With Wind-ups


if you want to run it as the defult program you need to flash your bios to Mr. Spiv's Multifirmware 2, you can then run windups as soon as the gp32 is turned on. Otherwise it's just run through freelauncher like anyother.fxe
 
When you turn on your gp32 hold select. It should pop up with mr spivs multi-firmware. Chose wind-ups. If you bought your gp32 from GBAx before December then wind-ups is already installed.
 
"if you want to run it as the defult program you need to flash your bios to Mr. Spiv's Multifirmware 2, you can then run windups as soon as the gp32 is turned on. Otherwise it's just run through freelauncher like anyother.fxe"


how do i do that?
:blink:
 
VINTENDO read this.....

On mine this is how i set-up windups and set it as my default.

1. Turn off GP32.
2. While off hold SELECT.
3. Turn on GP32 while still holding SELECT.
4. Mr Spivs Multifirmware selector should load.
5. Go down to Windups and press B.
6. It loads Windups, great.
7. Now turn off your GP32 and then turn it back on again as normal without holding anything.
8. It should load Windups automatically.
 
WTF?!?!? im following the instructions on Firmware Flashing On The GP32 and nothing pops up. PLEASE someone help me! if you have AIM my S/N is gamegear45 or if you have Windows Messenger my S/N is vintendo.
 
Back
Top