Hello!
I built my Custom Linux Kernel (3.2.69) with the config from /proc/config.gz and some small changes (like md, and boot time raid autodetect). When I boot it, the two raid Partitions from the SD Cards don't get detected, and i think its because the SD Cards are detected after the raid autodetect:
		
		
	
	
Is there a way to delay the raid autodetect? Or another trick to get it to work?
Also when I specify the md raid in the boot parameters(md=0,/dev/mmcblk0p2,/dev/mmcblk1p2) it complains about "unknown device: mmcblk0p2" and i also think its because the problem of above.
				
			I built my Custom Linux Kernel (3.2.69) with the config from /proc/config.gz and some small changes (like md, and boot time raid autodetect). When I boot it, the two raid Partitions from the SD Cards don't get detected, and i think its because the SD Cards are detected after the raid autodetect:

Is there a way to delay the raid autodetect? Or another trick to get it to work?
Also when I specify the md raid in the boot parameters(md=0,/dev/mmcblk0p2,/dev/mmcblk1p2) it complains about "unknown device: mmcblk0p2" and i also think its because the problem of above.
			
				Last edited by a moderator: 
			
		
	
								
								
									
	
								
							
							 
	
 
 
		 
 
		 
 
		 
 
		 
 
		 
 
		 
 
		