Am Sun, 1 Mar 2015 22:47:19 +0100 hat "Dr. H. Nikolaus Schaller" hns@goldelico.com geschrieben:
Hi,
With quick browsing, I couldn't find how to switch to Orise mode - do you know that?
Yes, by this magic 0ff 12 83 01 sequence. The data sheet is a little confusing what „Orise mode“ is. And that was the problem why we initially did not understand how to program the panel.
Okay, so both of them will only work when we can switch the panel to Orise mode automatically on power-up, understood.
We should check how well the stuff from the SSD works, what features the panel has and then decide what we really need.
Well, before we can do that, the SSD should work at all :)
Yes, sure :) Did you try playing with the new commands we received on Friday?
I tried to get the SSD to respond, but did not see anything. So there might be something broken in my current setup. Haven’t analysed deeper. Maybe, the timing of the OMAP is sufficient for the direct panel connection but not for the SSD. AFAIR, there were some changes after the last real SSD experiments.
With a little luck we will have 3 more SSD boards by end of next week.
Oh, not even a response at all? You can't even read registers or use the debug information?
That's a bummer... but wasn't that working before? Or didn't you try that before?
The hardware wiring is done correctly?