Entware Registration

[sPazz livewire]

Okay, here's the deal. I want to download GPcinema from JoyGP but you need to register for that. But the site states the following that Entware games and apps don't support Pacrom and that I need to change firmware which I'm not planning on doing. Does this mean I just can't download it with pacrom and that I have to go to the official firmware to download and play it or does this plain mean I can forget about GPcinema alltogether just because I have pacrom installed?

 

[Evil_Cartman]

if your lucky it will _work_ with pacrom but not optimal

 

[sPazz livewire]

Is there any risk attached to it?

 

[DoberMann]

It doesnt work with pacrom at my gp32.
I or you have to use other firmwares. I installed Aquafish multifirmware 3.1b and it works fine with the new euro-firmware!

 

[Evil_Cartman]

well it works with my GP but crashes sometimes.

 

[don]

Your information is a bit incomplete here. I understand you are using pacrom. Are you using pacrom
via mfw2? You can select the original fw by pressing select while turning on the GP32. And, if you
use the link mode provided by the original fw while registering your GP32 at entware, you will be able
to buy GpCinema. You'll need to start GpCinema via the original fw though. It's not too comfortable,
but it's working and does not need another bios flashed.

 

[sPazz livewire]

Your information is a bit incomplete here. I understand you are using pacrom. Are you using pacrom
via mfw2? You can select the original fw by pressing select while turning on the GP32. And, if you
use the link mode provided by the original fw while registering your GP32 at entware, you will be able
to buy GpCinema. You'll need to start GpCinema via the original fw though. It's not too comfortable,
but it's working and does not need another bios flashed.

That's what I wanted to know. Thanks.