Problem changing Pandora's case


Schete

Still Fresh
Joined
Aug 17, 2015
Messages
18
Hi,

my Pandora's case has a broken corner so I ordered a new one at dragonbox.

Unfortunately I'm not able to loosen the two screws below, they just seem overrun (not the two under the battery) so I can't change the case.

Does anyone have an idea how I could change the case anyway?
 
I tried but I put so much pressure on the screws that they are completely fucked up now :/

No screwdriver can gain hold because they are almost round.

Any idea how I might be able to fix this?
 
Last edited by a moderator:
Yeah, I rounded off the caps of my bottom two screws when I first tried to get them out. Thankfully, a nice, round, pointed pit makes a good place to put a drill bit, and I drilled out the screws very carefully instead using a manual drill. It's quite difficult to do well though, since while the aluminium of the screw is a soft metal, it's still a lot harder than the plastic case, so you need to drill dead straight, and not beyond the end of the screw.
 
That's an excellent idea, thank you! I'll try that as soon as I can get my hand on a drill :)
 
Back
Top