skeezix
Internal Development
Get it off the website:
http://www.codejedi.com/shadowplan/gp32.html
Release 13.0
------------
NEW: Added new menu item to Configuration submenu; Adjust Clock Speed. You can
now set the GP32 clock to 66, 99, 132, 150, 156, 160 or 166MHz. Everyone can
run up to 132MHz, and hopefully you can get to 156 or so; some can run at
166MHz (including me!
. Your battery performance goes down the crapper
though at that speed, but you can turn your framerate way down.
o NOTE: Everything is very carefully cycle counted here.. including sound
processing to the ST main CPU; so if you clock up and the emu is running
mega fast, then sound will be higher pitched; so you can decrease frameskip
until its just right. If setting frameskip to 0 and its still too fast, it
means you're clocking too high so you might as well clock down a little
to get it right and save some battery power.
o NOTE: Now I need to add throttling code so that even if you clock too high
it'll run the right speed; for now, you can fiddle with your clock and
frameskip to get it right
o NOTE: Most people probably do not need to run at 166.. Castaway/GP is
already pretty fast!
o NOTE: Don't blame us if you pop your unit, though evidence would suggest
the worst that can happen is your unit crashes; just turn it off and you're
good to go
o Thanks [SoD]Thor! (Thor got me through a brief brainlapse
http://www.codejedi.com/shadowplan/gp32.html
Release 13.0
------------
NEW: Added new menu item to Configuration submenu; Adjust Clock Speed. You can
now set the GP32 clock to 66, 99, 132, 150, 156, 160 or 166MHz. Everyone can
run up to 132MHz, and hopefully you can get to 156 or so; some can run at
166MHz (including me!
though at that speed, but you can turn your framerate way down.
o NOTE: Everything is very carefully cycle counted here.. including sound
processing to the ST main CPU; so if you clock up and the emu is running
mega fast, then sound will be higher pitched; so you can decrease frameskip
until its just right. If setting frameskip to 0 and its still too fast, it
means you're clocking too high so you might as well clock down a little
to get it right and save some battery power.
o NOTE: Now I need to add throttling code so that even if you clock too high
it'll run the right speed; for now, you can fiddle with your clock and
frameskip to get it right
o NOTE: Most people probably do not need to run at 166.. Castaway/GP is
already pretty fast!
o NOTE: Don't blame us if you pop your unit, though evidence would suggest
the worst that can happen is your unit crashes; just turn it off and you're
good to go
o Thanks [SoD]Thor! (Thor got me through a brief brainlapse