Titcher
Active Member
- Joined
- Nov 10, 2003
- Messages
- 539
Make sure you check the polarity, you'll probably have to swap it around, if you put in the wrong polarity it will blow a diode.
Last edited by a moderator:
I Just Picked Up My Gp32. It's A Blu.
- Thread starter Bloodsack
- Start date
Make sure you check the polarity, you'll probably have to swap it around, if you put in the wrong polarity it will blow a diode.
Hanz™
FIGHT THE POWER! :D
No it doesn't I've done it wrong loads of times. It just doesn't turn on. I wouldn't keep it on the wrong polarity for longer than about 10 seconds though, just in case something does happen...
Bu I have done this wrong plenty of times I assure you...
Last edited by a moderator:
Quiest
I like turtles!
Last edited by a moderator:
trooper
Trooper`s watching you !!!
But its better to be safe than sorry, As everyone must know by now i was one of the unlucky one`s and fried my GP with the wrong polarity. It`s the luck of the draw, But why tempt fate. :rolleyes:
Trooper
Last edited by a moderator:
Bloodsack
Member
ok...I picked up this recharger called Hama. It came with 4 rechargeable batteries at 2400 mah and it's a NiMH. I know It'll take longer to rechage, but don't care....I'm not going to play the system 24/7 so a longer recharge is fine.
How much time would I get from these batteries?
How much time would I get from these batteries?
Bloodsack
Member
Whats the Sources file for? like I said before, I'm still new to these emu's on gp32. I need both Binary (.FXE) and the Sources? Where do I put the Sources at?
Thanks
trooper
Trooper`s watching you !!!
You don`t need the sources, These are for programmers, Just the fxe`s will do.
Good choice on the batteries, Not sure of the make but 2400mah is very good and not having the 15 mins charger, Your batteries will thank you for it. You should expect around 6-7 hours, Maybe more, But it depends on what you using the GP for and at what speed you are running it at.
Trooper
Good choice on the batteries, Not sure of the make but 2400mah is very good and not having the 15 mins charger, Your batteries will thank you for it. You should expect around 6-7 hours, Maybe more, But it depends on what you using the GP for and at what speed you are running it at.
Trooper
M
Magus 86
Guest
Wait a minute... if he got a BLU, it's probably a BLU+, so why tell him to use OSNES9XGP v0.2, unless it was BLU+ fixed, and I somehow missed it?
Bloodsack
Member
Cool.
Wow...6 to 7 hours is great! I'll mostly use the gp32 for emu's. I have my psp for movies
Thanks
Bloodsack
Member
Which one should I use? I have the blu, not the blu+.
Goity
VIP Sleaze
use 0.2.
plus I find panasonic powermax 3 disposable batteries are very good
Last edited by a moderator:
M
Magus 86
Guest
are you completely sure? it won't say BLU+ on the box, that's just a name given to the new BLU's, I think started by someone from this forum, that have a different screen than the old ones. GamePark decided to change to a different screen manufacturer one day, and a lot of software was buggy with the new screens. Most of it has been fixed now though. just try osnes9xgp v0.2, and if you see this...
Then it's a BLU+, in which case you'll need to get a hold of the BLU+ fixed version of osnes9xgp v0.3. There's a greyish bar near the top of the screen that covers up whatever's supposed to appear there, and it's really annoying.
Then it's a BLU+, in which case you'll need to get a hold of the BLU+ fixed version of osnes9xgp v0.3. There's a greyish bar near the top of the screen that covers up whatever's supposed to appear there, and it's really annoying.
Attachments
Bloodsack
Member
Yeah....it say Blu. thats it.
Bloodsack
Member
ok....I'll try It in a few hours....me and the wife are going out for dinner. when I come back I'll see if it does that. thanks. I guess I'll know now weather If It's a blu or blu+
thanks for the little bit of info.
BobBorakovitz
Hardcore Gamer
well, if you can run DrMD perfectly on it's default settings, then you have a BLU...
If you have a BLU+ you have to switch the settings in DrMD to Samsung screen, AFAIK..
So, you should be able to test which BLU unit you have with that...since it's installed already
Also it can be used to see how fast your BLU/BLU+ will operate....
welcome to the scene!
-BobBorakovitz
If you have a BLU+ you have to switch the settings in DrMD to Samsung screen, AFAIK..
So, you should be able to test which BLU unit you have with that...since it's installed already
Also it can be used to see how fast your BLU/BLU+ will operate....
welcome to the scene!
-BobBorakovitz
triksR4rabits
The Dutchmaster
osnes .3 is superior to .2 when playing without sound. With sound enabled, however, .2 is far better, though you will need to run at a high clockspeed.
welcome
Last edited by a moderator:
shinneri
Certified Guru
Esn
(:";
Actually, the Donkey Kong Country games run really well on osnesv0.3 with sound... better than on v0.2. My GP only goes up to 156Mhz, but it's good enough. B)
Bloodsack
Member
In the settings or DrMD it says LCD Samsung, then I switch it over to Taiwanese the DrMD logo on top goes to the bottom. and the rez gets a little blurry.
So far.....the emu's I have running already are....Genesis/DrMD, PC Engine/GPengine.v 04 & NES/Littlejohn. all work like a charm.
One thing on the Snes....I can't download Snes ver 0.2....The download page isn't working.
anybody have any link.
thanks
Blah
Wanna Be Programmer
Samsung Screen = NLU,FLU,BLU
Taiwanese Screen = BLU+
Yours is a BLU
Taiwanese Screen = BLU+
Yours is a BLU
Similar threads
