Battery: Difference between revisions
Jump to navigation
Jump to search
No edit summary |
m (103AT NTC thermistor) |
||
| (3 intermediate revisions by 3 users not shown) | |||
| Line 5: | Line 5: | ||
*6Ah Li-Po battery (at a nominal 3.7V, for approximately 22Wh) | *6Ah Li-Po battery (at a nominal 3.7V, for approximately 22Wh) | ||
*Can be charged in the Pyra using either of two microUSB ports (one carries USB3.0 otg, the other serial debug data) | *Can be charged in the Pyra using either of two microUSB ports (one carries USB3.0 otg, the other serial debug data) | ||
* | * Includes 103AT NTC (10K thermistor) for thermal safety on middle / ground contacts | ||
* When it is plugged in, it works [https://pyra-handheld.com/boards/threads/gpd-pocket-2-announced.82987/page-3#post-1437934 like an offline UPS.] | |||
=== Battery life === | === Battery life === | ||
| Line 14: | Line 15: | ||
=== Charger === | === Charger === | ||
The Pyra will charge from a standard | The Pyra will charge from a standard microUSB2 cable, much in the same way as any other (non-apple) portable device made in the last few years. | ||
Sample of [https://twitter.com/EvilDragon1717/status/565822058530340864/photo/1 potentially official charger] | Sample of [https://twitter.com/EvilDragon1717/status/565822058530340864/photo/1 potentially official charger], but as USB power warts are so common, it has been decided to not offer one in the Pyra box, to reduce waste. | ||
See also [[USB]] | |||
=== Hardware === | |||
* [https://www.mouser.co.uk/ProductDetail/Texas-Instruments/BQ27421YZFR-G1D?qs=%2Fha2pyFaduh5RDOxfpEUw4T4VPXZAbWzRAKxY9CzmNpr9gvZux9faA%3D%3D BQ27421YZFR-G1D] - I2C (addr 0x55) Battery monitor - System-Side ImpedanceTrack™ Fuel Gauge With Integrated Sense Resistor | |||
** Used to measure "VBATT" | |||
* [https://www.mouser.co.uk/ProductDetail/AVX/009155003201006?qs=K5l8tOnjbWPMTItNKAuZ0A%3D%3D&gclid=EAIaIQobChMI4ZK6_7fb7wIVASIYCh2HEgOZEAAYASAAEgLMTfD_BwE AVX 009155003201006] - Battery Contacts 3Way .4um Ht=3mm 3A 2.5mm Pitch Rdc Size | |||
The battery itself is custom designed and manufacturerd specfically for the Pyra project. | |||
</onlyinclude> | </onlyinclude> | ||
Latest revision as of 20:05, 13 April 2021
Features and specifications
- Battery is easily removable and replaceable (though no hot swapping?)
- 6Ah Li-Po battery (at a nominal 3.7V, for approximately 22Wh)
- Can be charged in the Pyra using either of two microUSB ports (one carries USB3.0 otg, the other serial debug data)
- Includes 103AT NTC (10K thermistor) for thermal safety on middle / ground contacts
- When it is plugged in, it works like an offline UPS.
Battery life
- Everyday work load: 8 hours (without any power management features, tested on prototype April 2016)
- Everything on (Bluetooth, WiFi, etc.): TBD
- Display off, audio on: TBD
- Suspend mode (display off, audio off, CPU running): TBD
Charger
The Pyra will charge from a standard microUSB2 cable, much in the same way as any other (non-apple) portable device made in the last few years.
Sample of potentially official charger, but as USB power warts are so common, it has been decided to not offer one in the Pyra box, to reduce waste.
See also USB
Hardware
- BQ27421YZFR-G1D - I2C (addr 0x55) Battery monitor - System-Side ImpedanceTrack™ Fuel Gauge With Integrated Sense Resistor
- Used to measure "VBATT"
- AVX 009155003201006 - Battery Contacts 3Way .4um Ht=3mm 3A 2.5mm Pitch Rdc Size
The battery itself is custom designed and manufacturerd specfically for the Pyra project.