Finally got around to installing new nubs on my day 1 Pandora console.


mvickers03

Active Member
Joined
Sep 4, 2009
Messages
661
Age
39
Location
Manchester
I was lucky enough to meet the team at Craigix's place. Meeting them I have to say I was absolutely star struck. I don't think I've ever been more nervous. I have my day 1 unit to show for it however. Number 74.

They have had faulty nubs since I got it. Evil Dragon very kindly sent me some in the post for free. 6 years later I am getting around to installing them.

It was a little tricky but going very slowly is the key.

They work lovely now with rev 2.0 nubs

Today is a good day for my Pandora console.

Please feel free to say hi, especially if you remember the hype train of 2 months TM.
I've been quietly enjoying my Pandora ever since. I still love to watch Evil Dragons Pyra videos on YouTube. I think I would really enjoy a Pyra but for now my Pandora does everything I need it for.
 

Attachments

  • 20191031_160944.jpg
    20191031_160944.jpg
    1.3 MB · Views: 467
  • 20191031_163406.jpg
    20191031_163406.jpg
    1.3 MB · Views: 448
  • 20191031_171950.jpg
    20191031_171950.jpg
    1.3 MB · Views: 461
  • 20191031_173606.jpg
    20191031_173606.jpg
    1 MB · Views: 446
  • 20191031_173758.jpg
    20191031_173758.jpg
    2.5 MB · Views: 433
Last edited:
I don't think I've ever seen under a nub before. Are those four silver surfaces contacts (although I can't detect any lines going from them, which is odd) or stickers protecting the surface or something else? I always assumed the six solder points were the interface between the nub and the CPU but maybe they're just there for mechanical grip.

Edit: They're versus There versus Their screw-up. Again, damnit.
 
Last edited:
I don't think I've ever seen under a nub before. Are those four silver surfaces contacts
The red circles line up with dimples on the nub for orientation. Then the 6 black circled pads surrounding the edge of the nub are the solder points. The nub is held into position by these 6 solder points and is also reinforced with the case as is quite a snug fit, not sure if conducts via the solder points or the 4 points underneath.
Post automatically merged:


Edit: underneath the old nub is 4 screws that roughly line up with the 4 pads underneath, but contact would be poor at best so I am going to guess they all ground and the solder points are the data lines plus extra to make sturdy.
 

Attachments

  • Screenshot_20191031-205812_Gallery.jpg
    Screenshot_20191031-205812_Gallery.jpg
    564.5 KB · Views: 403
  • Like
Reactions: rSl
Not as such. He started out as a reseller of the gp2x as I recall, and after that peaked he decided to invent (with heavy input from the gp32x boards) the Pandora. He, with lots of help from mweston and davec and fatih and a little help from ED came up with it, then after making a few hundred probably he had some kind of nervous breakdown and turned into a nasty piece of work on these boards. He fell out with almost everyone here and production stalled, then he did some things which might be a little bit scammish, and then ED had to dive in and rescue us all from the mess.
 
Craig started way earlier, selling GBA flashcarts (and even earlier with porn warez cds :p)

But he was the main distributor of the GP32 in Europe, which is how he came into the whole scene.
 
Craig started way earlier, selling GBA flashcarts (and even earlier with porn warez cds :p)

But he was the main distributor of the GP32 in Europe, which is how he came into the whole scene.

Thanks again so much for the nubs.

They work perfect.

I have been looking for a new display cable for my Pandora. Is there anyway you can help please?
 
Back
Top