Basic Open2x Questions
- Thread starter zakhooi
- Start date
norm
aka kapakux89
yay! 
good luck with the move etc.
good luck with the move etc.
Orkie
Super Duper Mega GP Mania
I certainly wouldn't expect anybody to assemble the firmware themselves given how much of a pain some of it has been to put together .
.tabris
Still Fresh
will there be news on the open2x website when the DR4 f200 version is released?
sam fisher
Well-Known Member
I imagine there will be a post here!
Edit: Oh wait, DR4. That won't be posted here. RC1 will be posted here.
Edit: Oh wait, DR4. That won't be posted here. RC1 will be posted here.
Any news?
according to http://www.open2x.org/open2x/index.html DR4 is ready for F100 and soon for F200
Anyone tried it yet?
according to http://www.open2x.org/open2x/index.html DR4 is ready for F100 and soon for F200
Anyone tried it yet?
gruso
thunderbox
+1.
I'd love to get a solid month of The Open2x Experience in before Pandora arrives.
I'd love to get a solid month of The Open2x Experience in before Pandora arrives.
I got the DR4 open2x from orkie. But where should I send bug reports? IRC doesn't seem appropriate cause I don't know if its been reported before.
Anyway here are some problems I had:
1) As pointed out by Orkie, mp3 stutters. I need to play mine at 250MHz so that it doesn't
2) screen shifts sometimes, happens during mplayer and also gmenu2x
3) TV-out shows double image (two overlapped images) (The image becomes one if you run something else and quit back to gmenu2x, but screen is cropped)
4) TV-out does not switch back to LCD
5) if i try to chroot to lenny debian on reiserfs /dev/sda1, I get a FATAL:kernel too old. (I'll try etch instead edit: etch with ext2 works)
6) /etc/mtab has huge number of entries - are they necessary?
7) The issue of multiple network interfaces showing up whenever the device is rebooted/power-cycled is due to the g_ether driver randomly setting the host and device mac addresses. This problem is remedied by passing the same host and device mac addresses during the modprobe of g_ether. For example: modprobe g_ether host_addr=46:0d:9e:67:69:eb dev_addr=46:0d:9e:67:69:ec
8) can't ftp to gp2x (ps shows bftpd -d is running, everytime I try to ftp, ps shows a new process [bftpd] is setup) EDIT: ftp://root@192.168.2.2 works
9) gateway not set (need to do: route add default gw 192.168.2.1 usb0 - put this i Ousbnet)
10) dns (ping: bad address 'www.google.com') even after modifying resolv.conf
11) no samba server?
Basilisk2 seems to work well compiled with dynamic libs. external USB mouse and keyboard works as well.
Anyway here are some problems I had:
1) As pointed out by Orkie, mp3 stutters. I need to play mine at 250MHz so that it doesn't
2) screen shifts sometimes, happens during mplayer and also gmenu2x
3) TV-out shows double image (two overlapped images) (The image becomes one if you run something else and quit back to gmenu2x, but screen is cropped)
4) TV-out does not switch back to LCD
5) if i try to chroot to lenny debian on reiserfs /dev/sda1, I get a FATAL:kernel too old. (I'll try etch instead edit: etch with ext2 works)
6) /etc/mtab has huge number of entries - are they necessary?
7) The issue of multiple network interfaces showing up whenever the device is rebooted/power-cycled is due to the g_ether driver randomly setting the host and device mac addresses. This problem is remedied by passing the same host and device mac addresses during the modprobe of g_ether. For example: modprobe g_ether host_addr=46:0d:9e:67:69:eb dev_addr=46:0d:9e:67:69:ec
8) can't ftp to gp2x (ps shows bftpd -d is running, everytime I try to ftp, ps shows a new process [bftpd] is setup) EDIT: ftp://root@192.168.2.2 works
9) gateway not set (need to do: route add default gw 192.168.2.1 usb0 - put this i Ousbnet)
10) dns (ping: bad address 'www.google.com') even after modifying resolv.conf
11) no samba server?
Basilisk2 seems to work well compiled with dynamic libs. external USB mouse and keyboard works as well.
