Todespreis Member Joined Jun 16, 2021 Messages 93 Oct 14, 2021 #1 Found that video on YouTube: How did he do that? I messaged him on YouTube, but he does not answer.
H hmn Member Joined Mar 8, 2010 Messages 226 Oct 15, 2021 #2 He uses the UART on the EXT port with a breakout cable and USB adapter. See also the "Unbrick your Wiz" document (https://pyra-handheld.com/boards/resources/wiz-unbrick-pack.3002/). You can also add a serial console to your Wiz with the stock USB cable by installing the USB serial driver for it and running getty (that does not give you access to the boot process however). See here: https://pyra-handheld.com/boards/threads/howto-usb-serial-shell-with-stock-usb-cable.47287/ , https://pyra-handheld.com/boards/resources/usb-serial-out-for-wiz.2992/). Note that the kernel module g_serial.ko needs to match the firmware version.
He uses the UART on the EXT port with a breakout cable and USB adapter. See also the "Unbrick your Wiz" document (https://pyra-handheld.com/boards/resources/wiz-unbrick-pack.3002/). You can also add a serial console to your Wiz with the stock USB cable by installing the USB serial driver for it and running getty (that does not give you access to the boot process however). See here: https://pyra-handheld.com/boards/threads/howto-usb-serial-shell-with-stock-usb-cable.47287/ , https://pyra-handheld.com/boards/resources/usb-serial-out-for-wiz.2992/). Note that the kernel module g_serial.ko needs to match the firmware version.
Todespreis Member Joined Jun 16, 2021 Messages 93 Oct 15, 2021 #3 Thank you for the reply. I will try it out ^^ Post automatically merged: Oct 15, 2021 Do this things only work with wiz? Or can i try em out on a gp2x, too?
Thank you for the reply. I will try it out ^^ Post automatically merged: Oct 15, 2021 Do this things only work with wiz? Or can i try em out on a gp2x, too?
H hmn Member Joined Mar 8, 2010 Messages 226 Oct 16, 2021 #4 The stuff I have linked to is specific to the Wiz, but there should be an equivalent solution for the GP2X as well.
The stuff I have linked to is specific to the Wiz, but there should be an equivalent solution for the GP2X as well.