Hardware Mapping - Pyra Wiki

Revision as of 21:14, 30 March 2016 by PooSlice (talk | contribs) (Created page with "= Mapping of hardware interfaces of the OMAP = == UARTs == UART1 = n/a UART2 = Bluetooth (with RTS/CTS) UART3 = Console (FTDI) UART4 = n/a UART5 = n/a == MMCs ==...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

Mapping of hardware interfaces of the OMAP

UARTs

 UART1 = n/a
 UART2 = Bluetooth (with RTS/CTS)
 UART3 = Console (FTDI)
 UART4 = n/a
 UART5 = n/a

MMCs

 MMC1 (sdcard @ 0x4809c000) = left SD slot (4 bit, "MMC2", mmc2-vdd)
 MMC2 (emmc @ 0x480b4000) = eMMC/µSD (8/4 bit, "EMMC", mmc1-vdd)
 MMC3 (wlsdio @ 0x480ad000) = WL183x SDIO for WLAN
 MMC4 (sdio4 @ 0x480d1000) = right SD slot (4 bit, "MMC3", ldo2)
 MMC5 (sdio5 @ 0x480d5000) =n/a (OMAP5430 only)

I2Cs

 I2C1 (0x48070000) = CPU (CPU board only)
 I2C2 (0x48072000) = Peripheral (Mainboard)
 I2C3 (0x48060000) = Sensor (Mainboard)
 I2C4 (0x4807a000) = Display (Displayboard)
 I2C5 (0x4807c000) = System (Mainboard) 

add table here with chips and addresses

USB HSIC2

 USB1 = left USB Host
 USB2 = right USB Host
 USB3 = WWAN

GPIOs

add table here with exact function, pinmux modes, connector pin numbers

Back
Top