Foam Pads for Shoulder Buttons


Cas

Active Member
Joined
Sep 6, 2010
Messages
613
Hi


I was wondering if it would be possible to get hold of some of those foam pads for the


shoulder buttons ?


I put for Craig because I am in the UK
 
Last edited by a moderator:
It would probably be more economical just to tell us the type and thickness so we can get the same stuff. And a little detail on if/how the buttons are ground down to accommodate.


I'd be interested in this info too.
 
It would probably be more economical just to tell us the type and thickness so we can get the same stuff. And a little detail on if/how the buttons are ground down to accommodate.


I'd be interested in this info too.


Hi


Type and thickness, best I can do on this is refer you Moxies thread which contains pictures. link will follow.


The amount to remove and where from.


When you look at the buttons in Moxies pictures the area I scraped a small amount away from was the area under


the foam. Also on the button there is part of it which stops against the case on its outward travel, I have read somebody


removed part of this also. It all seems about the travel I and do not think the foam should be there, but is being used if the


travel is deemed not correct in the build of each unit.


Link to Moxies Pictures.
 
Last edited by a moderator:
Back
Top