flash issue

[delicator]

hello everybody


I try to flash with finazaxxon


I try to download for 2 sources, and multiple times


I try with 3 sd card


Now, i'm trying to format with windows7 my 32go Kingston to try again


I'v ubuntu, i try with windows because i'm desperate


When I boot from sd1, it's say booting the kernel, screen goes black, and nothing else...


Any suggestion ?


It's very urgent !


thanks a lot

 

[delicator]

try with 32go kingston formatted with win7 to fat32 and it's the same, i say booting kernel and screen is black and nothing


please help

 

[mcobit]

Wasn't there a problem with the checksum of the latest image?

 

[delicator]

yes I try again...


I reboot my pandora, and I see, first boot ... and, starting udev.. and nothing more


I try in this moment with my last sd card, fat32, and checksum ok


It's say booting kernel and no screen, so i can't see when it's time to push enter...


but, the sd card led, is flashing, so i'm having some hope


I let you know


if you have some ideas

 

[mcobit]

Set the brightness up with the keycombination? Can you see something on the screen if you look really closely or when shining some light on it?

 

[delicator]

i try but, it's not a backlight issue if it is the question i try with led light on it


when I restart the pandora, i've the logo and the boot menu, and the screen look's good


For now, the sd card led do nothing, and the screen is light on but nothing on it...


I try to push enter, but nothing append


What is the usual time for flashing ? before the reboot ?

 

[delicator]

have you an old release of the saxxon ?

 

[delicator]

My last idea of the night, I try with sdformatter to format my sdcard


and, same, It say's reading boot.src, some stuff, and booting kernel, the screen goes black, and it's over, nothing append more...


I try all my ideas...

 

[delicator]

My update.log for my last try


[ 0.000000] Linux version 3.2.16-00257-g22711aa (notaz@pixelinis) (gcc version 4.3.3 (Sourcery G++ Lite 2009q1-203) ) #604 Sun Apr 29 20:37:25 EEST 2012


[ 0.000000] CPU: ARMv7 Processor [411fc082] revision 2 (ARMv7), cr=10c5387d


[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT nonaliasing instruction cache


[ 0.000000] Machine: Pandora Handheld Console


[ 0.000000] Reserving 8388608 bytes SDRAM for VRAM


[ 0.000000] Memory policy: ECC disabled, Data cache writeback


[ 0.000000] On node 0 totalpages: 61952


[ 0.000000] free_area_init_node: node 0, pgdat c04ae9e0, node_mem_map c04d4000


[ 0.000000] Normal zone: 512 pages used for memmap


[ 0.000000] Normal zone: 0 pages reserved


[ 0.000000] Normal zone: 61440 pages, LIFO batch:15


[ 0.000000] OMAP3430/3530 ES2.1 (l2cache iva sgx neon isp )


[ 0.000000] Clocking rate (Crystal/Core/MPU): 26.0/332/500 MHz


[ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768


[ 0.000000] pcpu-alloc: [0] 0


[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 61440


[ 0.000000] Kernel command line: console=tty1 ramdisk_size=8192 root=/dev/ram0 rw rootfstype=ext2 initrd=0x82321000,8M vram=6272K omapfb.vram=0:3000K


[ 0.000000] PID hash table entries: 1024 (order: 0, 4096 bytes)


[ 0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)


[ 0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)


[ 0.000000] Memory: 242MB = 242MB total


[ 0.000000] Memory: 232388k/232388k available, 29756k reserved, 0K highmem


[ 0.000000] Virtual kernel memory layout:


[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)


[ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)


[ 0.000000] vmalloc : 0xd0800000 - 0xf8000000 ( 632 MB)


[ 0.000000] lowmem : 0xc0000000 - 0xd0000000 ( 256 MB)


[ 0.000000] modules : 0xbf000000 - 0xc0000000 ( 16 MB)


[ 0.000000] .text : 0xc0008000 - 0xc0442c18 (4332 kB)


[ 0.000000] .init : 0xc0443000 - 0xc0473000 ( 192 kB)


[ 0.000000] .data : 0xc0474000 - 0xc04af080 ( 237 kB)


[ 0.000000] .bss : 0xc04af0a4 - 0xc04d3ea4 ( 148 kB)


[ 0.000000] SLUB: Genslabs=11, HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1


[ 0.000000] NR_IRQS:410


[ 0.000000] IRQ: Found an INTC at 0xfa200000 (revision 4.0) with 96 interrupts


[ 0.000000] Total of 96 interrupts on 1 active controller


[ 0.000000] OMAP clockevent source: GPTIMER1 at 32768 Hz


[ 0.000000] sched_clock: 32 bits at 32kHz, resolution 30517ns, wraps every 131071999ms


[ 0.000000] Console: colour dummy device 80x30


[ 0.000000] console [tty1] enabled


[ 0.000701] Calibrating delay loop... 497.82 BogoMIPS (lpj=1941504)


[ 0.039123] pid_max: default: 32768 minimum: 301


[ 0.039489] Mount-cache hash table entries: 512


[ 0.040069] Initializing cgroup subsys devices


[ 0.040161] CPU: Testing write buffer coherency: ok


[ 0.040435] hw perfevents: enabled with ARMv7 Cortex-A8 PMU driver, 5 counters available


[ 0.041381] devtmpfs: initialized


[ 0.050903] print_constraints: dummy:


[ 0.051483] NET: Registered protocol family 16


[ 0.051971] GPMC revision 5.0


[ 0.056396] OMAP GPIO hardware version 2.5


[ 0.061218] omap_mux_init: Add partition: #1: core, flags: 0


[ 0.069854] Reprogramming SDRC clock to 332000000 Hz


[ 0.073028] hw-breakpoint: debug architecture 0x4 unsupported.


[ 0.082916] omap-mcbsp.2: alias fck already exists


[ 0.083374] omap-mcbsp.3: alias fck already exists


[ 0.085418] OMAP DMA hardware revision 4.0


[ 0.107910] bio: create slab <bio-0> at 0


[ 0.109619] print_constraints: vwlan: 1800 mV


[ 0.111877] SCSI subsystem initialized


[ 0.115264] usbcore: registered new interface driver usbfs


[ 0.115631] usbcore: registered new interface driver hub


[ 0.116027] usbcore: registered new device driver usb


[ 0.118011] omap_i2c omap_i2c.1: bus 1 rev1.3.12 at 2600 kHz


[ 0.122070] twl4030: PIH (irq 7) chaining IRQs 368..375


[ 0.122222] twl4030: power (irq 373) chaining IRQs 376..383


[ 0.122955] twl4030: gpio (irq 368) chaining IRQs 384..401


[ 0.123596] _omap_mux_init_gpio: Could not set gpio192


[ 0.125000] _omap_mux_init_gpio: Could not set gpio193


[ 0.128601] print_constraints: VUSB1V5: 1500 mV normal standby


[ 0.129516] print_constraints: VUSB1V8: 1800 mV normal standby


[ 0.130432] print_constraints: VUSB3V1: 3100 mV normal standby


[ 0.132476] twl4030_usb twl4030_usb: Initialized TWL4030 USB module


[ 0.134368] print_constraints: vdd_mpu_iva: 600 <--> 1450 mV normal


[ 0.135284] print_constraints: vdd_core: 600 <--> 1450 mV normal


[ 0.136291] print_constraints: VMMC1: 1850 <--> 3150 mV at 3150 mV normal standby


[ 0.137268] print_constraints: VDAC: 1800 mV normal standby


[ 0.138214] print_constraints: VAUX2: 1800 mV normal standby


[ 0.139190] print_constraints: VPLL2: 1800 mV normal standby


[ 0.140197] print_constraints: VMMC2: 1850 <--> 3150 mV at 2600 mV normal standby


[ 0.141235] print_constraints: VSIM: 2800 mV normal standby


[ 0.142211] print_constraints: VAUX1: 3000 mV normal standby


[ 0.143127] print_constraints: VAUX4: 2800 mV normal standby


[ 0.143859] omap_i2c omap_i2c.3: bus 3 rev1.3.12 at 100 kHz


[ 0.147369] Advanced Linux Sound Architecture Driver Version 1.0.24.


[ 0.148590] Switching to clocksource 32k_counter


[ 0.180877] musb-hdrc: version 6.0, ?dma?, otg (peripheral+host)


[ 0.186309] musb-hdrc: ConfigData=0xde (UTMI-8, dyn FIFOs, bulk combine, bulk split, HB-ISO Rx, HB-ISO Tx, SoftConn)


[ 0.186340] musb-hdrc: MHDRC RTL version 1.400


[ 0.186370] musb-hdrc: setup fifo_mode 4


[ 0.186401] musb-hdrc: 28/31 max ep, 16384/16384 memory


[ 0.187103] musb-hdrc musb-hdrc: USB OTG mode controller at fa0ab000 using DMA, IRQ 92


[ 0.188140] NET: Registered protocol family 2


[ 0.188415] IP route cache hash table entries: 2048 (order: 1, 8192 bytes)


[ 0.188842] TCP established hash table entries: 8192 (order: 4, 65536 bytes)


[ 0.189147] TCP bind hash table entries: 8192 (order: 3, 32768 bytes)


[ 0.189361] TCP: Hash tables configured (established 8192 bind 8192)


[ 0.189392] TCP reno registered


[ 0.189422] UDP hash table entries: 256 (order: 0, 4096 bytes)


[ 0.189483] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)


[ 0.189880] NET: Registered protocol family 1


[ 0.190216] Trying to unpack rootfs image as initramfs...


[ 0.191802] rootfs image is not initramfs (no cpio magic); looks like an initrd


[ 0.259674] Freeing initrd memory: 8192K


[ 0.259735] NetWinder Floating Point Emulator V0.97 (double precision)


[ 0.262054] omap_dsp_init: 600000 bytes @ 8f200000


[ 0.294860] VFS: Disk quotas dquot_6.5.2


[ 0.295501] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)


[ 0.299011] msgmni has been set to 469


[ 0.301727] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)


[ 0.301788] io scheduler noop registered


[ 0.301818] io scheduler deadline registered


[ 0.301879] io scheduler cfq registered (default)


[ 0.315704] OMAP DSS rev 2.0


[ 0.320312] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled


[ 0.323333] omap_uart.0: ttyO0 at MMIO 0x4806a000 (irq = 72) is a OMAP UART0


[ 0.323974] omap_uart.1: ttyO1 at MMIO 0x4806c000 (irq = 73) is a OMAP UART1


[ 0.324554] omap_uart.2: ttyO2 at MMIO 0x49020000 (irq = 74) is a OMAP UART2


[ 0.341400] brd: module loaded


[ 0.350158] loop: module loaded


[ 0.350280] OMAP overclocker loaded.


[ 0.353393] omap2-nand driver initializing


[ 0.353607] NAND device: Manufacturer ID: 0x2c, Chip ID: 0xbc (Micron NAND 512MiB 1,8V 16-bit)


[ 0.354248] Creating 5 MTD partitions on "omap2-nand.0":


[ 0.354309] 0x000000000000-0x000000080000 : "xloader"


[ 0.355346] 0x000000080000-0x000000260000 : "uboot"


[ 0.356597] 0x000000260000-0x000000280000 : "uboot-env"


[ 0.357421] 0x000000280000-0x000000c80000 : "boot"


[ 0.360321] 0x000000c80000-0x000020000000 : "rootfs"


[ 0.460723] usbcore: registered new interface driver libusual


[ 0.461669] mousedev: PS/2 mouse device common for all mice


[ 0.462463] input: keypad as /devices/platform/omap/omap_i2c.1/i2c-1/1-004a/twl4030_keypad/input/input0


[ 0.465393] input: power-button as /devices/platform/omap/omap_i2c.1/i2c-1/1-0049/twl4030_pwrbutton/input/input1


[ 0.466918] input: nub0 as /devices/platform/omap/omap_i2c.3/i2c-3/3-0066/input/input2


[ 0.468658] input: nub1 as /devices/platform/omap/omap_i2c.3/i2c-3/3-0067/input/input3


[ 0.472656] twl_rtc twl_rtc: rtc core: registered twl_rtc as rtc0


[ 0.473388] i2c /dev entries driver


[ 0.481658] OMAP Watchdog Timer Rev 0x31: initial timeout 60 sec


[ 0.482238] twl4030_wdt twl4030_wdt: Failed to register misc device


[ 0.482299] twl4030_wdt: probe of twl4030_wdt failed with error -16


[ 0.483001] voltdm_scale: No voltage scale API registered for vdd_mpu_iva


[ 0.483032] platform mpu.0: omap_target: unable to scale voltage up.


[ 0.483520] cpuidle: using governor ladder


[ 0.483551] cpuidle: using governor menu


[ 0.484283] omap_hsmmc omap_hsmmc.0: multiblock reads disabled due to 35xx erratum 2.1.1.128; MMC read performance may suffer


[ 0.712524] Registered led device: pandora::sd1


[ 0.712829] Registered led device: pandora::sd2


[ 0.713134] Registered led device: pandora::bluetooth


[ 0.713409] Registered led device: pandora::wifi


[ 0.714569] Registered led device: pandora::keypad_bl


[ 0.715484] Registered led device: pandora:ower


[ 0.718139] Registered led device: pandora::charger


[ 0.719543] usbcore: registered new interface driver usbhid


[ 0.719573] usbhid: USB HID core driver


[ 0.722229] OMAP3 Pandora SoC init


[ 0.807342] asoc: twl4030-hifi <-> omap-mcbsp-dai.1 mapping ok


[ 0.808929] asoc: twl4030-hifi <-> omap-mcbsp-dai.3 mapping ok


[ 0.811889] ALSA device list:


[ 0.811920] #0: omap3pandora


[ 0.812133] TCP cubic registered


[ 0.812164] NET: Registered protocol family 17


[ 0.812255] NET: Registered protocol family 15


[ 0.812286] Registering the dns_resolver key type


[ 0.812377] VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 1


[ 0.812438] ThumbEE CPU extension supported.


[ 0.812469] Registering SWP/SWPB emulation handler


[ 0.816192] PM: no software I/O chain control; some wakeups may be lost


[ 1.158752] mmc0: host does not support reading read-only switch. assuming write-enable.


[ 1.160736] mmc0: new high speed SDHC card at address 0003


[ 1.161468] mmcblk0: mmc0:0003 SD8GB 7.41 GiB


[ 1.163635] mmcblk0: p1


[ 1.812896] omap_i2c omap_i2c.1: controller timed out


[ 1.813018] twl: i2c_read failed to transfer all messages


[ 1.813049] _regulator_enable: VSIM: is_enabled() failed: -110


[ 1.813476] clock: disabling unused clocks to save power


[ 1.845520] Console: switching to colour frame buffer device 100x30


[ 2.812988] omap_i2c omap_i2c.1: controller timed out


[ 2.816680] twl: i2c_read failed to transfer all messages


[ 3.813079] omap_i2c omap_i2c.1: controller timed out


[ 3.828735] twl: i2c_read failed to transfer all messages


[ 3.832366] _regulator_enable: VPLL2: is_enabled() failed: -110


[ 3.836120] omapfb omapfb: Failed to enable display 'lcd'


[ 3.839965] omapfb omapfb: failed to initialize default display


[ 3.843902] Console: switching to colour dummy device 80x30


[ 3.845642] omapfb omapfb: failed to setup omapfb


[ 3.845703] omapfb: probe of omapfb failed with error -110


[ 4.836486] omap_i2c omap_i2c.1: controller timed out


[ 4.836578] twl: i2c_read failed to transfer all messages


[ 4.836608] omap_hsmmc omap_hsmmc.1: could not set regulator OCR (-110)


[ 4.990203] mmc2: card claims to support voltages below the defined range. These will be ignored.


[ 4.991729] mmc2: new SDIO card at address 0001


[ 5.836517] omap_i2c omap_i2c.1: controller timed out


[ 5.836608] twl: i2c_read failed to transfer all messages


[ 5.836639] regulator_init_complete: VAUX4: incomplete constraints, leaving on


[ 6.836547] omap_i2c omap_i2c.1: controller timed out


[ 6.851837] twl: i2c_read failed to transfer all messages


[ 6.851867] regulator_init_complete: VAUX1: incomplete constraints, leaving on


[ 7.852050] omap_i2c omap_i2c.1: controller timed out


[ 7.867797] twl: i2c_read failed to transfer all messages


[ 7.867828] regulator_init_complete: VSIM: incomplete constraints, leaving on


[ 8.867828] omap_i2c omap_i2c.1: controller timed out


[ 8.883117] twl: i2c_read failed to transfer all messages


[ 8.883148] regulator_init_complete: VMMC2: incomplete constraints, leaving on


[ 9.884002] omap_i2c omap_i2c.1: controller timed out


[ 9.899627] twl: i2c_read failed to transfer all messages


[ 9.899658] regulator_init_complete: VPLL2: incomplete constraints, leaving on


[ 10.899597] omap_i2c omap_i2c.1: controller timed out


[ 10.913970] twl: i2c_read failed to transfer all messages


[ 10.914001] regulator_init_complete: VAUX2: incomplete constraints, leaving on


[ 11.915069] omap_i2c omap_i2c.1: controller timed out


[ 11.930694] twl: i2c_read failed to transfer all messages


[ 11.930725] regulator_init_complete: VDAC: incomplete constraints, leaving on


[ 12.930603] omap_i2c omap_i2c.1: controller timed out


[ 12.945526] twl: i2c_read failed to transfer all messages


[ 12.945556] regulator_init_complete: VUSB3V1: incomplete constraints, leaving on


[ 13.945922] omap_i2c omap_i2c.1: controller timed out


[ 13.961669] twl: i2c_read failed to transfer all messages


[ 13.961700] regulator_init_complete: VUSB1V8: incomplete constraints, leaving on


[ 14.961639] omap_i2c omap_i2c.1: controller timed out


[ 14.961700] twl: i2c_read failed to transfer all messages


[ 14.961730] regulator_init_complete: VUSB1V5: incomplete constraints, leaving on


[ 14.964935] input: gpio-keys as /devices/platform/gpio-keys/input/input4


[ 15.961730] omap_i2c omap_i2c.1: controller timed out


[ 15.961822] twl: i2c_read failed to transfer all messages


[ 15.961853] twl_rtc: Could not read TWLregister D - error -110


[ 15.961883] twl_rtc twl_rtc: hctosys: unable to read the hardware clock


[ 15.962463] RAMDISK: gzip image found at block 0


[ 16.309234] VFS: Mounted root (ext2 filesystem) on device 1:0.


[ 16.309448] devtmpfs: mounted


[ 16.310028] Freeing init memory: 192K


[ 20.723144] UBI: attaching mtd3 to ubi0


[ 20.723205] UBI: physical eraseblock size: 131072 bytes (128 KiB)


[ 20.723236] UBI: logical eraseblock size: 129024 bytes


[ 20.723266] UBI: smallest flash I/O unit: 2048


[ 20.723266] UBI: sub-page size: 512


[ 20.723297] UBI: VID header offset: 512 (aligned 512)


[ 20.723327] UBI: data offset: 2048


[ 20.745178] UBI: max. sequence number: 815


[ 20.764739] UBI: attached mtd3 to ubi0


[ 20.764801] UBI: MTD device name: "boot"


[ 20.764831] UBI: MTD device size: 10 MiB


[ 20.764862] UBI: number of good PEBs: 78


[ 20.764862] UBI: number of bad PEBs: 2


[ 20.764892] UBI: number of corrupted PEBs: 0


[ 20.764923] UBI: max. allowed volumes: 128


[ 20.764953] UBI: wear-leveling threshold: 4096


[ 20.764953] UBI: number of internal volumes: 1


[ 20.764984] UBI: number of user volumes: 1


[ 20.765014] UBI: available PEBs: 0


[ 20.765045] UBI: total number of reserved PEBs: 78


[ 20.765045] UBI: number of PEBs reserved for bad PEB handling: 2


[ 20.765075] UBI: max/mean erase counter: 48/34


[ 20.765106] UBI: image sequence number: 869581226


[ 20.768676] UBI: background thread "ubi_bgt0d" started, PID 738


[ 20.816528] UBIFS: recovery needed


[ 20.900329] UBIFS: recovery completed


[ 20.900360] UBIFS: mounted UBI device 0, volume 0, name "boot"


[ 20.900421] UBIFS: file system size: 8128512 bytes (7938 KiB, 7 MiB, 63 LEBs)


[ 20.900451] UBIFS: journal size: 1032193 bytes (1008 KiB, 0 MiB, 6 LEBs)


[ 20.900482] UBIFS: media format: w4/r0 (latest is w4/r0)


[ 20.900512] UBIFS: default compressor: lzo


[ 20.900543] UBIFS: reserved for root: 383929 bytes (374 KiB)


[ 28.742431] UBIFS: un-mount UBI device 0, volume 0


[ 28.764739] UBI: mtd3 is detached from ubi0


----------


+ . /etc/updater_funcs.sh


+ LOG_TTY=3


+ LOG_DEVICE=/dev/tty3


+ status_uboot=missing


+ status_uboot_env=already empty


+ status_uimage=missing


+ status_rootfs=missing


+ mkdir /mnt/ubifs


+ [ ! -e /dev/mmcblk0p1 ]


+ mdevs=/dev/mmcblk0p1 /dev/mmcblk0p2


+ bootfiles=bootf.tgz bootfiles.tar.gz uimage.tar.gz


+ cd /tmp


+ basename /dev/mmcblk0p1


+ mpoint=/mnt/mmcblk0p1


+ keep_mpoint=no


+ mkdir /mnt/mmcblk0p1


+ mount /dev/mmcblk0p1 /mnt/mmcblk0p1


+ [ -x /mnt/mmcblk0p1/initialize.sh ]


+ [ -e /mnt/mmcblk0p1/bootf.tgz ]


+ tar xzvf /mnt/mmcblk0p1/bootf.tgz


autoboot.txt


bootmenu.txt


u-boot.bin


uImage


uImage-2.6.27.57-omap1


uImage-3


+ [ -e /mnt/mmcblk0p1/bootfiles.tar.gz ]


+ [ -e /mnt/mmcblk0p1/uimage.tar.gz ]


+ [ -x /mnt/mmcblk0p1/finalize.sh ]


+ [ -e /mnt/mmcblk0p1/rootfs.img -a -e /mnt/mmcblk0p1/rootfs.md5 -a -z ]


+ rootfs_file=/mnt/mmcblk0p1/rootfs.img


+ + cut -c 1-32head


-n 1 /mnt/mmcblk0p1/rootfs.md5


+ rootfs_md5=fb136149154683fa0a5e6cd78d77e881


+ rootfs_mpoint=/mnt/mmcblk0p1


+ keep_mpoint=yes


+ [ yes != yes ]


+ basename /dev/mmcblk0p2


+ mpoint=/mnt/mmcblk0p2


+ keep_mpoint=no


+ mkdir /mnt/mmcblk0p2


+ mount /dev/mmcblk0p2 /mnt/mmcblk0p2


mount: mounting /dev/mmcblk0p2 on /mnt/mmcblk0p2 failed: No such file or directory


+ continue


+ [ -e u-boot.bin ]


+ stat -c %s u-boot.bin


+ size=524288


+ nanddump --omitoob --omitbad -q -l 524288 -f u-boot.bin.flashed /dev/mtd1ro


+ cmp u-boot.bin u-boot.bin.flashed


cmp: EOF on u-boot.bin.flashed


+ flash_eraseall /dev/mtd1


Erasing 128 Kibyte @ 0 -- 0 % complete.


Erasing 128 Kibyte @ 20000 -- 6 % complete.


Erasing 128 Kibyte @ 40000 -- 13 % complete.


Skipping bad block at 0x00060000


Erasing 128 Kibyte @ 80000 -- 26 % complete.


Erasing 128 Kibyte @ a0000 -- 33 % complete.


Erasing 128 Kibyte @ c0000 -- 40 % complete.


Erasing 128 Kibyte @ e0000 -- 46 % complete.


Erasing 128 Kibyte @ 100000 -- 53 % complete.


Erasing 128 Kibyte @ 120000 -- 60 % complete.


Erasing 128 Kibyte @ 140000 -- 66 % complete.


Erasing 128 Kibyte @ 160000 -- 73 % complete.


Erasing 128 Kibyte @ 180000 -- 80 % complete.


Erasing 128 Kibyte @ 1a0000 -- 86 % complete.


Erasing 128 Kibyte @ 1c0000 -- 93 % complete.


Erasing 128 Kibyte @ 1e0000 -- 100 % complete.


+ nandwrite -p /dev/mtd1 u-boot.bin


Bad block at 60000, 1 block(s) from 60000 will be skipped


Writing data to block 0 at offset 0x0


Writing data to block 1 at offset 0x20000


Writing data to block 2 at offset 0x40000


Writing data to block 3 at offset 0x60000


Writing data to block 4 at offset 0x80000


+ log u-boot.bin flashed.


+ echo u-boot.bin flashed.


u-boot.bin flashed.


+ echo u-boot.bin flashed.


+ status_uboot=flashed


+ nanddump --omitoob --omitbad -q -f mtd2dump /dev/mtd2ro


+ cmp mtd2dump /usr/local/erasednandblk


+ ubiattach /dev/ubi_ctrl -m 3


UBI device number 0, total 78 LEBs (10063872 bytes, 9.6 MiB), available 0 LEBs (0 bytes), LEB size 129024 bytes (126.0 KiB)


+ mount -t ubifs ubi0:boot /mnt/ubifs


+ handle_kernels


+ ls uImage uImage-2.6.27.57-omap1 uImage-3


+ kernels=uImage


uImage-2.6.27.57-omap1


uImage-3


+ [ -z uImage


uImage-2.6.27.57-omap1


uImage-3 ]


+ cmp uImage /mnt/ubifs/uImage


+ log uImage already flashed, skipped.


+ echo uImage already flashed, skipped.


uImage already flashed, skipped.


+ echo uImage already flashed, skipped.


+ status_uimage=already there


+ cmp uImage-2.6.27.57-omap1 /mnt/ubifs/uImage-2.6.27.57-omap1


+ log uImage-2.6.27.57-omap1 already flashed, skipped.


+ echo uImage-2.6.27.57-omap1 already flashed, skipped.


uImage-2.6.27.57-omap1 already flashed, skipped.


+ echo uImage-2.6.27.57-omap1 already flashed, skipped.


+ status_uimage=already there


+ cmp uImage-3 /mnt/ubifs/uImage-3


+ log uImage-3 already flashed, skipped.


+ echo uImage-3 already flashed, skipped.


uImage-3 already flashed, skipped.


+ echo uImage-3 already flashed, skipped.


+ status_uimage=already there


+ [ -e bootmenu.txt ]


+ cmp bootmenu.txt /mnt/ubifs/bootmenu.txt


+ [ -e autoboot.txt ]


+ cmp autoboot.txt /mnt/ubifs/autoboot.txt


+ umount /mnt/ubifs


+ ubidetach /dev/ubi_ctrl -d 0


+ [ -n /mnt/mmcblk0p1/rootfs.img ]


+ log Calculating checksum, this might take a few minutes..


+ echo Calculating checksum, this might take a few minutes..


Calculating checksum, this might take a few minutes..


+ echo Calculating checksum, this might take a few minutes..


+ + md5sumcut /mnt/mmcblk0p1/rootfs.img -c


1-32


+ real_md5=2180aa90d82992ff52339fe9d9711205


+ [ 2180aa90d82992ff52339fe9d9711205 = fb136149154683fa0a5e6cd78d77e881 ]


+ log INCORRECT


+ echo INCORRECT


INCORRECT


+ echo INCORRECT


+ cleanup


+ cd /tmp


+ [ -n ]


+ [ -n /mnt/mmcblk0p1 ]


+ umount /mnt/mmcblk0p1


+ false

 

[Linux-SWAT]

Try this one:


http://openpandora.free.fr/openpandora/temp/SuperZaxxonFinal.zip

 

[delicator]

hello


thanks, i try again,


the checksum :


083b4bc191a07435b51fd8d449b63df5 Angstrom-pandora-xfce-image-glibc-ipk-2010.4-test-20120703-omap3-pandora.ubifs.img


md5sum rootfs.img


083b4bc191a07435b51fd8d449b63df5 rootfs.img


and it's the same...


The screen is black, and, I need to reboot the pandora, after that, nothing appends...

 

[delicator]

I check the checksum in the sd card, and it was bad, so I copy again, I try again with the right file, with the good checksum, and it's the same...


Can i find an old firmawre to try ?

 

[A2000]

Look here:

 

[delicator]

yes i read, i try but nothing


When "Booting kernel" appear, the screen goes black, I see the backlight, but nothing else...


I'll try another day, again, at the begining...


If someone have an old firmware, i'll take it !

 

[Linux-SWAT]

The supposedly copied-on-SD firmware may seems to have the right checksum, but if you remove and put back the card, you will probably seem a wrong one.


Can you try please ?

 

[delicator]

I have this in the card


the rootfs.md5


fb136149154683fa0a5e6cd78d77e881 Angstrom-pandora-xfce-image-glibc-ipk-2010.4-test-20120719-omap3-pandora.rootfs.tar.bz2


it's normal ?


I unplung et plug again the sd card, the checksum is


083b4bc191a07435b51fd8d449b63df5 rootfs.img


it seem's the rootfs.md5 file is changing...

 

[Linux-SWAT]

I can't say more than try another card :/.

 

[delicator]

I try with 4 card... and 2 pc, with 2 different os...


perhaps i missing something idiot...


but can you tell me exactly what is the wright way, when it's ok, how act the pandora when I choose boot from sd1 ?

 

[Linux-SWAT]

Can you tell me the exact and precise specs of each cards ?


When you flash the firmware, all stuff goes automatically, finishing with a "press enter to power down".

 

[delicator]

i'v kingston ultimate 100x 32 and 8go


pny 8go optima


kingston 512 elite pro


and toshiba 512


When I boot on the sd card, I see sd led flashing, but after "booting kernel" i don't have anything on the screen, I wait long time, to try, and press enter blind, but nothing append


I try to format sd card, under ubuntu, and windows7 and with the sd formatter tool...