Frequently Asked Questions

Overview

To get a general idea of what's in the Pyra, check out the Dragonbox Pyra page.

What's the current development status?

What we're doing (as of October 26, 2020) is:

• Preassemble as many Pyras up to the state that only the mainboard and CPU boards need to be put in (so Lid, DisplayBoard, magnet, logo, LCD Cable, Hinge, speakers, keymar) as possible
• Once everything is here, send out the emails to the preorders to finish the order. Then finish the assembly with the correct color and ship it.

The preassembly is most of the work. Putting in the boards and closing it up is pretty fast.

Who's ED?

You've probably seen this on the forums. It's the digrammaton for our benevolent dictator EvilDragon.

What to expect when booting Pyra for the first time

First Run Wizard

After booting, the screen will look something like this. Further refinements to be developed by various members of the community. The first run wizard will walk you through creating a user, setting a password, and the usual keyboard setup.

Help, I'm a Linux n00b!

That's no problem. As Debian Linux comes pre-installed, you won't have any Driver problems and care is taken to make the System Beginner-friendly. Also you can always ask at the Forums.

What software is available for the Pyra?

How do I install software?

The default Pyra OS is based on Debian, which allows for simple installs/upgrades.

For CPU/GPU-intensive programs such as games, however, the standard Debian packages won't be optimized well for the Pyra hardware. Like the Pandora community repository, there will be a Pyra repository which utilizes the DBP (DragonBox Package) format. Check out the DBP install instructions.

When will the GPU be fully utilizable?

It is working as of the 29th of June, 2016.

When will the phone software be ready?

When someone gets around to porting this stuff. It may be a couple months (or longer) after the first preorder Pyras arrive in people's pockets.

Hardware questions

What carrier compatibility is there with the Pyra cell module?

The Pyra has a GSM module, so just say no to CDMA carriers. Check Carrier Compatibility for help/discussion for the country you reside in. But please note, compatible carriers would still likely have to approve the use of the Pyra on their networks.

How can I get the Pyra working on one of the compatible networks?

You may have to call or talk to someone about it, give them the device information, etc.

Can I turn off data and use the Pyra as a dumb phone?

For the above carriers, probably, if/when they allow the device on the network, and if/when the software will be ready.

Should I get 2GB or 4GB RAM?

Is bigger always better? Simple GNU/Linux distributions (such as the default Pyra OS) do not require the 1 to 2 GB of memory that other proprietary OSes require, so most of the 2 GB will be available to the user, and this will be sufficient for the vast majority of Pyra software and use-cases. For a demonstration trying to push a Pyra devboard to its limits, check out this video, which doesn't break 2 GB of RAM usage. For most users, 2GB RAM will be more advantageous: both economically, and in battery life.

If you want to do things like run your OS in RAM (a la Puppy Linux), run heavy audio/video processing workloads, or play other memory-intensive games (e.g. Minecraft-type games), 4 GB might be right for you.

Why is there not a camera?

At the time of development, all available camera modules are too thick (front to back) to fit inside the lid without enlarging the (already quite thick) case. Putting a camera in the base would result in an awkward and unusable camera angle.

Concerns were also raised about:

• The utility of a small, low-performance camera
• Privacy implications
• Cost

A thread about adding a camera: Camera thread

Why not include hardware X on the Pyra?

The reason(s) may include but not be limited to:

• Limited funding
• Limited resources
• Need small minimum order quantities (MOQ) for a niche coummunity's production run, with linux drivers and decent design support
• Potential future upgrades/versions to add it
• Current expected specs are adequate for MOST of the existing community
• Feature creep would mean the Pyra would never get released
• EvilDragon made his decision to not include it

The Pyra will be a modular, hackable device. Just as the Pandora has been lovingly modded, there will be creative solutions to get the most out of the Pyra. The hardware designs for the Pyra are also expected to be open-sourced, so anything is possible in terms of homebrew hardware development.

Why use ARM instead of x86?

There are many reasons, some mentioned above, and still more:

• Many emulators and programs work better on the Pandora than on their equivalent mobile x86 computers (REFERENCE??), because the algorithms have been optimized for ARM. This will be the same for the Pyra. (See algorithms are technology.)
• Most x86 developers target desktop computers, which the Pyra is not. This results in a bit of laziness in optimizing the program, which will make it run slower on the Pyra. (And since the developers aren't targeting mobile usage, they probably won't optimize it.) This would make a lot of people unhappy, if they realized their desktop games couldn't be played on the device without some tweaks.
• ARM makes it easier to make Android work.
• Most Linux programs don't need x86 to run; just recompile to ARM.
• While Intel is bringing back their Atom line, their power consumption is still quite high for a mobile device. Perhaps this won't be as big of a concern in the future, but ED doesn't like his handhelds hot.

Intel processors were considered, but ARM was chosen in the end. A future x86 module could be possible, if there is enough interest. But there is no real performance hit when using ARM in Linux, and instead a gain in certain games and emulators due to better-optimized algorithms.

What's this about eSATA?

eSATA is provided via the unused Pins from the USB 3.0 Port.See: Storage