Manual: Difference between revisions - Pyra Wiki

(Created page with "Info assembled from inclusions from other pages so that its always updated. Mostly Hw and Sw categories. For example assembly/disassembly from repairs. Screenshots of every in...")
 
No edit summary
Line 1: Line 1:
Info assembled from inclusions from other pages so that its always updated. Mostly Hw and Sw categories. For example assembly/disassembly from repairs. Screenshots of every installed app.
Info assembled from inclusions from other pages so that its always updated. Mostly Hw and Sw categories. For example assembly/disassembly from repairs. Screenshots of every installed app.
== Software ==
=== Reflashing a Pyra ===
Sometimes you've played with your pyra so much that you need to start again. With a spare SD card, we have you covered.<ref>https://pyra-handheld.com/boards/threads/first-information-for-new-pyra-owners-faq.99302/post-1686480 Based on forum information</ref>
# Grab the latest image from https://packages.pyra-handheld.com/images/buster/ (currently https://packages.pyra-handheld.com/images/buster/test33-install.img.7z)
# Extract that 7z file to get an .img file
# Write that image file to an SD card with something like [https://www.balena.io/etcher/ etcher]. '''This will erase everything on the SD card'''
# Insert SD card into Pyra left SD card slot
# Power on, and it should start flashing. '''This will erase everything on the internal drive of the Pyra'''
From there, power off when it tells you, eject the SD card, power back on, and you should get to the first-run setup stuff.

Revision as of 23:36, 17 January 2021

Info assembled from inclusions from other pages so that its always updated. Mostly Hw and Sw categories. For example assembly/disassembly from repairs. Screenshots of every installed app.


Software

Reflashing a Pyra

Sometimes you've played with your pyra so much that you need to start again. With a spare SD card, we have you covered.[1]

  1. Grab the latest image from https://packages.pyra-handheld.com/images/buster/ (currently https://packages.pyra-handheld.com/images/buster/test33-install.img.7z)
  2. Extract that 7z file to get an .img file
  3. Write that image file to an SD card with something like etcher. This will erase everything on the SD card
  4. Insert SD card into Pyra left SD card slot
  5. Power on, and it should start flashing. This will erase everything on the internal drive of the Pyra

From there, power off when it tells you, eject the SD card, power back on, and you should get to the first-run setup stuff.

Back
Top