spiralofhope
Member
Related: http://boards.openpa...-external-wifi/
Steps I've done:
- disable the internal wifi
- enable usb host
- insert the dongle
- dmesg
I confirm that the device is detected.
The wireless icon in the toolbar shows me as disconnected. I cannot ping anything.
What should I do next?
lsusb
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 002: ID 0ace:1215 ZyDAS WLA-54L 802.11bg
dmesg
Steps I've done:
- disable the internal wifi
- enable usb host
- insert the dongle
- dmesg
I confirm that the device is detected.
The wireless icon in the toolbar shows me as disconnected. I cannot ping anything.
What should I do next?
lsusb
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 002: ID 0ace:1215 ZyDAS WLA-54L 802.11bg
dmesg
[ 0.000000] Linux version 3.2.17 (notaz@pixelinis) (gcc version 4.3.3 (Sourcery G++ Lite 2009q1-203) ) #649 Thu May 24 02:31:09 EEST 2012
[ 0.000000] CPU: ARMv7 Processor [411fc083] revision 3 (ARMv7), cr=10c5387d
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT nonaliasing instruction cache
[ 0.000000] Machine: Pandora Handheld Console
[ 0.000000] Reserving 8388608 bytes SDRAM for VRAM
[ 0.000000] Memory policy: ECC disabled, Data cache writeback
[ 0.000000] On node 0 totalpages: 127488
[ 0.000000] free_area_init_node: node 0, pgdat c04aa558, node_mem_map c04d0000
[ 0.000000] Normal zone: 1024 pages used for memmap
[ 0.000000] Normal zone: 0 pages reserved
[ 0.000000] Normal zone: 126464 pages, LIFO batch:31
[ 0.000000] OMAP3430/3530 ES3.1 (l2cache iva sgx neon isp )
[ 0.000000] Clocking rate (Crystal/Core/MPU): 26.0/332/500 MHz
[ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
[ 0.000000] pcpu-alloc: [0] 0
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 126464
[ 0.000000] Kernel command line: ubi.mtd=4 ubi.mtd=3 root=ubi0:rootfs rootfstype=ubifs rw rootflags=bulk_read vram=6272K omapfb.vram=0:3000K mmc_core.removable=0 quiet
[ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.000000] Memory: 498MB = 498MB total
[ 0.000000] Memory: 500492k/500492k available, 23796k reserved, 0K highmem
[ 0.000000] Virtual kernel memory layout:
[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
[ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
[ 0.000000] vmalloc : 0xe0800000 - 0xf8000000 ( 376 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xe0000000 ( 512 MB)
[ 0.000000] modules : 0xbf000000 - 0xc0000000 ( 16 MB)
[ 0.000000] .text : 0xc0008000 - 0xc043fcbc (4320 kB)
[ 0.000000] .init : 0xc0440000 - 0xc0470000 ( 192 kB)
[ 0.000000] .data : 0xc0470000 - 0xc04aac00 ( 235 kB)
[ 0.000000] .bss : 0xc04aac24 - 0xc04cfa24 ( 148 kB)
[ 0.000000] SLUB: Genslabs=11, HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[ 0.000000] NR_IRQS:410
[ 0.000000] IRQ: Found an INTC at 0xfa200000 (revision 4.0) with 96 interrupts
[ 0.000000] Total of 96 interrupts on 1 active controller
[ 0.000000] OMAP clockevent source: GPTIMER1 at 32768 Hz
[ 0.000000] sched_clock: 32 bits at 32kHz, resolution 30517ns, wraps every 131071999ms
[ 0.000000] Console: colour dummy device 80x30
[ 0.000000] console [tty0] enabled
[ 0.000244] Calibrating delay loop... 497.82 BogoMIPS (lpj=1941504)
[ 0.039093] pid_max: default: 32768 minimum: 301
[ 0.039489] Mount-cache hash table entries: 512
[ 0.040039] Initializing cgroup subsys devices
[ 0.040100] CPU: Testing write buffer coherency: ok
[ 0.040374] hw perfevents: enabled with ARMv7 Cortex-A8 PMU driver, 5 counters available
[ 0.041412] devtmpfs: initialized
[ 0.062652] print_constraints: dummy:
[ 0.063171] NET: Registered protocol family 16
[ 0.063629] GPMC revision 5.0
[ 0.068511] OMAP GPIO hardware version 2.5
[ 0.073272] omap_mux_init: Add partition: #1: core, flags: 0
[ 0.081756] Reprogramming SDRC clock to 332000000 Hz
[ 0.084808] hw-breakpoint: debug architecture 0x4 unsupported.
[ 0.094512] omap-mcbsp.2: alias fck already exists
[ 0.094940] omap-mcbsp.3: alias fck already exists
[ 0.096893] OMAP DMA hardware revision 4.0
[ 0.119323] bio: create slab <bio-0> at 0
[ 0.120971] print_constraints: vwlan: 1800 mV
[ 0.123168] SCSI subsystem initialized
[ 0.126586] usbcore: registered new interface driver usbfs
[ 0.126953] usbcore: registered new interface driver hub
[ 0.127288] usbcore: registered new device driver usb
[ 0.129150] omap_i2c omap_i2c.1: bus 1 rev1.3.12 at 2600 kHz
[ 0.133239] twl4030: PIH (irq 7) chaining IRQs 368..375
[ 0.133361] twl4030: power (irq 373) chaining IRQs 376..383
[ 0.134094] twl4030: gpio (irq 368) chaining IRQs 384..401
[ 0.134704] _omap_mux_init_gpio: Could not set gpio192
[ 0.136108] _omap_mux_init_gpio: Could not set gpio193
[ 0.139587] print_constraints: VUSB1V5: 1500 mV normal standby
[ 0.140441] print_constraints: VUSB1V8: 1800 mV normal standby
[ 0.141387] print_constraints: VUSB3V1: 3100 mV normal standby
[ 0.143341] twl4030_usb twl4030_usb: Initialized TWL4030 USB module
[ 0.145141] print_constraints: vdd_mpu_iva: 600 <--> 1450 mV normal
[ 0.145996] print_constraints: vdd_core: 600 <--> 1450 mV normal
[ 0.147003] print_constraints: VMMC1: 1850 <--> 3150 mV at 3150 mV normal standby
[ 0.147949] print_constraints: VDAC: 1800 mV normal standby
[ 0.148925] print_constraints: VAUX2: 1800 mV normal standby
[ 0.149841] print_constraints: VPLL2: 1800 mV normal standby
[ 0.150817] print_constraints: VMMC2: 1850 <--> 3150 mV at 3150 mV normal standby
[ 0.151794] print_constraints: VSIM: 2800 mV normal standby
[ 0.152709] print_constraints: VAUX1: 3000 mV normal standby
[ 0.153594] print_constraints: VAUX4: 2800 mV normal standby
[ 0.154266] omap_i2c omap_i2c.3: bus 3 rev1.3.12 at 100 kHz
[ 0.157775] Advanced Linux Sound Architecture Driver Version 1.0.24.
[ 0.158874] Switching to clocksource 32k_counter
[ 0.190765] musb-hdrc: version 6.0, ?dma?, otg (peripheral+host)
[ 0.196166] musb-hdrc: ConfigData=0xde (UTMI-8, dyn FIFOs, bulk combine, bulk split, HB-ISO Rx, HB-ISO Tx, SoftConn)
[ 0.196197] musb-hdrc: MHDRC RTL version 1.400
[ 0.196197] musb-hdrc: setup fifo_mode 4
[ 0.196228] musb-hdrc: 28/31 max ep, 16384/16384 memory
[ 0.196929] musb-hdrc musb-hdrc: USB OTG mode controller at fa0ab000 using DMA, IRQ 92
[ 0.197875] NET: Registered protocol family 2
[ 0.198150] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.198577] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.199127] TCP bind hash table entries: 16384 (order: 4, 65536 bytes)
[ 0.199462] TCP: Hash tables configured (established 16384 bind 16384)
[ 0.199493] TCP reno registered
[ 0.199523] UDP hash table entries: 256 (order: 0, 4096 bytes)
[ 0.199554] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[ 0.199920] NET: Registered protocol family 1
[ 0.200225] NetWinder Floating Point Emulator V0.97 (double precision)
[ 0.202728] omap_dsp_init: 600000 bytes @ 9f200000
[ 0.243011] VFS: Disk quotas dquot_6.5.2
[ 0.243560] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.247009] msgmni has been set to 977
[ 0.249633] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.249664] io scheduler noop registered
[ 0.249664] io scheduler deadline registered
[ 0.249725] io scheduler cfq registered (default)
[ 0.264739] OMAP DSS rev 2.0
[ 0.268249] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.271179] omap_uart.0: ttyO0 at MMIO 0x4806a000 (irq = 72) is a OMAP UART0
[ 0.271759] omap_uart.1: ttyO1 at MMIO 0x4806c000 (irq = 73) is a OMAP UART1
[ 0.272308] omap_uart.2: ttyO2 at MMIO 0x49020000 (irq = 74) is a OMAP UART2
[ 0.289001] brd: module loaded
[ 0.297607] loop: module loaded
[ 0.297668] OMAP overclocker loaded.
[ 0.300811] omap2-nand driver initializing
[ 0.300994] NAND device: Manufacturer ID: 0x2c, Chip ID: 0xbc (Micron NAND 512MiB 1,8V 16-bit)
[ 0.301605] Creating 5 MTD partitions on "omap2-nand.0":
[ 0.301635] 0x000000000000-0x000000080000 : "xloader"
[ 0.302673] 0x000000080000-0x000000260000 : "uboot"
[ 0.303833] 0x000000260000-0x000000280000 : "uboot-env"
[ 0.304687] 0x000000280000-0x000000c80000 : "boot"
[ 0.307312] 0x000000c80000-0x000020000000 : "rootfs"
[ 0.398773] UBI: attaching mtd4 to ubi0
[ 0.398803] UBI: physical eraseblock size: 131072 bytes (128 KiB)
[ 0.398803] UBI: logical eraseblock size: 129024 bytes
[ 0.398834] UBI: smallest flash I/O unit: 2048
[ 0.398834] UBI: sub-page size: 512
[ 0.398864] UBI: VID header offset: 512 (aligned 512)
[ 0.398864] UBI: data offset: 2048
[ 1.497192] UBI: max. sequence number: 3186
[ 1.513458] UBI: attached mtd4 to ubi0
[ 1.513488] UBI: MTD device name: "rootfs"
[ 1.513519] UBI: MTD device size: 499 MiB
[ 1.513519] UBI: number of good PEBs: 3996
[ 1.513519] UBI: number of bad PEBs: 0
[ 1.513549] UBI: number of corrupted PEBs: 0
[ 1.513549] UBI: max. allowed volumes: 128
[ 1.513580] UBI: wear-leveling threshold: 4096
[ 1.513580] UBI: number of internal volumes: 1
[ 1.513610] UBI: number of user volumes: 1
[ 1.513610] UBI: available PEBs: 0
[ 1.513641] UBI: total number of reserved PEBs: 3996
[ 1.513641] UBI: number of PEBs reserved for bad PEB handling: 39
[ 1.513671] UBI: max/mean erase counter: 8/2
[ 1.513671] UBI: image sequence number: 1304342941
[ 1.513732] UBI: attaching mtd3 to ubi1
[ 1.513732] UBI: physical eraseblock size: 131072 bytes (128 KiB)
[ 1.513763] UBI: logical eraseblock size: 129024 bytes
[ 1.513763] UBI: smallest flash I/O unit: 2048
[ 1.513793] UBI: sub-page size: 512
[ 1.513793] UBI: VID header offset: 512 (aligned 512)
[ 1.513824] UBI: data offset: 2048
[ 1.514099] UBI: background thread "ubi_bgt0d" started, PID 553
[ 1.536132] UBI: max. sequence number: 479
[ 1.544860] UBI: attached mtd3 to ubi1
[ 1.544860] UBI: MTD device name: "boot"
[ 1.544891] UBI: MTD device size: 10 MiB
[ 1.544891] UBI: number of good PEBs: 80
[ 1.544921] UBI: number of bad PEBs: 0
[ 1.544921] UBI: number of corrupted PEBs: 0
[ 1.544921] UBI: max. allowed volumes: 128
[ 1.544952] UBI: wear-leveling threshold: 4096
[ 1.544952] UBI: number of internal volumes: 1
[ 1.544982] UBI: number of user volumes: 1
[ 1.544982] UBI: available PEBs: 0
[ 1.545013] UBI: total number of reserved PEBs: 80
[ 1.545013] UBI: number of PEBs reserved for bad PEB handling: 2
[ 1.545043] UBI: max/mean erase counter: 8/5
[ 1.545043] UBI: image sequence number: 2044990053
[ 1.545318] UBI: background thread "ubi_bgt1d" started, PID 556
[ 1.545440] usbcore: registered new interface driver libusual
[ 1.546295] mousedev: PS/2 mouse device common for all mice
[ 1.547058] input: keypad as /devices/platform/omap_i2c.1/i2c-1/1-004a/twl4030_keypad/input/input0
[ 1.550506] input: power-button as /devices/platform/omap_i2c.1/i2c-1/1-0049/twl4030_pwrbutton/input/input1
[ 1.551971] input: nub0 as /devices/platform/omap_i2c.3/i2c-3/3-0066/input/input2
[ 1.553680] input: nub1 as /devices/platform/omap_i2c.3/i2c-3/3-0067/input/input3
[ 1.558746] twl_rtc twl_rtc: rtc core: registered twl_rtc as rtc0
[ 1.559783] i2c /dev entries driver
[ 1.564819] bq27x00-battery 3-0055: support ver. 1.2.0 enabled
[ 1.588958] OMAP Watchdog Timer Rev 0x31: initial timeout 60 sec
[ 1.589508] twl4030_wdt twl4030_wdt: Failed to register misc device
[ 1.589569] twl4030_wdt: probe of twl4030_wdt failed with error -16
[ 1.590240] voltdm_scale: No voltage scale API registered for vdd_mpu_iva
[ 1.590270] platform mpu.0: omap_target: unable to scale voltage up.
[ 1.590728] cpuidle: using governor ladder
[ 1.590759] cpuidle: using governor menu
[ 1.820068] Registered led device: pandora::sd1
[ 1.820404] Registered led device: pandora::sd2
[ 1.820739] Registered led device: pandora::bluetooth
[ 1.821014] Registered led device: pandora::wifi
[ 1.822143] Registered led device: pandora::keypad_bl
[ 1.823028] Registered led device: pandora:
ower
[ 1.825469] Registered led device: pandora::charger
[ 1.826812] usbcore: registered new interface driver usbhid
[ 1.826843] usbhid: USB HID core driver
[ 1.829406] OMAP3 Pandora SoC init
[ 1.906005] asoc: twl4030-hifi <-> omap-mcbsp-dai.1 mapping ok
[ 1.907470] asoc: twl4030-hifi <-> omap-mcbsp-dai.3 mapping ok
[ 1.910461] ALSA device list:
[ 1.910461] #0: omap3pandora
[ 1.910675] TCP cubic registered
[ 1.910675] NET: Registered protocol family 17
[ 1.910766] NET: Registered protocol family 15
[ 1.910766] Registering the dns_resolver key type
[ 1.910858] VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 1
[ 1.910888] ThumbEE CPU extension supported.
[ 1.910919] Registering SWP/SWPB emulation handler
[ 1.918121] clock: disabling unused clocks to save power
[ 1.950317] Console: switching to colour frame buffer device 100x30
[ 2.130554] regulator_init_complete: VAUX4: incomplete constraints, leaving on
[ 2.133605] input: gpio-keys as /devices/platform/gpio-keys/input/input4
[ 2.135345] twl_rtc twl_rtc: setting system clock to 2012-06-25 09:01:52 UTC (1340614912)
[ 2.203308] UBIFS: mounted UBI device 0, volume 0, name "rootfs"
[ 2.203338] UBIFS: file system size: 508612608 bytes (496692 KiB, 485 MiB, 3942 LEBs)
[ 2.203369] UBIFS: journal size: 9033728 bytes (8822 KiB, 8 MiB, 71 LEBs)
[ 2.203399] UBIFS: media format: w4/r0 (latest is w4/r0)
[ 2.203399] UBIFS: default compressor: lzo
[ 2.203399] UBIFS: reserved for root: 0 bytes (0 KiB)
[ 2.204315] VFS: Mounted root (ubifs filesystem) on device 0:13.
[ 2.204895] devtmpfs: mounted
[ 2.205413] Freeing init memory: 192K
[ 2.288757] mmc0: host does not support reading read-only switch. assuming write-enable.
[ 2.291259] mmc0: new high speed SDHC card at address 0007
[ 2.293731] mmcblk0: mmc0:0007 SD04G 3.70 GiB
[ 2.297851] mmcblk0: p1
[ 2.576568] mmc1: host does not support reading read-only switch. assuming write-enable.
[ 2.578521] mmc1: new high speed SDHC card at address b368
[ 2.579742] mmcblk1: mmc1:b368 SMI 30.0 GiB
[ 2.583312] mmcblk1: unknown partition table
[ 2.682952] mmc2: card claims to support voltages below the defined range. These will be ignored.
[ 2.683990] mmc2: new SDIO card at address 0001
[ 3.256225] udev: starting version 151
[ 3.256927] udevd (708): /proc/708/oom_adj is deprecated, please use /proc/708/oom_score_adj instead.
[ 5.390045] alignment: ignoring faults is unsafe on this CPU. Defaulting to fixup mode.
[ 9.396179] ads7846 spi1.0: touchscreen, irq 254
[ 9.397186] input: touchscreen as /devices/platform/omap2_mcspi.1/spi_master/spi1/spi1.0/input/input5
[ 10.527038] fuse init (API version 7.17)
[ 10.708312] FAT-fs (mmcblk0): error, fat_get_cluster: invalid cluster chain (i_pos 0)
[ 10.708343] FAT-fs (mmcblk0): Filesystem has been set read-only
[ 10.819213] EXT2-fs (mmcblk1): warning: mounting unchecked fs, running e2fsck is recommended
[ 10.834533] FAT-fs (mmcblk0): error, fat_get_cluster: invalid cluster chain (i_pos 0)
[ 10.834564] FAT-fs (mmcblk0): Filesystem has been set read-only
[ 11.854431] NET: Registered protocol family 10
[ 13.108245] zram: module is from the staging directory, the quality is unknown, you have been warned.
[ 13.119995] zram: num_devices not specified. Using default: 1
[ 13.120025] zram: Creating 1 devices ...
[ 13.622436] UBIFS: mounted UBI device 1, volume 0, name "boot"
[ 13.622467] UBIFS: file system size: 8386560 bytes (8190 KiB, 7 MiB, 65 LEBs)
[ 13.622497] UBIFS: journal size: 1032193 bytes (1008 KiB, 0 MiB, 6 LEBs)
[ 13.622497] UBIFS: media format: w4/r0 (latest is w4/r0)
[ 13.622528] UBIFS: default compressor: lzo
[ 13.622528] UBIFS: reserved for root: 396117 bytes (386 KiB)
[ 14.241607] zram: disk size not provided. You can use disksize_kb module param to specify size.
[ 14.241638] Using default: (25% of RAM).
[ 14.242431] FAT-fs (zram0): bogus number of reserved sectors
[ 14.242462] FAT-fs (zram0): Can't find a valid FAT filesystem
[ 14.760620] platform mpu.0: max OPP set to 3
[ 14.777832] FAT-fs (zram0): bogus number of reserved sectors
[ 14.777862] FAT-fs (zram0): Can't find a valid FAT filesystem
[ 14.861236] input: nub0 as /devices/platform/omap_i2c.3/i2c-3/3-0066/input/input6
[ 14.951507] input: nub1 as /devices/platform/omap_i2c.3/i2c-3/3-0067/input/input7
[ 15.087463] Adding 125164k swap on /dev/zram0. Priority:5 extents:1 across:125164k SS
[ 19.713562] SGX clock rate 110 MHz
[ 20.630584] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 21.651214] ehci-omap ehci-omap.0: OMAP-EHCI Host Controller
[ 21.655059] ehci-omap ehci-omap.0: new USB bus registered, assigned bus number 1
[ 21.655914] ehci-omap ehci-omap.0: irq 77, io mem 0x48064800
[ 21.666961] ehci-omap ehci-omap.0: USB 2.0 started, EHCI 1.00
[ 21.667114] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 21.667144] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 21.667175] usb usb1: Product: OMAP-EHCI Host Controller
[ 21.667175] usb usb1: Manufacturer: Linux 3.2.17 ehci_hcd
[ 21.667205] usb usb1: SerialNumber: ehci-omap.0
[ 21.670440] hub 1-0:1.0: USB hub found
[ 21.670471] hub 1-0:1.0: 3 ports detected
[ 57.002380] Bluetooth: Core ver 2.16
[ 57.026428] NET: Registered protocol family 31
[ 57.026458] Bluetooth: HCI device and connection manager initialized
[ 57.026458] Bluetooth: HCI socket layer initialized
[ 57.026489] Bluetooth: L2CAP socket layer initialized
[ 57.034149] Bluetooth: SCO socket layer initialized
[ 76.143707] usb 1-2: new high-speed USB device number 2 using ehci-omap
[ 76.301544] usb 1-2: New USB device found, idVendor=0ace, idProduct=1215
[ 76.301574] usb 1-2: New USB device strings: Mfr=16, Product=32, SerialNumber=0
[ 76.301574] usb 1-2: Product: USB2.0 WLAN
[ 76.301605] usb 1-2: Manufacturer: ZyDAS
[ 76.600372] cfg80211: Calling CRDA to update world regulatory domain
[ 76.858886] usb 1-2: reset high-speed USB device number 2 using ehci-omap
[ 77.012084] ieee80211 phy0: Selected rate control algorithm 'pid'
[ 77.012969] zd1211rw 1-2:1.0: phy0
[ 77.013092] usbcore: registered new interface driver zd1211rw
[ 77.388732] udev: renamed network interface wlan0 to wlan1
[ 84.609100] keyboard: can't emulate rawmode for keycode 184
[ 84.738220] keyboard: can't emulate rawmode for keycode 184
[ 0.000000] CPU: ARMv7 Processor [411fc083] revision 3 (ARMv7), cr=10c5387d
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT nonaliasing instruction cache
[ 0.000000] Machine: Pandora Handheld Console
[ 0.000000] Reserving 8388608 bytes SDRAM for VRAM
[ 0.000000] Memory policy: ECC disabled, Data cache writeback
[ 0.000000] On node 0 totalpages: 127488
[ 0.000000] free_area_init_node: node 0, pgdat c04aa558, node_mem_map c04d0000
[ 0.000000] Normal zone: 1024 pages used for memmap
[ 0.000000] Normal zone: 0 pages reserved
[ 0.000000] Normal zone: 126464 pages, LIFO batch:31
[ 0.000000] OMAP3430/3530 ES3.1 (l2cache iva sgx neon isp )
[ 0.000000] Clocking rate (Crystal/Core/MPU): 26.0/332/500 MHz
[ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
[ 0.000000] pcpu-alloc: [0] 0
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 126464
[ 0.000000] Kernel command line: ubi.mtd=4 ubi.mtd=3 root=ubi0:rootfs rootfstype=ubifs rw rootflags=bulk_read vram=6272K omapfb.vram=0:3000K mmc_core.removable=0 quiet
[ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.000000] Memory: 498MB = 498MB total
[ 0.000000] Memory: 500492k/500492k available, 23796k reserved, 0K highmem
[ 0.000000] Virtual kernel memory layout:
[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
[ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
[ 0.000000] vmalloc : 0xe0800000 - 0xf8000000 ( 376 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xe0000000 ( 512 MB)
[ 0.000000] modules : 0xbf000000 - 0xc0000000 ( 16 MB)
[ 0.000000] .text : 0xc0008000 - 0xc043fcbc (4320 kB)
[ 0.000000] .init : 0xc0440000 - 0xc0470000 ( 192 kB)
[ 0.000000] .data : 0xc0470000 - 0xc04aac00 ( 235 kB)
[ 0.000000] .bss : 0xc04aac24 - 0xc04cfa24 ( 148 kB)
[ 0.000000] SLUB: Genslabs=11, HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[ 0.000000] NR_IRQS:410
[ 0.000000] IRQ: Found an INTC at 0xfa200000 (revision 4.0) with 96 interrupts
[ 0.000000] Total of 96 interrupts on 1 active controller
[ 0.000000] OMAP clockevent source: GPTIMER1 at 32768 Hz
[ 0.000000] sched_clock: 32 bits at 32kHz, resolution 30517ns, wraps every 131071999ms
[ 0.000000] Console: colour dummy device 80x30
[ 0.000000] console [tty0] enabled
[ 0.000244] Calibrating delay loop... 497.82 BogoMIPS (lpj=1941504)
[ 0.039093] pid_max: default: 32768 minimum: 301
[ 0.039489] Mount-cache hash table entries: 512
[ 0.040039] Initializing cgroup subsys devices
[ 0.040100] CPU: Testing write buffer coherency: ok
[ 0.040374] hw perfevents: enabled with ARMv7 Cortex-A8 PMU driver, 5 counters available
[ 0.041412] devtmpfs: initialized
[ 0.062652] print_constraints: dummy:
[ 0.063171] NET: Registered protocol family 16
[ 0.063629] GPMC revision 5.0
[ 0.068511] OMAP GPIO hardware version 2.5
[ 0.073272] omap_mux_init: Add partition: #1: core, flags: 0
[ 0.081756] Reprogramming SDRC clock to 332000000 Hz
[ 0.084808] hw-breakpoint: debug architecture 0x4 unsupported.
[ 0.094512] omap-mcbsp.2: alias fck already exists
[ 0.094940] omap-mcbsp.3: alias fck already exists
[ 0.096893] OMAP DMA hardware revision 4.0
[ 0.119323] bio: create slab <bio-0> at 0
[ 0.120971] print_constraints: vwlan: 1800 mV
[ 0.123168] SCSI subsystem initialized
[ 0.126586] usbcore: registered new interface driver usbfs
[ 0.126953] usbcore: registered new interface driver hub
[ 0.127288] usbcore: registered new device driver usb
[ 0.129150] omap_i2c omap_i2c.1: bus 1 rev1.3.12 at 2600 kHz
[ 0.133239] twl4030: PIH (irq 7) chaining IRQs 368..375
[ 0.133361] twl4030: power (irq 373) chaining IRQs 376..383
[ 0.134094] twl4030: gpio (irq 368) chaining IRQs 384..401
[ 0.134704] _omap_mux_init_gpio: Could not set gpio192
[ 0.136108] _omap_mux_init_gpio: Could not set gpio193
[ 0.139587] print_constraints: VUSB1V5: 1500 mV normal standby
[ 0.140441] print_constraints: VUSB1V8: 1800 mV normal standby
[ 0.141387] print_constraints: VUSB3V1: 3100 mV normal standby
[ 0.143341] twl4030_usb twl4030_usb: Initialized TWL4030 USB module
[ 0.145141] print_constraints: vdd_mpu_iva: 600 <--> 1450 mV normal
[ 0.145996] print_constraints: vdd_core: 600 <--> 1450 mV normal
[ 0.147003] print_constraints: VMMC1: 1850 <--> 3150 mV at 3150 mV normal standby
[ 0.147949] print_constraints: VDAC: 1800 mV normal standby
[ 0.148925] print_constraints: VAUX2: 1800 mV normal standby
[ 0.149841] print_constraints: VPLL2: 1800 mV normal standby
[ 0.150817] print_constraints: VMMC2: 1850 <--> 3150 mV at 3150 mV normal standby
[ 0.151794] print_constraints: VSIM: 2800 mV normal standby
[ 0.152709] print_constraints: VAUX1: 3000 mV normal standby
[ 0.153594] print_constraints: VAUX4: 2800 mV normal standby
[ 0.154266] omap_i2c omap_i2c.3: bus 3 rev1.3.12 at 100 kHz
[ 0.157775] Advanced Linux Sound Architecture Driver Version 1.0.24.
[ 0.158874] Switching to clocksource 32k_counter
[ 0.190765] musb-hdrc: version 6.0, ?dma?, otg (peripheral+host)
[ 0.196166] musb-hdrc: ConfigData=0xde (UTMI-8, dyn FIFOs, bulk combine, bulk split, HB-ISO Rx, HB-ISO Tx, SoftConn)
[ 0.196197] musb-hdrc: MHDRC RTL version 1.400
[ 0.196197] musb-hdrc: setup fifo_mode 4
[ 0.196228] musb-hdrc: 28/31 max ep, 16384/16384 memory
[ 0.196929] musb-hdrc musb-hdrc: USB OTG mode controller at fa0ab000 using DMA, IRQ 92
[ 0.197875] NET: Registered protocol family 2
[ 0.198150] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.198577] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.199127] TCP bind hash table entries: 16384 (order: 4, 65536 bytes)
[ 0.199462] TCP: Hash tables configured (established 16384 bind 16384)
[ 0.199493] TCP reno registered
[ 0.199523] UDP hash table entries: 256 (order: 0, 4096 bytes)
[ 0.199554] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[ 0.199920] NET: Registered protocol family 1
[ 0.200225] NetWinder Floating Point Emulator V0.97 (double precision)
[ 0.202728] omap_dsp_init: 600000 bytes @ 9f200000
[ 0.243011] VFS: Disk quotas dquot_6.5.2
[ 0.243560] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.247009] msgmni has been set to 977
[ 0.249633] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.249664] io scheduler noop registered
[ 0.249664] io scheduler deadline registered
[ 0.249725] io scheduler cfq registered (default)
[ 0.264739] OMAP DSS rev 2.0
[ 0.268249] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.271179] omap_uart.0: ttyO0 at MMIO 0x4806a000 (irq = 72) is a OMAP UART0
[ 0.271759] omap_uart.1: ttyO1 at MMIO 0x4806c000 (irq = 73) is a OMAP UART1
[ 0.272308] omap_uart.2: ttyO2 at MMIO 0x49020000 (irq = 74) is a OMAP UART2
[ 0.289001] brd: module loaded
[ 0.297607] loop: module loaded
[ 0.297668] OMAP overclocker loaded.
[ 0.300811] omap2-nand driver initializing
[ 0.300994] NAND device: Manufacturer ID: 0x2c, Chip ID: 0xbc (Micron NAND 512MiB 1,8V 16-bit)
[ 0.301605] Creating 5 MTD partitions on "omap2-nand.0":
[ 0.301635] 0x000000000000-0x000000080000 : "xloader"
[ 0.302673] 0x000000080000-0x000000260000 : "uboot"
[ 0.303833] 0x000000260000-0x000000280000 : "uboot-env"
[ 0.304687] 0x000000280000-0x000000c80000 : "boot"
[ 0.307312] 0x000000c80000-0x000020000000 : "rootfs"
[ 0.398773] UBI: attaching mtd4 to ubi0
[ 0.398803] UBI: physical eraseblock size: 131072 bytes (128 KiB)
[ 0.398803] UBI: logical eraseblock size: 129024 bytes
[ 0.398834] UBI: smallest flash I/O unit: 2048
[ 0.398834] UBI: sub-page size: 512
[ 0.398864] UBI: VID header offset: 512 (aligned 512)
[ 0.398864] UBI: data offset: 2048
[ 1.497192] UBI: max. sequence number: 3186
[ 1.513458] UBI: attached mtd4 to ubi0
[ 1.513488] UBI: MTD device name: "rootfs"
[ 1.513519] UBI: MTD device size: 499 MiB
[ 1.513519] UBI: number of good PEBs: 3996
[ 1.513519] UBI: number of bad PEBs: 0
[ 1.513549] UBI: number of corrupted PEBs: 0
[ 1.513549] UBI: max. allowed volumes: 128
[ 1.513580] UBI: wear-leveling threshold: 4096
[ 1.513580] UBI: number of internal volumes: 1
[ 1.513610] UBI: number of user volumes: 1
[ 1.513610] UBI: available PEBs: 0
[ 1.513641] UBI: total number of reserved PEBs: 3996
[ 1.513641] UBI: number of PEBs reserved for bad PEB handling: 39
[ 1.513671] UBI: max/mean erase counter: 8/2
[ 1.513671] UBI: image sequence number: 1304342941
[ 1.513732] UBI: attaching mtd3 to ubi1
[ 1.513732] UBI: physical eraseblock size: 131072 bytes (128 KiB)
[ 1.513763] UBI: logical eraseblock size: 129024 bytes
[ 1.513763] UBI: smallest flash I/O unit: 2048
[ 1.513793] UBI: sub-page size: 512
[ 1.513793] UBI: VID header offset: 512 (aligned 512)
[ 1.513824] UBI: data offset: 2048
[ 1.514099] UBI: background thread "ubi_bgt0d" started, PID 553
[ 1.536132] UBI: max. sequence number: 479
[ 1.544860] UBI: attached mtd3 to ubi1
[ 1.544860] UBI: MTD device name: "boot"
[ 1.544891] UBI: MTD device size: 10 MiB
[ 1.544891] UBI: number of good PEBs: 80
[ 1.544921] UBI: number of bad PEBs: 0
[ 1.544921] UBI: number of corrupted PEBs: 0
[ 1.544921] UBI: max. allowed volumes: 128
[ 1.544952] UBI: wear-leveling threshold: 4096
[ 1.544952] UBI: number of internal volumes: 1
[ 1.544982] UBI: number of user volumes: 1
[ 1.544982] UBI: available PEBs: 0
[ 1.545013] UBI: total number of reserved PEBs: 80
[ 1.545013] UBI: number of PEBs reserved for bad PEB handling: 2
[ 1.545043] UBI: max/mean erase counter: 8/5
[ 1.545043] UBI: image sequence number: 2044990053
[ 1.545318] UBI: background thread "ubi_bgt1d" started, PID 556
[ 1.545440] usbcore: registered new interface driver libusual
[ 1.546295] mousedev: PS/2 mouse device common for all mice
[ 1.547058] input: keypad as /devices/platform/omap_i2c.1/i2c-1/1-004a/twl4030_keypad/input/input0
[ 1.550506] input: power-button as /devices/platform/omap_i2c.1/i2c-1/1-0049/twl4030_pwrbutton/input/input1
[ 1.551971] input: nub0 as /devices/platform/omap_i2c.3/i2c-3/3-0066/input/input2
[ 1.553680] input: nub1 as /devices/platform/omap_i2c.3/i2c-3/3-0067/input/input3
[ 1.558746] twl_rtc twl_rtc: rtc core: registered twl_rtc as rtc0
[ 1.559783] i2c /dev entries driver
[ 1.564819] bq27x00-battery 3-0055: support ver. 1.2.0 enabled
[ 1.588958] OMAP Watchdog Timer Rev 0x31: initial timeout 60 sec
[ 1.589508] twl4030_wdt twl4030_wdt: Failed to register misc device
[ 1.589569] twl4030_wdt: probe of twl4030_wdt failed with error -16
[ 1.590240] voltdm_scale: No voltage scale API registered for vdd_mpu_iva
[ 1.590270] platform mpu.0: omap_target: unable to scale voltage up.
[ 1.590728] cpuidle: using governor ladder
[ 1.590759] cpuidle: using governor menu
[ 1.820068] Registered led device: pandora::sd1
[ 1.820404] Registered led device: pandora::sd2
[ 1.820739] Registered led device: pandora::bluetooth
[ 1.821014] Registered led device: pandora::wifi
[ 1.822143] Registered led device: pandora::keypad_bl
[ 1.823028] Registered led device: pandora:
ower[ 1.825469] Registered led device: pandora::charger
[ 1.826812] usbcore: registered new interface driver usbhid
[ 1.826843] usbhid: USB HID core driver
[ 1.829406] OMAP3 Pandora SoC init
[ 1.906005] asoc: twl4030-hifi <-> omap-mcbsp-dai.1 mapping ok
[ 1.907470] asoc: twl4030-hifi <-> omap-mcbsp-dai.3 mapping ok
[ 1.910461] ALSA device list:
[ 1.910461] #0: omap3pandora
[ 1.910675] TCP cubic registered
[ 1.910675] NET: Registered protocol family 17
[ 1.910766] NET: Registered protocol family 15
[ 1.910766] Registering the dns_resolver key type
[ 1.910858] VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 1
[ 1.910888] ThumbEE CPU extension supported.
[ 1.910919] Registering SWP/SWPB emulation handler
[ 1.918121] clock: disabling unused clocks to save power
[ 1.950317] Console: switching to colour frame buffer device 100x30
[ 2.130554] regulator_init_complete: VAUX4: incomplete constraints, leaving on
[ 2.133605] input: gpio-keys as /devices/platform/gpio-keys/input/input4
[ 2.135345] twl_rtc twl_rtc: setting system clock to 2012-06-25 09:01:52 UTC (1340614912)
[ 2.203308] UBIFS: mounted UBI device 0, volume 0, name "rootfs"
[ 2.203338] UBIFS: file system size: 508612608 bytes (496692 KiB, 485 MiB, 3942 LEBs)
[ 2.203369] UBIFS: journal size: 9033728 bytes (8822 KiB, 8 MiB, 71 LEBs)
[ 2.203399] UBIFS: media format: w4/r0 (latest is w4/r0)
[ 2.203399] UBIFS: default compressor: lzo
[ 2.203399] UBIFS: reserved for root: 0 bytes (0 KiB)
[ 2.204315] VFS: Mounted root (ubifs filesystem) on device 0:13.
[ 2.204895] devtmpfs: mounted
[ 2.205413] Freeing init memory: 192K
[ 2.288757] mmc0: host does not support reading read-only switch. assuming write-enable.
[ 2.291259] mmc0: new high speed SDHC card at address 0007
[ 2.293731] mmcblk0: mmc0:0007 SD04G 3.70 GiB
[ 2.297851] mmcblk0: p1
[ 2.576568] mmc1: host does not support reading read-only switch. assuming write-enable.
[ 2.578521] mmc1: new high speed SDHC card at address b368
[ 2.579742] mmcblk1: mmc1:b368 SMI 30.0 GiB
[ 2.583312] mmcblk1: unknown partition table
[ 2.682952] mmc2: card claims to support voltages below the defined range. These will be ignored.
[ 2.683990] mmc2: new SDIO card at address 0001
[ 3.256225] udev: starting version 151
[ 3.256927] udevd (708): /proc/708/oom_adj is deprecated, please use /proc/708/oom_score_adj instead.
[ 5.390045] alignment: ignoring faults is unsafe on this CPU. Defaulting to fixup mode.
[ 9.396179] ads7846 spi1.0: touchscreen, irq 254
[ 9.397186] input: touchscreen as /devices/platform/omap2_mcspi.1/spi_master/spi1/spi1.0/input/input5
[ 10.527038] fuse init (API version 7.17)
[ 10.708312] FAT-fs (mmcblk0): error, fat_get_cluster: invalid cluster chain (i_pos 0)
[ 10.708343] FAT-fs (mmcblk0): Filesystem has been set read-only
[ 10.819213] EXT2-fs (mmcblk1): warning: mounting unchecked fs, running e2fsck is recommended
[ 10.834533] FAT-fs (mmcblk0): error, fat_get_cluster: invalid cluster chain (i_pos 0)
[ 10.834564] FAT-fs (mmcblk0): Filesystem has been set read-only
[ 11.854431] NET: Registered protocol family 10
[ 13.108245] zram: module is from the staging directory, the quality is unknown, you have been warned.
[ 13.119995] zram: num_devices not specified. Using default: 1
[ 13.120025] zram: Creating 1 devices ...
[ 13.622436] UBIFS: mounted UBI device 1, volume 0, name "boot"
[ 13.622467] UBIFS: file system size: 8386560 bytes (8190 KiB, 7 MiB, 65 LEBs)
[ 13.622497] UBIFS: journal size: 1032193 bytes (1008 KiB, 0 MiB, 6 LEBs)
[ 13.622497] UBIFS: media format: w4/r0 (latest is w4/r0)
[ 13.622528] UBIFS: default compressor: lzo
[ 13.622528] UBIFS: reserved for root: 396117 bytes (386 KiB)
[ 14.241607] zram: disk size not provided. You can use disksize_kb module param to specify size.
[ 14.241638] Using default: (25% of RAM).
[ 14.242431] FAT-fs (zram0): bogus number of reserved sectors
[ 14.242462] FAT-fs (zram0): Can't find a valid FAT filesystem
[ 14.760620] platform mpu.0: max OPP set to 3
[ 14.777832] FAT-fs (zram0): bogus number of reserved sectors
[ 14.777862] FAT-fs (zram0): Can't find a valid FAT filesystem
[ 14.861236] input: nub0 as /devices/platform/omap_i2c.3/i2c-3/3-0066/input/input6
[ 14.951507] input: nub1 as /devices/platform/omap_i2c.3/i2c-3/3-0067/input/input7
[ 15.087463] Adding 125164k swap on /dev/zram0. Priority:5 extents:1 across:125164k SS
[ 19.713562] SGX clock rate 110 MHz
[ 20.630584] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 21.651214] ehci-omap ehci-omap.0: OMAP-EHCI Host Controller
[ 21.655059] ehci-omap ehci-omap.0: new USB bus registered, assigned bus number 1
[ 21.655914] ehci-omap ehci-omap.0: irq 77, io mem 0x48064800
[ 21.666961] ehci-omap ehci-omap.0: USB 2.0 started, EHCI 1.00
[ 21.667114] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 21.667144] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 21.667175] usb usb1: Product: OMAP-EHCI Host Controller
[ 21.667175] usb usb1: Manufacturer: Linux 3.2.17 ehci_hcd
[ 21.667205] usb usb1: SerialNumber: ehci-omap.0
[ 21.670440] hub 1-0:1.0: USB hub found
[ 21.670471] hub 1-0:1.0: 3 ports detected
[ 57.002380] Bluetooth: Core ver 2.16
[ 57.026428] NET: Registered protocol family 31
[ 57.026458] Bluetooth: HCI device and connection manager initialized
[ 57.026458] Bluetooth: HCI socket layer initialized
[ 57.026489] Bluetooth: L2CAP socket layer initialized
[ 57.034149] Bluetooth: SCO socket layer initialized
[ 76.143707] usb 1-2: new high-speed USB device number 2 using ehci-omap
[ 76.301544] usb 1-2: New USB device found, idVendor=0ace, idProduct=1215
[ 76.301574] usb 1-2: New USB device strings: Mfr=16, Product=32, SerialNumber=0
[ 76.301574] usb 1-2: Product: USB2.0 WLAN
[ 76.301605] usb 1-2: Manufacturer: ZyDAS
[ 76.600372] cfg80211: Calling CRDA to update world regulatory domain
[ 76.858886] usb 1-2: reset high-speed USB device number 2 using ehci-omap
[ 77.012084] ieee80211 phy0: Selected rate control algorithm 'pid'
[ 77.012969] zd1211rw 1-2:1.0: phy0
[ 77.013092] usbcore: registered new interface driver zd1211rw
[ 77.388732] udev: renamed network interface wlan0 to wlan1
[ 84.609100] keyboard: can't emulate rawmode for keycode 184
[ 84.738220] keyboard: can't emulate rawmode for keycode 184
Last edited by a moderator:
