Pcsx4All Caanoo Beta Testing Results


I so new this game would run well as its a direct port from the PC and works good on every psx emulator Ive ever tried :D

Exhumed/Powerslave Pal
Format bin/cue
Caanoo Clock 750Mhz
CPU Clock 50% Rest Default settings
FPS = 23/16
Compatible, no graphical glitches - would have to say easily full speed, super playable just the music a little offish.. also save game worked for this game.

May have to do a video of this one for you all ;)
 
Tomba! (Caanoo) - NTSC

Format - .img
Clock - 700 Mhz
Default settings (Frame-skip set to 0)
Sound ON
FPS - 54 / 60 in video, 20 / 60 or so
Hangs once Tomba hits the ground (dang.) - I suppose I had frame-skip on (and high), and that's why the max FPS was 20.
 
Megaman Legends 2 - NTSC

Format - .img
WIZ Clock - 750 Mhz
Default settings (Frame-skip set to 0)
Sound ON - XA + CD Audio
Hangs after Capcom logo
FPS - 60/60 on... Logo.
 
resident evil 2 dual shock (u) works very well.
but i can't play full game because in game saves crash
average fps around 50/60 and sometimes over 60
some graphical glitches and slowdown when there is. fire animation.

settings
clock 800
ram tweaks on
frameskip 0
interlace progressive
sound on
cpu clock %100
cpu bias 7
cpu core bios
cpu type auto
auto save
parasite eve 2, vandal hearts game fix
 
blues2 said:
resident evil 2 dual shock (u) cue/bin works very well.
but i can't play full game because in game saves crash
average fps around 50/60 and sometimes over 60
some graphical glitches and slowdown when there is. fire animation.

settings
clock 800
ram tweaks on
frameskip 0
interlace progressive
sound on
cpu clock %100
cpu bias 7
cpu core bios
cpu type auto
auto save
parasite eve 2, vandal hearts game fix
Click to expand...

opps clicked reply by accident. forgot to add iso type and sound xa-cd

it took me many hours to find these configurations so don't give up on a game you want to work!
 
Last edited by a moderator:
All games tested on CAANOO with firmware 1.50

Tempest X3:FULL SPEED SOUND IS A LITTLE OFF 100% playable

Settings are as follows

WIZ Clock: 750
RAM Tweaks: ON
Frame-Limit: OFF
Frame-Skip: 0 (Video)
Interlace: OFF
Sound: ON (XA+CD-Audio)
CPU Clock: 80%
CPU Bias: 8
CPU Core: HLE
CPU Type: Auto
Auto Save: OFF
No Game Fixes


Bubble Bobble - Featuring Rainbow Islands

Full speed plays great!

Settings are as follows

WIZ Clock: 750
RAM Tweaks: ON
Frame-Limit: ON
Frame-Skip: 0 (Video)
Interlace: OFF
Sound: ON (XA+CD-Audio)
CPU Clock: 100%
CPU Bias: 4
CPU Core: HLE
CPU Type: Auto
Auto Save: OFF
No Game Fixes


Bust a move 4: Fully playable a little slow at times.

Settings are as follows

WIZ Clock: 750
RAM Tweaks: ON
Frame-Limit: ON
Frame-Skip: 2 (Video)
Interlace: OFF
Sound: ON (XA+CD-Audio)
CPU Clock: 100%
CPU Bias: 4
CPU Core: HLE
CPU Type: Auto
Auto Save: OFF
No Game Fixes


Bust A Move 99: Fully playable a little slow at times.

Settings are as follows

WIZ Clock: 750
RAM Tweaks: ON
Frame-Limit: ON
Frame-Skip: 2 (Video)
Interlace: OFF
Sound: ON (XA+CD-Audio)
CPU Clock: 100%
CPU Bias: 6
CPU Core: HLE
CPU Type: Auto
Auto Save: OFF
No Game Fixes


Bust A Move 2: Fully Playable little slow at times.

Settings are as follows

WIZ Clock: 750
RAM Tweaks: ON
Frame-Limit: ON
Frame-Skip: 2 (Video)
Interlace: OFF
Sound: ON (XA+CD-Audio)
CPU Clock: 100%
CPU Bias: 4
CPU Core: HLE
CPU Type: Auto
Auto Save: OFF
No Game Fixes


Konami Arcade Classics: Fully Playable some games are slow others like TIME PILOT work PERFECT!

Settings are as follows

WIZ Clock: 750
RAM Tweaks: ON
Frame-Limit: OFF
Frame-Skip: 2 (Video)
Interlace: OFF
Sound: ON (XA)
CPU Clock: 100%
CPU Bias: 4
CPU Core: HLE
CPU Type: Auto
Auto Save: OFF
No Game Fixes

MDK boots and runs but numerous graphic glitches. Speed and sound are great. Setting different fixes locks the game up.

Settings are as follows

WIZ Clock: 750
RAM Tweaks: OFF
Frame-Limit: OFF
Frame-Skip: 2 (Video)
Interlace: OFF
Sound: ON (XA+CD-Audio)
CPU Clock: 100%
CPU Bias: 6
CPU Core: HLE
CPU Type: Auto
Auto Save: OFF
No Game Fixes


Megaman 8: Works but a little slow

Settings are as follows

WIZ Clock: 750
RAM Tweaks: ON
Frame-Limit: OFF
Frame-Skip: 2 (Video)
Interlace: OFF
Sound: ON (XA+CD-Audio)
CPU Clock: 100%
CPU Bias: 4
CPU Core: HLE
CPU Type: Auto
Auto Save: OFF
No Game Fixes

Metal Slug X: Fully playable a little too fast.


Settings are as follows

WIZ Clock: 750
RAM Tweaks: ON
Frame-Limit: OFF
Frame-Skip: 0 (Video)
Interlace: OFF
Sound: ON (XA+CD-Audio)
CPU Clock: 100%
CPU Bias: 4
CPU Core: BIOS
CPU Type: Auto
Auto Save: OFF
No Game Fixes

I am going to test the same games on my WIZ later tonight and post the results with fps and errors.

Here is a compatibility list for the WIZ version:
https://spreadsheets.google.com/ccc?key=0AmAByCjdBqwudHpyYjR5YjY4Nml2UFBkQVdVanVhSVE&hl=en&authkey=CNKrjdIF#gid=0

You can use it to test the same games on the CAANOO using the WIZ settings
 
@Qbert - I don't know, but if a game runs too fast, you could pull down the overclocking to slow it down, probably. Or, perhaps you could change the CPU Clock settings. Anyway...

(Caanoo) Lego Racers - U.S. Release, so should be NTSC
Wiz Clock: 700
Ram Tweaks: Off
Framelimit: Off
Frameskip: 0
Interlace: Off
Sound: ON (XA+CD - Audio)
CPU Clock: 100%
CPU Bias: 7
CPU Core: HLE
CPU Type: Auto
Auto-save: On
No game fixes

FPS: Full-speed at intro videos, as far as I can tell. Using memory cards is broken. Extreme graphical glitches (characters and meshes appear as shifting rectangles). Crashes when changing from Loading screen to game screen.
 
Yeah I just set it to limit frame rate and it fixed the issue. Setting the CPU down to 80 and the bias up to 8 when you lower the cpu seems to fix the too fast issue as well. The overclocking feature doesnt seem to do much at all when going up in speed or down. I also noticed that if you switch stuff around too many times the sound goes all wonky but exiting out of the emu then going back in seems to fix that issue.
 
Deception III - Dark Delusion img+ccd+sub, a beautiful 3d game running at full speed with all sounds and no slowdown except at title screen. i was very surprised by this one!

latest firmware installed
700-750 mhz
ram tweaks on
frame limit off
frame skip 0
interlace off
sound xa+cd
cpu clock %100
bias 7
core hle
 
Spyro the Dragon PAL
Caanoo Clock: 750mhz
Format: BIN
Default Settings, video frameskip OFF.
Compatible, Slow, approaching Moderate. An occasional flash of colour will appear during play, otherwise no glitches. Sound seems a-ok, limited only by framerate. Game runs surprisingly well, with framerates of 50/50 during low-poly sections (loading screens, etc) with 25-30/50 during actually gameplay.
 
tekken 3 bin+cue 45/60 fps
feels like it's %10 slow but then again these 3d fighting games always feels slow to me! but very playable!

latest firmware installed
800 mhz
ram tweaks on
frame limit off
frame skip 0
interlace off
sound xa+cd
cpu clock %100
bias 7
core hle
 
pandemonium Pal
Caanoo Clock 750Mhz
Format .iso
Default Settings
Uncompatible, because it gets as far as the piracy screen and then screen goes dark and hangs on lots of settings,
Shame what a nice platformer...
 
Tobal NO:1 NTSC
Caanoo Clock 800Mhz
Format .ccd .img .sub .cue
bias 7 rest default settings
Compatible to a certain extent, nice intro but music slightly off soon as its finish to title screen
The screen goes all pixelated and full of colours then hangs up the caanoo.
 
Thrill Kill Full and uncensored NTSC bin+cue
CPU Clock 750 MHz
Default Settings
10-12 FPS
Comaptible slow, minor graphical glitches, screen goes black for a short time (0,25 seconds maybe) in certain camera angles.
 
By the way, Chui told me that memory card is supported (in public build and new beta) but it seems it´s giving problems in some games (apparently, buggier in the new beta)

So, if possible, add this test to your reports, please (The more details, the better feedback you provide ;))
 
Ridge Racer PAL cue+bin

800 MHz
Default Settings
35-50 FPS sound issues, music is missing
 
chrono cross ntsc img+ccd+sub.
fmv intro custcene doesn't have sound and has graphic probllems in any config, and game won't start when starting a game. opening cutscene in the start of a new game just won't start. title screen and demos run fullspeed with all sounds and music so it is possible to play when past the fmv cutscene.

bias 7
mhz over 650
 
Crashbandicoot NTSC
CPU Clock 700Mhz
Format .img .ccd .sub (there was no .cue file)
Default Settings
Uncompatible, Black screen straight away no matter what I tried

P.S maybe some else should try this as it could be my image
 
Resident Evil (Directors Cut) NTSC
CPU Clock 700/750 tried a few settings
Format .iso
Default Settings
Uncompatible, if you use HLE it throws you straight back to the emulator menu, but if you use Bios
It will just boot the sony logo then freeze.

P.S It could be the image on this one too

P.SS THIS IS A BAD IMAGE OF THE GAME, SEE LATER POST!!!
 
Legend of Dragoon NTSC
CPU CLOCK: 750
FORMAT: ISO
DEFAULT SETTINGS

game boots, menu works, able to start a new game, intro video plays, freezes after video has played, able to menu back to caanoo menu
 
You must log in or register to reply here.

Similar threads

3djake
Shortcut To Emulated Game?
Replies
1
Views
3K
ruffnutts
ruffnutts
A
Pcsx4All - Blank Screen. What Am I Doing Wrong ?
Replies
1
Views
2K
SolarLune
SolarLune
K
How To Use Save States In Pcsx4All
Replies
6
Views
5K
andyB911
andyB911
chigimonky
Castlevania Pcsx Rearmed Fullscreen?
Replies
4
Views
6K
notaz
notaz
Khan
Pcsx4All For Caanoo Leaked At Openhandhelds
2
Replies
24
Views
5K
j6cubic
J
Back
Top