Gp2x Cant Find Sd/nad

[tim0391]

hi guys just got my gp2x today for christmas but im having a few problems.
i have used ot for about 3 hours and i went to put more stuff on to my sd card, after doing so i put it back into my gp2x and went to go on to the utility i put on. nothing was there not even the other apps i put on perviously so i went to look at games and nothing the nad and nothing, so i changed my batteries to see if it made a differance which it did not.

so i was wondering if anyone has had the same problem in the past and how i can fix it

thanxs

tim

 

[PingPong]

Hi there, merry christmas one and all...
I have had the same problem as well ... got the SD card 2day, (sandisk 4.0GB + came with a free sd reader ) the problem i have have is i got now about 9 diffrent SD cardds which DONT work...(untill today ) but the GP2X is not picking up the files on the card... nor can i connect to PC from the SD storage
so this is leaving a bitter taste in ones mouth....

i just want to play Duke3d on the way to work PLEASE HELP make my life better...

many thanks ,
Clark

http://purelegends.yoomie.net/

 

[tim0391]

thanks for the reply but can you access the nand memory built into your gp2x ?

tim

 

[PingPong]

thanks for the reply but can you access the nand memory built into your gp2x ?

tim

yes i can all is well there...

the problem i get is (i think) that the SD card is comming up blank on the GP2x.
i got it this morning, formatted it then put on about 3.3 Gb on it... nothing
re-formatting the card a few times to see if it might of worked, but no luck so far...

can any one help?

 

[TelcoLou]

Are you formatting the card as FAT32? Can your PC see the files?

 

[PingPong]

Are you formatting the card as FAT32? Can your PC see the files?

yes the cat is formatted @ FAT32 its a sandisk4.0Gb card i formatted it via a SD card reader.

and yes the PC can see the files fine..

im using firmware 2.1.0 at the mo wondering if i should update to 2.1.1?

many thanks 4 the reply

 

[tim0391]

yes i can all is well there...

the problem i get is (i think) that the SD card is comming up blank on the GP2x.
i got it this morning, formatted it then put on about 3.3 Gb on it... nothing
re-formatting the card a few times to see if it might of worked, but no luck so far...

can any one help?

o well we got sort of the same problem but can access your nand whereas i cant

Are you formatting the card as FAT32? Can your PC see the files?

my 2gb kingston and my 512mb kingston are both formated as fat32 and yes they can be read by the pc (in a card reader)

yes the cat is formatted @ FAT32 its a sandisk4.0Gb card i formatted it via a SD card reader.

and yes the PC can see the files fine..

im using firmware 2.1.0 at the mo wondering if i should update to 2.1.1?

many thanks 4 the reply

i was thinking of upgrading my firmware to 2.1.1
but i cant becuase even when i put in a blank card with only firmware upgrade on it will not see it and begin the upgrade

o well there is allways 2mora to try again

tim

 

[PingPong]

so any one out there can help us on this problem of ours???
Please mail back... clark

 

[SeX1eStAsaBa]

This never happened when I was using 2.0.0. Now I got 2.1.1 and now this happens =/