Viranimus
Still Fresh
- Joined
- Nov 16, 2010
- Messages
- 14
Hello.
I just got my Caanoo and after fighting with it for 8 hours last night to get emulators working on it, I managed to get GPSP working flawlessly and the NES emulator working albeit slow and buggy.
I cannot however get Snes9xC working. Ill try to be as specific as possible and I would appreciate any help that can be given.
First and foremost, while I dont know everything, I am at least reasonably capable of doing this. I have ran an A320 for the last year now with little or no issues outside of the device itself. I also spent a large bulk of the 8 hours last night working on this, reading various sources between here, and open consoles website. Ive searched FAQs and manually scanned relevant documents, Ive read the Readme file as well and have yet to hear mention of this specific issue.
I am running base firmware at the moment. I somewhat regret loading everything up to my SDHC card before doing the firmware upgrade, but once I get the base files in place upgrading firmware shouldnt be a problem once i have a SD (non HC) card)
Now here is the issue. Ive been hammering my head against a wall trying to get Snes9xC to work. On only one occasion have I gotten the blue load screen for it, but when I did, There was no menus or text, just a blank page. Ive since tried other options to no avail. Now I can get the Caanoo to recognize the emulator, but all it does is goes to a load screen (black top, white UI bottom) and then after about 4 seconds it goes back to the main menus.
Ive tried to install it to the games folder (the snes folder + config file) (EDIT: Ive tried running it from the explorer menu system) Ive tried to install both files directly to the card inside no file. Ive tried creating a subfolder in games folder to install it there. Ive tried "*you have to adjust the Snes9x4C_Net.gpu and rename to Snes9x4C.gpu" as mentioned in the read me. Ive tried a delete and reinstall. Ive tried to run it as the zipped file. Ive tried to install it from direct extraction. I have basically ran out of ideas on what else to do here.
After trying all these things, ive not once seen a blue screen outside of the one blank fluke to which I cannot recall what I had done to get it and now I seemingly cant even replicate that.
This was the first thing I wanted installed and this is the last major hurdle to work through, outside of waiting for psx/n64/saturn emus
Anyway, I thank you for reading this, and In advance I appreciate any assistance or guidance that might be rendered.
I just got my Caanoo and after fighting with it for 8 hours last night to get emulators working on it, I managed to get GPSP working flawlessly and the NES emulator working albeit slow and buggy.
I cannot however get Snes9xC working. Ill try to be as specific as possible and I would appreciate any help that can be given.
First and foremost, while I dont know everything, I am at least reasonably capable of doing this. I have ran an A320 for the last year now with little or no issues outside of the device itself. I also spent a large bulk of the 8 hours last night working on this, reading various sources between here, and open consoles website. Ive searched FAQs and manually scanned relevant documents, Ive read the Readme file as well and have yet to hear mention of this specific issue.
I am running base firmware at the moment. I somewhat regret loading everything up to my SDHC card before doing the firmware upgrade, but once I get the base files in place upgrading firmware shouldnt be a problem once i have a SD (non HC) card)
Now here is the issue. Ive been hammering my head against a wall trying to get Snes9xC to work. On only one occasion have I gotten the blue load screen for it, but when I did, There was no menus or text, just a blank page. Ive since tried other options to no avail. Now I can get the Caanoo to recognize the emulator, but all it does is goes to a load screen (black top, white UI bottom) and then after about 4 seconds it goes back to the main menus.
Ive tried to install it to the games folder (the snes folder + config file) (EDIT: Ive tried running it from the explorer menu system) Ive tried to install both files directly to the card inside no file. Ive tried creating a subfolder in games folder to install it there. Ive tried "*you have to adjust the Snes9x4C_Net.gpu and rename to Snes9x4C.gpu" as mentioned in the read me. Ive tried a delete and reinstall. Ive tried to run it as the zipped file. Ive tried to install it from direct extraction. I have basically ran out of ideas on what else to do here.
After trying all these things, ive not once seen a blue screen outside of the one blank fluke to which I cannot recall what I had done to get it and now I seemingly cant even replicate that.
This was the first thing I wanted installed and this is the last major hurdle to work through, outside of waiting for psx/n64/saturn emus
Anyway, I thank you for reading this, and In advance I appreciate any assistance or guidance that might be rendered.