Firmware Flashing Help

[DarkAeden]

i just followed the instructions to instal aquafish multifw 5.1....installed correctly....then i deleted fw.bin, fw.fxe, bwconf.fxe and conf.zpr...and now my gp32 starts only with the euro firmware and i cannot use pclink....!!!!HOW CAN I DO, PLEASE HELP!!

 

[damaki]

i just followed the instructions to instal aquafish multifw 5.1....installed correctly....then i deleted fw.bin, fw.fxe, bwconf.fxe and conf.zpr...and now my gp32 starts only with the euro firmware and i cannot use pclink....!!!!HOW CAN I DO, PLEASE HELP!!

Push R while booting. Now you're in pacrom which has a pclink function in its main menu.

 

[zenocha]

and put gpdrive on your smc which stops you neeeding pclink, has faster transfer rates, allows gp32 to be used as a mass storage device in windows and is just generally better. You can get it from the beta area on the boards i think.

 

[Horscht]

Zenocha: you should always mention, that you need WinXP to use GPdrive/phodrive. Im not sure if it works under W2000, and if there are drivers for 98/95/ME etc...

best bet would be a SMC reader/writer. You can get them pretty cheap (less than 8€/$), and they are inasnyl fast.

 

[mattmagoo]

first off, i dont think PCLINK works with V5

im not sure why it boots straight into the Euro FW

I assume u have already opened bwconf.fxe which sets up the conf.zpr file

 

[DarkAeden]

ok, ive already done with pacrom link mode...but how to restore aquafish mw boot loader zodiac style???Because now my gp32 starts directly from euro fw!!!