machen, dann wird wie gewohnt der Puffer ausgegeben, anschließend aber gelöscht. Beim nächsten Start von dmesg werden dann nur die inzwischen neu hinzugekommenen Statusnachrichten ausgegeben. Also ungefähr so:

dmesg -c
[USB-Gerät anstecken oder sonstige zu testende Aktion ausführen]
dmesg > bla.log

und bla.log in den Beitrag rein. Das wird dann übersichtlicher.
 
danke für das Feedback!

hab parallel noch gecheckt, dass sich die zeile

[15238.741729] usb 1-2.3: Manufacturer: Prolific Technology Inc.

wohl auf meine GPS-Maus bezieht. Sie ist also tatsächlich vorhanden, nur kann ich sie bisher nicht richtig ansprechen. Ich schau mal was ich (und n mir bekannter linux-jünger) machen können, das wird schon! :)

werde fortschritte hier posten und dann am Ende vor allem einen kleinen Walk-through posten, dass man das Rad nicht 2mal erfinden muss..
 
Noch was kleines am Rande, wer hat hierbei auch zuerst an Dragonball gedacht? ^^
[15258.401763] g_cdc gadget: CDC Composite Gadget, version: King Kamehameha Day 2008
Click to expand...

Wird die GPS-Maus auch in lsusb angezeigt? (Ich geh davon jetzt mal aus..)

Im Ubuntuusers Wiki steht das hier:
NaviLock NL-302U (läuft sofort unter /dev/ttyUSB0)
Click to expand...

Dieses Device gibt es auch bei dir. Probier das mal aus mit gpsd.
 
You must log in or register to reply here.

Similar threads

TuxBrain
Wifi - Wlan keine Verbindung möglich !?
2
Replies
20
Views
6K
zapman
zapman
dementio
Bluetooth mouse
Replies
8
Views
3K
TrashyMG
TrashyMG
L
A Lot Of Pnd's Run Only Once
Replies
17
Views
5K
skeezix
skeezix
L
A Lot Of Pnd's Run Only Once
Replies
2
Views
3K
laurens
L
J
Can't Get Wifi Iface To Come Up At All
Replies
7
Views
2K
thetictacaddict
T
Back
Top