Hmmm, still not working. re-downloaded - I tried on two SD cards, and used 'remove device' this time. Didn't try that initially.Simon Parzer said:Sounds weird, especially as the game, as well as the beta version worked for almost everybody.
I'd say, redownload and reinstall (delete it from your SD card before that). Don't forget to "remove device" under Windows before plugging whatever you use to write to the SD out.
Then report back if it still won't work.
ingrin said:Hmmm, still not working. re-downloaded - I tried on two SD cards, and used 'remove device' this time. Didn't try that initially.Simon Parzer said:Sounds weird, especially as the game, as well as the beta version worked for almost everybody.
I'd say, redownload and reinstall (delete it from your SD card before that). Don't forget to "remove device" under Windows before plugging whatever you use to write to the SD out.
Then report back if it still won't work.
Cards are formatted FAT32. Firmware version 2.0, not sure what the issue might be. I dropped my GP2X a couple months ago (knocked the joystick shaft through the top of my DaveC Cap) and haven't messed around with it much since then. Something may be wrong with the machine, as it seems to do the loading screen freeze about 30% of the time now. Checked other games and they run though... Ohh well, I wouldn't worry about it if no one else reports a problem. I'll keep fiddling and see if I can resolve. I'm very angious to play as it sounds like a superlative port!
Maybe you have to install SDL libs on your gp2x. Check the archive for that :
http://archive.gp2x.de/cgi-bin/cfiles.cgi?0,0,0,0,31,869
I got that key allready and opened the power room with it. So i guess i need to find a other key somewhereDraken said:Talk to the guy behind the hole. He'll give you a key. Then go to all the way to the right and try to get up to the building there, that's where the gum is.(just press the jump button when the air pushes you, you'll see what I mean when you're there)
Simon Parzer said:http://simonparzer.kilu.de/gp2oukutsu-b1.tar.gz
I'll see if there are any differences in the data folder, maybe that's the reason.. EDIT: nope, the data folder is the same.
Upgrading from beta to 1.00: delete the two .gpe files and copy doukutsu, doukutsu.gpe, doukutsu-sw and doukutsu-sw.gpe in place. If you want to be able to change the buttons, copy gp2x_buttons.txt, too.
Thanks! Beta works (and works wonderfully!) I will look into copying the 1.00 gpe files over later today as well. I might also try to install the SDL libs although I'm fairly certain I did that last year.