OK! Here they are! This is the battery I have gotten a few board and many PM requests about since I announced I had them...
I ran a pair of them down in a flashlight 5 times then ran this program twice(7 charges/discharges). They were almost the same actually...
GPX-GP2X-F100( B ) MKII
Firmware 2.0.0
Blank 512MB SD card (Not running GMenu or anything if it makes a difference)
Energizer 2500mAh charger
Clock Speed: 200MHz
File writes: 5 minutes
---------------------------------
RUN ONE(last night):
STATISTICS:
Clock Speed: 200 Mhz
Running Time: 3:55:00
Average FPS: 82.16
Current charge: 34%
Initial internal charge: 906
Current internal charge: 722
---------------------------------
RUN TWO(just finished now):
STATISTICS:
Clock Speed: 200 Mhz
Running Time: 3:50:00
Average FPS: 81.32
Current charge: 45%
Initial internal charge: 911
Current internal charge: 719
---------------------------------
I started watching it drop like a stone last night at about 3:46:19 from 92% to 13%(3:58:42) then got the white scanlines for a few seconds to a pure white screen with one black bar across it for another few seconds to ... dead. The battery level meter seems like it might not be calibrated? Anyway there's the results.
On a side note I sadly found my GP2X won't run at 245MHz(in this program at least) for longer than 2:00 or so. Best I could maintain was 233MHz. Bleh... :blink: :blink: :blink: :blink: :blink: :blink:
Edit: Added the charger.
Edit 2: Added a 3rd run below.
---------------------------------
RUN THREE(ran before I went to work):
STATISTICS:
Clock Speed: 200 Mhz
Running Time: 3:55:00
Average FPS: 81.15
Current charge: 5%
Initial internal charge: 979
Current internal charge: 669
---------------------------------