Stephane Hockenhull
Member
- Joined
- Sep 12, 2010
- Messages
- 282
P2 needs either 3 really HUGE contact pads with multiple contact pins or have a battery cable.
Mine kept resetting until I jammed a lot of paper all around to keep the battery in place.
it does have the rubber shims, it wasn't enough, putting it on a table was enough to reset it (one side "dropped" from less than 5mm high).
its fine now but I had to spend a good 40mins adjusting paper thickness so I could hit the sweet spot of closing the lid without force and holding the battery firmly in place.
Mine kept resetting until I jammed a lot of paper all around to keep the battery in place.
it does have the rubber shims, it wasn't enough, putting it on a table was enough to reset it (one side "dropped" from less than 5mm high).
its fine now but I had to spend a good 40mins adjusting paper thickness so I could hit the sweet spot of closing the lid without force and holding the battery firmly in place.