My Comp Wont Detect "a New Usb Device"


Then after downloading you right click on "gp32usb.inf" and choose "install"

And if it still doesn't work it's because you have the wrong firmware because few of them have link that doesn't work properly. :)
 
IS NOBODY LISTENING!!!!! MY COMPUTER DUSN'T DETECT MY GP @ ALL THEREFORE IT DON'T ASK 2 INSTALL DRIVERS!!!!!!!!!
You don't care about detecting automatically...

Install yourself the drivers right clicking on "gp32usb.inf" and doing "install"

Do what I told you and it should work! :)
 
What FW do you have on? Multifirmware or the original?
It could possibly be a faulty wire. Where did you get your GP32 from, if it is GBAX, they will probably replace it.
If all else fails you could get a seperate SMC reader.
Have a search around the forum, there could be some old threads of people who had the same problem.
 
Could it possibly be that you are just connecting your GP32 to your PC and expect it to work? I suspect that since your first post, and I have to tell you that it does not work. First, you need the PC Link program, then install the Freelauncher. After you have done that, you can download GPDrive and install it on your GP32 via PC Link. Then, when you execute GPDrive, it works just like you want it to ;) Hell, my GP ist connected right now, and GPDrive is running, busily copying Manga onto my SMC :D
 
Stating the obvious here but search the forum read the faq's etc every thing you need is here, the usb can be a bit funky but you'll get it done faster by searching than waiting for people to reply.

Get free launcher from the Gamepark web site along with everything else you need here

install the usb drivers asap, without them you can't do much more than play bought smc games. Windows will not recognise the gp, you have to manually install the drivers.
 
If you are a beginner,
Follow this step to use GP32 application!
Sign Up

Download & Install GP32 Authentication Wizard

Download USB Driver

Connection GP32 - PC

Installation of USB Driver

Execute GP32 Authentication Wizard

Insert website ID & Password, Click registration

Authentication of your GP32 is Complete!

Download & Install PC Link Host application
to use all kinds of applications

Thats what you need to do, if the usb isn't detecting perhaps you could write step by step exactley what your doing and we could point you in the correct direction. When do you plug the usb into the GP, when do you turn the GP on etc?
 
i found sum fing in anuva thread dat tld me 2 go 2 pclink mode THEN connect 2 GP, this made to be detected, and installed, but the autherisation thing still says "can't open your usb port" no matter wen i turn it on and connect it
 
Back
Top